search

australiangeomechanics / agsformat

AGS 4.1.x AU 1.x
3 stars 1 forks source link

LUCT_STAB and LUCT_STYP #65

Open SolidRockProgrammer opened 2 years ago

SolidRockProgrammer commented 2 years ago

Discussed in https://github.com/australiangeomechanics/agsformat/discussions/43

Originally posted by **m-sams-artc** June 2, 2022 Does the current ags format (with or without AU localisation) support unconfined compressive strength (UCS) test results on soils - typically after stabilisation? It is relatively common in projects to stabilise soils (with lime, cement, flyash, polymer products) and usually UCS tests are done to demonstrate strength gain. Would like a way to have this in gINT, and be able to transfer data in an ags file. Should be columns for stabiliser, dosage, curing time, curing environment, UCS or others as deemed suitable.
SolidRockProgrammer commented 2 years ago

There is a Soil UCS group in AGS 4.1.1 - LUCT one could add custom headings like these from CMPG (and many other groups) LUCT_STAB % 2SF Amount of stabiliser added LUCT_STYP X Type of stabiliser added

StephenDurham commented 2 years ago

Hi Phil, I think the UK intended the information to be free text in SPEC_PREP, however I agree we should have a field like we have in CBRG for STAB and STYP as the preparation requirements are broadly similar. We may even want to include reference to a preparation method, I know that a few of the state road standards have references to stabilised materials.

On Mon, 12 Sept 2022 at 20:12, Phil Wade @.***> wrote:

Assigned #65 https://github.com/australiangeomechanics/agsformat/issues/65 to @StephenDurham https://github.com/StephenDurham.

— Reply to this email directly, view it on GitHub https://github.com/australiangeomechanics/agsformat/issues/65#event-7366039858, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVEHTIMYDNTZYVDY2GDLMRTV536YNANCNFSM6AAAAAAQKJ5XZM . You are receiving this because you were assigned.Message ID: @.*** com>