search

awawa-dev / HyperSerialEsp8266

High speed 2Mb USB serial port LED strip HyperHDR driver using Esp8266 device.
https://hyperhdr.blogspot.com
MIT License
38 stars 69 forks source link

Desperate for help - Cannot communicate with LEDs through ESP8266 #37

Closed iCanHazSkillz closed 10 months ago

iCanHazSkillz commented 10 months ago

I'd like to preface that this is most likely not an issue with hyperSerialEsp8266, but I don't know where to turn to at this point.

I've successfully managed to flashed my ESP8266 ESP-12F D1 Mini Module (CH340) (purchased here: https://www.amazon.ca/dp/B09X389JFJ?psc=1&ref=ppx_yo2ov_dt_b_product_details) with firmware_SK6812_RGBW_NEUTRAL.bin

My SK6812 LED strip lights up fine and according to the logs in hyperHDR, it appears it's able to interface with the ESP8266 through adalight COM3. The ESP8266 is connected through USB on the WIN PC running HyperHDR.

However, any attempt to change colors in hyperHDR does absolutely nothing.

Here are my configuration and logs: image image

2024-01-07T17:08:05.695Z [MAIN] TTY is not attached to the log output 2024-01-07T17:08:05.695Z [MAIN] Database path: 'C:/Users/Michel/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled 2024-01-07T17:08:05.695Z [MAIN] Starting HyperHdr - 20.0.0.0beta1, (HEAD detached at v20.0.0.0beta1) (GitHub-ccd22a1/558c7e0-1703192848), built: Dec 23 2023:14:34:46 2024-01-07T17:08:05.695Z [MAIN] Set user data path to 'C:/Users/Michel/.hyperhdr' 2024-01-07T17:08:05.695Z [INSTANCE_CFG] Loading instance configuration 2024-01-07T17:08:05.697Z [DB] Database opened: C:/Users/Michel/.hyperhdr/db/hyperhdr.db 2024-01-07T17:08:05.711Z [INSTANCE_CFG] Settings database initialized 2024-01-07T17:08:05.715Z [SOUND_GRABBER] Sound device is disabled 2024-01-07T17:08:05.778Z [JSONSERVER] (JsonServer.cpp:26) Created new instance 2024-01-07T17:08:05.782Z [JSONSERVER] Started on port 19444 2024-01-07T17:08:05.782Z [SSDP] (SSDPHandler.cpp:31) SSDPHandler is initialized 2024-01-07T17:08:05.782Z [MAIN] start systray 2024-01-07T17:08:05.743Z [Media Foundation:auto] (GrabberWrapper.cpp:55) Starting the grabber wrapper 2024-01-07T17:08:05.743Z [MEDIA_FOUNDATION:AUTO] Starting to enumerate video capture devices 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] (MFGrabber.cpp:427) Detected 0 devices 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] Restarting video grabber is now blocked due to reloading of the configuration 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0 2024-01-07T17:08:05.744Z [Media Foundation:auto] (GrabberWrapper.cpp:126) CEC keycode. Start: 0, stop: 0 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:273) setBrightnessContrastSaturationHue nothing changed 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] (MFGrabber.cpp:185) setHdrToneMappingMode to: Disabled 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:182) setFpsSoftwareDecimation to: 1 2024-01-07T17:08:05.744Z [HYPERHDR0] Starting the instance 2024-01-07T17:08:05.744Z [INSTANCE_CFG0] Loading instance configuration 2024-01-07T17:08:05.744Z [SIGNAL_OLD] (DetectionManual.cpp:84) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000 2024-01-07T17:08:05.744Z [SIGNAL_OLD] (DetectionManual.cpp:74) Signal threshold set to: {12, 12, 12} and frames: 200 2024-01-07T17:08:05.744Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:376) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 5000, wakeTime: 1000 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:380) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto' 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] Delayed restart of the grabber due to change of selected device 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:200) Force encoding to: NO_CHANGE (old: NO_CHANGE) 2024-01-07T17:08:05.744Z [MEDIA_FOUNDATION:AUTO] setQFrameDecimation is now: disabled 2024-01-07T17:08:05.745Z [DB] Database opened: C:/Users/Michel/.hyperhdr/db/hyperhdr.db 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] Restarting video grabber is now blocked due to reloading of the configuration 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] (Grabber.cpp:159) Set new width: 512, height: 512 for capture 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] (Grabber.cpp:335) setWidthHeight preparing to restarting video grabber 0 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] Delayed restart of the grabber due to change of the capturing resolution 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] Delayed restart of the grabber due to change of the framerate 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:125) setHdrToneMappingMode to: Disabled 2024-01-07T17:08:05.746Z [SIGNAL_OLD] (DetectionManual.cpp:84) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000 2024-01-07T17:08:05.746Z [SIGNAL_OLD] (DetectionManual.cpp:74) Signal threshold set to: {12, 12, 12} and frames: 200 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] (Grabber.cpp:380) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto' 2024-01-07T17:08:05.746Z [DX11_SYSTEM:AUTO] Delayed restart of the grabber due to change of selected device 2024-01-07T17:08:05.764Z [INSTANCE_CFG0] Settings database initialized 2024-01-07T17:08:05.764Z [COMPONENTCTRL0] (ComponentController.cpp:30) ComponentController is initialized 2024-01-07T17:08:05.766Z [BLACKBORDER] Set mode to: default 2024-01-07T17:08:05.766Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:192) Set LED mapping type to unicolor_mean 2024-01-07T17:08:05.766Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:176) setSparseProcessing to 0 2024-01-07T17:08:05.766Z [IMAGETOLED_MNG0] (ImageToLedManager.cpp:103) ImageToLedManager initialized 2024-01-07T17:08:05.766Z [MUXER0] (Muxer.cpp:55) Muxer initialized 2024-01-07T17:08:05.766Z [COLORSPACE_CALIBRATION0] classicMode: no, gammas:[1.50, 1.50, 1.50], saturation: 1.00, luminance: 1.00, backLight: [enabled, threshold: 1, colored: yes] 2024-01-07T17:08:05.766Z [LED_CALIBRATION0] (LedCalibration.cpp:101) Calibration config '0' for LED segment: [0, 299] 2024-01-07T17:08:05.767Z [HYPERHDR0] Led strip RGB order is: rgb 2024-01-07T17:08:05.767Z [SMOOTHING0] High resolution clock is steady (good) 2024-01-07T17:08:05.767Z [SMOOTHING0] Creating config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250 2024-01-07T17:08:05.767Z [SMOOTHING0] Clearing queued colors before: disabling. Smoothing configuration changed: restarting timer. 