Wave your hand in front of each HC-SR501 motion sensor and confirm that they detect motion by observing changes in the Serial Monitor.
[x] #58
Check the temperature readings from each TMP102 sensor in the Serial Monitor. Ensure they respond appropriately to changes in ambient temperature.
[x] #59
If you have additional components (e.g., LCD display, relay module), test their functionality by uploading and running test sketches.
[x] #60
If any component is not working as expected, double-check wiring, library installations, and sensor configurations. Refer to datasheets and documentation for troubleshooting.
With these adjustments, you'll have the initial hardware setup ready for monitoring three rooms in your home temperature and motion climate controller project. You can proceed to integrate and test these components together in the next steps of your project.
awarbler
commented
5 months ago
Testing Individual Components
[x] ** Test Arduino
[x] #57
[x] #58
[x] #59
[x] #60
With these adjustments, you'll have the initial hardware setup ready for monitoring three rooms in your home temperature and motion climate controller project. You can proceed to integrate and test these components together in the next steps of your project.