search

arturo182 / bbq10kbd_breakout

81 stars 10 forks source link

Make compatible with kitspace.org #3

Closed kasbah closed 4 years ago

kasbah commented 4 years ago

Hey, I added the files necessary to add your project on kitspace.org. Here is a preview of what it will look like. If you are happy to add it, just merge these changes. If added the Kitspace page will stay in sync with the Github repo (with a max delay of 24hrs).

This BOM is quite simple, but if you like the idea of adding your projects I could take a look at a more complicated one where the 1-click-BOM functionality will be more worth it.

arturo182 commented 4 years ago

Hmm, I thought the BOM was wrong cause it says 100uF but it's actually the schematic that is wrong, it should be 100nF = 0.1uF. Could you change that in the BOM so someone doesn't buy the wrong one? I will update in the design too.

kasbah commented 4 years ago

Sure, I was confused about that too. I made the changes and also found some SKUs for the headers.

The BOM was made by importing the kicad_pcb directly into the BOM Builder. I also have some kicad scripts that could generate something similar from the sch if all the info is in there. After that you could use KiField to keep everything in sync, but it's probably overkill for these 3 line items :)

arturo182 commented 4 years ago

Thank you :)

kasbah commented 4 years ago

It's up! https://kitspace.org/boards/github.com/arturo182/bbq10kbd_breakout/