2024-01-07T17:08:05.767Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:08:05.767Z [SMOOTHING0] Selecting config (0) => type: Alternative, directMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250 2024-01-07T17:08:05.767Z [SMOOTHING0] Selecting config (0) => type: Alternative, directMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 32, antiFlickStep: 2, antiFlickTime: 250 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'. 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:310) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":300,"espHandshake":true,"maxRetry":0,"output":"COM3","rate":2000000,"refreshTime":0,"smoothingRefreshTime":0,"type":"adalight","white_channel_blue":255,"white_channel_calibration":true,"white_channel_green":255,"white_channel_limit":100,"white_channel_red":255}] 2024-01-07T17:08:05.783Z [HYPER_MANAGER] HyperHDR instance 'First LED instance' has been started 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:406) Refresh interval updated to 0ms 2024-01-07T17:08:05.768Z [HYPERHDR0] The instance is running 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:49) DeviceType : adalight 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) LedCount : 300 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) RefreshTime : 0 2024-01-07T17:08:05.768Z [MUXER0] Register new input 'System/VIDEOGRABBER' with priority 240 as inactive 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:65) Device name : COM3 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:66) Auto selection: 0 2024-01-07T17:08:05.768Z [COMPONENTCTRL0] Video capture device: enabled 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Baud rate : 2000000 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) ESP handshake : ON 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Delayed open : 0 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) Retry limit : 0 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:89) Adalight header for 300 leds: AwA 0x01 0x2b 0x7f 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:45) White channel limit: 255, red: 255, green: 255, blue: 255 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] Opening UART: COM3 2024-01-07T17:08:05.768Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): COM3, Baud rate [2000000]bps 2024-01-07T17:08:05.768Z [MEDIA_FOUNDATION:AUTO] Multithreading for MEDIA_FOUNDATION is enabled. Available thread's count 4 2024-01-07T17:08:05.768Z [MEDIA_FOUNDATION:AUTO] Starting to enumerate video capture devices 2024-01-07T17:08:05.768Z [MEDIA_FOUNDATION:AUTO] (MFGrabber.cpp:427) Detected 0 devices 2024-01-07T17:08:05.768Z [MEDIA_FOUNDATION:AUTO] (MFGrabber.cpp:262) Forcing auto discovery device 2024-01-07T17:08:05.768Z [MEDIA_FOUNDATION:AUTO] Could not find any capture device 2024-01-07T17:08:05.769Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: COM3 2024-01-07T17:08:05.769Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: \.\COM3 2024-01-07T17:08:05.769Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: USB-SERIAL CH340 2024-01-07T17:08:05.769Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: wch.cn 2024-01-07T17:08:05.769Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x7523 2024-01-07T17:08:05.769Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x1a86 2024-01-07T17:08:05.769Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber:
2024-01-07T17:08:05.784Z [WEBSERVER] Initialize Webserver 2024-01-07T17:08:05.784Z [FLATBUFSERVER] Started on port 19400 2024-01-07T17:08:05.784Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain' 2024-01-07T17:08:05.787Z [WEBSERVER] Apply Webserver settings 2024-01-07T17:08:05.787Z [WEBSERVER] Set document root to: :/www 2024-01-07T17:08:05.787Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTP)' on port: 8090 2024-01-07T17:08:05.787Z [SSDP] (SSDPHandler.cpp:93) The local address is empty 2024-01-07T17:08:05.787Z [WEBSERVER] Initialize Webserver 2024-01-07T17:08:05.787Z [WEBSERVER] Apply Webserver settings 2024-01-07T17:08:05.787Z [WEBSERVER] Set document root to: :/www 2024-01-07T17:08:05.852Z [WEBSERVER] Setup SSL certificate 2024-01-07T17:08:05.852Z [WEBSERVER] Setup private SSL key 2024-01-07T17:08:05.853Z [WEBSERVER] Started: 'HyperHDR WebServer (HTTPS)' on port: 8092 2024-01-07T17:08:05.853Z [SSDP] (SSDPHandler.cpp:42) SSDPHandler is initializing 2024-01-07T17:08:05.855Z [SSDP] (SSDPHandler.cpp:183) The local address is: 192.168.0.192 2024-01-07T17:08:05.855Z [SSDP] (SSDPServer.cpp:95) Initialize the SSDP server 2024-01-07T17:08:05.855Z [WEBSERVER] (StaticFileServing.cpp:68) SSDP description is set up 2024-01-07T17:08:05.855Z [SSDP] Starting the SSDP server 2024-01-07T17:08:05.913Z [NETFORWARDER] Forwarder has changed state to disabled 2024-01-07T17:08:06.019Z [MUXER0] Set visible priority to 255 2024-01-07T17:08:06.019Z [HYPERHDR0] New priority[255], previous [255] 2024-01-07T17:08:06.019Z [HYPERHDR0] No source left -> switch LED-Device off 2024-01-07T17:08:06.019Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T17:08:06.019Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:08:06.019Z [COLORSPACE_CALIBRATION0] (ColorSpaceCalibration.cpp:225) setBackLightEnabled: 0 2024-01-07T17:08:06.143Z [LEDDEVICE0_ADALIGHT] ESP sent: '' 2024-01-07T17:08:06.164Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 8. NeoPi) at 22 msec 2024-01-07T17:08:06.164Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T17:08:06.164Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T17:08:06.164Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T17:08:06.164Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T17:08:06.164Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T17:08:06.164Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T17:08:06.164Z [MUXER0] Register new input 'System/COLOR' with priority 0 as inactive 2024-01-07T17:08:06.164Z [MUXER0] Priority 0 is now active 2024-01-07T17:08:06.164Z [MUXER0] Set visible priority to 0 2024-01-07T17:08:06.164Z [HYPERHDR0] New priority[0], previous [255] 2024-01-07T17:08:06.164Z [HYPERHDR0] New source available -> switch LED-Device on 2024-01-07T17:08:06.164Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T17:08:06.164Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:08:06.164Z [HYPERHDR0] Boot effect: color set to [255, 0, 0] 2024-01-07T17:08:06.182Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T17:08:06.257Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'xelBus SK6812 neutral GRBW.

