Integrate all components

[awarbler]

integrate all components step by step with code. The components include the Arduino UNO R4 WiFi board, PIR Motion Sensors (HC-SR501), Temperature Sensors (TMP102 or DHT22) incorporate WiFi capabilities and send data Nest

• [ ] Step 1: Initial Setup

Connect the components to the Arduino UNO R4 WiFi board:

• Connect the motion sensor to a digital input pin (e.g., pin 2).
• Connect the relay module to a digital output pin (e.g., pin 7).
• Connect the temperature sensor (TMP102 or DHT22) to the appropriate pins.

Step 2: Arduino Code - Part 1

• [x] Step 3: Obtain WiFi Credentials for nest

• [x] 1. WiFi Credentials:

  • Connect your computer or mobile device to the WiFi network that you want your Arduino to connect to.
  • Log in to your router's web interface and retrieve the WiFi SSID and Password.

• [x] 2. Nest API Key:

  • Create a new channel and obtain the Write API Key from the API Keys tab.

• [x] ### Step 4: Update Arduino Code - Part 2

• Replace "YourWiFiSSID" and "YourWiFiPassword" with your WiFi credentials.

• Replace "YourThingSpeakAPIKey" with the obtained Write API Key.

[awarbler]

Need to adjust because we are no longer using a relay