search

arnemauer / Ducobox-ESPEasy-Plugin

Plugin voor ESPEasy om een Ducobox Silent / Focus / WTW Energy Comfort aan te sturen en sensoren uit te lezen. Er zijn twee plugins: een ducobox RF gateway en ducobox serial gateway.
73 stars 16 forks source link

Ventilationmode from plugin Duco ventilation remote stays on automatic as feedback #120

Open Jozziej opened 1 year ago

Jozziej commented 1 year ago

Ventilationmode from plugin Duco ventilation remote stays on automatic as feedback, this worked before as I display the ventilation mode in Home Assistant

Schermafbeelding 2022-11-06 110357 Schermafbeelding 2022-11-06 110645

Firmware 24 October is used, rollback to 4 July firmware doesn't fix it either.

Loose plugin Duco_Ventilationmode does work, sadly that it requires to have another plugin actively sending to the controller.

arnemauer commented 1 year ago

Make us happy with some logs :)

Jozziej commented 1 year ago
Log ``` 87581606: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 87581606: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 87581607: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 87581948: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 87581959: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 87583263: [P154] DUCO Ext. CO2 Sensor: Serial reading timeout 87583264: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 87585189: [P150] RF GW: UPDATE by PLUGIN_READ 87585486: [P151] DUCO SER GW: Start readNetworkList 87585694: [P151] DUCO SER GW: Received correct response on network 87585707: [P151] DUCO SER GW: Send command successfull! 87585729: [P151] DUCO SER GW: Ducobox row found! 87585730: [P151] DUCO SER GW: New Ventilationmode value: 11 87585731: [P151] DUCO SER GW: New Countdown value: 0 87585731: [P151] DUCO SER GW: New Ventilation_Percentage value: 20 87585731: [P151] DUCO SER GW: New Current_Fan_Value value: 7 87585809: [P151] DUCO SER GW: End of message received. 87585810: [P151] DUCO SER GW: Stop reading from serial 87588819: WD : Uptime 1460 ConnectFailures 0 FreeMem 18416 WiFiStatus 3 ESPeasy internal wifi status: Conn. IP Init 87591483: [P151] DUCO SER GW: Start readNetworkList 87591644: [P151] DUCO SER GW: Received correct response on network 87591659: [P151] DUCO SER GW: Send command successfull! 87591684: [P151] DUCO SER GW: Ducobox row found! 87591685: [P151] DUCO SER GW: New Ventilationmode value: 11 87591685: [P151] DUCO SER GW: New Countdown value: 0 87591686: [P151] DUCO SER GW: New Ventilation_Percentage value: 20 87591686: [P151] DUCO SER GW: New Current_Fan_Value value: 7 87591764: [P151] DUCO SER GW: End of message received. 87591764: [P151] DUCO SER GW: Stop reading from serial 87593608: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 87593608: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 87593608: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 87593950: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 87593963: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 87594709: [P154] DUCO Ext. CO2 Sensor: CO2 PPM: 414 = 414 PPM 87594716: [P154] DUCO Ext. CO2 Sensor: End of message received. 87594716: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 87597189: [P150] RF GW: UPDATE by PLUGIN_READ 87597485: [P151] DUCO SER GW: Start readNetworkList 87597648: [P151] DUCO SER GW: Received correct response on network 87597662: [P151] DUCO SER GW: Send command successfull! 87597736: [P151] DUCO SER GW: Ducobox row found! 87597736: [P151] DUCO SER GW: Status value not found. 87597737: [P151] DUCO SER GW: New Countdown value: 0 87597737: [P151] DUCO SER GW: Numeric value not found. 87597737: [P151] DUCO SER GW: Numeric value not found. 87597767: [P151] DUCO SER GW: End of message received. 87597768: [P151] DUCO SER GW: Stop reading from serial 87603483: [P151] DUCO SER GW: Start readNetworkList 87603629: [P151] DUCO SER GW: Received correct response on network 87603646: [P151] DUCO SER GW: Send command successfull! 