Laser engraver was shut down during an upload of a vector jpeg, the image did not fully load. When unit was tried again, it can no longer connect to laser engraver.
Software was uninstalled and reinstalled, drivers were updated and still unable to connect. When trying to connect, the warning box pops up and says that it cannot connect, go to ? and follow steps. All steps were followed and no resolution.
When clicking on connect, engraver should connect.
To reproduce issue:
Go to connect
Box pops up and says "Error connecting to engraver. If you need help click on ? button.
MECPOW Laser engraver X5
Windows 10
GBRLv 7.11.0
Session log:
13/07/2024 18:29:27.675 Program ------- LaserGRBL v7.11.0 [64bit] START -------
13/07/2024 18:29:28.235 OpenGL AUTO->FBO OpenGL 4.6.0 - Build 30.0.100.9864, Intel, Intel(R) UHD Graphics 630
13/07/2024 18:29:31.729 Update DB Material DB is up to date
13/07/2024 18:29:39.255 SetStatus Machine status [Connecting]
13/07/2024 18:29:39.259 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial)
13/07/2024 18:29:39.265 SendImmediate Send Immediate Command [0x18]
13/07/2024 18:29:49.244 OpenCom Connection timeout!
13/07/2024 18:29:49.244 CloseCom Close COM3 [CORE]
13/07/2024 18:29:49.245 SetStatus Machine status [Disconnected]
13/07/2024 18:30:07.527 SetStatus Machine status [Connecting]
13/07/2024 18:30:07.528 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial)
13/07/2024 18:30:07.531 SendImmediate Send Immediate Command [0x18]
13/07/2024 18:30:08.560 CloseCom Close COM3 [USER]
13/07/2024 18:30:08.560 SetStatus Machine status [Disconnected]
13/07/2024 18:30:20.755 OpenFile Open C:\Users\Owner\OneDrive\Documents\laser images\2 horses and shoe.jpg
13/07/2024 18:30:36.740 SetStatus Machine status [Connecting]
13/07/2024 18:30:36.741 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial)
13/07/2024 18:30:36.744 SendImmediate Send Immediate Command [0x18]
13/07/2024 18:30:39.073 CloseCom Close COM3 [USER]
13/07/2024 18:30:39.073 SetStatus Machine status [Disconnected]
13/07/2024 18:30:39.116 Program ---------------- PROGRAM STOP -----------------
14/07/2024 06:49:53.259 Program ------- LaserGRBL v7.11.0 [64bit] START -------
14/07/2024 06:49:53.862 OpenGL AUTO->FBO OpenGL 4.6.0 - Build 30.0.100.9864, Intel, Intel(R) UHD Graphics 630
14/07/2024 06:50:04.008 SetStatus Machine status [Connecting]
14/07/2024 06:50:04.014 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial)
14/07/2024 06:50:04.025 SendImmediate Send Immediate Command [0x18]
14/07/2024 06:50:14.013 OpenCom Connection timeout!
14/07/2024 06:50:14.013 CloseCom Close COM3 [CORE]
14/07/2024 06:50:14.014 SetStatus Machine status [Disconnected]
14/07/2024 06:50:35.337 SetStatus Machine status [Connecting]
14/07/2024 06:50:35.338 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial)
14/07/2024 06:50:35.341 SendImmediate Send Immediate Command [0x18]
14/07/2024 06:50:49.972 OpenCom Connection timeout!
14/07/2024 06:50:49.972 CloseCom Close COM3 [CORE]
14/07/2024 06:50:49.973 SetStatus Machine status [Disconnected]
14/07/2024 06:51:38.451 Program ---------------- PROGRAM STOP -----------------
Laser engraver was shut down during an upload of a vector jpeg, the image did not fully load. When unit was tried again, it can no longer connect to laser engraver.
Software was uninstalled and reinstalled, drivers were updated and still unable to connect. When trying to connect, the warning box pops up and says that it cannot connect, go to ? and follow steps. All steps were followed and no resolution.
When clicking on connect, engraver should connect.
To reproduce issue:
MECPOW Laser engraver X5 Windows 10 GBRLv 7.11.0
Session log:
13/07/2024 18:29:27.675 Program ------- LaserGRBL v7.11.0 [64bit] START ------- 13/07/2024 18:29:28.235 OpenGL AUTO->FBO OpenGL 4.6.0 - Build 30.0.100.9864, Intel, Intel(R) UHD Graphics 630 13/07/2024 18:29:31.729 Update DB Material DB is up to date 13/07/2024 18:29:39.255 SetStatus Machine status [Connecting] 13/07/2024 18:29:39.259 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial) 13/07/2024 18:29:39.265 SendImmediate Send Immediate Command [0x18] 13/07/2024 18:29:49.244 OpenCom Connection timeout! 13/07/2024 18:29:49.244 CloseCom Close COM3 [CORE] 13/07/2024 18:29:49.245 SetStatus Machine status [Disconnected] 13/07/2024 18:30:07.527 SetStatus Machine status [Connecting] 13/07/2024 18:30:07.528 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial) 13/07/2024 18:30:07.531 SendImmediate Send Immediate Command [0x18] 13/07/2024 18:30:08.560 CloseCom Close COM3 [USER] 13/07/2024 18:30:08.560 SetStatus Machine status [Disconnected] 13/07/2024 18:30:20.755 OpenFile Open C:\Users\Owner\OneDrive\Documents\laser images\2 horses and shoe.jpg 13/07/2024 18:30:36.740 SetStatus Machine status [Connecting] 13/07/2024 18:30:36.741 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial) 13/07/2024 18:30:36.744 SendImmediate Send Immediate Command [0x18] 13/07/2024 18:30:39.073 CloseCom Close COM3 [USER] 13/07/2024 18:30:39.073 SetStatus Machine status [Disconnected] 13/07/2024 18:30:39.116 Program ---------------- PROGRAM STOP -----------------
14/07/2024 06:49:53.259 Program ------- LaserGRBL v7.11.0 [64bit] START ------- 14/07/2024 06:49:53.862 OpenGL AUTO->FBO OpenGL 4.6.0 - Build 30.0.100.9864, Intel, Intel(R) UHD Graphics 630 14/07/2024 06:50:04.008 SetStatus Machine status [Connecting] 14/07/2024 06:50:04.014 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial) 14/07/2024 06:50:04.025 SendImmediate Send Immediate Command [0x18] 14/07/2024 06:50:14.013 OpenCom Connection timeout! 14/07/2024 06:50:14.013 CloseCom Close COM3 [CORE] 14/07/2024 06:50:14.014 SetStatus Machine status [Disconnected] 14/07/2024 06:50:35.337 SetStatus Machine status [Connecting] 14/07/2024 06:50:35.338 OpenCom Open COM3 @ 115200 baud Ctrl-X (UsbSerial) 14/07/2024 06:50:35.341 SendImmediate Send Immediate Command [0x18] 14/07/2024 06:50:49.972 OpenCom Connection timeout! 14/07/2024 06:50:49.972 CloseCom Close COM3 [CORE] 14/07/2024 06:50:49.973 SetStatus Machine status [Disconnected] 14/07/2024 06:51:38.451 Program ---------------- PROGRAM STOP -----------------