search

arjenhiemstra / ithowifi

Itho wifi add-on module (ESP32 wifi to itho I2C protocol)
GNU General Public License v3.0
170 stars 29 forks source link

[Request] AutoTemp fw 13 support #228

Closed BakkerA closed 4 months ago

BakkerA commented 5 months ago

Hi there. I think I'm on a quite new version of the autotemp firmware. Is it possible to get support for this one? The add-on is not showing messages right now due to a high fw number.

Current firmware version: 2.5.6 Hardware revision: NON-CVE 1

Also tried 2.7.0

Query devicetype: Result: 80 82 90 E0 01 07 00 01 00 0F 33 0D 00 36

jasperslits commented 5 months ago

Same here with different house now:

Itho device type: AutoTemp Itho hw version: 51 Itho fw version: 13 Manufacturer: 0

arjenhiemstra commented 5 months ago

Should be fixed in https://github.com/arjenhiemstra/ithowifi/releases/tag/Version-2.7.1

jasperslits commented 5 months ago

I have empty Itho status after installing 2.7.1 on autotemp

Query format: 80 82 A4 00 01 78 00 00 00 00 00 00 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 92 92 00 12 0C 0C 0C 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 10 10 10 10 10 10 10 10 10 92 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 F7

Query status Result: 80 82 A4 01 01 B8 03 02 00 00 00 00 08 48 08 34 00 00 00 07 8D 07 08 00 00 00 07 91 07 08 00 00 00 07 C8 07 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 64 64 64 64 64 00 00 00 00 00 00 00 64 64 64 64 64 64 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 1F 00 3F 00 00 03 84 01 B2 00 00 00 99 00 E9 00 0E 00 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 59

arjenhiemstra commented 5 months ago

stange, I cannot explain it. Just an emtpy page? No errors nothing? Are the settings also not available?

jasperslits commented 5 months ago

It seems to be OK now. I restarted the non-CVE multiple times. The settings page worked from the beginning and syslog did not show errors.

BakkerA commented 5 months ago

Should be fixed in https://github.com/arjenhiemstra/ithowifi/releases/tag/Version-2.7.1

Thanks Arjen! Seems to be working. Spider data is send to HA now.

arjenhiemstra commented 5 months ago

Great! Thanks for testing!