87603669: [P151] DUCO SER GW: Ducobox row found! 87603670: [P151] DUCO SER GW: New Ventilationmode value: 11 87603670: [P151] DUCO SER GW: New Countdown value: 0 87603671: [P151] DUCO SER GW: New Ventilation_Percentage value: 20 87603671: [P151] DUCO SER GW: New Current_Fan_Value value: 7 87603754: [P151] DUCO SER GW: End of message received. 87603755: [P151] DUCO SER GW: Stop reading from serial 87605606: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 87605606: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 87605607: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 87606002: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 87606016: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 87606043: [P154] DUCO Ext. CO2 Sensor: CO2 PPM: 414 = 414 PPM 87606049: [P154] DUCO Ext. CO2 Sensor: End of message received. 87606049: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 87607144: HTTP: VENTMODE,LOW 87607146: Command: VENTMODE 87607147: [P150] RF GW: Sent command 'VENTMODE low' to DUCO unit 87607155: [P150] RF GW: 0 - requestVentilationMode(); 87607155: [P150] RF GW: 1 - sendVentilationModeMessage(); 87607155: [P150] RF GW: 2 - Start waiting for ack... 87607466: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87607467: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87607467: [P150] RF GW: 2 - Start waiting for ack... 87607786: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87607787: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87607787: [P150] RF GW: 2 - Start waiting for ack... 87608106: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87608106: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87608107: [P150] RF GW: 2 - Start waiting for ack... 87608420: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87608420: [P150] RF GW: 1 - CheckforAck: no ack received, cancel retrying. 87608694: [P150] RF GW: RX FIFO OVERFLOW -> idle, flush RX FIFO and switch to RX state. 87608905: HTTP: VENTMODE,LOW 87608907: Command: VENTMODE 87608908: [P150] RF GW: Sent command 'VENTMODE low' to DUCO unit 87608916: [P150] RF GW: 0 - requestVentilationMode(); 87608916: [P150] RF GW: 1 - sendVentilationModeMessage(); 87608916: [P150] RF GW: 2 - Start waiting for ack... 87609189: [P150] RF GW: UPDATE by PLUGIN_READ 87609242: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87609242: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87609242: [P150] RF GW: 2 - Start waiting for ack... 87609484: [P151] DUCO SER GW: Start readNetworkList 87609562: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87609562: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87609562: [P150] RF GW: 2 - Start waiting for ack... 87609641: [P151] DUCO SER GW: Received correct response on network 87609654: [P151] DUCO SER GW: Send command successfull! 87609681: [P151] DUCO SER GW: Ducobox row found! 87609682: [P151] DUCO SER GW: New Ventilationmode value: 1 87609682: [P151] DUCO SER GW: New Countdown value: 1800 87609683: [P151] DUCO SER GW: New Ventilation_Percentage value: 20 87609683: [P151] DUCO SER GW: New Current_Fan_Value value: 7 87609767: [P151] DUCO SER GW: End of message received. 87609767: [P151] DUCO SER GW: Stop reading from serial 87609881: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87609882: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87609882: [P150] RF GW: 2 - Start waiting for ack... 87610184: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87610184: [P150] RF GW: 1 - CheckforAck: no ack received, cancel retrying. 