search

audiohacked / OpenCorsairLink

Linux and Mac OS support for the CorsairLink Devices
GNU General Public License v2.0
706 stars 125 forks source link

Unsupported Generic LED Function with Lighting Node PRO + Suuport for it? #225

Open kalinda99 opened 4 years ago

kalinda99 commented 4 years ago

I don't know if this counts as a bug or not since the hardware I'm using isn't on the supported list but OpenCorsairLink does detect my Lighting Node Pro, maybe because it's similar to the Commander Pro? The only difference between them, as far as I know, is that the Lighting can't control fan RPM, it's just for the pretty RGB.

Anyway, I'd love to see support added for the Lighting Node Pro if there is none. I'd be happy to do testing or get whatever info would be needed for it.

Describe the bug When I execute the command sudo OpenCorsairLink --dev=1 --led channel=2,mode=4,colors=00FF00, I get Unsupported Generic LED Function at the end. Here's the full output:

`Dev=0, CorsairLink Device Found: H100i Pro! Dev=1, CorsairLink Device Found: Lighting Node PRO!

Vendor: Corsair Product: Lighting Node PRO Firmware: V0.0.0 Temperature 0: 0.00 C Temperature 1: 0.00 C Temperature 2: 0.00 C Temperature 3: 0.00 C Output 12v: 0.00 V Output 5v: 0.00 V Output 3.3v: 0.00 V Fan 0: Mode: Auto/Disconnected PWM: 0% RPM: 0 Fan 1: Mode: Unknown PWM: 0% RPM: 0 Fan 2: Mode: Unknown PWM: 0% RPM: 0 Fan 3: Mode: Unknown PWM: 0% RPM: 0 Fan 4: Mode: Unknown PWM: 0% RPM: 0 Fan 5: Mode: Unknown PWM: 0% RPM: 0 Unsupported Generic LED Function`

It detects all six of my fans, though it doesn't talk to them, or maybe it's just detecting that the device supports six fans.

Expected behavior To control my lights just like I can with my H100i. Maybe I'm doing it wrong? I tried several different modes and combos and I just get that error.

Desktop:

audiohacked commented 4 years ago

LED protocol for the Lighting Node Pro (and the Commander Pro) isn't fully mapped yet.

aleczk commented 4 years ago

I was going to ask a similar question, I guess... The error message is a bit different. I'm a newbie in Linux and I made a mistake of buying 6 freaking LL fans which have RGB with it even tho I keep them black (no color) on windows.

I can see that it's recognizing the fans that are attached to the CoPro and the RPM of it unlike the creator of this topic.

aleczk@Aleczk:~/Downloads/OpenCorsairLink-testing$ sudo ./OpenCorsairLink.elf
Dev=0, CorsairLink Device Found: HX750i!
Dev=1, CorsairLink Device Found: Commander PRO!

aleczk@Aleczk:~/Downloads/OpenCorsairLink-testing$ sudo ./OpenCorsairLink.elf --device 1 --led channel=0, mode=2, colors=00FF00
Dev=0, CorsairLink Device Found: HX750i!
Dev=1, CorsairLink Device Found: Commander PRO!

Vendor: Corsair
Product: Commander PRO
Firmware: V0.9.212
Temperature 0:  0.00 C
Temperature 1:  0.00 C
Temperature 2:  0.00 C
Temperature 3:  0.00 C
Output 12v: 11.88 V
Output 5v:  4.98 V
Output 3.3v:  3.33 V
Fan 0:  Mode: Auto/Disconnected
    PWM: 0%
    RPM: 0
Fan 1:  Mode: Auto/Disconnected
    PWM: 0%
    RPM: 1429
Fan 2:  Mode: Auto/Disconnected
    PWM: 0%
    RPM: 1339
Fan 3:  Mode: Auto/Disconnected
    PWM: 0%
    RPM: 1490
Fan 4:  Mode: Auto/Disconnected
    PWM: 0%
    RPM: 1496
Fan 5:  Mode: Auto/Disconnected
    PWM: 0%
    RPM: 1490
Unsupported LED Function

Also I guess I screwed up the installation, kinda hard for me.

BeardedDevCo commented 4 years ago

Di you manage to get anywhere with this @audiohacked ? Running elementaryOS 5.1 am in the testing branch but the LED side of the commander pro doesnt seem to be getting recognised

sudo ./OpenCorsairLink.elf --dev=0 --led channel=2,mode=0,colors=00FF00 Dev=0, CorsairLink Device Found: Commander PRO!

Vendor: Corsair Product: Commander PRO Firmware: V0.9.212 Temperature 0: 30.01 C Temperature 1: 40.59 C Temperature 2: 30.13 C Temperature 3: 0.00 C Output 12v: 12.14 V Output 5v: 4.92 V Output 3.3v: 0.66 V Fan 0: Mode: Auto/Disconnected PWM: 50% RPM: 0 Fan 1: Mode: Auto/Disconnected PWM: 50% RPM: 0 Fan 2: Mode: Auto/Disconnected PWM: 50% RPM: 0 Fan 3: Mode: Auto/Disconnected PWM: 50% RPM: 0 Fan 4: Mode: Auto/Disconnected PWM: 50% RPM: 0 Fan 5: Mode: Auto/Disconnected PWM: 50% RPM: 0 Unsupported LED Function

Solarer commented 4 years ago

I can confirm the observation of @kalinda99 and @BeardedDevCo. I have the Lightning Node Pro connected to my Commander Pro and the output is the same. Since development is moving to liquidctl it is likely that we will get the feature there. If I have some spare time I might have a look at it. For now you can also try to use OpenRGB for the LEDs and OCL for fan speed.