search

awawa-dev / HyperHDR

Highly optimized open source ambient lighting implementation based on modern digital video and audio stream analysis for Windows, macOS and Linux (x86 and Raspberry Pi / ARM).
http://www.hyperhdr.eu/
MIT License
1.13k stars 117 forks source link

Color Calibration #941

Closed 8L12 closed 1 month ago

8L12 commented 1 month ago

Bug report, debug log and your config file (FULL LOGS ARE MANDATORY)

2024-09-19T19:02:47.760Z [HYPERHDR0] New priority[1], previous [240] 2024-09-19T19:02:47.760Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-09-19T19:02:57.109Z [MUXER0] Removed source priority 1 2024-09-19T19:02:57.109Z [MUXER0] Set visible priority to 240 2024-09-19T19:02:57.109Z [HYPERHDR0] New priority[240], previous [1] 2024-09-19T19:02:57.109Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 1 2024-09-19T19:02:57.122Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 17ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 51.08, processed = 3183], [LED0: FPS = 50.35, send = 3138, processed = 3138, dropped = 527] 2024-09-19T19:02:57.588Z [HYPERHDR0] New RGB order is: grb 2024-09-19T19:02:57.607Z [IMAGETOLED_MNG0] Total index number is: 32376 (memory: 32376). User sparse processing is: enabled, image size: 800 x 600, area number: 284 2024-09-19T19:02:57.608Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:02:57.608Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:02:57.608Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:02:57.608Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:02:57.608Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:02:57.608Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:02:57.631Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:02:57.632Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:02:57.632Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":false,"leds":280,"pwmchannel":0,"refreshTime":20,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}] 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:02:57.633Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:02:57.634Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:02:57.634Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:02:57.634Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:02:57.652Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:02:57.652Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 17ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 51.08, processed = 3183] 2024-09-19T19:02:57.653Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:02:57.785Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-09-19T19:03:54.795Z [V4L2:USB2 VIDEO: US] Video cache: size: 3, hits: 3602, needed: 1, cleanup: 0, limit: 8 2024-09-19T19:04:40.300Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:04:53.885Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:04:54.798Z [V4L2:USB2 VIDEO: US] Video cache: size: 2, hits: 3602, needed: 1, cleanup: 0, limit: 8 2024-09-19T19:04:54.800Z [PERFORMANCE] [USB: FPS = 60.01, decoding = 16ms, frames = 3601, invalid = 0, mode = direct], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:04:54.804Z [PERFORMANCE] [USB: FPS = 60.01, decoding = 16ms, frames = 3601, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.99, processed = 3600], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:05:04.356Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}] 2024-09-19T19:05:54.800Z [PERFORMANCE] [USB: FPS = 60.05, decoding = 13ms, frames = 3603, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 58.82, send = 3529, processed = 3529, dropped = 0] 2024-09-19T19:05:54.800Z [V4L2:USB2 VIDEO: US] Video cache: size: 3, hits: 3602, needed: 1, cleanup: 0, limit: 8 2024-09-19T19:06:54.802Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 15ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:07:50.142Z [MUXER0] Register new input 'Web Configuration@2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c/COLOR' with priority 1 as inactive 2024-09-19T19:07:50.142Z [MUXER0] Priority 1 is now active 2024-09-19T19:07:50.143Z [MUXER0] Set visible priority to 1 2024-09-19T19:07:50.143Z [HYPERHDR0] New priority[1], previous [240] 2024-09-19T19:07:50.143Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-09-19T19:07:55.169Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 17ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 55.09, processed = 3325], [LED0: FPS = 54.12, send = 3267, processed = 3267, dropped = 282] 2024-09-19T19:07:56.484Z [MUXER0] Removed source priority 1 2024-09-19T19:07:56.484Z [MUXER0] Set visible priority to 240 2024-09-19T19:07:56.485Z [HYPERHDR0] New priority[240], previous [1] 