87610270: [P151] DUCO SER GW: New value for Ventilationmode 87614366: HTTP: VENTMODE,MIDDLE 87614368: Command: VENTMODE 87614369: [P150] RF GW: Sent command 'VENTMODE middle' to DUCO unit 87614377: [P150] RF GW: 0 - requestVentilationMode(); 87614377: [P150] RF GW: 1 - sendVentilationModeMessage(); 87614377: [P150] RF GW: 2 - Start waiting for ack... 87614702: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87614703: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87614703: [P150] RF GW: 2 - Start waiting for ack... 87615022: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87615022: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87615023: [P150] RF GW: 2 - Start waiting for ack... 87615343: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87615343: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87615343: [P150] RF GW: 2 - Start waiting for ack... 87615482: [P151] DUCO SER GW: Start readNetworkList 87615676: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87615676: [P150] RF GW: 1 - CheckforAck: no ack received, cancel retrying. 87615703: [P151] DUCO SER GW: Received correct response on network 87615735: HTTP: VENTMODE,MIDDLE 87615739: Command: VENTMODE 87615740: [P150] RF GW: Sent command 'VENTMODE middle' to DUCO unit 87615747: [P150] RF GW: 0 - requestVentilationMode(); 87615748: [P150] RF GW: 1 - sendVentilationModeMessage(); 87615748: [P150] RF GW: 2 - Start waiting for ack... 87615831: [P151] DUCO SER GW: Send command successfull! 87615836: [P151] DUCO SER GW: End of message received. 87615836: [P151] DUCO SER GW: Stop reading from serial 87616057: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87616057: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87616058: [P150] RF GW: 2 - Start waiting for ack... 87616380: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87616380: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87616380: [P150] RF GW: 2 - Start waiting for ack... 87616690: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87616691: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 87616691: [P150] RF GW: 2 - Start waiting for ack... 87617004: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 87617004: [P150] RF GW: 1 - CheckforAck: no ack received, cancel retrying. 87617607: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 87617607: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 87617607: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 87617996: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 87618008: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 87618820: WD : Uptime 1460 ConnectFailures 0 FreeMem 18560 WiFiStatus 3 ESPeasy internal wifi status: Conn. IP Init 87619263: [P154] DUCO Ext. CO2 Sensor: Serial reading timeout 87619263: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 87621189: [P150] RF GW: UPDATE by PLUGIN_READ 87621485: [P151] DUCO SER GW: Start readNetworkList 87621641: [P151] DUCO SER GW: Received correct response on network 87621652: [P151] DUCO SER GW: Send command successfull! 87621681: [P151] DUCO SER GW: Ducobox row found! 87621682: [P151] DUCO SER GW: New Ventilationmode value: 1 87621682: [P151] DUCO SER GW: New Countdown value: 1800 87621682: [P151] DUCO SER GW: New Ventilation_Percentage value: 20 87621683: [P151] DUCO SER GW: New Current_Fan_Value value: 7 87621761: [P151] DUCO SER GW: End of message received. 87621761: [P151] DUCO SER GW: Stop reading from serial 87627483: [P151] DUCO SER GW: Start readNetworkList 87627649: [P151] DUCO SER GW: Received correct response on network 87627659: [P151] DUCO SER GW: Send command successfull! 87627690: [P151] DUCO SER GW: Ducobox row found! 87627691: [P151] DUCO SER GW: New Ventilationmode value: 1 87627691: [P151] DUCO SER GW: New Countdown value: 1795 87627691: [P151] DUCO SER GW: New Ventilation_Percentage value: 20 87627692: [P151] DUCO SER GW: New Current_Fan_Value value: 7 87627771: [P151] DUCO SER GW: End of message received. 87627771: [P151] DUCO SER GW: Stop reading from serial 87627819: [P150] RF GW: 87627801 - 87627819 = 18 87627820: [P150] RF GW: rxBYTES: 10 (hex) 16 (dec); getMarcState 0D 87627821: [P150] RF GW: 0 - Ignore message, not our networkID. 