"WebSend":"Connect failed"

've just flashed my Sonoff bridge with tasmota and I'm trying to get my 8 switch RF controller to work with it on Samsung Smartthings hub. Everything seemed to be going well until I got to the part where I need to copy and paste de command codes over to the ST app. Here's what it show in the console box:

15:47:43 RUL: RFRECEIVED#RFKEY performs "WebSend [0.0.0.0:0] /?json={"RfReceived":{"RfKey":"1"}}"
15:47:49 RSL: RESULT = {"WebSend":"Connect failed"}

I have done the learning process of the buttons, that's why it says "RfKey":"1", but I don't know why it returns as "Connect Failed" and not "Done". Also, I'm not quite sure if the [0.0.0.0:0] is correct and, if it isn't I do not know how to change it and what to put it its place.

PROBLEM DESCRIPTION

A clear and concise description of what the problem is. Command "WebSend" not going through.

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

[x ] Read the Contributing Guide and Policy and the Code of Conduct
[x ] Searched the problem in issues
[x ] Searched the problem in the docs
[x ] Searched the problem in the forum
[ x] Searched the problem in the chat
[x ] Device used (e.g., Sonoff Basic): Sonoff RF Bridge
[ x] Tasmota binary firmware version number used: 8.5.0
- [ x] Pre-compiled
- [ ] Self-compiled
- [ ] IDE / Compiler used: _____
[x ] Flashing tools used: Tasmotizer

[x ] Provide the output of command: Backlog Template; Module; GPIO 255:


Configuration output here:
18:40:12 CMD: Backlog Template; Module; GPIO 255
18:40:12 RSL: stat/tasmota_C23DBA/RESULT = {"NAME":"Sonoff Bridge","GPIO":[17,148,255,149,255,255,0,0,255,56,255,0,0],"FLAG":0,"BASE":25}
18:40:12 RSL: stat/tasmota_C23DBA/RESULT = {"Module":{"0":"Sonoff Bridge"}}
18:40:13 RSL: stat/tasmota_C23DBA/RESULT = {"GPIO0":{"17":"Button1"},"GPIO1":{"148":"Serial Tx"},"GPIO2":{"0":"None"},"GPIO3":{"149":"Serial Rx"},"GPIO4":{"0":"None"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"56":"Led1i"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"}}

- [x ] If using rules, provide the output of this command: `Backlog Rule1; Rule2; Rule3`:

Rules output here: 18:41:38 CMD: Backlog Rule1; Rule2; Rule3 18:41:38 RSL: stat/tasmota_C23DBA/RESULT = {"Rule1":"ON","Once":"OFF","StopOnError":"OFF","Length":179,"Free":332,"Rules":"ON RfReceived#Data DO WebSend [0.0.0.0:0] /?json={\"RfReceived\":{\"Data\":\"%value%\"}} ENDON ON RfReceived#RfKey DO WebSend [0.0.0.0:0] /?json={\"RfReceived\":{\"RfKey\":\"%value%\"}} ENDON"} 18:41:38 RSL: stat/tasmota_C23DBA/RESULT = {"Rule2":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""} 18:41:38 RSL: stat/tasmota_C23DBA/RESULT = {"Rule3":"OFF","Once":"OFF","StopOnError":"OFF","Length":0,"Free":511,"Rules":""}

- [x ] Provide the output of this command: `Status 0`:

STATUS 0 output here: 18:42:07 CMD: Status 0 18:42:07 RSL: stat/tasmota_C23DBA/STATUS = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_C23DBA","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS1 = {"StatusPRM":{"Baudrate":19200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:11:17","StartupUTC":"2020-09-18T17:30:50","Sleep":50,"CfgHolder":4617,"BootCount":13,"BCResetTime":"2020-09-18T14:43:17","SaveCount":33,"SaveAddress":"F7000"}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS2 = {"StatusFWR":{"Version":"8.5.0(tasmota)","BuildDateTime":"2020-09-09T11:41:02","Boot":31,"Core":"2_7_4_1","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8285","CR":"377/699"}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["NET CASA 9 2G",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C8000100060000005A00000000000000","00000000","00006000","00000000"]}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS4 = {"StatusMEM":{"ProgramSize":595,"Free":408,"Heap":26,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"144051","FlashFrequency":40,"FlashMode":3,"Features":["00000809","8FDAE797","04368001","000000CD","010013C0","C000F981","00004004","00000000"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS5 = {"StatusNET":{"Hostname":"tasmota_C23DBA-7610","IPAddress":"192.168.0.32","Gateway":"192.168.0.1","Subnetmask":"255.255.255.0","DNSServer":"189.5.128.114","Mac":"E0:98:06:C2:3D:BA","Webserver":2,"WifiConfig":4,"WifiPower":17.0}} 18:42:07 RSL: stat/tasmotaC23DBA/STATUS6 = {"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES%06X","MqttClient":"DVES_C23DBA","MqttUser":"DVES_USER","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS7 = {"StatusTIM":{"UTC":"2020-09-18T17:42:07","Local":"2020-09-18T18:42:07","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+01:00","Sunrise":"06:31","Sunset":"18:56"}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS10 = {"StatusSNS":{"Time":"2020-09-18T18:42:07"}} 18:42:07 RSL: stat/tasmota_C23DBA/STATUS11 = {"StatusSTS":{"Time":"2020-09-18T18:42:07","Uptime":"0T00:11:17","UptimeSec":677,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Wifi":{"AP":1,"SSId":"NET CASA 9 2G","BSSId":"98:1E:19:12:F7:8A","Channel":1,"RSSI":92,"Signal":-54,"LinkCount":1,"Downtime":"0T00:00:06"}}}

- [ x] Provide the output of the Console log output when you experience your issue; if applicable:
  _(Please use_ `weblog 4` _for more debug information)_

Console output here: 18:42:52 CMD: weblog 4 18:42:52 RSL: stat/tasmota_C23DBA/RESULT = {"WebLog":4} 18:42:53 CFG: Saved to flash at F6, Count 34, Bytes 4096 18:43:07 WIF: Checking connection... 18:43:27 WIF: Checking connection... 18:49:02 DMP: A4 1E 14 01 22 02 DA BD DB E8 55 18:49:02 RSL: tele/tasmota_C23DBA/RESULT = {"Time":"2020-09-18T18:49:02","RfReceived":{"Sync":7700,"Low":290,"High":730,"Data":"BDDBE8","RfKey":1}} 18:49:02 RUL: RFRECEIVED#DATA performs "WebSend [0.0.0.0:0] /?json={"RfReceived":{"Data":"BDDBE8"}}" 18:49:02 SRC: Rule 18:49:02 CMD: Group 0, Index 1, Command "WEBSEND", Data "[0.0.0.0:0] /?json={"RfReceived":{"Data":"BDDBE8"}}" 18:49:07 RSL: stat/tasmota_C23DBA/RESULT = {"WebSend":"Connect failed"} 18:49:07 RUL: RFRECEIVED#RFKEY performs "WebSend [0.0.0.0:0] /?json={"RfReceived":{"RfKey":"1"}}" 18:49:07 SRC: Rule 18:49:07 CMD: Group 0, Index 1, Command "WEBSEND", Data "[0.0.0.0:0] /?json={"RfReceived":{"RfKey":"1"}}" 18:49:13 RSL: stat/tasmota_C23DBA/RESULT = {"WebSend":"Connect failed"}



### TO REPRODUCE
_Steps to reproduce the behavior:_

### EXPECTED BEHAVIOUR
_A clear and concise description of what you expected to happen._
"WebSend":"Done"

### SCREENSHOTS
_If applicable, add screenshots to help explain your problem._

### ADDITIONAL CONTEXT
_Add any other context about the problem here._
I'm trying to integrate my RM433 Rf Controller with the bridge, but every time I press a button the command comes back as "Connect Failed" when it should be "Done".

**(Please, remember to close the issue when the problem has been addressed)**

arendst / Tasmota

"WebSend":"Connect failed" #9341

PROBLEM DESCRIPTION

REQUESTED INFORMATION

Support Information