2024-09-19T19:07:56.485Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 1 2024-09-19T19:08:54.800Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 11ms, frames = 3601, invalid = 0, mode = direct], [INSTANCE0: FPS = 58.73, processed = 3503], [LED0: FPS = 57.70, send = 3440, processed = 3440, dropped = 65] 2024-09-19T19:09:41.471Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:176) setSparseProcessing to 1 2024-09-19T19:09:41.471Z [CHANNEL_RED0] (ChannelCalibration.cpp:57) Target: [8, 98, 180, active], Correction: 255 2024-09-19T19:09:41.471Z [CHANNEL_GREEN0] (ChannelCalibration.cpp:57) Target: [5, 245, 5, active], Correction: 255 2024-09-19T19:09:41.471Z [CHANNEL_BLUE0] (ChannelCalibration.cpp:57) Target: [5, 5, 245, active], Correction: 255 2024-09-19T19:09:41.471Z [CHANNEL_CYAN0] (ChannelCalibration.cpp:57) Target: [5, 245, 245, active], Correction: 255 2024-09-19T19:09:41.471Z [CHANNEL_MAGENTA0] (ChannelCalibration.cpp:57) Target: [245, 5, 245, active], Correction: 255 2024-09-19T19:09:41.471Z [CHANNEL_YELLOW0] (ChannelCalibration.cpp:57) Target: [245, 245, 5, active], Correction: 255 2024-09-19T19:09:41.472Z [COLORSPACE_CALIBRATION0] classicMode: yes, gammas:[2.00, 2.00, 2.00], saturation: 1.00, luminance: 1.00, backLight: [enabled, threshold: 1, colored: no] 2024-09-19T19:09:41.472Z [LED_CALIBRATION0] (LedCalibration.cpp:101) Calibration config '0' for LED segment: [0, 283] 2024-09-19T19:09:41.472Z [LED_CALIBRATION0] (LedCalibration.cpp:96) LedCalibration is released 2024-09-19T19:09:54.804Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 10ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.80, processed = 3588], [LED0: FPS = 58.76, send = 3526, processed = 3526, dropped = 2] 2024-09-19T19:10:15.967Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:176) setSparseProcessing to 1 2024-09-19T19:10:15.967Z [CHANNEL_RED0] (ChannelCalibration.cpp:57) Target: [239, 0, 0, active], Correction: 255 2024-09-19T19:10:15.967Z [CHANNEL_GREEN0] (ChannelCalibration.cpp:57) Target: [5, 245, 5, active], Correction: 255 2024-09-19T19:10:15.967Z [CHANNEL_BLUE0] (ChannelCalibration.cpp:57) Target: [5, 5, 245, active], Correction: 255 2024-09-19T19:10:15.967Z [CHANNEL_CYAN0] (ChannelCalibration.cpp:57) Target: [5, 245, 245, active], Correction: 255 2024-09-19T19:10:15.967Z [CHANNEL_MAGENTA0] (ChannelCalibration.cpp:57) Target: [245, 5, 245, active], Correction: 255 2024-09-19T19:10:15.967Z [CHANNEL_YELLOW0] (ChannelCalibration.cpp:57) Target: [245, 245, 5, active], Correction: 255 2024-09-19T19:10:15.968Z [COLORSPACE_CALIBRATION0] classicMode: yes, gammas:[2.00, 2.00, 2.00], saturation: 1.00, luminance: 1.00, backLight: [enabled, threshold: 1, colored: no] 2024-09-19T19:10:15.968Z [LED_CALIBRATION0] (LedCalibration.cpp:101) Calibration config '0' for LED segment: [0, 283] 2024-09-19T19:10:15.968Z [LED_CALIBRATION0] (LedCalibration.cpp:96) LedCalibration is released 2024-09-19T19:10:18.009Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:10:54.794Z [V4L2:USB2 VIDEO: US] Video cache: size: 2, hits: 3583, needed: 1, cleanup: 0, limit: 8 2024-09-19T19:10:54.798Z [PERFORMANCE] [USB: FPS = 60.01, decoding = 14ms, frames = 3601, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.82, processed = 3589], [LED0: FPS = 58.77, send = 3526, processed = 3526, dropped = 1] 2024-09-19T19:11:29.562Z [V4L2:USB2 VIDEO: US] (V4L2Grabber.cpp:125) setHdrToneMappingMode to: Fullscreen 2024-09-19T19:11:29.562Z [V4L2:USB2 VIDEO: US] (V4L2Grabber.cpp:131) setHdrToneMappingMode replacing LUT and restarting 2024-09-19T19:11:29.568Z [V4L2:USB2 VIDEO: US] (V4L2Grabber.cpp:105) LUT folder location: '/usr/share/hyperhdr/lut' 2024-09-19T19:11:29.568Z [V4L2:USB2 VIDEO: US] (Grabber.cpp:458) LUT file found: /.hyperhdr/lut_lin_tables.3d 2024-09-19T19:11:29.568Z [V4L2:USB2 VIDEO: US] (Grabber.cpp:468) Index 1 for HDR YUV 2024-09-19T19:11:30.417Z [MUXER0] Priority 240 is now inactive 2024-09-19T19:11:30.417Z [MUXER0] Set visible priority to 255 2024-09-19T19:11:30.417Z [HYPERHDR0] New priority[255], previous [240] 2024-09-19T19:11:30.417Z [HYPERHDR0] No source left -> switch LED-Device off 2024-09-19T19:11:30.417Z [SMOOTHING0] Clearing queued colors before: disabling 2024-09-19T19:11:30.417Z [SMOOTHING0] Smoothing queue is cleared 2024-09-19T19:11:30.418Z [PERFORMANCE] [USB: FPS = 60.01, decoding = 14ms, frames = 3601, invalid = 0, mode = direct], [LED0: FPS = 58.77, send = 3526, processed = 3526, dropped = 1] 