87629606: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 87629606: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 87629606: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 87629950: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 87629962: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 87631234: [P154] DUCO Ext. CO2 Sensor: CO2 PPM: 414 = 414 PPM 87631241: [P154] DUCO Ext. CO2 Sensor: End of message received. 87631241: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 87633189: [P150] RF GW: UPDATE by PLUGIN_READ 87633485: [P151] DUCO SER GW: Start readNetworkList 87633641: [P151] DUCO SER GW: Received correct response on network 87633654: [P151] DUCO SER GW: Send command successfull! 87633681: [P151] DUCO SER GW: Ducobox row found! 87633682: [P151] DUCO SER GW: New Ventilationmode value: 2 87633682: [P151] DUCO SER GW: New Countdown value: 1795 87633682: [P151] DUCO SER GW: New Ventilation_Percentage value: 40 87633683: [P151] DUCO SER GW: New Current_Fan_Value value: 18 87633762: [P151] DUCO SER GW: End of message received. 87633762: [P151] DUCO SER GW: Stop reading from serial 87634269: [P151] DUCO SER GW: New value for Ventilationmode 87634454: [P150] RF GW: 87634444 - 87634454 = 10 87634455: [P150] RF GW: rxBYTES: 14 (hex) 20 (dec); getMarcState 0D 87638495: [P150] RF GW: 87638492 - 87638494 = 2 87638495: [P150] RF GW: rxBYTES: 0C (hex) 12 (dec); getMarcState 0D 87639525: [P151] DUCO SER GW: Start readNetworkList 87639691: [P151] DUCO SER GW: Received correct response on network 87639702: [P151] DUCO SER GW: Send command successfull! 87639731: [P151] DUCO SER GW: Ducobox row found! 87639732: [P151] DUCO SER GW: New Ventilationmode value: 2 87639732: [P151] DUCO SER GW: New Countdown value: 1790 87639732: [P151] DUCO SER GW: New Ventilation_Percentage value: 40 87639733: [P151] DUCO SER GW: New Current_Fan_Value value: 25 87639811: [P151] DUCO SER GW: End of message received. 87639811: [P151] DUCO SER GW: Stop reading from serial 87641606: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 87641606: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 87641607: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 87641985: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 87641999: [P150] RF GW: 87641997 - 87641998 = 1 87641999: [P150] RF GW: rxBYTES: 0C (hex) 12 (dec); getMarcState 0D 87642000: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 87642026: [P154] DUCO Ext. CO2 Sensor: CO2 PPM: 414 = 414 PPM 87642032: [P154] DUCO Ext. CO2 Sensor: End of message received. 87642033: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 87645189: [P150] RF GW: UPDATE by PLUGIN_READ 87645484: [P151] DUCO SER GW: Start readNetworkList 87645640: [P151] DUCO SER GW: Received correct response on network 87645655: [P151] DUCO SER GW: Send command successfull! 87645680: [P151] DUCO SER GW: Ducobox row found! 87645681: [P151] DUCO SER GW: New Ventilationmode value: 2 87645681: [P151] DUCO SER GW: New Countdown value: 1785 87645681: [P151] DUCO SER GW: New Ventilation_Percentage value: 40 87645682: [P151] DUCO SER GW: New Current_Fan_Value value: 26 87645760: [P151] DUCO SER GW: End of message received. 87645760: [P151] DUCO SER GW: Stop reading from serial 87648819: WD : Uptime 1461 ConnectFailures 0 FreeMem 18528 WiFiStatus 3 ESPeasy internal wifi status: Conn. IP Init 87651483: [P151] DUCO SER GW: Start readNetworkList 87651635: [P151] DUCO SER GW: Received correct response on network 87651647: [P151] DUCO SER GW: Send command successfull! 87651675: [P151] DUCO SER GW: Ducobox row found! 87651676: [P151] DUCO SER GW: New Ventilationmode value: 2 87651676: [P151] DUCO SER GW: New Countdown value: 1780 87651676: [P151] DUCO SER GW: New Ventilation_Percentage value: 40 87651677: [P151] DUCO SER GW: New Current_Fan_Value value: 25 87651755: [P151] DUCO SER GW: End of message received. 87651755: [P151] DUCO SER GW: Stop reading from serial ```
arnemauer commented 1 year ago

