search

astrandb / miele

A modern integration for Miele devices in Home Assistant
MIT License
192 stars 29 forks source link

Bug in water consumption #338

Open FreakyPady opened 11 months ago

FreakyPady commented 11 months ago

The problem

I got a Miele WWR860WPS since a few months. With your integration, i successfully integrated the machine into home assistant.

For monitoring the water consumption of the washing machine, i tried to create a helper from type utility meter. Sadly it doesn't work correctly. The helper counts correct during the washing, but at the start-moment of the washing machine, i found an bug:

miele_wasser

At the start (time 05:50): There is a small peak (needle) of 30L! Before and after the peak, it goes down to zero! Btw: 30L is the complete water consumption of the washing run before! Then water consumption increase until 8:30 (end of this run) -> OK. After that, i startet a second washing run at 8:39. As you can see: Here comes also a small short needle with the height of the washing run before (74L). Afterwards water consumption starts increasing from zero -> OK

Because of that, my utility meter helper is not working. He also counts the peaks as a consumption.

Is there any way to fix this or is it just fixable by Miele?

Version of miele integration having the issue?

v0.1.15

Version of Home Assistant Core having the issue?

2023.9.2

Anything in the logs that might be useful for us?

No response

Additional information

No response

xoration commented 5 months ago

I have the same issues with two different appliances for water and power consumption (dishwasher and washing machine).

mistergyle commented 4 months ago

same here - power consumtion entity not working for two devices (dryer, washing machine)

bipsendk commented 2 weeks ago

Same issue here with a G7113 dishwasher....

Apparently my peak is there for about 10 seconds, before dropping to 0 again - and then the "real" consumption starts to show up..

image

This is with integration build 2024.8.1