2024-09-19T19:11:30.417Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-09-19T19:11:30.418Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:11:30.418Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:11:30.418Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:11:30.418Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:11:30.418Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:11:30.441Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:11:30.442Z [PERFORMANCE] [USB: FPS = 60.01, decoding = 14ms, frames = 3601, invalid = 0, mode = direct] 2024-09-19T19:11:31.753Z [V4L2:USB2 VIDEO: US] Found and loaded LUT: '/.hyperhdr/lut_lin_tables.3d' 2024-09-19T19:11:31.753Z [COMPONENTCTRL0] HDR (global): enabled 2024-09-19T19:11:31.753Z [MUXER0] Priority 240 is now active 2024-09-19T19:11:31.753Z [MUXER0] Set visible priority to 240 2024-09-19T19:11:31.753Z [HYPERHDR0] New priority[240], previous [255] 2024-09-19T19:11:31.754Z [HYPERHDR0] New source available -> switch LED-Device on 2024-09-19T19:11:31.754Z [SMOOTHING0] Clearing queued colors before: enabling 2024-09-19T19:11:31.754Z [SMOOTHING0] Smoothing queue is cleared 2024-09-19T19:11:31.754Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 1 2024-09-19T19:11:31.754Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:11:31.758Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:11:31.758Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:11:31.758Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:11:31.758Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:11:31.760Z [SMOOTHING0] Using alternative smoothing input (0) 2024-09-19T19:11:31.793Z [SMOOTHING0] Using alternative smoothing procedure (0) 2024-09-19T19:11:41.357Z [COMPONENTCTRL0] Blackborder detector: enabled 2024-09-19T19:11:41.368Z [IMAGETOLED_MNG0] Total index number is: 32376 (memory: 32376). User sparse processing is: enabled, image size: 800 x 600, area number: 284 2024-09-19T19:11:54.796Z [PERFORMANCE] [USB: FPS = 57.88, decoding = 16ms, frames = 3473, invalid = 0, mode = direct], [INSTANCE0: FPS = 57.90, processed = 3474], [LED0: FPS = 56.81, send = 3409, processed = 3409, dropped = 119] 2024-09-19T19:11:54.795Z [V4L2:USB2 VIDEO: US] Video cache: size: 8, hits: 3452, needed: 1, cleanup: 0, limit: 8 2024-09-19T19:12:11.081Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:241) setBrightness: 100 2024-09-19T19:12:11.083Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:252) setBrightnessCompensation: 0 2024-09-19T19:12:11.085Z [CHANNEL_CYAN0] (ChannelCalibration.cpp:70) setAdjustment: [5, 245, 245, active] 2024-09-19T19:12:11.088Z [CHANNEL_MAGENTA0] (ChannelCalibration.cpp:70) setAdjustment: [245, 5, 245, active] 2024-09-19T19:12:11.091Z [CHANNEL_BLUE0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:11.092Z [CHANNEL_GREEN0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:11.094Z [CHANNEL_RED0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:11.096Z [CHANNEL_WHITE0] (ChannelCalibration.cpp:70) setAdjustment: [255, 255, 255, active] 2024-09-19T19:12:11.098Z [CHANNEL_YELLOW0] (ChannelCalibration.cpp:70) setAdjustment: [245, 245, 5, active] 2024-09-19T19:12:12.077Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:241) setBrightness: 100 2024-09-19T19:12:12.078Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:252) setBrightnessCompensation: 0 2024-09-19T19:12:12.080Z [CHANNEL_CYAN0] (ChannelCalibration.cpp:70) setAdjustment: [5, 245, 245, active] 2024-09-19T19:12:12.084Z [CHANNEL_MAGENTA0] (ChannelCalibration.cpp:70) setAdjustment: [245, 5, 245, active] 2024-09-19T19:12:12.087Z [CHANNEL_BLUE0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:12.088Z [CHANNEL_GREEN0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:12.090Z [CHANNEL_RED0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:12.091Z [CHANNEL_WHITE0] (ChannelCalibration.cpp:70) setAdjustment: [255, 255, 255, active] 2024-09-19T19:12:12.093Z [CHANNEL_YELLOW0] (ChannelCalibration.cpp:70) setAdjustment: [245, 245, 5, active] 2024-09-19T19:12:12.532Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:241) setBrightness: 100 2024-09-19T19:12:12.536Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:252) setBrightnessCompensation: 0 2024-09-19T19:12:12.537Z [CHANNEL_CYAN0] (ChannelCalibration.cpp:70) setAdjustment: [5, 245, 245, active] 2024-09-19T19:12:12.540Z [CHANNEL_MAGENTA0] (ChannelCalibration.cpp:70) setAdjustment: [245, 5, 245, active] 2024-09-19T19:12:12.543Z [CHANNEL_BLUE0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:12.544Z [CHANNEL_GREEN0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:12.546Z [CHANNEL_RED0] (ChannelCalibration.cpp:80) setCorrection: 255 2024-09-19T19:12:12.548Z [CHANNEL_WHITE0] (ChannelCalibration.cpp:70) setAdjustment: [255, 255, 255, active] 2024-09-19T19:12:12.549Z [CHANNEL_YELLOW0] (ChannelCalibration.cpp:70) setAdjustment: [245, 245, 5, active] 