Closed yury-sannikov closed 4 years ago
This issue has been automatically closed because the issue template is missing or incomplete. Filling the template is required so standard questions don't need to be asked again each time. Our ability to provide assistance is greatly hampered if few minutes are not taken to complete the issue template with the requested information. The details requested potentially affect which options to pursue. The small amount of time you will spend completing the template will also help the volunteers, providing assistance to you, to reduce the time required to help you. Please, could you be so kind on completing the issue template in order to have more information so as to properly help you? Thank you for taking the time to report, hopefully it can be resolved soon. Support Information Wiki for more information. Chat for more user experience. Community for forum. Code of Conduct Contributing Guideline and Policy
What, really? Nobody replied? Please, at least make a clearer instructiuon on how to setup everything :) I see on this page https://tasmota.github.io/docs/OpenTherm/ that we need to add a line to a specific file and compile our own firmware. Also, there is something mentioned about gpio0, but I do not understand what it means by "The integration attaches ISR to the RX GPIO to avoid pooling. That GPIO should support interrupts. Please consider this while working on the schematics."
Please, see above, there is a link to the complete issue. You just reached an empty issue closed by the bot because the issue template was deleted while opening. Another issue with the same title (linked above) was submitted and all the discussion is there. Check that please. Thanks.
Hi here. I made an OpenTherm integration for my home project. I can be used with https://github.com/jpraus/arduino-opentherm or http://ihormelnyk.com/opentherm_adapter boards, but not with OTG.
Is there any interest in such integration so I invest some time to prepare a PR against the tasmota repo?
https://github.com/yury-sannikov/Sonoff-Tasmota-Dimmer/blob/8.2.0_local_ot/tasmota/xsns_85_opentherm.ino https://github.com/yury-sannikov/Sonoff-Tasmota-Dimmer/blob/8.2.0_local_ot/tasmota/xsns_85_opentherm_protocol.ino
Also, have HomeAssistant complimentary component https://github.com/yury-sannikov/ha-mqtt-water-heater to wire it up if someone needed.