Problem with huawei E1550

[GoogleCodeExporter]

Hi,

I try to test Huawei E1550. In my Asterisk PBX i have 2 E1550.
All is made according instructions.

One of my card:
 -------------- Status -------------
  Device                  : GSM1
  State                   : Free
  Audio                   : /dev/ttyUSB1
  Data                    : /dev/ttyUSB2
  Voice                   : Yes
  SMS                     : Yes
  Manufacturer            : huawei
  Model                   : E1550
  Firmware                : 11.609.20.00.00
  IMEI                    : 353443046139759
  IMSI                    : 260060093794644
  GSM Registration Status : Registered, home network
  RSSI                    : 12, -118 dBm
  Mode                    : No Service
  Submode                 : No service
  Provider Name           : PLAY
  Location area code      : 0B
  Cell ID                 : 4DB3
  Subscriber Number       : +48792593125
  SMS Service Center      : +48790998250
  Use UCS-2 encoding      : Yes
  USSD use 7 bit encoding : Yes
  USSD use UCS-2 decoding : No
  Tasks in queue          : 0
  Commands in queue       : 0
  Call Waiting            : Disabled
  Current device state    : start
  Desired device state    : start
  When change state       : now
  Calls/Channels          : 0

When I call the GSM number is asterisk does not see the connection.
I did a test and exchanged E1550 to E173 and then everything works fine on both 
cards.

Has anyone had similar problems with the E1550?

I use: chan_dongle: Huawei 3G Dongle Channel Driver, Version 1.1, Revision 14

Best regards,

Daniel

Original issue reported on code.google.com by daniel.w...@gmail.com on 27 Apr 2013 at 4:48

[GoogleCodeExporter]

11.609.18.00.00 and some other firmware works good, 
i not test 11.609.20.00.00 for E1550.

Also i not understand, whats your named 'the connection' ?

Original comment by bg_...@mail.ru on 15 May 2013 at 7:42

[GoogleCodeExporter]

Original comment by bg_...@mail.ru on 30 Jul 2013 at 7:41

• Changed state: Accepted