2024-09-19T19:12:16.770Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:214) setBacklightColored: 1 2024-09-19T19:12:17.180Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:214) setBacklightColored: 0 2024-09-19T19:12:31.236Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:12:31.236Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:12:31.236Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:12:31.236Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:12:31.237Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:12:31.237Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:12:31.261Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}] 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:12:31.262Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:12:31.264Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:12:31.264Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:12:31.264Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:12:31.278Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:12:31.279Z [PERFORMANCE] [USB: FPS = 57.88, decoding = 16ms, frames = 3473, invalid = 0, mode = direct], [INSTANCE0: FPS = 57.90, processed = 3474] 2024-09-19T19:12:31.279Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:12:34.749Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:12:34.749Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:12:34.749Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:12:34.749Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:12:34.749Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:12:34.749Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:12:34.773Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:12:34.774Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:12:34.774Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":true,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}] 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 403181568 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:12:34.775Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:12:34.777Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:12:34.777Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:12:34.777Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:12:34.792Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:12:34.792Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:12:49.348Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:12:49.348Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:12:49.349Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:12:49.349Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:12:49.349Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:12:49.349Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:12:49.372Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}] 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:12:49.373Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:12:49.374Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:12:49.374Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:12:49.374Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:12:49.382Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:12:49.382Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:12:54.251Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:12:54.251Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:12:54.251Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:12:54.251Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:12:54.251Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:12:54.251Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:12:54.275Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":true,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"sub_min_cool_adjust"}] 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 403181568 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:12:54.276Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:12:54.278Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:12:54.278Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:12:54.278Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:12:54.293Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:12:54.293Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:12:54.798Z [V4L2:USB2 VIDEO: US] Video cache: size: 7, hits: 3602, needed: 0, cleanup: 0, limit: 8 