The RF-plugin doesn't receive an answer from the Ducobox. If you change the ventilation mode by pressing the blue buttons in Espeasy is the ducobox responding/changing ventilation speed?

Jozziej commented 1 year ago

Here is a new set of logs, went from High to Medium to Low

Log ``` 311462845: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311462845: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 311462846: [P150] RF GW: 2 - Start waiting for ack... 311463159: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311463159: [P150] RF GW: 1 - CheckforAck: no ack received, cancel retrying. 311472802: [P150] RF GW: UPDATE by PLUGIN_READ 311472840: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 311472840: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 311472840: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 311472987: [P151] DUCO SER GW: Serial port in use, set flag to read data later. 311473171: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 311473184: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 311474734: [P154] DUCO Ext. CO2 Sensor: Serial reading timeout 311474734: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 311474735: [P151] DUCO SER GW: Start readNetworkList 311474908: [P151] DUCO SER GW: Send command successfull! 311475322: [P151] DUCO SER GW: Received invalid response on network 311475322: [P151] DUCO SER GW: Stop reading from serial 311475323: [P151] DUCO SER GW: End of message received. 311475323: [P151] DUCO SER GW: Stop reading from serial 311478986: [P151] DUCO SER GW: Start readNetworkList 311479134: [P151] DUCO SER GW: Received correct response on network 311479138: [P151] DUCO SER GW: End of message received. 311479138: [P151] DUCO SER GW: Stop reading from serial 311480728: HTTP: VENTMODE,MIDDLE 311480729: Command: VENTMODE 311480731: [P150] RF GW: Sent command 'VENTMODE middle' to DUCO unit 311480739: [P150] RF GW: 0 - requestVentilationMode(); 311480739: [P150] RF GW: 1 - sendVentilationModeMessage(); 311480739: [P150] RF GW: 2 - Start waiting for ack... 311481053: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311481053: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 311481054: [P150] RF GW: 2 - Start waiting for ack... 311481372: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311481372: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 311481373: [P150] RF GW: 2 - Start waiting for ack... 311481692: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311481692: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 311481693: [P150] RF GW: 2 - Start waiting for ack... 311482046: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311482046: [P150] RF GW: 1 - CheckforAck: no ack received, cancel retrying. 311484802: [P150] RF GW: UPDATE by PLUGIN_READ 311484840: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 311484840: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 311484840: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 311484988: [P151] DUCO SER GW: Serial port in use, set flag to read data later. 311485247: [P154] DUCO Ext. CO2 Sensor: Send command successfull! 311485294: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 311486268: [P154] DUCO Ext. CO2 Sensor: CO2 PPM: 555 = 555 PPM 311486278: [P154] DUCO Ext. CO2 Sensor: End of message received. 311486278: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 311486734: [P151] DUCO SER GW: Start readNetworkList 311486882: [P151] DUCO SER GW: Received correct response on network 311486887: [P151] DUCO SER GW: End of message received. 311486887: [P151] DUCO SER GW: Stop reading from serial 311491141: [P150] RF GW: 2 - Start waiting for ack... 311491151: [P151] DUCO SER GW: Received correct response on network 311491154: [P151] DUCO SER GW: Send command successfull! 311491191: [P151] DUCO SER GW: Ducobox row found! 311491192: [P151] DUCO SER GW: New Ventilationmode value: 2 311491192: [P151] DUCO SER GW: New Countdown value: 1795 311491193: [P151] DUCO SER GW: New Ventilation_Percentage value: 40 311491193: [P151] DUCO SER GW: New Current_Fan_Value value: 25 311491276: [P151] DUCO SER GW: End of message received. 311491276: [P151] DUCO SER GW: Stop reading from serial 311491460: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311491461: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 311491461: [P150] RF GW: 2 - Start waiting for ack... 311491774: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 311491774: [P150] RF GW: 1 - CheckforAck: no ack received, cancel retrying. 311492056: WD : Uptime 5192 ConnectFailures 0 FreeMem 18328 WiFiStatus 3 ESPeasy internal wifi status: Conn. IP Init 311496802: [P150] RF GW: UPDATE by PLUGIN_READ 311496840: [P154] DUCO Ext. CO2 Sensor: start read, eventid:1 311496840: [P154] DUCO Ext. CO2 Sensor: Read external CO2 sensor. 311496840: [P154] DUCO Ext. CO2 Sensor: Start read external sensor. NodeAddress: 3. Type: CO2 311496987: [P151] DUCO SER GW: Serial port in use, set flag to read data later. 311497177: [P154] DUCO Ext. CO2 Sensor: Command confirmed by ducobox 311497177: [P154] DUCO Ext. CO2 Sensor: End of message received. 311497177: [P154] DUCO Ext. CO2 Sensor: Stop reading from serial 311497734: [P151] DUCO SER GW: Start readNetworkList 311497886: [P151] DUCO SER GW: Received correct response on network 311497900: [P151] DUCO SER GW: Send command successfull! 311497926: [P151] DUCO SER GW: Ducobox row found! 311497927: [P151] DUCO SER GW: New Ventilationmode value: 1 311497927: [P151] DUCO SER GW: New Countdown value: 1800 311497928: [P151] DUCO SER GW: New Ventilation_Percentage value: 20 311497928: [P151] DUCO SER GW: New Current_Fan_Value value: 11 ```
arnemauer commented 1 year ago

