search

arendst / Tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
https://tasmota.github.io/docs
GNU General Public License v3.0
22.19k stars 4.81k forks source link

Can't connect to wifi or reset power strip. #5942

Closed TPISC89 closed 5 years ago

TPISC89 commented 5 years ago
### ISSUE DESCRIPTION - TROUBLESHOOTING _A clear description of what the issue is and be as extensive as possible_ ### REQUESTED INFORMATION _Make sure these boxes are checked before submitting your issue. Thank you_ **FAILURE TO COMPLETE THE REQUESTED INFORMATION WILL RESULT IN YOUR ISSUE BEING CLOSED** - [x] Read the [Contributing Guide and Policy](https://github.com/arendst/Sonoff-Tasmota/blob/development/CONTRIBUTING.md) and [the Code of Conduct](https://github.com/arendst/Sonoff-Tasmota/blob/development/CODE_OF_CONDUCT.md) - [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues) - [x] Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting) - [x] Searched the problem in the forum (https://groups.google.com/d/forum/sonoffusers) - [x] Searched the problem in the chat (https://discord.gg/Ks2Kzd4) - [x] Device used (i.e. Sonoff Basic) : Power strips similar to [https://blakadder.github.io/templates/XS-A25.html](url) - [ ] Tasmota binary firmware version number used : ____ / (pre-compiled or self-compiled ?) - [ ] Development IDE - Compiler / Upload tools used : ____ / ____ - [ ] Provide the output of command ``status 0`` : Hi, I am newbie in with Tasmota. I have successfully flashed my power strips to Tasmota 6.5 with Tuya-convert method. I was be able to follow the template https://blakadder.github.io/templates/XS-A25.html to get all the leds and toggles to work correctly. However, the button didn't work as expected. If I remember correctly, I change it from {"NAME":"XS-A25","GPIO":[52,0,53,0,25,22,0,0,24,**17**,23,21,0],"FLAG":0,"BASE":18} to {"NAME":"XS-A25","GPIO":[52,0,53,**17**,25,22,0,0,24,**0**,23,21,0],"FLAG":0,"BASE":18} I restarted and now it's no longer working and I can't connect to my wifi as well. the 40 seconds holding power button does not work. Do I still have a chance to do factory reset? or flash it again? Thank you so much.
Jason2866 commented 5 years ago

Please, address this to the Tasmota Support Chat. The chat is a better and more dynamic channel for helping you. Github issues are meant for Tasmota Software Bug Reporting.

Please check the Contributing Guideline and Policy and the Support Guide.

Thanks.

Support Information

See Wiki for more information. See Chat for more user experience. See Community for forum. See Code of Conduct