Closed Hedda closed 4 years ago
This issue has been automatically closed because the issue template is missing or incomplete. Filling the template is required so standard questions don't need to be asked again each time. Our ability to provide assistance is greatly hampered if few minutes are not taken to complete the issue template with the requested information. The details requested potentially affect which options to pursue. The small amount of time you will spend completing the template will also help the volunteers, providing assistance to you, to reduce the time required to help you. Please, could you be so kind on completing the issue template in order to have more information so as to properly help you? Thank you for taking the time to report, hopefully it can be resolved soon. Support Information Wiki for more information. Chat for more user experience. Community for forum. Code of Conduct Contributing Guideline and Policy
Please consider porting Tasmota/Zigbee2Tasmota to the new Sonoff Zigbee Bridge (Sonoff ZBBridge)
https://www.itead.cc/sonoff-zbbridge.html
Itead has just launched Sonoff ZBBridge as an inexpensive Sonoff Zigbee Bridge which is based on a similar design as the Sonoff RF Bridge 433
https://www.itead.cc/sonoff-zbbridge.html
According to the teardown on notenoughtech.com it sounds as if it is based on Silicon Labs EFR32 (Mighty Gecko) for Zigbee 3.0 radio module support and ESP8266 for WiFi and bridge/gateway/controller software
https://notenoughtech.com/home-automation/sonoff/sonoff-zigbee-bridge-preview/
From the images it even looks like they are reusing the same injection moulds as for the Sonoff RF Bridge 433 housing/enclosure
https://sonoff.tech/product/accessories/433-rf-bridge
https://www.itead.cc/sonoff-rf-bridge-433.html
https://www.itead.cc/wiki/Sonoff_RF_Bridge_433
EZSP serial protocol interface that Silicon Labs uses is also well documented and already used by open source projects, see example Home Assistant's ZHA integration component via zigpy and bellows:
https://github.com/zigpy/bellows
https://www.home-assistant.io/integrations/zha/
Tasmota does something similar with Zigbee2Tasmota but by connecting an ESP8266 to a Texas Instrument CC2530 module instead however it too is using a serial communication protocol, see:
https://tasmota.github.io/docs/Zigbee/