Line to line Tracing mode not working correctly. the laser does not turn off in white spaces.

[SamarHanif]

Describe the bug the laser does not turn off in white spaces I checked the command the software is generating and there is no M4 command to turn off the laser in white spaces however the software works fine for vectorise image mode where only outline of the Shapes has to be drawn

Expected behavior YouTube it's like the laser never turns off so when jumping from one shape to another there is always a line made by the laser as there are no M5 turn off command generated in line to line mode the regular working should be the laser should turn off in white spaces as my hardware does not support dynamic laser. I also tried installing and updating the laser GRbL version to the most recent one but when I do that then vectorize mode / outline mode too, start causing the same issue.

Hardware and software configuration (please complete the following information):

• Windows version 10
• Engraver brand and model : neje 6000
• Grbl version :
• LaserGRBL version: 3.0.5

[StuartB4]

Usually you have to make sure Laser Mode is enabled in GRBL Configuration. Start LaserGRBL and click on Connect. Go to Menu, Grbl Configuration and make sure $32 is set to 1 and $30 is set to 1000 Then click the Write button to save it.