RGBW => Gain: 255/255, red: 176 , green: 176 , blue: 112 HyperHDR frames: 0 (FPS), rece' (119) 2024-01-07T17:08:06.269Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: COM3 2024-01-07T17:08:06.269Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T17:08:06.269Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T17:08:06.269Z [LEDDEVICE0_ADALIGHT] Opening UART: COM3 2024-01-07T17:08:06.269Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): COM3, Baud rate [2000000]bps 2024-01-07T17:08:06.270Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: COM3 2024-01-07T17:08:06.270Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: \.\COM3 2024-01-07T17:08:06.270Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: USB-SERIAL CH340 2024-01-07T17:08:06.270Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: wch.cn 2024-01-07T17:08:06.270Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x7523 2024-01-07T17:08:06.270Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x1a86 2024-01-07T17:08:06.270Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber:
2024-01-07T17:08:06.650Z [LEDDEVICE0_ADALIGHT] ESP sent: '' 2024-01-07T17:08:06.672Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 8. NeoPi) at 23 msec 2024-01-07T17:08:06.672Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T17:08:06.672Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T17:08:06.672Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T17:08:07.290Z [NET_DISCOVERY] Found ESP board at COM3:-1 (USB-SERIAL CH340) 2024-01-07T17:08:07.289Z [SERVICE_mDNS] Starting the network discovery thread 2024-01-07T17:08:09.267Z [MUXER0] Timeout clear for priority 0 2024-01-07T17:08:09.267Z [MUXER0] Set visible priority to 255 2024-01-07T17:08:09.267Z [HYPERHDR0] New priority[255], previous [0] 2024-01-07T17:08:09.267Z [HYPERHDR0] No source left -> switch LED-Device off 2024-01-07T17:08:09.267Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T17:08:09.267Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:08:09.267Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T17:08:09.267Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T17:08:09.267Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T17:08:09.285Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T17:08:09.313Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'xelBus SK6812 neutral GRBW.