2024-09-19T19:13:04.067Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:13:04.067Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:13:04.067Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:13:04.068Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:13:04.068Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:13:04.068Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:13:04.094Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:13:04.097Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:13:04.097Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":true,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"sub_min_warm_adjust"}] 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 403181568 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:13:04.098Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:13:04.100Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:13:04.100Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:13:04.100Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:13:04.114Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:13:04.114Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:13:07.146Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:13:07.146Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:13:07.146Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:13:07.146Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:13:07.146Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:13:07.146Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:13:07.171Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":true,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"white_off"}] 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:13:07.172Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:13:07.173Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:13:07.173Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 403181568 2024-09-19T19:13:07.173Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:13:07.173Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:13:07.174Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:13:07.175Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:13:07.175Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:13:07.189Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:13:07.190Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:13:09.922Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:13:09.922Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:13:09.922Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:13:09.922Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:13:09.922Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:13:09.922Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:13:09.946Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:13:09.947Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:13:09.947Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"white_off"}] 2024-09-19T19:13:09.947Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:13:09.947Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:13:09.947Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:13:09.948Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:13:09.948Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:13:09.948Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:13:09.948Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:13:09.948Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:13:09.948Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:13:09.948Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:13:09.949Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:13:09.950Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:13:09.950Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:13:09.967Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:13:09.967Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:13:13.640Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:13:13.640Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:13:13.640Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:13:13.640Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:13:13.640Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:13:13.640Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:13:13.664Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"sub_min_warm_adjust"}] 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:13:13.665Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:13:13.667Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:13:13.667Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:13:13.667Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:13:13.681Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:13:13.681Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:13:16.602Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:13:16.602Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:13:16.602Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:13:16.602Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:13:16.602Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:13:16.602Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:13:16.626Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:13:16.627Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:13:16.627Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"sub_min_cool_adjust"}] 