Open pawel37 opened 1 month ago
I should change it to 24V, a 24V Meanwell PSU is not expensive ;-)
So the steppermotor too or they work with 24 vlots
On Sat, 18 May 2024, 19:17 askmurphy, @.***> wrote:
I should change it to 24V, a 24V Meanwell PSU is not expensive ;-)
— Reply to this email directly, view it on GitHub https://github.com/askmurphy/My-extreme-modded-Craftbot-3D-printer/issues/3#issuecomment-2118730894, or unsubscribe https://github.com/notifications/unsubscribe-auth/AENFQ2MVFLT4U2KFWFFXX3DZC4MDFAVCNFSM6AAAAABH5AVZRGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJYG4ZTAOBZGQ . You are receiving this because you authored the thread.Message ID: <askmurphy/My-extreme-modded-Craftbot-3D-printer/issues/3/2118730894@ github.com>
Steppermotors are powered via the stepperdrivers, so you can use them. With 24V your current is lower, safer 😀
Check this: https://youtu.be/KM-5PYfRlso?si=oHFSL8abmyR35G41
what the pi for cant i just use usb to connect pi so i can use octo print or not thanks
i900032@gmial.com email me pls
Dp you have a new 3D-printer board already?
If not: there are better boards available now.
Not yet thanks .
On Sun, 19 May 2024, 02:44 askmurphy, @.***> wrote:
Dp you have a new 3D-printer board already?
If not: there are better boards available now.
— Reply to this email directly, view it on GitHub https://github.com/askmurphy/My-extreme-modded-Craftbot-3D-printer/issues/3#issuecomment-2118876733, or unsubscribe https://github.com/notifications/unsubscribe-auth/AENFQ2KELTCMXKHBPD76IP3ZC6ANJAVCNFSM6AAAAABH5AVZRGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJYHA3TMNZTGM . You are receiving this because you authored the thread.Message ID: <askmurphy/My-extreme-modded-Craftbot-3D-printer/issues/3/2118876733@ github.com>
Maybe you can join discord:
Nice board:
€42,42 | Mellow Gloomy Fly Rrf E3 Pro V3.0 Wifi 1.6 M/s 32Bit controller board TMC2209 https://a.aliexpress.com/_Ezmzl11
This is board has more options:
Mellow High-Speed Super♾️ Pro Board 3 + 5 Hv 8 As 32Bit 550Mhz 2Oz Pcb for Uart Spi 3D Printer rrf/Klipper support Canbus https://a.aliexpress.com/_EzsHsh5
I used the first board in my Ender5, I bought 2 of the second board but not used yet.
i have the first one 12 volts and the ribbon one craftbot plus so cant with the ribbon one do i need to change to 24 volts or not