search

armbian / build

Armbian Linux build framework generates custom Debian or Ubuntu image for x86, aarch64, riscv64 & armhf
https://www.armbian.com
GNU General Public License v2.0
4.29k stars 2.36k forks source link

MVEBU-CURRENT: PCIe problems on mvebu-next and dev. Starting with LK4.19. #1711

Closed Heisath closed 4 years ago

Heisath commented 4 years ago

Hi,

I am opening this issue to discuss the problems still open regarding pcie support on mvebu-current and mvebu-dev.

The issues are still open from last big kernel move https://github.com/armbian/build/issues/1426 . And in my opinion they will keep us from moving towards dropping LK4.14 support on mvebu at some point. Apart from that it would be nice to have sfp and pcie both working on the clearfog at some point ;)

I have done some further testing with our mvebu-current build (which contains u-boot 2018.1 from solidrun, lk4.19, debian buster) vs. the upstream (solidrun provided) buster image (which also has their u-boot and lk4.19). Results differ in the details but in the end pcie is not really working. Check https://docs.google.com/spreadsheets/d/1VggzrfFibH0cmpSGW2FyoJW-d936Y2amwwKutUwX4-8 for some examples.

I will edit this and add some logs from both bootups. Maybe someone can identify what the issue is.

EDIT: Boot up of our build with lspci and dmesg in there:

Click to expand ``` U-Boot SPL 2018.01-armbian (Jan 02 2020 - 14:01:22) High speed PHY - Version: 2.0 Detected Device ID 6828 board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 3 | SATA0 | | 1 | 0 | SGMII1 | | 2 | 5 | PCIe1 | | 3 | 5 | USB3 HOST1 | | 4 | 5 | PCIe2 | | 5 | 0 | SGMII2 | -------------------------------- :** Link is Gen1, check the EP capability PCIe, Idx 1: Link upgraded to Gen2 based on client capabilities PCIe, Idx 2: detected no link High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.29.0 DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Trying to boot from MMC1 U-Boot 2018.01-armbian (Jan 02 2020 - 14:01:22 +0100) SoC: MV88F6828-B0 at 1600 MHz DRAM: 1 GiB (800 MHz, 32-bit, ECC not enabled) MMC: mv_sdh: 0 *** Warning - bad CRC, using default environment PCI: 00:01.0 - 1b21:0612 - Mass storage controller Cannot add window '4:d8', conflicts with another window PCIe unable to add mbus window for mem at f0000000+08000000 PCI: 01:00.0 - 11ab:6828 - Memory controller 01:01.0 - 168c:003c - Network controller Model: SolidRun Clearfog Board: SolidRun ClearFog Pro SCSI: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Net: Warning: ethernet@70000 (eth1) using random MAC address - d2:63:b4:ec:a3:69 eth1: ethernet@70000 Warning: ethernet@30000 (eth2) using incremented MAC address - d2:63:b4:ec:a3:6a , eth2: ethernet@30000 Warning: ethernet@34000 (eth3) using incremented MAC address - d2:63:b4:ec:a3:6b , eth3: ethernet@34000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2967 bytes read in 105 ms (27.3 KiB/s) ## Executing script at 03000000 Boot script loaded from mmc 275 bytes read in 84 ms (2.9 KiB/s) 25557 bytes read in 271 ms (91.8 KiB/s) 6740732 bytes read in 469 ms (13.7 MiB/s) 5684640 bytes read in 421 ms (12.9 MiB/s) ## Loading init Ramdisk from Legacy Image at 02880000 ... Image Name: uInitrd Created: 2020-01-02 13:49:42 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6740668 Bytes = 6.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 02040000 Booting using the fdt blob at 0x2040000 Loading Ramdisk to 0f992000, end 0ffffabc ... OK reserving fdt memory region: addr=2040000 size=6c000 Loading Device Tree to 0f923000, end 0f991fff ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Loading, please wait... Starting version 241 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1 /dev/mmcblk0p1: clean, 79929/1929536 files, 629596/7712800 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. Welcome to Debian GNU/Linux 10 (buster)! [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Reached target System Time Synchronized. [ OK ] Reached target Swap. [ OK ] Listening on Syslog Socket. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket. Starting Restore / save the current clock... Starting Create list of re…odes for the current kernel... Starting Set the console keyboard layout... [ OK ] Listening on Journal Audit Socket. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ OK ] Listening on udev Control Socket. Mounting POSIX Message Queue File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Listening on fsck to fsckd communication Socket. Starting Remount Root and Kernel File Systems... [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... Starting Load Kernel Modules... Mounting Kernel Debug File System... Starting Journal Service... Starting Nameserver information manager... [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Remote File Systems. [ OK ] Started Restore / save the current clock. [ OK ] Started Create list of req… nodes for the current kernel. [ OK ] Started Set the console keyboard layout. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Mounted Kernel Debug File System. Starting Apply Kernel Variables... Mounting FUSE Control File System... Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... Starting Create System Users... [ OK ] Started Nameserver information manager. [ OK ] Started Apply Kernel Variables. [ OK ] Started udev Coldplug all Devices. [ OK ] Mounted FUSE Control File System. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... Starting Helper to synchronize boot up for ifupdown... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Helper to synchronize boot up for ifupdown. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /tmp... [ OK ] Mounted /tmp. [ OK ] Reached target Local File Systems. Starting Set console font and keymap... Starting Create Volatile Files and Directories... Starting Armbian ZRAM config... Starting Raise network interfaces... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Set console font and keymap. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Entropy daemon using the HAVEGE algorithm. [ OK ] Found device /dev/ttyS0. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Raise network interfaces. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ OK ] Started Armbian ZRAM config. Starting Armbian memory supported logging... [ OK ] Started Armbian memory supported logging. [ OK ] Reached target System Initialization. [ OK ] Started Daily man-db regeneration. [ OK ] Started Daily Cleanup of Temporary Directories. Starting Armbian hardware optimization... [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. Starting Armbian hardware monitoring... [ OK ] Started Armbian hardware optimization. [ OK ] Started Armbian hardware monitoring. [ OK ] Reached target Basic System. Starting Resets System Activity Data Collector... [ OK ] Started Regular background program processing daemon. Starting rng-tools.service... Starting LSB: Load kernel …d to enable cpufreq scaling... [ OK ] Started D-Bus System Message Bus. Starting Dispatcher daemon for systemd-networkd... Starting System Logging Service... Starting WPA supplicant... Starting Network Manager... Starting Login Service... [ OK ] Started Resets System Activity Data Collector. [ OK ] Started rng-tools.service. [ OK ] Started Login Service. [ OK ] Started System Logging Service. [ OK ] Started WPA supplicant. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started LSB: set CPUFreq kernel parameters. Starting LSB: Set sysfs variables from /etc/sysfs.conf... [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf. [ OK ] Started Network Manager. [ OK ] Reached target Network. [ OK ] Started Unattended Upgrades Shutdown. Starting chrony, an NTP client/server... Starting OpenBSD Secure Shell server... Starting Permit User Sessions... [ OK ] Reached target Network is Online. Starting LSB: Advanced IEEE 802.11 management daemon... Starting /etc/rc.local Compatibility... [ OK ] Started LSB: Advanced IEEE 802.11 management daemon. [ OK ] Started Permit User Sessions. [ OK ] Started /etc/rc.local Compatibility. Starting Hostname Service... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started chrony, an NTP client/server. [ OK ] Started Dispatcher daemon for systemd-networkd. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. [ OK ] Started Hostname Service. Armbian 19.11.4 Buster ttyS0 clearfogpro login: root Password: Last login: Thu Jan 2 14:40:00 UTC 2020 on ttyS0 ____ _ __ ____ / ___| | ___ __ _ _ __ / _| ___ __ _ | _ \ _ __ ___ | | | |/ _ \/ _` | '__| |_ / _ \ / _` | | |_) | '__/ _ \ | |___| | __/ (_| | | | _| (_) | (_| | | __/| | | (_) | \____|_|\___|\__,_|_| |_| \___/ \__, | |_| |_| \___/ |___/ Welcome to Armbian buster with Linux 4.19.92-mvebu System load: 0.13 0.03 0.01 Up time: 0 min Memory usage: 8 % of 1001MB IP: CPU temp: 62°C Usage of /: 7% of 29G [ General system configuration (beta): armbian-config ] root@clearfogpro:~# lspci 00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 0a) 00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 0a) 02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter (rev ff) root@clearfogpro:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.92-mvebu (root@ubunt) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #19.11.5 SMP Thu Jan 2 14:19:02 CET 2020 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Clearfog A1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x3f000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] random: get_random_bytes called from start_kernel+0x87/0x360 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s30476 r8192 d22772 u61440 [ 0.000000] pcpu-alloc: s30476 r8192 d22772 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 root=UUID=2d77148f-7520-45d6-8691-836dda03a24d rootwait rootfstype=ext4 ubootdev=mmc scandelay loglevel=1 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 1048576 bytes of page_ext [ 0.000000] Memory: 1001900K/1048576K available (7168K kernel code, 371K rwdata, 1868K rodata, 1024K init, 366K bss, 30292K reserved, 16384K cma-reserved, 245760K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf800000 - 0xbfe00000 ( 6 MB) .text : 0x(ptrval) - 0x(ptrval) (8160 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 372 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 367 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000000] Switching to timer-based delay loop, resolution 40ns [ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns [ 0.000007] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000189] Console: colour dummy device 80x30 [ 0.000210] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.000215] pid_max: default: 32768 minimum: 301 [ 0.000355] Security Framework initialized [ 0.000359] AppArmor: AppArmor disabled by boot time parameter [ 0.000398] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000402] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000757] CPU: Testing write buffer coherency: ok [ 0.000767] CPU0: Spectre v2: using BPIALL workaround [ 0.000886] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001059] Setting up static identity map for 0x100000 - 0x100054 [ 0.001131] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0xA [ 0.001204] mvebu-pmsu: Initializing Power Management Service Unit [ 0.001255] rcu: Hierarchical SRCU implementation. [ 0.001462] smp: Bringing up secondary CPUs ... [ 0.001592] Booting CPU 1 [ 0.001733] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.001735] CPU1: Spectre v2: using BPIALL workaround [ 0.001784] smp: Brought up 1 node, 2 CPUs [ 0.001787] SMP: Total of 2 processors activated (100.00 BogoMIPS). [ 0.001789] CPU: All CPU(s) started in SVC mode. [ 0.002285] devtmpfs: initialized [ 0.004295] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.004368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.004373] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.004853] xor: measuring software checksum speed [ 0.043893] arm4regs : 2534.000 MB/sec [ 0.083891] 8regs : 1950.000 MB/sec [ 0.123891] 32regs : 1983.000 MB/sec [ 0.163891] neon : 1843.000 MB/sec [ 0.163893] xor: using function: arm4regs (2534.000 MB/sec) [ 0.163912] pinctrl core: initialized pinctrl subsystem [ 0.164249] NET: Registered protocol family 16 [ 0.168027] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.168298] audit: initializing netlink subsys (disabled) [ 0.168383] audit: type=2000 audit(0.168:1): state=initialized audit_enabled=0 res=1 [ 0.168593] cpuidle: using governor ladder [ 0.168709] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.168711] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.168817] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.168822] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.240007] raid6: int32x1 gen() 208 MB/s [ 0.308000] raid6: int32x1 xor() 269 MB/s [ 0.375957] raid6: int32x2 gen() 350 MB/s [ 0.443955] raid6: int32x2 xor() 311 MB/s [ 0.511996] raid6: int32x4 gen() 424 MB/s [ 0.579957] raid6: int32x4 xor() 337 MB/s [ 0.647908] raid6: int32x8 gen() 471 MB/s [ 0.715893] raid6: int32x8 xor() 325 MB/s [ 0.783898] raid6: neonx1 gen() 1212 MB/s [ 0.851902] raid6: neonx1 xor() 1151 MB/s [ 0.919912] raid6: neonx2 gen() 1296 MB/s [ 0.987902] raid6: neonx2 xor() 1362 MB/s [ 1.055909] raid6: neonx4 gen() 1377 MB/s [ 1.123903] raid6: neonx4 xor() 1251 MB/s [ 1.191947] raid6: neonx8 gen() 1105 MB/s [ 1.259906] raid6: neonx8 xor() 1062 MB/s [ 1.259909] raid6: using algorithm neonx4 gen() 1377 MB/s [ 1.259910] raid6: .... xor() 1251 MB/s, rmw enabled [ 1.259912] raid6: using neon recovery algorithm [ 1.260024] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulator-3p3v[0]' [ 1.260180] vgaarb: loaded [ 1.260325] SCSI subsystem initialized [ 1.260384] libata version 3.00 loaded. [ 1.260454] usbcore: registered new interface driver usbfs [ 1.260473] usbcore: registered new interface driver hub [ 1.260494] usbcore: registered new device driver usb [ 1.260908] clocksource: Switched to clocksource armada_370_xp_clocksource [ 1.260982] VFS: Disk quotas dquot_6.6.0 [ 1.261008] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.261068] FS-Cache: Loaded [ 1.263619] NET: Registered protocol family 2 [ 1.263892] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 