RGBW => Gain: 255/255, red: 176 , green: 176 , blue: 112 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 41232 RGBW => Gain: 255/255, red: 176 , green: 176 , blue: 112 HyperHDR frames: 2 (FPS), rece' (250) 2024-01-07T17:08:09.324Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: COM3 2024-01-07T17:08:09.324Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T17:09:14.454Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:127.0.0.1 2024-01-07T17:09:32.117Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":219}] 2024-01-07T17:09:32.118Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"USB-SERIAL CH340 (\\.\COM3)","value":"COM3"}],"ledDeviceType":"adalight"}] 2024-01-07T17:09:48.218Z [WEBSOCKET] (WebSocketClient.cpp:188) send close: 1000 2024-01-07T17:12:19.676Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.207 2024-01-07T17:13:03.887Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":115}] 2024-01-07T17:13:03.888Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"USB-SERIAL CH340 (\\.\COM3)","value":"COM3"}],"ledDeviceType":"adalight"}] 2024-01-07T17:13:08.462Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T17:13:08.462Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:13:08.462Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T17:13:08.462Z [LEDDEVICE0_ADALIGHT] Opening UART: COM3 2024-01-07T17:13:08.462Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): COM3, Baud rate [2000000]bps 2024-01-07T17:13:08.463Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: COM3 2024-01-07T17:13:08.463Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: \.\COM3 2024-01-07T17:13:08.463Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: USB-SERIAL CH340 2024-01-07T17:13:08.463Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: wch.cn 2024-01-07T17:13:08.463Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x7523 2024-01-07T17:13:08.463Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x1a86 2024-01-07T17:13:08.463Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber:
2024-01-07T17:13:08.864Z [LEDDEVICE0_ADALIGHT] ESP sent: '' 2024-01-07T17:13:08.885Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 8. NeoPi) at 21 msec 2024-01-07T17:13:08.885Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T17:13:08.885Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T17:13:08.885Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T17:13:25.009Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.0.207/COLOR' with priority 1 as inactive 2024-01-07T17:13:25.009Z [MUXER0] Priority 1 is now active 2024-01-07T17:13:25.010Z [MUXER0] Set visible priority to 1 2024-01-07T17:13:25.010Z [HYPERHDR0] New priority[1], previous [255] 2024-01-07T17:13:25.010Z [HYPERHDR0] New source available -> switch LED-Device on 2024-01-07T17:13:25.010Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T17:13:25.010Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:13:25.010Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T17:14:22.171Z [MUXER0] Removed source priority 1 2024-01-07T17:14:22.171Z [MUXER0] Set visible priority to 255 2024-01-07T17:14:22.171Z [HYPERHDR0] New priority[255], previous [1] 2024-01-07T17:14:22.171Z [HYPERHDR0] No source left -> switch LED-Device off 2024-01-07T17:14:22.171Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T17:14:22.171Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:14:22.171Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T17:14:22.171Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T17:14:22.171Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T17:14:22.189Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T17:14:22.217Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'xelBus SK6812 neutral GRBW.

