search

armtronix / arduino-LoRa-STM32

Modified lib of sandeepmistry arduino-LoRa for STM32F103
MIT License
43 stars 16 forks source link

Can I use lorawan in this? #1

Closed tusharvb19 closed 5 years ago

tusharvb19 commented 5 years ago

As this board comes with SX1276 and STM32 can I use this for LoRaWAN using lwic stack? If yes can guide for it? Thanks in advance.

armtronix commented 5 years ago

Plz refer this https://github.com/armtronix/arduino-lmic

tusharvb19 commented 5 years ago

Thank you for your quick reply. Also, can I make one of the STM32 Lora module to act as gateway using rpi or something else?

armtronix commented 5 years ago

Sorry we have never tried it.Our stm32 board can act as node ,code is available on the previously sent link

tusharvb19 commented 5 years ago

Okay. But if I can use the SX1276 from the module externally to use with Rpi as guided here: https://www.instructables.com/id/Use-Lora-Shield-and-RPi-to-Build-a-LoRaWAN-Gateway/ or https://github.com/tftelkamp/single_chan_pkt_fwd ???

armtronix commented 5 years ago

Should be possible . Not tested . Probably some wire soldering may be required as the pins of lora module are not exposed

tusharvb19 commented 5 years ago

I can test this but will need hardware details with respect to above links. As the SPI pins will be shared by both rpi and stm32 and will try to place an empty sketch in stm32. Thanks for the co-operation.

tusharvb19 commented 5 years ago

Hello, Can I get hardware details for Bord 0.3 i.e. STM32 +LoRa? Need to find SPI pins of LoRa Module. Thanks in advance.

armtronix commented 5 years ago

Can you plz send an email on sales@armtronix.in