Closed vinodkumar1947 closed 8 years ago
Hi Vinod ,
We did check the relay code before a day.. and found fine .. You can refer the examples code : /hello-world.c where we have tested it .. We verified the same by o/p displayed by relay driver program on gtkterm .. Lets discuss more when we meet.
Thanks Manoj Sony
On Thu, Sep 10, 2015 at 10:36 AM, vinodkumar1947 notifications@github.com wrote:
Hi manoj,
the relay driver is not switching the PIN DIO3. Voltage remains almost constant at the PIN. Please look into the issue
— Reply to this email directly or view it on GitHub https://github.com/automote/contiki/issues/1.
Regards, Manoj Sony, Mob : +91-9886 888 101
@manojsony,
Did you check the voltage on the PIN. The code is working fine but the voltage is hovering from 2.8 to 3.2V
@vinodkumar1947 @lovelesh : Guys now its been verified and fixed ..please close the bug.
Thanks @manojsony . I will close this bug.
Hi manoj,
the relay driver is not switching the PIN DIO3. Voltage remains almost constant at the PIN. Please look into the issue