The RF-plugin doesn't receive an answer from the Ducobox. If you change the ventilation mode by pressing the blue buttons in Espeasy is the ducobox responding/changing ventilation speed?

Jozziej commented 1 year ago

When pressing the blue buttons in Espeasy the Duco is responding correctly, Duco_VentilationMode is showing the right value after a few seconds. But the Ventilation_gateway_RF plugin Ventilationmode stays on Automatic all the time.

SkyThes commented 1 year ago

Received my Ventilation Gateway today by mail and I have exact the same issue. Clicking the blue buttons in espeasy does change the modes but Ventilationmode of the RF gateway stays on Automatic.

Log: 546509: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 546509: [P150] RF GW: 1 - Bytes:14; Counter:15; RSSI:-59 (0x1F); LQI: 0x30 546509: [P150] RF GW: 2 - 30,00,40,00,05, 546509: [P150] RF GW: 3 - Received messagetype: Normal message 546509: [P150] RF GW: 4 - Received messagetype: Normal message 548031: [P150] RF GW: 2 - 20,00,12,86, 548331: HTTP: VENTMODE,LOW 548334: Command: VENTMODE 548335: [P150] RF GW: Sent command 'VENTMODE low' to DUCO unit 548342: [P150] RF GW: 0 - requestVentilationMode(); 548342: [P150] RF GW: 1 - sendVentilationModeMessage(); 548342: [P150] RF GW: 2 - SENT message (outboxQ 0): SRC:2; DEST:1; ORG.SRC:2; ORG.DEST:1; Ntwrk:0010e899;Type: 7; 548342: [P150] RF GW: 3 - Bytes:18; Counter:7; WaitForAck: 1; 548342: [P150] RF GW: 4 - 00,07,00,10,E8,99,10,44,17,00,60,00,22,00,0C,6E,00,09, 548343: [P150] RF GW: 5 - Start waiting for ack... 548374: [P150] RF GW: 548348 - 548374 = 26 548374: [P150] RF GW: rxBYTES: 38 (hex) 56 (dec); getMarcState 0D 548376: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:3; DEST:1; ORG.SRC:3; ORG.DEST:1; Ntwrk:0010e899;Type: 6; 548376: [P150] RF GW: 1 - Bytes:9; Counter:1; RSSI:-96 (0xD4); LQI: 0x31 548376: [P150] RF GW: 2 - 548660: [P150] RF GW: 0 - CheckforAck: check if 300ms is verstreken 548660: [P150] RF GW: 1 - CheckforAck: still waiting for ACK. Sending message again... 548661: [P150] RF GW: 2 - SENT message (outboxQ 0): SRC:2; DEST:1; ORG.SRC:2; ORG.DEST:1; Ntwrk:0010e899;Type: 7; 548661: [P150] RF GW: 3 - Bytes:18; Counter:7; WaitForAck: 1; 548661: [P150] RF GW: 4 - 00,07,00,10,E8,99,10,44,17,00,60,00,22,00,0C,6E,00,09, 548661: [P150] RF GW: 5 - Start waiting for ack... 548673: [P150] RF GW: 548666 - 548673 = 7 548674: [P150] RF GW: rxBYTES: 41 (hex) 65 (dec); getMarcState 11 548675: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 548675: [P150] RF GW: 1 - Bytes:13; Counter:2; RSSI:-59 (0x1F); LQI: 0x2E 548675: [P150] RF GW: 2 - 20,00,52,01, 548675: [P150] RF GW: 3 - Received messagetype: Normal message 548675: [P150] RF GW: 4 - Received messagetype: Normal message 548725: [P150] RF GW: RX FIFO OVERFLOW -> idle, flush RX FIFO and switch to RX state. 