1.263910] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.263947] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.264009] TCP: Hash tables configured (established 8192 bind 8192) [ 1.264056] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.264080] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.264172] NET: Registered protocol family 1 [ 1.264360] RPC: Registered named UNIX socket transport module. [ 1.264362] RPC: Registered udp transport module. [ 1.264364] RPC: Registered tcp transport module. [ 1.264366] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.264370] PCI: CLS 0 bytes, default 64 [ 1.264456] Unpacking initramfs... [ 1.448290] Freeing initrd memory: 6584K [ 1.448582] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.449180] Initialise system trusted keyrings [ 1.449284] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 1.451550] zbud: loaded [ 1.452272] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.452489] FS-Cache: Netfs 'nfs' registered for caching [ 1.452696] NFS: Registering the id_resolver key type [ 1.452705] Key type id_resolver registered [ 1.452707] Key type id_legacy registered [ 1.452713] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.452792] fuse init (API version 7.27) [ 1.453106] aufs 4.19-20181029 [ 1.455219] Key type asymmetric registered [ 1.455222] Asymmetric key parser 'x509' registered [ 1.455247] bounce: pool size: 64 pages [ 1.455269] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.455325] io scheduler noop registered [ 1.455327] io scheduler deadline registered [ 1.455408] io scheduler cfq registered (default) [ 1.455411] io scheduler mq-deadline registered [ 1.455413] io scheduler kyber registered [ 1.455512] io scheduler bfq registered [ 1.456268] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 1.456736] gpio gpiochip0: (f1018100.gpio): added GPIO chardev (254:0) [ 1.456765] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (f1018100.gpio) [ 1.457023] gpio gpiochip1: (f1018140.gpio): added GPIO chardev (254:1) [ 1.457051] gpiochip_setup_dev: registered GPIOs 32 to 59 on device: gpiochip1 (f1018140.gpio) [ 1.457621] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.485331] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 1.485430] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.513327] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 1.513580] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.514207] console [ttyS0] disabled [ 1.534266] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 15625000) is a 16550A [ 1.534292] console [ttyS0] enabled [ 1.554641] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 23, base_baud = 15625000) is a 16550A [ 1.557260] loop: module loaded [ 1.557853] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 1.557860] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.558393] scsi host0: ahci-mvebu [ 1.558601] scsi host1: ahci-mvebu [ 1.558672] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44 [ 1.558675] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44 [ 1.558796] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 1.558802] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.559297] scsi host2: ahci-mvebu [ 1.559443] scsi host3: ahci-mvebu [ 1.559515] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 45 [ 1.559518] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 45 [ 1.560240] mdio_bus fixed-0: GPIO lookup for consumer reset [ 1.560243] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 1.560246] mdio_bus fixed-0: No GPIO consumer reset found [ 1.560255] libphy: Fixed MDIO Bus: probed [ 1.560496] mdio_bus f1072004.mdio-mii: GPIO lookup for consumer reset [ 1.560499] mdio_bus f1072004.mdio-mii: using device tree for GPIO lookup [ 1.560508] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/internal-regs/mdio@72004[0]' [ 1.560514] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/internal-regs/mdio@72004[0]' [ 1.560518] mdio_bus f1072004.mdio-mii: using lookup tables for GPIO lookup [ 1.560520] mdio_bus f1072004.mdio-mii: No GPIO consumer reset found [ 1.560522] libphy: orion_mdio_bus: probed [ 1.566820] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/internal-regs/mdio@72004/ethernet-phy@0[0]' [ 1.567267] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled [ 1.568774] mvneta f1070000.ethernet eth0: Using device tree mac address 0a:01:cb:50:3c:86 [ 1.568842] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/soc/internal-regs/ethernet@30000/fixed-link[0]' [ 1.569829] mvneta f1030000.ethernet eth1: Using device tree mac address 00:50:43:84:25:2f [ 1.570821] mvneta f1034000.ethernet eth2: Using device tree mac address 00:50:43:0d:19:18 [ 1.570987] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.570990] ehci-pci: EHCI PCI platform driver [ 1.571017] ehci-orion: EHCI orion driver [ 1.571092] orion-ehci f1058000.usb: EHCI Host Controller [ 1.571103] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 1.571210] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000 [ 1.584917] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 1.585027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.585031] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.585034] usb usb1: Product: EHCI Host Controller [ 1.585037] usb usb1: Manufacturer: Linux 4.19.92-mvebu ehci_hcd [ 1.585040] usb usb1: SerialNumber: f1058000.usb [ 1.585262] hub 1-0:1.0: USB hub found [ 1.585278] hub 1-0:1.0: 1 port detected [ 1.585655] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 1.585664] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 [ 1.585849] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 1.585870] xhci-hcd f10f0000.usb3: irq 47, io mem 0xf10f0000 [ 1.586012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.586016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.586019] usb usb2: Product: xHCI Host Controller [ 1.586022] usb usb2: Manufacturer: Linux 4.19.92-mvebu xhci-hcd [ 1.586024] usb usb2: SerialNumber: f10f0000.usb3 [ 1.586219] hub 2-0:1.0: USB hub found [ 1.586235] hub 2-0:1.0: 1 port detected [ 1.586367] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 1.586375] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 [ 1.586389] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed [ 1.586423] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.586478] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.586481] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.586485] usb usb3: Product: xHCI Host Controller [ 1.586487] usb usb3: Manufacturer: Linux 4.19.92-mvebu xhci-hcd [ 1.586490] usb usb3: SerialNumber: f10f0000.usb3 [ 1.586655] hub 3-0:1.0: USB hub found [ 1.586670] hub 3-0:1.0: 1 port detected [ 1.586853] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 1.586862] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 [ 1.587036] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 1.587054] xhci-hcd f10f8000.usb3: irq 48, io mem 0xf10f8000 [ 1.587200] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.587204] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587207] usb usb4: Product: xHCI Host Controller [ 1.587210] usb usb4: Manufacturer: Linux 4.19.92-mvebu xhci-hcd [ 1.587212] usb usb4: SerialNumber: f10f8000.usb3 [ 1.587384] hub 4-0:1.0: USB hub found [ 1.587400] hub 4-0:1.0: 1 port detected [ 1.587524] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 1.587531] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 1.587540] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed [ 1.587575] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.587639] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.587642] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587645] usb usb5: Product: xHCI Host Controller [ 1.587648] usb usb5: Manufacturer: Linux 4.19.92-mvebu xhci-hcd [ 1.587651] usb usb5: SerialNumber: f10f8000.usb3 [ 1.587819] hub 5-0:1.0: USB hub found [ 1.587834] hub 5-0:1.0: 1 port detected [ 1.588054] usbcore: registered new interface driver usb-storage [ 1.588154] mousedev: PS/2 mouse device common for all mice [ 1.588625] armada38x-rtc f10a3800.rtc: registered as rtc0 [ 1.588726] i2c /dev entries driver [ 1.588997] pca953x 0-0020: GPIO lookup for consumer reset [ 1.589000] pca953x 0-0020: using device tree for GPIO lookup [ 1.589009] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/internal-regs/i2c@11000/gpio-expander@20[0]' [ 1.589016] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/internal-regs/i2c@11000/gpio-expander@20[0]' [ 1.589019] pca953x 0-0020: using lookup tables for GPIO lookup [ 1.589022] pca953x 0-0020: No GPIO consumer reset found [ 1.589030] pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator [ 1.589056] pca953x 0-0020: Linked as a consumer to regulator.0 [ 1.589438] gpiochip_find_base: found new base at 496 [ 1.589638] GPIO line 496 (pcie1.0-clkreq) hogged as input [ 1.589913] GPIO line 499 (pcie1.0-w-disable) hogged as output/low [ 1.590106] GPIO line 501 (usb3-current-limit) hogged as input [ 1.590381] GPIO line 502 (usb3-power) hogged as output/high [ 1.590655] GPIO line 507 (m.2 devslp) hogged as output/low [ 1.590848] GPIO line 500 (pcie2.0-clkreq) hogged as input [ 1.591121] GPIO line 503 (pcie2.0-w-disable) hogged as output/low [ 1.591173] gpio gpiochip2: (pca9555): added GPIO chardev (254:2) [ 1.591200] gpiochip_setup_dev: registered GPIOs 496 to 511 on device: gpiochip2 (pca9555) [ 1.592982] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.593141] sdhci: Secure Digital Host Controller Interface driver [ 1.593142] sdhci: Copyright(c) Pierre Ossman [ 1.593297] sdhci-pxav3 f10d8000.sdhci: GPIO lookup for consumer cd [ 1.593300] sdhci-pxav3 f10d8000.sdhci: using device tree for GPIO lookup [ 1.593313] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/internal-regs/sdhci@d8000[0]' - status (0) [ 1.593323] gpio-20 (cd): gpiod_set_debounce: missing set() or set_config() operations [ 1.593325] sdhci-pxav3 f10d8000.sdhci: Got CD GPIO [ 1.593329] sdhci-pxav3 f10d8000.sdhci: GPIO lookup for consumer wp [ 1.593332] sdhci-pxav3 f10d8000.sdhci: using device tree for GPIO lookup [ 1.593338] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/internal-regs/sdhci@d8000[0]' [ 1.593344] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/internal-regs/sdhci@d8000[0]' [ 1.593347] sdhci-pxav3 f10d8000.sdhci: using lookup tables for GPIO lookup [ 1.593350] sdhci-pxav3 f10d8000.sdhci: No GPIO consumer wp found [ 1.593397] sdhci-pxav3 f10d8000.sdhci: Linked as a consumer to regulator.1 [ 1.624980] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA [ 1.625078] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.625207] ledtrig-cpu: registered to indicate activity on CPUs [ 1.625230] hidraw: raw HID events driver (C) Jiri Kosina [ 1.625279] usbcore: registered new interface driver usbhid [ 1.625281] usbhid: USB HID core driver [ 1.625455] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 1.625663] Initializing XFRM netlink socket [ 1.625936] NET: Registered protocol family 10 [ 1.645762] Segment Routing with IPv6 [ 1.645808] NET: Registered protocol family 17 [ 1.645822] NET: Registered protocol family 15 [ 1.645845] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.645867] 8021q: 802.1Q VLAN Support v1.8 [ 1.645886] Key type dns_resolver registered [ 1.645999] ThumbEE CPU extension supported. [ 1.646004] Registering SWP/SWPB emulation handler [ 1.646237] registered taskstats version 1 [ 1.646239] Loading compiled-in X.509 certificates [ 1.646269] zswap: loaded using pool lzo/zbud [ 1.646949] Btrfs loaded, crc32c=crc32c-generic [ 1.656574] Key type encrypted registered [ 1.657440] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/pcie/pcie@2,0[0]' - status (0) [ 1.657447] mvebu-pcie soc:pcie: /soc/pcie/pcie@2,0: reset gpio is active low [ 1.657754] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/pcie/pcie@3,0[0]' - status (0) [ 1.657758] mvebu-pcie soc:pcie: /soc/pcie/pcie@3,0: reset gpio is active low [ 1.658233] pcie1.0: reset completed in 0us [ 1.658427] pcie2.0: reset completed in 0us [ 1.658491] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00 [ 1.658496] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.658500] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 1.658503] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 1.658506] pci_bus 0000:00: scanning bus [ 1.658618] pci 0000:00:02.0: [11ab:6828] type 01 class 0x060400 [ 1.658766] pci 0000:00:03.0: [11ab:6828] type 01 class 0x060400 [ 1.659654] pci_bus 0000:00: fixups for bus [ 1.659660] PCI: bus0: Fast back to back transfers disabled [ 1.659664] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 0 [ 1.659667] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.659673] pci 0000:00:03.0: scanning [bus 00-00] behind bridge, pass 0 [ 1.659676] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.659680] pci 0000:00:02.0: scanning [bus 00-00] behind bridge, pass 1 [ 1.659719] pci_bus 0000:01: scanning bus [ 1.708887] pci_bus 0000:01: fixups for bus [ 1.708890] PCI: bus1: Fast back to back transfers enabled [ 1.708893] pci_bus 0000:01: bus scan returning with max=01 [ 1.708897] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.708919] pci 0000:00:03.0: scanning [bus 00-00] behind bridge, pass 1 [ 1.708982] pci_bus 0000:02: scanning bus [ 1.709010] pci 0000:02:00.0: [168c:003c] type 00 class 0x028000 [ 1.709019] mmc0: new high speed SDHC card at address aaaa [ 1.709036] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 1.709061] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.709127] pci 0000:02:00.0: supports D1 D2 [ 1.709230] pci 0000:00:03.0: ASPM: current common clock configuration is broken, reconfiguring [ 1.710332] mmcblk0: mmc0:aaaa SL32G 29.7 GiB [ 1.715110] mmcblk0: p1 [ 1.745823] pci_bus 0000:02: fixups for bus [ 1.745829] PCI: bus2: Fast back to back transfers enabled [ 1.745832] pci_bus 0000:02: bus scan returning with max=02 [ 1.745837] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.745842] pci_bus 0000:00: bus scan returning with max=02 [ 1.745865] pci 0000:00:03.