search

assembly12 / Foxess-T-series-ESPHome-Home-Assistant

Read out Foxess T-Series Inverter to Home Assistant by using ESPHome
34 stars 7 forks source link

Mixed data reading #23

Open viteq1983 opened 8 months ago

viteq1983 commented 8 months ago

Hi. I connected to the T3 inverter according to this manual. I receive the data but it is somehow mixed up, e.g. frequency appears under T-Series Grid Current S as a value 500,2. The value of T-Series Today Yield and T-Series Generation Total is decreasing. I have connected only the ground pin rs485 to TTL module with ground pin from foxess inverter, ESP is powered from usb charger. What can the problem ?

Danielxyz123 commented 8 months ago

Hi, which firmware are you using?

giedriuskilcauskas commented 8 months ago

@viteq1983, there were such issues after FW update to 1.21 or so. Here was some discussion https://github.com/assembly12/Foxess-T-series-ESPHome-Home-Assistant/issues/15 but I think the changes never ended up in main branch