548988: [P150] RF GW: 6 - Received ACK for message outboxQ 0 we've sent. 549325: [P150] RF GW: 549318 - 549325 = 7 549326: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 549327: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 549327: [P150] RF GW: 1 - Bytes:14; Counter:3; RSSI:-59 (0x1F); LQI: 0x2E 549327: [P150] RF GW: 2 - 30,00,40,00,05, 549327: [P150] RF GW: 3 - Received messagetype: Normal message 549327: [P150] RF GW: 4 - Received messagetype: Normal message 549645: [P150] RF GW: 549639 - 549645 = 6 549646: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 549647: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 549647: [P150] RF GW: 1 - Bytes:14; Counter:3; RSSI:-58 (0x20); LQI: 0x2F 549647: [P150] RF GW: 2 - 30,00,40,00,05, 549648: [P150] RF GW: 3 - Received messagetype: Normal message 549648: [P150] RF GW: 4 - Received messagetype: Normal message 549977: [P150] RF GW: 549962 - 549976 = 14 549977: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 549979: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 549979: [P150] RF GW: 1 - Bytes:14; Counter:3; RSSI:-59 (0x1F); LQI: 0x2D 549979: [P150] RF GW: 2 - 30,00,40,00,05, 549979: [P150] RF GW: 3 - Received messagetype: Normal message 549979: [P150] RF GW: 4 - Received messagetype: Normal message 550715: [P150] RF GW: UPDATE by PLUGIN_READ 550930: [P150] RF GW: 550928 - 550930 = 2 550931: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 550932: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 550932: [P150] RF GW: 1 - Bytes:14; Counter:4; RSSI:-58 (0x20); LQI: 0x2E 550932: [P150] RF GW: 2 - 30,00,40,00,05, 550932: [P150] RF GW: 3 - Received messagetype: Normal message 550933: [P150] RF GW: 4 - Received messagetype: Normal message 551270: [P150] RF GW: 551250 - 551270 = 20 551271: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 551272: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 551272: [P150] RF GW: 1 - Bytes:14; Counter:4; RSSI:-59 (0x1F); LQI: 0x2A 551272: [P150] RF GW: 2 - 30,00,40,00,05, 551272: [P150] RF GW: 3 - Received messagetype: Normal message 551272: [P150] RF GW: 4 - Received messagetype: Normal message 551960: [P150] RF GW: 4 - Received messagetype: Normal message 552217: [P150] RF GW: 552216 - 552217 = 1 552218: [P150] RF GW: rxBYTES: 10 (hex) 16 (dec); getMarcState 0D 552219: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 552219: [P150] RF GW: 1 - Bytes:13; Counter:5; RSSI:-59 (0x1F); LQI: 0x2D 552219: [P150] RF GW: 2 - 20,00,12,84, 552219: [P150] RF GW: 3 - Received messagetype: Normal message 552219: [P150] RF GW: 4 - Received messagetype: Normal message 552557: [P150] RF GW: 552538 - 552557 = 19 552558: [P150] RF GW: rxBYTES: 10 (hex) 16 (dec); getMarcState 0D 552559: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 552559: [P150] RF GW: 1 - Bytes:13; Counter:5; RSSI:-58 (0x20); LQI: 0x2F 552559: [P150] RF GW: 2 - 20,00,12,84, 552559: [P150] RF GW: 3 - Received messagetype: Normal message 552559: [P150] RF GW: 4 - Received messagetype: Normal message 553197: [P150] RF GW: 553183 - 553197 = 14 553198: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 553199: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 553199: [P150] RF GW: 1 - Bytes:14; Counter:6; RSSI:-59 (0x1F); LQI: 0x2D 553199: [P150] RF GW: 2 - 30,00,40,00,05, 553199: [P150] RF GW: 3 - Received messagetype: Normal message 553199: [P150] RF GW: 4 - Received messagetype: Normal message 553558: [P150] RF GW: 4 - Received messagetype: Normal message 553835: [P150] RF GW: 553827 - 553835 = 8 553836: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 553837: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 553837: [P150] RF GW: 1 - Bytes:14; Counter:6; RSSI:-58 (0x20); LQI: 0x2B 553837: [P150] RF GW: 2 - 30,00,40,00,05, 553838: [P150] RF GW: 3 - Received messagetype: Normal message 553838: [P150] RF GW: 4 - Received messagetype: Normal message 554475: [P150] RF GW: 554471 - 554475 = 4 554476: [P150] RF GW: rxBYTES: 10 (hex) 16 (dec); getMarcState 0D 554477: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 554477: [P150] RF GW: 1 - Bytes:13; Counter:7; RSSI:-58 (0x20); LQI: 0x2E 554477: [P150] RF GW: 2 - 20,00,12,84, 554477: [P150] RF GW: 3 - Received messagetype: Normal message 554477: [P150] RF GW: 4 - Received messagetype: Normal message 554795: [P150] RF GW: 554793 - 554795 = 2 554796: [P150] RF GW: rxBYTES: 10 (hex) 16 (dec); getMarcState 0D 554797: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 554797: [P150] RF GW: 1 - Bytes:13; Counter:7; RSSI:-58 (0x20); LQI: 0x2C 554797: [P150] RF GW: 2 - 20,00,12,84, 554797: [P150] RF GW: 3 - Received messagetype: Normal message 554797: [P150] RF GW: 4 - Received messagetype: Normal message 555129: [P150] RF GW: 555115 - 555128 = 13 555129: [P150] RF GW: rxBYTES: 10 (hex) 16 (dec); getMarcState 0D 555131: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 555131: [P150] RF GW: 1 - Bytes:13; Counter:7; RSSI:-59 (0x1F); LQI: 0x2F 555131: [P150] RF GW: 2 - 20,00,12,84, 555131: [P150] RF GW: 3 - Received messagetype: Normal message 555131: [P150] RF GW: 4 - Received messagetype: Normal message 555766: [P150] RF GW: 4 - Received messagetype: Normal message 556083: [P150] RF GW: 556081 - 556083 = 2 556084: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 556085: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 556085: [P150] RF GW: 1 - Bytes:14; Counter:8; RSSI:-58 (0x20); LQI: 0x30 556085: [P150] RF GW: 2 - 30,00,40,00,05, 556085: [P150] RF GW: 3 - Received messagetype: Normal message 556085: [P150] RF GW: 4 - Received messagetype: Normal message 556423: [P150] RF GW: 556403 - 556423 = 20 556424: [P150] RF GW: rxBYTES: 11 (hex) 17 (dec); getMarcState 0D 556425: [P150] RF GW: 0 - RECEIVED message (inboxQ 0): SRC:1; DEST:2; ORG.SRC:1; ORG.DEST:2; Ntwrk:0010e899;Type: 7; 556425: [P150] RF GW: 1 - Bytes:14; Counter:8; RSSI:-58 (0x20); LQI: 0x2E 556425: [P150] RF GW: 2 - 30,00,40,00,05, 556425: [P150] RF GW: 3 - Received messagetype: Normal message 556425: [P150] RF GW: 4 - Received messagetype: Normal message

arnemauer commented 1 year ago

What is the distance between the gateway and your ducobox? The gateway isn't receiving any rf message from the ducobox....