Hi!
I ran into some memory corruption while trying to add a second controller by using my multi usb adapter.
I unpluged and repluged my controllers a few times while playing and everything was running smooth.
When i came to make a image save state in one of my 4 slots, autobleem was bringing me back to its sync menu and re scanning my games. after the sync done i only had the OG 20 games.
SOLUTION
Unplug all from the console wait 30 seconds. Re-plug all but the usb that contains the autobleem.
Power on the console with all pluged in except the USB that contains autobleem and roms, once the console is fully working to its original state. Shut it down and take off the power cord for 10 seconds or so.
Next insert the USB that contains autobleem and roms before adding the power cable
Next plug the power cable and power back on the console.
Scan games from autobleem. the roms should appear and the memory corruption will be gone.
Hi! I ran into some memory corruption while trying to add a second controller by using my multi usb adapter. I unpluged and repluged my controllers a few times while playing and everything was running smooth.
When i came to make a image save state in one of my 4 slots, autobleem was bringing me back to its sync menu and re scanning my games. after the sync done i only had the OG 20 games.
SOLUTION
Hope this helps!