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff] [ 1.745870] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.745879] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit] [ 1.745884] pci 0000:02:00.0: BAR 0: error updating (0xe0000004 != 0xffffffff) [ 1.745888] pci 0000:02:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff) [ 1.745893] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0200000-0xe020ffff pref] [ 1.745896] pci 0000:00:03.0: PCI bridge to [bus 02] [ 1.745900] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe02fffff] [ 1.745947] pcieport 0000:00:02.0: assign IRQ: got 0 [ 1.745957] pcieport 0000:00:02.0: enabling bus mastering [ 1.746013] pcieport 0000:00:03.0: assign IRQ: got 0 [ 1.746018] pcieport 0000:00:03.0: enabling device (0140 -> 0142) [ 1.746030] pcieport 0000:00:03.0: enabling bus mastering [ 1.746243] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button_0[0]' - status (0) [ 1.746254] gpio-34 (Rear Button): gpiod_set_debounce: missing set() or set_config() operations [ 1.746370] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.871028] ata2: SATA link down (SStatus 0 SControl 300) [ 1.875020] ata3: SATA link down (SStatus 0 SControl 300) [ 1.875035] ata4: SATA link down (SStatus 0 SControl 300) [ 1.944912] usb 4-1: new high-speed USB device number 2 using xhci-hcd [ 2.032911] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.035488] ata1.00: ATA-9: LITEON LST-32S9G-11 SATA 32GB, ZS2110B, max UDMA/133 [ 2.035491] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 32) [ 2.035926] ata1.00: configured for UDMA/133 [ 2.036223] scsi 0:0:0:0: Direct-Access ATA LITEON LST-32S9G 10B PQ: 0 ANSI: 5 [ 2.036559] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.036572] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 2.036616] sd 0:0:0:0: [sda] Write Protect is off [ 2.036620] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.036657] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.037322] sda: sda1 sda2 sda3 < sda5 > [ 2.037909] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.038320] Freeing unused kernel memory: 1024K [ 2.057007] Run /init as init process [ 2.099894] usb 4-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.03 [ 2.099900] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.099903] usb 4-1: Product: Mass Storage [ 2.099906] usb 4-1: Manufacturer: Generic [ 2.099908] usb 4-1: SerialNumber: 3C17A0F8 [ 2.100673] usb-storage 4-1:1.0: USB Mass Storage device detected [ 2.102723] scsi host4: usb-storage 4-1:1.0 [ 2.105154] usbcore: registered new interface driver uas [ 2.209696] mdio_bus i2c:sfp: GPIO lookup for consumer reset [ 2.209701] mdio_bus i2c:sfp: using lookup tables for GPIO lookup [ 2.209705] mdio_bus i2c:sfp: No GPIO consumer reset found [ 2.209707] libphy: SFP I2C Bus: probed [ 2.209710] sfp sfp: GPIO lookup for consumer mod-def0 [ 2.209713] sfp sfp: using device tree for GPIO lookup [ 2.209722] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp[0]' [ 2.209734] of_get_named_gpiod_flags: parsed 'mod-def0-gpio' property of node '/sfp[0]' - status (0) [ 2.211635] sfp sfp: GPIO lookup for consumer los [ 2.211638] sfp sfp: using device tree for GPIO lookup [ 2.211647] of_get_named_gpiod_flags: can't parse 'los-gpios' property of node '/sfp[0]' [ 2.211659] of_get_named_gpiod_flags: parsed 'los-gpio' property of node '/sfp[0]' - status (0) [ 2.212664] sfp sfp: GPIO lookup for consumer tx-fault [ 2.212667] sfp sfp: using device tree for GPIO lookup [ 2.212676] of_get_named_gpiod_flags: can't parse 'tx-fault-gpios' property of node '/sfp[0]' [ 2.212687] of_get_named_gpiod_flags: parsed 'tx-fault-gpio' property of node '/sfp[0]' - status (0) [ 2.213349] sfp sfp: GPIO lookup for consumer tx-disable [ 2.213353] sfp sfp: using device tree for GPIO lookup [ 2.213362] of_get_named_gpiod_flags: can't parse 'tx-disable-gpios' property of node '/sfp[0]' [ 2.213372] of_get_named_gpiod_flags: parsed 'tx-disable-gpio' property of node '/sfp[0]' - status (0) [ 2.213497] no flags found for tx-disable [ 2.213502] sfp sfp: GPIO lookup for consumer rate-select0 [ 2.213504] sfp sfp: using device tree for GPIO lookup [ 2.213512] of_get_named_gpiod_flags: can't parse 'rate-select0-gpios' property of node '/sfp[0]' [ 2.213518] of_get_named_gpiod_flags: can't parse 'rate-select0-gpio' property of node '/sfp[0]' [ 2.213522] sfp sfp: using lookup tables for GPIO lookup [ 2.213525] sfp sfp: No GPIO consumer rate-select0 found [ 2.213530] sfp sfp: Host maximum power 2.0W [ 2.213540] random: fast init done [ 2.242333] mv88e6085 f1072004.mdio-mii:04: GPIO lookup for consumer reset [ 2.242339] mv88e6085 f1072004.mdio-mii:04: using device tree for GPIO lookup [ 2.242350] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/internal-regs/mdio@72004/switch@4[0]' [ 2.242356] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/soc/internal-regs/mdio@72004/switch@4[0]' [ 2.242360] mv88e6085 f1072004.mdio-mii:04: using lookup tables for GPIO lookup [ 2.242363] mv88e6085 f1072004.mdio-mii:04: No GPIO consumer reset found [ 2.242636] mv88e6085 f1072004.mdio-mii:04: switch 0x1760 detected: Marvell 88E6176, revision 1 [ 2.276760] mdio_bus mv88e6xxx-0: GPIO lookup for consumer reset [ 2.276765] mdio_bus mv88e6xxx-0: using lookup tables for GPIO lookup [ 2.276768] mdio_bus mv88e6xxx-0: No GPIO consumer reset found [ 2.500550] libphy: mv88e6xxx SMI: probed [ 2.535996] sfp sfp: module OEM SFP-T rev B sn A6C180710075 dc 180721 [ 2.536002] sfp sfp: Unknown/unsupported extended compliance code: 0x01 [ 3.134611] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 3.135681] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3.136442] sd 4:0:0:0: [sdb] 4014080 512-byte logical blocks: (2.06 GB/1.91 GiB) [ 3.138449] sd 4:0:0:0: [sdb] Write Protect is off [ 3.138454] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 3.139112] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.142455] sdb: sdb1 [ 3.146741] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 3.247320] mv88e6085 f1072004.mdio-mii:04 lan5 (uninitialized): PHY [mv88e6xxx-0:00] driver [Marvell 88E1540] [ 3.331538] mv88e6085 f1072004.mdio-mii:04 lan4 (uninitialized): PHY [mv88e6xxx-0:01] driver [Marvell 88E1540] [ 3.413049] mv88e6085 f1072004.mdio-mii:04 lan3 (uninitialized): PHY [mv88e6xxx-0:02] driver [Marvell 88E1540] [ 3.497044] mv88e6085 f1072004.mdio-mii:04 lan2 (uninitialized): PHY [mv88e6xxx-0:03] driver [Marvell 88E1540] [ 3.577038] mv88e6085 f1072004.mdio-mii:04 lan1 (uninitialized): PHY [mv88e6xxx-0:04] driver [Marvell 88E1540] [ 3.581400] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/soc/internal-regs/mdio@72004/switch@4/ports/port@5/fixed-link[0]' [ 3.586512] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/internal-regs/mdio@72004/switch@4/ports/port@5[0]' [ 3.588781] of_get_named_gpiod_flags: can't parse 'link-gpios' property of node '/soc/internal-regs/mdio@72004/switch@4/ports/port@6/fixed-link[0]' [ 3.589090] DSA: tree 0 setup [ 4.004070] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 4.576691] systemd[1]: System time before build time, advancing clock. [ 4.618731] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.618929] systemd[1]: Detected architecture arm. [ 4.640471] systemd[1]: Set hostname to . [ 4.641443] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 4.885469] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 4.885477] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.064709] random: systemd: uninitialized urandom read (16 bytes read) [ 5.070255] random: systemd: uninitialized urandom read (16 bytes read) [ 5.070392] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.088973] random: systemd: uninitialized urandom read (16 bytes read) [ 5.090254] systemd[1]: Created slice User and Session Slice. [ 5.108990] systemd[1]: Reached target Slices. [ 5.128967] systemd[1]: Reached target System Time Synchronized. [ 5.488212] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 5.953631] systemd-journald[243]: Received request to flush runtime journal from PID 1 [ 6.337018] orion_wdt: Initial timeout 171 sec [ 6.569050] marvell-cesa f1090000.crypto: CESA device successfully registered [ 6.743286] zram: Added device: zram0 [ 6.753034] zram: Added device: zram1 [ 6.756538] zram: Added device: zram2 [ 6.928292] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.930569] zram1: detected capacity change from 0 to 525258752 [ 7.039169] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.047478] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 7.047484] platform regulatory.0: Falling back to syfs fallback for: regulatory.db [ 7.101314] cfg80211: failed to load regulatory.db [ 7.146156] ath10k_pci 0000:02:00.0: of_irq_parse_pci: failed with rc=134 [ 7.146162] ath10k_pci 0000:02:00.0: assign IRQ: got 0 [ 7.168961] pci 0000:00:03.0: enabling bus mastering [ 7.188943] ath10k_pci 0000:02:00.0: Refused to change power state, currently in D3 [ 7.219183] ath10k_pci 0000:02:00.0: failed to wake up device : -110 [ 7.219205] ath10k_pci 0000:02:00.0: disabling bus mastering [ 7.255565] ath10k_pci: probe of 0000:02:00.0 failed with error -110 [ 7.988214] Adding 512944k swap on /dev/zram1. Priority:5 extents:1 across:512944k SSFS [ 8.076453] zram0: detected capacity change from 0 to 52428800 [ 8.525846] random: crng init done [ 8.525854] random: 7 urandom warning(s) missed due to ratelimiting [ 8.695696] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ 13.260930] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.333413] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] [ 13.333626] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode [ 13.333755] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.356629] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.357743] mvneta f1030000.ethernet eth1: configuring for fixed/sgmii link mode [ 13.357888] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.357924] mvneta f1030000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off [ 13.357930] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 13.375217] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 13.376462] mvneta f1034000.ethernet eth2: configuring for inband/sgmii link mode [ 13.585774] mvneta f1034000.ethernet eth2: PHY [i2c:sfp:16] driver [Marvell 88E1111] [ 13.585910] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 13.595689] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready [ 13.596266] mv88e6085 f1072004.mdio-mii:04 lan1: configuring for phy/gmii link mode [ 13.596329] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready [ 13.608326] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready [ 13.610730] mv88e6085 f1072004.mdio-mii:04 lan2: configuring for phy/gmii link mode [ 13.610797] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready [ 13.622452] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready [ 13.628245] mv88e6085 f1072004.mdio-mii:04 lan3: configuring for phy/gmii link mode [ 13.628310] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready [ 13.643738] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready [ 13.646194] mv88e6085 f1072004.mdio-mii:04 lan4: configuring for phy/gmii link mode [ 13.646263] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready [ 13.662900] IPv6: ADDRCONF(NETDEV_UP): lan5: link is not ready [ 13.663541] mv88e6085 f1072004.mdio-mii:04 lan5: configuring for phy/gmii link mode [ 13.663602] IPv6: ADDRCONF(NETDEV_UP): lan5: link is not ready [ 13.677741] IPv6: ADDRCONF(NETDEV_UP): lan6: link is not ready [ 13.683168] mv88e6085 f1072004.mdio-mii:04 lan6: configuring for fixed/ link mode [ 13.686049] IPv6: ADDRCONF(NETDEV_UP): lan6: link is not ready [ 13.689142] mv88e6085 f1072004.mdio-mii:04 lan6: Link is Up - 1Gbps/Full - flow control off [ 13.689163] IPv6: ADDRCONF(NETDEV_CHANGE): lan6: link becomes ready root@clearfogpro:~# ```

