Describe the bug
After installing the CVE add-on I cannot seem to get the I2C connection to work.
On the ltho status page: Itho I2C connection status: init failed - please power cycle the Itho unit -
lhto settings page: Itho device type: Unkown device type
Firmware page:
Current system firmware:
Current firmware version: 2.8.0
Hardware revision: NON-CVE 1
^ The Hardware revision is a bit puzzling to me, is that because CVE2 and NON-CVE1 got merged?
Seems a lot like: https://github.com/arjenhiemstra/ithowifi/issues/111
Also tried different firmware: 2.9.0-BETA1, 2.8.0 and 2.7.0
Enabling/Disabling as suggested in the aforementioned issue doesn't seem to have any effect.
Resetting the humidity sensor from the i2c debug menu or restarting the unit as suggested also doesn't have any effect.
To Reproduce
Steps to reproduce the behaviour:
Install addon
Initialize the wifi
Go to the lhto settings
Itho I2C connection status: init failed
Expected behaviour
I2C connection established
Screenshots
I2C debug:
Add-on installed as described in the Dutch manual:
I2C commands:
Device information
Firmware version: 2.8.0
Hardware revision: CVE2 (with CC1101 RF module)
Type/model number Itho: CVE-S ECO SP 03-00400
With humidity sensor
CC1101 RF module enabled: Yes (disabling doesn't seem to make a difference)
This looks more te be faulty hardware than a bug. The CVE-S ECO should be supported without issues.
Please contact via mail with your order details so we can fix this.
Describe the bug After installing the CVE add-on I cannot seem to get the I2C connection to work. On the ltho status page:
Itho I2C connection status: init failed - please power cycle the Itho unit -
lhto settings page:Itho device type: Unkown device type
Firmware page:^ The Hardware revision is a bit puzzling to me, is that because CVE2 and NON-CVE1 got merged?
Seems a lot like: https://github.com/arjenhiemstra/ithowifi/issues/111 Also tried different firmware: 2.9.0-BETA1, 2.8.0 and 2.7.0 Enabling/Disabling as suggested in the aforementioned issue doesn't seem to have any effect. Resetting the humidity sensor from the i2c debug menu or restarting the unit as suggested also doesn't have any effect.
To Reproduce Steps to reproduce the behaviour:
Itho I2C connection status: init failed
Expected behaviour I2C connection established
Screenshots I2C debug:
Add-on installed as described in the Dutch manual:
![Screenshot_20240516_225057](https://github.com/arjenhiemstra/ithowifi/assets/7102817/1d2a900f-5955-4a56-b8d8-8ca36d4225ae)
I2C commands:![Screenshot_20240516_225952](https://github.com/arjenhiemstra/ithowifi/assets/7102817/5e87b8d3-63ec-464f-bb86-84bd6e8efde9)
Device information
03-00400
Debug logging logfile0.current.log
Desktop (please complete the following information):
Smartphone (please complete the following information):