2024-09-19T19:13:16.627Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:13:16.627Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:13:16.627Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:13:16.627Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:13:16.627Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:13:16.628Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:13:16.628Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:13:16.628Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:13:16.628Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:13:16.628Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:13:16.629Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:13:16.630Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:13:16.630Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:13:16.646Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:13:16.646Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:13:19.644Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:13:19.644Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:13:19.644Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:13:19.644Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:13:19.644Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:13:19.644Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:13:19.668Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:13:19.669Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:13:19.669Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x","whiteAlgorithm":"subtract_minimum"}] 2024-09-19T19:13:19.669Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:13:19.670Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:13:19.672Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:13:19.672Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:13:19.673Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:13:19.686Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:13:19.686Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:13:21.839Z [LEDDEVICE0_WS281X] (LedDevice.cpp:286) Stop device 2024-09-19T19:13:21.839Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:13:21.839Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:13:21.839Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:13:21.839Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:13:21.839Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:13:21.863Z [LEDDEVICE0_WS281X] Stopped LedDevice 'ws281x' 2024-09-19T19:13:21.864Z [LEDDEVICE0_WS281X] Start LedDevice 'ws281x'. 2024-09-19T19:13:21.864Z [LEDDEVICE0_WS281X] (LedDevice.cpp:337) deviceConfig: [{"colorOrder":"grb","currentLedCount":284,"dma":5,"gpio":18,"hardwareLedCount":null,"invert":true,"leds":280,"pwmchannel":0,"refreshTime":17,"rgbw":false,"smoothingRefreshTime":17,"type":"ws281x"}] 2024-09-19T19:13:21.864Z [LEDDEVICE0_WS281X] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 58.82 Hz 2024-09-19T19:13:21.864Z [LEDDEVICE0_WS281X] (LedDevice.cpp:423) Refresh rate = 58.82 Hz 2024-09-19T19:13:21.864Z [LEDDEVICE0_WS281X] (LedDevice.cpp:373) Device is not ready to start a timer 2024-09-19T19:13:21.864Z [LEDDEVICE0_WS281X] (LedDevice.cpp:433) Refresh interval updated to 17ms 2024-09-19T19:13:21.865Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:66) ws281x selected dma : 5 2024-09-19T19:13:21.865Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:67) ws281x selected channel : 0 2024-09-19T19:13:21.865Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:68) ws281x total channels : 2 2024-09-19T19:13:21.865Z [LEDDEVICE0_WS281X] (LedDeviceWS281x.cpp:69) ws281x strip type : 1050624 2024-09-19T19:13:21.865Z [LEDDEVICE0_WS281X] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it). 