search

artisan-roaster-scope / artisan

artisan: visual scope for coffee roasters
https://artisan-scope.org
GNU General Public License v3.0
940 stars 254 forks source link

ET not detected #656

Closed cbc1121 closed 3 years ago

cbc1121 commented 3 years ago

ET not detected

To Reproduce Steps to reproduce the behavior:

  1. Go to '...'
  2. Click on '....'
  3. Scroll down to '....'
  4. See error

Expected behavior A clear and concise description of what you expected to happen.

Screenshots If applicable, add screenshots to help explain your problem. IMG_8867

Setup (please complete the following information):

Additional context Add any other context about the problem here.

Please attach your current Artisan settings file (as exported via menu Help >> Save Settings as .aset) file. Please attach any relevant Artisan .alog profiles. artisan-settings.aset.zip

Note that you need either add a .txt extension or zip the files before uploading. Otherwise you will receive a "Not a supported file type" error on uploading.

roasterdave commented 3 years ago

@cbc1121 It is not possible to help when you provide no information. Please update with the information requested in the issue form above.

cbc1121 commented 3 years ago

@cbc1121 It is not possible to help when you provide no information. Please update with the information requested in the issue form above.

hi dave, I edited my post :)

MAKOMO commented 3 years ago

You seem to have a Santoker BT USB (eg. R3) machine which communicates via USB using the Center 301 protocol. However, for some reasons you have a mixed setup which blends a MODBUS extra device in.

To fix:

1) menu Config >> Device, 2nd tab "Extra Devices", press Reset to remove that one extra device 2) menu Config >> Device, 3rd tab "Symb ET/BT", remove the "Y3" from the "ET Y(x)" field 3) menu Config >> Port, 3rd tab "MODBUS", set all Slave IDs in the first row of the table to 0

cbc1121 commented 3 years ago

Thanks Marco. Problem solve 🤟🏾

Sent from my iPhone

On 6 Aug 2021, at 8:52 PM, Marko Luther @.***> wrote:

 You seem to have a Santoker BT USB (eg. R3) machine which communicates via USB using the Center 301 protocol. However, for some reasons you have a mixed setup which blends a MODBUS extra device in.

To fix:

menu Config >> Device, 2nd tab "Extra Devices", press Reset to remove that one extra device menu Config >> Device, 3rd tab "Symb ET/BT", remove the "Y3" from the "ET Y(x)" field menu Config >> Port, 3rd tab "MODBUS", set all Slave IDs in the first row of the table to 0 — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.

roasterdave commented 3 years ago

Excellent!

cbc1121 commented 3 years ago

Hi,

My artisan go something off again. When I’m not roasting. The BT difference number keep going up and down.

Here video when I’m not roasting

Sent from my iPhone

On 7 Aug 2021, at 10:47 AM, Dave Baxter @.***> wrote:

 Excellent!

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe. Triage notifications on the go with GitHub Mobile for iOS or Android.