Closed fbeider closed 1 year ago
Hello,
Take a look to the README again : https://github.com/armel/M5HamRadio#ini-loader You need to select your ini config file during the Ini Loader step (blue progress bar).
Armel F4HWN.
I cannot select a config file as there are no hardware buttons on M5 Core 2 touch screen only. No buttons appear on the screen to touch. I do see the inil oader v.07 on the screen
Sure, of course you've got (virtual) buttons. Take a look a this image...
Armel F4HWN.
I see the issue. When I take photo with Camera it "sees" the buttons. But my eye cannot see them
Ok, so during the Ini Loader step (blue progress bar),
1 - touch middle virtual button to enter into Ini Loader 2 - use left / right virtual buttons to choose your ini file. 3 - touch middle virtual button to select it.
Armel F4HWN.
I got it working.
Thank You!
Good news. Thank you. I close this issue.
73'
Armel F4HWN
Hello
I have a M5 core2 touch screen only (no physical buttons).
Using M5 burner I installed .8 for the core 2.
Get the error message Ini file does not exist failed to load config file
Here is the ouptut of the serial monitor. The .ini file appears to be loading from the SD card
rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13924 ho 0 tail 12 room 4 load:0x40080400,len:3600 entry 0x400805f0
LittleFS/DXTracker.gz LittleFS/ICKeyer.gz LittleFS/ICMultiMeter.gz LittleFS/ICSMeter.gz
SD/IC705BT.ini
/.backup.ini [FROM M5Burner] Serial Port Disconnected.