Boot up of solidrun (upstream) debian buster boot also including lspci and dmesg

Click to expand ``` U-Boot SPL 2018.01-02337-gdc4398fdb8 (May 14 2018 - 18:59:03) High speed PHY - Version: 2.0 Detected Device ID 6828 board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 3 | SATA0 | | 1 | 0 | SGMII1 | | 2 | 5 | PCIe1 | | 3 | 5 | USB3 HOST1 | | 4 | 5 | PCIe2 | | 5 | 0 | SGMII2 | -------------------------------- :** Link is Gen1, check the EP capability PCIe, Idx 1: Link upgraded to Gen2 based on client capabilities PCIe, Idx 2: detected no link High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.29.0 DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Trying to boot from SATA AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Found 1 device(s). U-Boot 2018.01-02337-gdc4398fdb8 (May 14 2018 - 18:59:03 +0200), Build: jenkins-u-boot-clearfog-model=pro,variant=sata-10 SoC: MV88F6828-?? (a) at 1600 MHz DRAM: 1 GiB (800 MHz, 32-bit, ECC not enabled) MMC: mv_sdh: 0 AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Found 1 device(s). *** Warning - bad CRC, using default environment Model: SolidRun Clearfog Board: SolidRun ClearFog Pro SCSI: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Net: Warning: ethernet@70000 (eth1) using random MAC address - d2:63:b4:12:18:cf eth1: ethernet@70000 Warning: ethernet@30000 (eth2) using incremented MAC address - d2:63:b4:12:18:d0 , eth2: ethernet@30000 Warning: ethernet@34000 (eth3) using incremented MAC address - d2:63:b4:12:18:d1 , eth3: ethernet@34000 Hit any key to stop autoboot: 0 scanning bus for devices... Device 0: (0:0) Vendor: ATA Prod.: LITEON LST-32S9G Rev: ZS21 Type: Hard Disk Capacity: 30533.8 MB = 29.8 GB (62533296 x 512) Found 1 device(s). Device 0: (0:0) Vendor: ATA Prod.: LITEON LST-32S9G Rev: ZS21 Type: Hard Disk Capacity: 30533.8 MB = 29.8 GB (62533296 x 512) ... is now current device Scanning scsi 0:1... Found U-Boot script /boot.scr 2904 bytes read in 39 ms (72.3 KiB/s) ## Executing script at 00200000 4252160 bytes read in 125 ms (32.4 MiB/s) 19577 bytes read in 34 ms (561.5 KiB/s) 20511591 bytes read in 488 ms (40.1 MiB/s) Booting Debian 4.19.0-6-armmp from scsi 0:1... ## Flattened Device Tree blob at 00100000 Booting using the fdt blob at 0x100000 Loading Ramdisk to 0ec70000, end 0ffffb67 ... OK Loading Device Tree to 0ec68000, end 0ec6fc78 ... OK Starting kernel ... [ 4.053975] pci 0000:02:00.0: BAR 0: error updating (0xe0200004 != 0xffffffff) [ 4.061241] pci 0000:02:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff) /dev/sda2: clean, 33740/1879632 files, 379496/7503872 blocks [ 7.115008] ath10k_pci 0000:02:00.0: of_irq_parse_pci: failed with rc=134 Debian GNU/Linux 10 debian ttyS0 debian login: root Password: Linux debian 4.19.0-6-armmp #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# lspci 00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 0a) 00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev 0a) 01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter (rev ff) root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.0-6-armmp (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: SolidRun Clearfog A1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x3f000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] random: get_random_bytes called from start_kernel+0xa0/0x504 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39756 r8192 d21684 u69632 [ 0.000000] pcpu-alloc: s39756 r8192 d21684 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260416 [ 0.000000] Kernel command line: console=ttyS0,115200 quiet [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 985136K/1048576K available (9216K kernel code, 1113K rwdata, 2588K rodata, 2048K init, 310K bss, 47056K reserved, 16384K cma-reserved, 245760K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (10208 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) (1113 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 311 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 32724 entries in 96 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 [ 0.000006] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns [ 0.000013] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns [ 0.000026] Switching to timer-based delay loop, resolution 1ns [ 0.000418] Ignoring duplicate/late registration of read_current_timer delay [ 0.000423] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.001002] Console: colour dummy device 80x30 [ 0.001025] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=3200000) [ 0.001032] pid_max: default: 32768 minimum: 301 [ 0.001160] Security Framework initialized [ 0.001163] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.001210] AppArmor: AppArmor initialized [ 0.001253] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001258] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001675] CPU: Testing write buffer coherency: ok [ 0.001688] CPU0: Spectre v2: using BPIALL workaround [ 0.001820] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002042] Setting up static identity map for 0x300000 - 0x3000a0 [ 0.002171] mvebu-soc-id: MVEBU SoC ID=0x6828, Rev=0xA [ 0.002252] mvebu-pmsu: Initializing Power Management Service Unit [ 0.002325] rcu: Hierarchical SRCU implementation. [ 0.003660] EFI services will not be available. [ 0.003794] smp: Bringing up secondary CPUs ... [ 0.003985] Booting CPU 1 [ 0.004158] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004161] CPU1: Spectre v2: using BPIALL workaround [ 0.004227] smp: Brought up 1 node, 2 CPUs [ 0.004230] SMP: Total of 2 processors activated (3200.00 BogoMIPS). [ 0.004233] CPU: All CPU(s) started in SVC mode. [ 0.004736] devtmpfs: initialized [ 0.006780] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.006899] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.006905] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.007415] pinctrl core: initialized pinctrl subsystem [ 0.007877] DMI not present or invalid. [ 0.008034] NET: Registered protocol family 16 [ 0.009297] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.009630] audit: initializing netlink subsys (disabled) [ 0.009720] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 [ 0.010230] No ATAGs? [ 0.010268] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.010271] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.010418] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling [ 0.010423] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling [ 0.010608] Serial: AMBA PL011 UART driver [ 0.019915] vgaarb: loaded [ 0.020373] media: Linux media interface: v0.10 [ 0.020391] videodev: Linux video capture interface: v2.00 [ 0.020411] pps_core: LinuxPPS API ver. 1 registered [ 0.020413] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.020420] PTP clock support registered [ 0.021027] clocksource: Switched to clocksource arm_global_timer [ 0.051059] VFS: Disk quotas dquot_6.6.0 [ 0.051096] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.051343] AppArmor: AppArmor Filesystem Enabled [ 0.055462] NET: Registered protocol family 2 [ 0.055823] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.055838] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.055874] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.055935] TCP: Hash tables configured (established 8192 bind 8192) [ 0.055990] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.056015] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.056113] NET: Registered protocol family 1 [ 0.056125] NET: Registered protocol family 44 [ 0.056129] PCI: CLS 0 bytes, default 64 [ 0.056311] Unpacking initramfs... [ 0.720117] Freeing initrd memory: 20032K [ 0.720604] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.721576] Initialise system trusted keyrings [ 0.721595] Key type blacklist registered [ 0.721702] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.724270] zbud: loaded [ 3.081195] Key type asymmetric registered [ 3.081199] Asymmetric key parser 'x509' registered [ 3.081230] bounce: pool size: 64 pages [ 3.081258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 3.081327] io scheduler noop registered [ 3.081329] io scheduler deadline registered [ 3.081423] io scheduler cfq registered (default) [ 3.081426] io scheduler mq-deadline registered [ 3.082914] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver [ 3.086560] mv_xor f1060800.xor: Marvell shared XOR driver [ 3.113573] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 3.113690] mv_xor f1060900.xor: Marvell shared XOR driver [ 3.141566] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) [ 3.142673] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.143586] console [ttyS0] disabled [ 3.163668] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 15625000) is a 16550A [ 3.163699] console [ttyS0] enabled [ 3.184115] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 15625000) is a 16550A [ 3.184543] Serial: AMBA driver [ 3.185826] libphy: Fixed MDIO Bus: probed [ 3.186122] mousedev: PS/2 mouse device common for all mice [ 3.186653] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0 [ 3.189478] ledtrig-cpu: registered to indicate activity on CPUs [ 3.190217] NET: Registered protocol family 10 [ 3.212824] Segment Routing with IPv6 [ 3.212871] mip6: Mobile IPv6 [ 3.212877] NET: Registered protocol family 17 [ 3.212946] mpls_gso: MPLS GSO support [ 3.212979] ThumbEE CPU extension supported. [ 3.212983] Registering SWP/SWPB emulation handler [ 3.213337] registered taskstats version 1 [ 3.213340] Loading compiled-in X.509 certificates [ 3.421011] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 3.421062] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' [ 3.421099] zswap: loaded using pool lzo/zbud [ 3.421201] AppArmor: AppArmor sha1 policy hashing enabled [ 3.422986] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.423110] armada38x-rtc f10a3800.rtc: setting system clock to 2020-01-02 14:18:33 UTC (1577974713) [ 3.423114] sr_init: No PMIC hook to init smartreflex [ 3.429601] Freeing unused kernel memory: 2048K [ 3.441185] Run /init as init process [ 3.669246] libphy: SFP I2C Bus: probed [ 3.670771] libphy: SFP I2C Bus: probed [ 3.670839] ------------[ cut here ]------------ [ 3.670853] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.670855] Modules linked in: i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.670869] CPU: 0 PID: 13 Comm: kworker/0:1 Not tainted 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.670871] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.670879] Workqueue: events deferred_probe_work_func [ 3.670895] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.670903] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.670912] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.670919] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.670924] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.670931] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.670941] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.670949] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.670955] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.670959] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.670965] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.670970] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.670976] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.670980] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.670985] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.670990] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.670995] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.671000] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.671010] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.671016] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.671022] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.671028] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.671031] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.671034] bfa0: 00000000 00000000 00000000 00000000 [ 3.671038] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.671042] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.671045] ---[ end trace 41317458fbc7ddca ]--- [ 3.692485] mvneta f1070000.ethernet eth0: Using device tree mac address d2:63:b4:12:18:cf [ 3.693209] libphy: SFP I2C Bus: probed [ 3.693274] ------------[ cut here ]------------ [ 3.693286] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.693288] Modules linked in: mvneta(+) phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.693304] CPU: 0 PID: 13 Comm: kworker/0:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.693306] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.693314] Workqueue: events deferred_probe_work_func [ 3.693328] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.693336] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.693346] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.693353] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.693359] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.693366] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.693375] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.693383] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.693388] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.693393] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.693398] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.693404] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.693409] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.693414] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.693419] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.693424] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.693428] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.693433] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.693442] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.693448] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.693454] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.693459] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.693462] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.693465] bfa0: 00000000 00000000 00000000 00000000 [ 3.693469] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.693473] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.693476] ---[ end trace 41317458fbc7ddcb ]--- [ 3.694336] mvneta f1030000.ethernet eth1: Using device tree mac address d2:63:b4:12:18:d0 [ 3.694951] libphy: SFP I2C Bus: probed [ 3.695009] ------------[ cut here ]------------ [ 3.695019] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.695020] Modules linked in: mvneta(+) phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.695035] CPU: 0 PID: 13 Comm: kworker/0:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.695036] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.695043] Workqueue: events deferred_probe_work_func [ 3.695053] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.695059] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.695066] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.695073] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.695078] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.695084] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.695092] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.695099] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.695104] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.695108] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.695113] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.695119] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.695124] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.695129] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.695133] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.695138] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.695143] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.695148] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.695156] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.695161] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.695167] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.695172] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.695174] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.695178] bfa0: 00000000 00000000 00000000 00000000 [ 3.695182] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.695185] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.695188] ---[ end trace 41317458fbc7ddcc ]--- [ 3.696069] mvneta f1034000.ethernet eth2: Using device tree mac address d2:63:b4:12:18:d1 [ 3.696682] libphy: SFP I2C Bus: probed [ 3.696738] ------------[ cut here ]------------ [ 3.696748] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.696750] Modules linked in: mvneta(+) phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.696764] CPU: 0 PID: 13 Comm: kworker/0:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.696766] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.696772] Workqueue: events deferred_probe_work_func [ 3.696783] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.696790] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.696797] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.696804] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.696809] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.696815] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.696823] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.696830] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.696835] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.696840] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.696845] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.696851] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.696856] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.696860] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.696865] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.696870] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.696875] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.696880] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.696887] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.696893] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.696898] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.696903] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.696905] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.696909] bfa0: 00000000 00000000 00000000 00000000 [ 3.696913] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.696916] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.696919] ---[ end trace 41317458fbc7ddcd ]--- [ 3.703783] libphy: orion_mdio_bus: probed [ 3.716259] sdhci: Secure Digital Host Controller Interface driver [ 3.716262] sdhci: Copyright(c) Pierre Ossman [ 3.716753] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.729907] sdhci-pxav3 f10d8000.sdhci: Got CD GPIO [ 3.730187] usbcore: registered new interface driver usbfs [ 3.730220] usbcore: registered new interface driver hub [ 3.730696] usbcore: registered new device driver usb [ 3.732795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.737956] SCSI subsystem initialized [ 3.746322] ehci-orion: EHCI orion driver [ 3.746526] orion-ehci f1058000.usb: EHCI Host Controller [ 3.746543] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 [ 3.749249] orion-ehci f1058000.usb: irq 41, io mem 0xf1058000 [ 3.750458] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 3.750478] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2 [ 3.754982] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 3.755015] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000 [ 3.755210] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 3.755214] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.755217] usb usb2: Product: xHCI Host Controller [ 3.755219] usb usb2: Manufacturer: Linux 4.19.0-6-armmp xhci-hcd [ 3.755222] usb usb2: SerialNumber: f10f0000.usb3 [ 3.755526] libphy: SFP I2C Bus: probed [ 3.755540] hub 2-0:1.0: USB hub found [ 3.755564] hub 2-0:1.0: 1 port detected [ 3.755588] ------------[ cut here ]------------ [ 3.755600] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.755602] Modules linked in: marvell xhci_plat_hcd(+) ehci_orion(+) libata(+) xhci_hcd ehci_hcd sdhci_pxav3(+) sdhci_pltfm sdhci scsi_mod mvmdio usbcore mvneta phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.755634] CPU: 0 PID: 13 Comm: kworker/0:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.755636] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.755646] Workqueue: events deferred_probe_work_func [ 3.755660] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.755668] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.755677] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.755683] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.755689] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.755696] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.755706] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.755714] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.755720] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.755725] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.755730] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.755735] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.755741] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.755745] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.755750] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.755755] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.755760] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.755765] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.755767] xhci-hcd f10f0000.usb3: xHCI Host Controller [ 3.755775] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.755777] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3 [ 3.755783] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.755790] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.755794] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed [ 3.755798] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.755800] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.755804] bfa0: 00000000 00000000 00000000 00000000 [ 3.755808] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.755811] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.755814] ---[ end trace 41317458fbc7ddce ]--- [ 3.755836] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.755891] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 3.755895] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.755898] usb usb3: Product: xHCI Host Controller [ 3.755900] usb usb3: Manufacturer: Linux 4.19.0-6-armmp xhci-hcd [ 3.755903] usb usb3: SerialNumber: f10f0000.usb3 [ 3.756157] hub 3-0:1.0: USB hub found [ 3.756173] hub 3-0:1.0: 1 port detected [ 3.756369] libphy: SFP I2C Bus: probed [ 3.756426] ------------[ cut here ]------------ [ 3.756435] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.756436] Modules linked in: marvell xhci_plat_hcd(+) ehci_orion(+) libata(+) [ 3.756444] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.756445] xhci_hcd ehci_hcd sdhci_pxav3(+) sdhci_pltfm sdhci scsi_mod mvmdio usbcore [ 3.756456] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4 [ 3.756457] mvneta phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.756468] CPU: 0 PID: 13 Comm: kworker/0:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.756470] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.756475] Workqueue: events deferred_probe_work_func [ 3.756485] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.756491] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.756499] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.756505] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.756510] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.756516] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.756523] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.756530] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.756535] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.756539] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.756544] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.756550] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.756555] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.756559] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.756564] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.756568] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.756573] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.756578] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.756585] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.756590] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.756596] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.756601] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.756604] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 3.756606] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.756610] bfa0: 00000000 00000000 00000000 00000000 [ 3.756614] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.756617] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.756620] ---[ end trace 41317458fbc7ddcf ]--- [ 3.756630] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000 [ 3.756785] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 3.756789] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.756792] usb usb4: Product: xHCI Host Controller [ 3.756795] usb usb4: Manufacturer: Linux 4.19.0-6-armmp xhci-hcd [ 3.756797] usb usb4: SerialNumber: f10f8000.usb3 [ 3.757102] hub 4-0:1.0: USB hub found [ 3.757120] hub 4-0:1.0: 1 port detected [ 3.757217] libphy: SFP I2C Bus: probed [ 3.757272] ------------[ cut here ]------------ [ 3.757281] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.757282] Modules linked in: marvell xhci_plat_hcd(+) ehci_orion(+) libata(+) xhci_hcd ehci_hcd sdhci_pxav3(+) sdhci_pltfm sdhci scsi_mod mvmdio usbcore mvneta phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.757310] CPU: 0 PID: 13 Comm: kworker/0:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.757312] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.757318] Workqueue: events deferred_probe_work_func [ 3.757327] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.757333] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.757341] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.757347] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.757349] xhci-hcd f10f8000.usb3: xHCI Host Controller [ 3.757354] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.757360] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.757362] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5 [ 3.757370] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.757377] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.757379] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed [ 3.757383] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.757387] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.757392] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.757397] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.757402] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.757407] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.757411] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.757416] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.757421] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.757425] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.757432] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.757434] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.757439] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.757445] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.757450] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.757452] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.757456] bfa0: 00000000 00000000 00000000 00000000 [ 3.757460] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.757463] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.757480] ---[ end trace 41317458fbc7ddd0 ]--- [ 3.757494] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 3.757498] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.757501] usb usb5: Product: xHCI Host Controller [ 3.757504] usb usb5: Manufacturer: Linux 4.19.0-6-armmp xhci-hcd [ 3.757507] usb usb5: SerialNumber: f10f8000.usb3 [ 3.757779] hub 5-0:1.0: USB hub found [ 3.757797] hub 5-0:1.0: 1 port detected [ 3.758101] libphy: SFP I2C Bus: probed [ 3.758158] ------------[ cut here ]------------ [ 3.758168] WARNING: CPU: 0 PID: 13 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.758169] Modules linked in: marvell xhci_plat_hcd ehci_orion(+) libata(+) xhci_hcd ehci_hcd sdhci_pxav3(+) sdhci_pltfm sdhci scsi_mod mvmdio usbcore mvneta phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.758197] CPU: 0 PID: 13 Comm: kworker/0:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.758199] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.758205] Workqueue: events deferred_probe_work_func [ 3.758214] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.758220] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.758228] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.758234] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.758240] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.758247] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.758254] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.758262] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.758267] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.758271] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.758276] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.758282] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.758287] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.758292] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.758296] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.758301] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.758306] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.758310] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.758318] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.758324] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.758329] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.758335] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.758337] Exception stack(0xee96bfb0 to 0xee96bff8) [ 3.758340] bfa0: 00000000 00000000 00000000 00000000 [ 3.758344] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.758348] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.758350] ---[ end trace 41317458fbc7ddd1 ]--- [ 3.758405] libata version 3.00 loaded. [ 3.761490] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 3.761497] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 3.763719] scsi host0: ahci-mvebu [ 3.764335] scsi host1: ahci-mvebu [ 3.764536] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 45 [ 3.764539] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 45 [ 3.764715] ahci-mvebu f10e0000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 3.764721] ahci-mvebu f10e0000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 3.765481] libphy: SFP I2C Bus: probed [ 3.765548] ------------[ cut here ]------------ [ 3.765561] WARNING: CPU: 1 PID: 35 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.765563] Modules linked in: ahci_mvebu(+) libahci_platform libahci marvell xhci_plat_hcd ehci_orion(+) libata xhci_hcd ehci_hcd sdhci_pxav3(+) sdhci_pltfm sdhci scsi_mod mvmdio usbcore mvneta phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.765598] CPU: 1 PID: 35 Comm: kworker/1:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.765600] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.765608] Workqueue: events deferred_probe_work_func [ 3.765624] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.765632] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.765642] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.765649] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.765656] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.765663] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.765672] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.765680] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.765685] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.765690] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.765695] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.765700] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.765706] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.765710] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.765716] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.765720] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.765725] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.765730] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.765738] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.765744] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.765751] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.765756] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.765759] Exception stack(0xeec21fb0 to 0xeec21ff8) [ 3.765763] 1fa0: 00000000 00000000 00000000 00000000 [ 3.765767] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.765770] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.765773] ---[ end trace 41317458fbc7ddd2 ]--- [ 3.766235] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 [ 3.766370] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 3.766374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.766377] usb usb1: Product: EHCI Host Controller [ 3.766380] usb usb1: Manufacturer: Linux 4.19.0-6-armmp ehci_hcd [ 3.766383] usb usb1: SerialNumber: f1058000.usb [ 3.767093] hub 1-0:1.0: USB hub found [ 3.767116] hub 1-0:1.0: 1 port detected [ 3.768301] libphy: SFP I2C Bus: probed [ 3.768364] ------------[ cut here ]------------ [ 3.768376] WARNING: CPU: 1 PID: 35 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.768378] Modules linked in: ahci_mvebu(+) libahci_platform libahci marvell xhci_plat_hcd ehci_orion libata xhci_hcd ehci_hcd sdhci_pxav3(+) sdhci_pltfm sdhci scsi_mod mvmdio usbcore mvneta phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.768413] CPU: 1 PID: 35 Comm: kworker/1:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.768415] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.768421] Workqueue: events deferred_probe_work_func [ 3.768434] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.768441] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.768449] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.768455] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.768461] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.768468] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.768476] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.768484] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.768489] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.768494] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.768499] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.768504] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.768510] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.768514] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.768520] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.768524] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.768529] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.768534] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.768542] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.768548] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.768554] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.768560] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.768563] Exception stack(0xeec21fb0 to 0xeec21ff8) [ 3.768566] 1fa0: 00000000 00000000 00000000 00000000 [ 3.768571] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.768574] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.768577] ---[ end trace 41317458fbc7ddd3 ]--- [ 3.776123] scsi host2: ahci-mvebu [ 3.782819] scsi host3: ahci-mvebu [ 3.783024] ata3: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x100 irq 46 [ 3.783028] ata4: SATA max UDMA/133 mmio [mem 0xf10e0000-0xf10e1fff] port 0x180 irq 46 [ 3.783508] libphy: SFP I2C Bus: probed [ 3.783571] ------------[ cut here ]------------ [ 3.783585] WARNING: CPU: 1 PID: 35 at kernel/module.c:1140 module_put+0xe8/0xf4 [ 3.783588] Modules linked in: ahci_mvebu libahci_platform libahci marvell xhci_plat_hcd ehci_orion libata xhci_hcd ehci_hcd sdhci_pxav3(+) sdhci_pltfm sdhci scsi_mod mvmdio usbcore mvneta phylink i2c_mv64xxx spi_orion sfp mdio_i2c [ 3.783622] CPU: 1 PID: 35 Comm: kworker/1:1 Tainted: G W 4.19.0-6-armmp #1 Debian 4.19.67-2+deb10u2 [ 3.783624] Hardware name: Marvell Armada 380/385 (Device Tree) [ 3.783632] Workqueue: events deferred_probe_work_func [ 3.783646] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [ 3.783653] [] (show_stack) from [] (dump_stack+0xbc/0xd0) [ 3.783665] [] (dump_stack) from [] (__warn.part.3+0xcc/0xe8) [ 3.783671] [] (__warn.part.3) from [] (warn_slowpath_null+0x54/0x5c) [ 3.783677] [] (warn_slowpath_null) from [] (module_put+0xe8/0xf4) [ 3.783684] [] (module_put) from [] (i2c_put_adapter+0x2c/0x30) [ 3.783696] [] (i2c_put_adapter) from [] (sfp_cleanup+0x50/0x5c [sfp]) [ 3.783704] [] (sfp_cleanup [sfp]) from [] (devm_action_release+0x1c/0x20) [ 3.783710] [] (devm_action_release) from [] (release_nodes+0x1ec/0x2a0) [ 3.783714] [] (release_nodes) from [] (devres_release_all+0x40/0x5c) [ 3.783720] [] (devres_release_all) from [] (really_probe+0xd8/0x3d8) [ 3.783725] [] (really_probe) from [] (driver_probe_device+0x174/0x1cc) [ 3.783730] [] (driver_probe_device) from [] (__device_attach_driver+0xb0/0x114) [ 3.783735] [] (__device_attach_driver) from [] (bus_for_each_drv+0x90/0xd4) [ 3.783740] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x168) [ 3.783745] [] (__device_attach) from [] (device_initial_probe+0x1c/0x20) [ 3.783750] [] (device_initial_probe) from [] (bus_probe_device+0x94/0x9c) [ 3.783755] [] (bus_probe_device) from [] (deferred_probe_work_func+0x94/0xd4) [ 3.783763] [] (deferred_probe_work_func) from [] (process_one_work+0x1c8/0x4a4) [ 3.783769] [] (process_one_work) from [] (worker_thread+0x60/0x544) [ 3.783775] [] (worker_thread) from [] (kthread+0x16c/0x174) [ 3.783781] [] (kthread) from [] (ret_from_fork+0x14/0x2c) [ 3.783783] Exception stack(0xeec21fb0 to 0xeec21ff8) [ 3.783787] 1fa0: 00000000 00000000 00000000 00000000 [ 3.783791] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.783794] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.783797] ---[ end trace 41317458fbc7ddd4 ]--- [ 3.787856] pca953x 0-0020: 0-0020 supply vcc not found, using dummy regulator [ 3.787893] pca953x 0-0020: Linked as a consumer to regulator.0 [ 3.788357] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA [ 3.789233] libphy: SFP I2C Bus: probed [ 3.789377] GPIO line 2032 (pcie1.0-clkreq) hogged as input [ 3.789936] GPIO line 2035 (pcie1.0-w-disable) hogged as output/low [ 3.791523] GPIO line 2037 (usb3-current-limit) hogged as input [ 3.792745] GPIO line 2038 (usb3-power) hogged as output/high [ 3.792994] sfp sfp: Host maximum power 2.0W [ 3.796041] GPIO line 2043 (m.2 devslp) hogged as output/low [ 3.797051] GPIO line 2036 (pcie2.0-clkreq) hogged as input [ 3.800154] GPIO line 2039 (pcie2.0-w-disable) hogged as output/low [ 3.801113] mvebu-pcie soc:pcie: /soc/pcie/pcie@2,0: reset gpio is active low [ 3.801997] mvebu-pcie soc:pcie: /soc/pcie/pcie@3,0: reset gpio is active low [ 3.826087] mmc0: new high speed SDHC card at address 0007 [ 3.829860] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.832893] mmcblk0: mmc0:0007 SL32G 29.0 GiB [ 3.840793] mmcblk0: p1 [ 3.843406] random: fast init done [ 3.847547] mv88e6085 f1072004.mdio-mii:04: switch 0x1760 detected: Marvell 88E6176, revision 1 [ 4.017175] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00 [ 4.017182] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.017186] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] [ 4.017190] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 4.017300] pci 0000:00:02.0: [11ab:6828] type 01 class 0x060400 [ 4.017463] pci 0000:00:03.0: [11ab:6828] type 01 class 0x060400 [ 4.018289] PCI: bus0: Fast back to back transfers disabled [ 4.018294] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.018299] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.018374] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601 [ 4.018393] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x0007] [ 4.018400] pci 0000:01:00.0: reg 0x14: [io 0x0000-0x0003] [ 4.018407] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x0007] [ 4.018414] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x0003] [ 4.018421] pci 0000:01:00.0: reg 0x20: [io 0x0000-0x001f] [ 4.018428] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 4.018435] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 4.019390] PCI: bus1: Fast back to back transfers disabled [ 4.019396] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.019473] pci 0000:02:00.0: [168c:003c] type 00 class 0x028000 [ 4.019499] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 4.019525] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 4.019590] pci 0000:02:00.0: supports D1 D2 [ 4.019704] pci 0000:00:03.0: ASPM: current common clock configuration is broken, reconfiguring [ 4.030878] libphy: mv88e6xxx SMI: probed [ 4.053861] PCI: bus2: Fast back to back transfers enabled [ 4.053870] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 4.053902] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff] [ 4.053907] pci 0000:00:03.0: BAR 8: assigned [mem 0xe0200000-0xe04fffff] [ 4.053911] pci 0000:00:02.0: BAR 7: assigned [io 0x10000-0x10fff] [ 4.053918] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 4.053922] pci 0000:01:00.0: BAR 5: assigned [mem 0xe0010000-0xe00101ff] [ 4.053928] pci 0000:01:00.0: BAR 4: assigned [io 0x10000-0x1001f] [ 4.053933] pci 0000:01:00.0: BAR 0: assigned [io 0x10020-0x10027] [ 4.053938] pci 0000:01:00.0: BAR 2: assigned [io 0x10028-0x1002f] [ 4.053943] pci 0000:01:00.0: BAR 1: assigned [io 0x10030-0x10033] [ 4.053948] pci 0000:01:00.0: BAR 3: assigned [io 0x10034-0x10037] [ 4.053954] pci 0000:00:02.0: PCI bridge to [bus 01] [ 4.053957] pci 0000:00:02.0: bridge window [io 0x10000-0x10fff] [ 4.053962] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xe00fffff] [ 4.053970] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe03fffff 64bit] [ 4.053975] pci 0000:02:00.0: BAR 0: error updating (0xe0200004 != 0xffffffff) [ 4.061241] pci 0000:02:00.0: BAR 0: error updating (high 0x000000 != 0xffffffff) [ 4.068749] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0400000-0xe040ffff pref] [ 4.068753] pci 0000:00:03.0: PCI bridge to [bus 02] [ 4.068758] pci 0000:00:03.0: bridge window [mem 0xe0200000-0xe04fffff] [ 4.068836] pcieport 0000:00:02.0: enabling device (0140 -> 0143) [ 4.068909] pcieport 0000:00:03.0: enabling device (0140 -> 0142) [ 4.069047] ahci 0000:01:00.0: version 3.0 [ 4.069057] ahci 0000:01:00.0: enabling device (0140 -> 0143) [ 4.069153] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 4.069182] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.069187] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 4.073101] scsi host4: ahci [ 4.074485] scsi host5: ahci [ 4.074664] ata5: SATA max UDMA/133 abar m512@0xe0010000 port 0xe0010100 irq 81 [ 4.074668] ata6: SATA max UDMA/133 abar m512@0xe0010000 port 0xe0010180 irq 81 [ 4.089037] ata2: SATA link down (SStatus 0 SControl 300) [ 4.093049] usb 4-1: new high-speed USB device number 2 using xhci-hcd [ 4.102865] ata3: SATA link down (SStatus 0 SControl 300) [ 4.140255] sfp sfp: module OEM SFP-T rev B sn A6C180710075 dc 180721 [ 4.140261] sfp sfp: Unknown/unsupported extended compliance code: 0x01 [ 4.142831] ata4: SATA link down (SStatus 0 SControl 300) [ 4.237040] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.239622] ata1.00: ATA-9: LITEON LST-32S9G-11 SATA 32GB, ZS2110B, max UDMA/133 [ 4.239626] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 32) [ 4.240082] ata1.00: configured for UDMA/133 [ 4.240373] scsi 0:0:0:0: Direct-Access ATA LITEON LST-32S9G 10B PQ: 0 ANSI: 5 [ 4.248294] usb 4-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.03 [ 4.248299] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.248302] usb 4-1: Product: Mass Storage [ 4.248305] usb 4-1: Manufacturer: Generic [ 4.248308] usb 4-1: SerialNumber: 3C17A0F8 [ 4.254734] usb-storage 4-1:1.0: USB Mass Storage device detected [ 4.255045] scsi host6: usb-storage 4-1:1.0 [ 4.255254] usbcore: registered new interface driver usb-storage [ 4.256253] usbcore: registered new interface driver uas [ 4.390658] ata5: SATA link down (SStatus 0 SControl 300) [ 4.703251] ata6: SATA link down (SStatus 0 SControl 300) [ 4.710269] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 4.710287] sd 0:0:0:0: [sda] Write Protect is off [ 4.710291] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.710313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.713496] sda: sda1 sda2 sda3 < sda5 > [ 4.714287] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.803496] mv88e6085 f1072004.mdio-mii:04 lan5 (uninitialized): PHY [mv88e6xxx-0:00] driver [Marvell 88E1540] [ 4.885244] mv88e6085 f1072004.mdio-mii:04 lan4 (uninitialized): PHY [mv88e6xxx-0:01] driver [Marvell 88E1540] [ 4.969241] mv88e6085 f1072004.mdio-mii:04 lan3 (uninitialized): PHY [mv88e6xxx-0:02] driver [Marvell 88E1540] [ 5.050995] mv88e6085 f1072004.mdio-mii:04 lan2 (uninitialized): PHY [mv88e6xxx-0:03] driver [Marvell 88E1540] [ 5.129240] mv88e6085 f1072004.mdio-mii:04 lan1 (uninitialized): PHY [mv88e6xxx-0:04] driver [Marvell 88E1540] [ 5.141444] DSA: tree 0 setup [ 5.216291] PM: Image not found (code -22) [ 5.282898] scsi 6:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 5.287030] sd 6:0:0:0: [sdb] 4014080 512-byte logical blocks: (2.06 GB/1.91 GiB) [ 5.287695] sd 6:0:0:0: [sdb] Write Protect is off [ 5.287700] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 5.288545] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.294375] sdb: sdb1 [ 5.300759] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 5.328282] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.583135] systemd[1]: Inserted module 'autofs4' [ 5.595606] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.595843] systemd[1]: Detected architecture arm. [ 5.601291] systemd[1]: Set hostname to . [ 5.602041] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 5.879938] random: systemd: uninitialized urandom read (16 bytes read) [ 5.883099] random: systemd: uninitialized urandom read (16 bytes read) [ 5.883444] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.883562] random: systemd: uninitialized urandom read (16 bytes read) [ 5.883676] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.885859] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.886466] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.886720] systemd[1]: Listening on udev Kernel Socket. [ 5.886776] systemd[1]: Reached target Remote File Systems. [ 6.004257] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.257488] systemd-journald[205]: Received request to flush runtime journal from PID 1 [ 6.496189] m25p80 spi1.0: w25q32 (4096 Kbytes) [ 6.547159] orion_wdt: Initial timeout 171 sec [ 6.600403] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.600496] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 6.809048] marvell-cesa f1090000.crypto: CESA device successfully registered [ 7.115008] ath10k_pci 0000:02:00.0: of_irq_parse_pci: failed with rc=134 [ 7.141085] ath10k_pci 0000:02:00.0: Refused to change power state, currently in D3 [ 7.171303] ath10k_pci 0000:02:00.0: failed to wake up device : -110 [ 7.173829] ath10k_pci: probe of 0000:02:00.0 failed with error -110 [ 7.532008] Adding 997372k swap on /dev/sda5. Priority:-2 extents:1 across:997372k SSFS [ 7.606989] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 7.609456] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 7.931700] audit: type=1400 audit(1577974718.004:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=320 comm="apparmor_parser" [ 7.932773] audit: type=1400 audit(1577974718.004:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=320 comm="apparmor_parser" [ 8.017241] audit: type=1400 audit(1577974718.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=321 comm="apparmor_parser" [ 8.017763] audit: type=1400 audit(1577974718.092:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=321 comm="apparmor_parser" [ 8.018330] audit: type=1400 audit(1577974718.092:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=321 comm="apparmor_parser" [ 8.213977] mvneta f1034000.ethernet eth2: configuring for inband/sgmii link mode [ 8.421981] mvneta f1034000.ethernet eth2: PHY [i2c:sfp:16] driver [Marvell 88E1111] [ 8.497427] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 12.579654] mvneta f1034000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off [ 12.579670] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 28.985337] random: crng init done [ 28.985342] random: 7 urandom warning(s) missed due to ratelimiting ```

Interestingly although the u-boot and lk seems to be the same (or at least very close) the results differ. Upstream debian at least finds both pci devices although it can not load the wifi card. On our release the wifi card is hiding the sata one totally and also is not initialized correctly.

On the same u-boot but lk4.14. both pcie devices work fine but sfp is not functional :)
On dev kernel 5.4.x it looks pretty much the same as in 4.19.

Any ideas? Do we even try fixing this in 4.19 or just try to get 5.4 working? Does anyone apart from me even use the clearfog in production environment and cares about this?

Greetings, count-doku

EDIT2: Would it maybe help to get this patch working on dev? I could not find this IRQ handling on 5.4 kernel, patch doesn't fit anymore though. https://github.com/armbian/build/blob/master/patch/kernel/mvebu-dev/need-checking/0040-updates-pci.patch

Heisath commented 4 years ago

This is not a thing anymore. See this PR for work on fixing it: #1722