2024-09-19T19:13:21.865Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:13:21.866Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:13:21.866Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:13:21.866Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:13:21.881Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:13:21.881Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:13:44.971Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"","params":{},"subcommand":"hasLedClock","tan":1}] 2024-09-19T19:13:54.800Z [V4L2:USB2 VIDEO: US] Video cache: size: 6, hits: 3602, needed: 0, cleanup: 1, limit: 8 2024-09-19T19:14:25.263Z [BLACKBORDER] Set mode to: default 2024-09-19T19:14:54.801Z [PERFORMANCE] [USB: FPS = 60.05, decoding = 13ms, frames = 3603, invalid = 0, mode = direct], [INSTANCE0: FPS = 59.84, processed = 3591], [LED0: FPS = 58.79, send = 3527, processed = 3527, dropped = 0] 2024-09-19T19:14:54.802Z [V4L2:USB2 VIDEO: US] Video cache: size: 7, hits: 3602, needed: 0, cleanup: 0, limit: 8 2024-09-19T19:15:54.804Z [V4L2:USB2 VIDEO: US] Video cache: size: 5, hits: 3602, needed: 0, cleanup: 1, limit: 8 2024-09-19T19:15:54.806Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 14ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:16:20.138Z [SIGNAL_OLD] Signal lost 2024-09-19T19:16:21.617Z [MUXER0] Priority 240 is now inactive 2024-09-19T19:16:21.617Z [MUXER0] Set visible priority to 255 2024-09-19T19:16:21.617Z [HYPERHDR0] New priority[255], previous [240] 2024-09-19T19:16:21.617Z [HYPERHDR0] No source left -> switch LED-Device off 2024-09-19T19:16:21.617Z [SMOOTHING0] Clearing queued colors before: disabling 2024-09-19T19:16:21.617Z [SMOOTHING0] Smoothing queue is cleared 2024-09-19T19:16:21.617Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 14ms, frames = 3602, invalid = 0, mode = direct], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:16:21.617Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-09-19T19:16:21.617Z [LEDDEVICE0_WS281X] (LedDevice.cpp:297) Disable the device 2024-09-19T19:16:21.617Z [LEDDEVICE0_WS281X] (LedDevice.cpp:381) Stopping refresh timer 2024-09-19T19:16:21.617Z [LEDDEVICE0_WS281X] (LedDevice.cpp:90) Switch off 2024-09-19T19:16:21.617Z [LEDDEVICE0_WS281X] (LedDevice.cpp:126) Power Off 2024-09-19T19:16:21.617Z [LEDDEVICE0_WS281X] (LedDevice.cpp:544) Set LED strip to black/power off 2024-09-19T19:16:21.641Z [COMPONENTCTRL0] LED device: disabled 2024-09-19T19:16:21.641Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 14ms, frames = 3602, invalid = 0, mode = direct] 2024-09-19T19:16:54.789Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 13ms, frames = 3601, invalid = 0, mode = direct] 2024-09-19T19:16:54.788Z [V4L2:USB2 VIDEO: US] Video cache: size: 6, hits: 3601, needed: 0, cleanup: 0, limit: 8 2024-09-19T19:17:43.337Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-09-19T19:17:54.790Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 12ms, frames = 3602, invalid = 0, mode = direct] 2024-09-19T19:17:54.791Z [V4L2:USB2 VIDEO: US] Video cache: size: 5, hits: 3602, needed: 0, cleanup: 1, limit: 8 2024-09-19T19:18:09.601Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:18:18.693Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:18:54.798Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 12ms, frames = 3602, invalid = 0, mode = direct] 2024-09-19T19:18:54.798Z [V4L2:USB2 VIDEO: US] Video cache: size: 5, hits: 3602, needed: 0, cleanup: 0, limit: 8 2024-09-19T19:19:19.590Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:19:54.794Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 12ms, frames = 3602, invalid = 0, mode = direct] 2024-09-19T19:19:54.795Z [V4L2:USB2 VIDEO: US] Video cache: size: 4, hits: 3602, needed: 0, cleanup: 1, limit: 8 2024-09-19T19:20:19.603Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:20:54.796Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 12ms, frames = 3602, invalid = 0, mode = direct] 2024-09-19T19:20:54.796Z [V4L2:USB2 VIDEO: US] Video cache: size: 4, hits: 3602, needed: 0, cleanup: 0, limit: 8 2024-09-19T19:21:54.798Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 12ms, frames = 3602, invalid = 0, mode = direct] 2024-09-19T19:21:54.798Z [V4L2:USB2 VIDEO: US] Video cache: size: 3, hits: 3602, needed: 0, cleanup: 1, limit: 8 2024-09-19T19:22:03.928Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:22:54.789Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 13ms, frames = 3601, invalid = 0, mode = direct] 2024-09-19T19:23:04.645Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:23:26.063Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:23:54.805Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 12ms, frames = 3603, invalid = 0, mode = direct] 2024-09-19T19:24:54.804Z [PERFORMANCE] [USB: FPS = 60.04, decoding = 13ms, frames = 3602, invalid = 0, mode = direct] 2024-09-19T19:25:54.789Z [PERFORMANCE] [USB: FPS = 60.02, decoding = 12ms, frames = 3600, invalid = 0, mode = direct] 2024-09-19T19:25:54.789Z [V4L2:USB2 VIDEO: US] Video cache: size: 2, hits: 3601, needed: 1, cleanup: 0, limit: 8 2024-09-19T19:26:16.978Z [SIGNAL_OLD] Signal detected 2024-09-19T19:26:16.978Z [MUXER0] Priority 240 is now active 2024-09-19T19:26:16.978Z [MUXER0] Set visible priority to 240 2024-09-19T19:26:16.979Z [HYPERHDR0] New priority[240], previous [255] 2024-09-19T19:26:16.979Z [HYPERHDR0] New source available -> switch LED-Device on 2024-09-19T19:26:16.979Z [SMOOTHING0] Clearing queued colors before: enabling 2024-09-19T19:26:16.979Z [SMOOTHING0] Smoothing queue is cleared 2024-09-19T19:26:16.979Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 1 2024-09-19T19:26:16.979Z [LEDDEVICE0_WS281X] (LedDevice.cpp:247) Enable the device 2024-09-19T19:26:16.981Z [LEDDEVICE0_WS281X] (LedDevice.cpp:64) Switch on 2024-09-19T19:26:16.981Z [LEDDEVICE0_WS281X] (LedDevice.cpp:140) Power On 2024-09-19T19:26:16.981Z [LEDDEVICE0_WS281X] (LedDevice.cpp:367) Starting timer with interval = 17ms 2024-09-19T19:26:16.981Z [COMPONENTCTRL0] LED device: enabled 2024-09-19T19:26:16.982Z [SMOOTHING0] Using alternative smoothing input (0) 2024-09-19T19:26:17.015Z [SMOOTHING0] Using alternative smoothing procedure (0) 2024-09-19T19:26:21.456Z [SIGNAL_OLD] Signal lost 2024-09-19T19:26:22.238Z [SIGNAL_OLD] Signal detected 2024-09-19T19:26:26.806Z [IMAGETOLED_MNG0] Total index number is: 27559 (memory: 27559). User sparse processing is: enabled, image size: 800 x 600, area number: 284 2024-09-19T19:27:39.255Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:27:48.411Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-09-19T19:27:51.311Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:27:54.800Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 16ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.01, processed = 3601], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:28:28.456Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it! 2024-09-19T19:28:53.679Z [IMAGETOLED_MNG0] Total index number is: 25572 (memory: 25572). User sparse processing is: enabled, image size: 800 x 600, area number: 284 2024-09-19T19:28:54.801Z [PERFORMANCE] [USB: FPS = 60.01, decoding = 16ms, frames = 3601, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.06, processed = 3604], [LED0: FPS = 58.82, send = 3529, processed = 3529, dropped = 0] 2024-09-19T19:29:37.090Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-09-19T19:29:39.064Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:29:44.512Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:29:54.803Z [PERFORMANCE] [USB: FPS = 60.05, decoding = 16ms, frames = 3603, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:29:56.237Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c 2024-09-19T19:30:54.799Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 16ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 58.82, send = 3529, processed = 3529, dropped = 0] 2024-09-19T19:31:32.745Z [IMAGETOLED_MNG0] Total index number is: 22997 (memory: 22997). User sparse processing is: enabled, image size: 800 x 600, area number: 284 2024-09-19T19:31:54.800Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 16ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.03, processed = 3602], [LED0: FPS = 58.82, send = 3529, processed = 3529, dropped = 0] 2024-09-19T19:32:05.860Z [IMAGETOLED_MNG0] Total index number is: 32376 (memory: 32376). User sparse processing is: enabled, image size: 800 x 600, area number: 284 2024-09-19T19:32:54.801Z [PERFORMANCE] [USB: FPS = 60.03, decoding = 16ms, frames = 3602, invalid = 0, mode = direct], [INSTANCE0: FPS = 60.04, processed = 3602], [LED0: FPS = 58.82, send = 3530, processed = 3530, dropped = 0] 2024-09-19T19:32:54.801Z [V4L2:USB2 VIDEO: US] Video cache: size: 3, hits: 3602, needed: 1, cleanup: 0, limit: 8 2024-09-19T19:33:25.046Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client 2a02:8108:94c0:3050:19cb:bf8a:ebcf:8e7c

Steps to reproduce

I'm new to HyperHDR and set everything up, but one issue is left. I tried to solve it, but was unsuccessful. It isn't a bug in itself, it's just an issue I have and I couldn't find any solution to this problem. I set up red and green with the rgb order wizard, there I get the right colors. The issue is, that my capture card captures the colors wrong, green is purple, purple is green, blue is red, red is blue, .... Im thankful for any help.

What is expected?

Show right LED-colors like the one displayed.

What is actually happening?

Wrong LED-colors.

System

System info

Version 20.0.0.0

HyperHDR Server:

HyperHDR Server OS:

awawa-dev commented 1 month ago

Hi Did you see the pinned topic in the discussions https://github.com/awawa-dev/HyperHDR/discussions/848 ?

8L12 commented 1 month ago

Hi Did you see the pinned topic in the discussions #848 ?

Thanks for the fast answer. I really didn't see the discussion. Sorry, but thanks for the help.