RGBW => Gain: 255/255, red: 176 , green: 176 , blue: 112 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 2024-01-07T17:14:22.227Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: COM3 2024-01-07T17:14:22.227Z [COMPONENTCTRL0] LED device: disabled 2024-01-07T17:14:32.397Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.0.207/COLOR' with priority 1 as inactive 2024-01-07T17:14:32.397Z [MUXER0] Priority 1 is now active 2024-01-07T17:14:32.397Z [MUXER0] Set visible priority to 1 2024-01-07T17:14:32.397Z [HYPERHDR0] New priority[1], previous [255] 2024-01-07T17:14:32.397Z [HYPERHDR0] New source available -> switch LED-Device on 2024-01-07T17:14:32.397Z [SMOOTHING0] Clearing queued colors before: enabling 2024-01-07T17:14:32.397Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:14:32.398Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:220) Enable the device 2024-01-07T17:14:32.398Z [LEDDEVICE0_ADALIGHT] Opening UART: COM3 2024-01-07T17:14:32.398Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:206) _serialPort.open(QIODevice::ReadWrite): COM3, Baud rate [2000000]bps 2024-01-07T17:14:32.399Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:211) portName: COM3 2024-01-07T17:14:32.399Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:212) systemLocation: \.\COM3 2024-01-07T17:14:32.399Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:213) description: USB-SERIAL CH340 2024-01-07T17:14:32.399Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) manufacturer: wch.cn 2024-01-07T17:14:32.399Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) productIdentifier: 0x7523 2024-01-07T17:14:32.399Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) vendorIdentifier: 0x1a86 2024-01-07T17:14:32.399Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) serialNumber:
2024-01-07T17:14:32.799Z [LEDDEVICE0_ADALIGHT] ESP sent: '' 2024-01-07T17:14:32.808Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 8. NeoPi) at 9 msec 2024-01-07T17:14:32.808Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:63) Switch on 2024-01-07T17:14:32.808Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:139) Power On 2024-01-07T17:14:32.808Z [COMPONENTCTRL0] LED device: enabled 2024-01-07T17:14:50.828Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":202}] 2024-01-07T17:14:50.828Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"USB-SERIAL CH340 (\\.\COM3)","value":"COM3"}],"ledDeviceType":"adalight"}] 2024-01-07T17:15:18.473Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.207 2024-01-07T17:19:33.264Z [MUXER0] Timeout clear for priority 1 2024-01-07T17:19:33.264Z [MUXER0] Set visible priority to 255 2024-01-07T17:19:33.264Z [HYPERHDR0] New priority[255], previous [1] 2024-01-07T17:19:33.264Z [HYPERHDR0] No source left -> switch LED-Device off 2024-01-07T17:19:33.264Z [SMOOTHING0] Clearing queued colors before: disabling 2024-01-07T17:19:33.264Z [SMOOTHING0] Smoothing queue is cleared 2024-01-07T17:19:33.264Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:270) Disable the device 2024-01-07T17:19:33.264Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:89) Switch off 2024-01-07T17:19:33.264Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:517) Set LED strip to black/power off 2024-01-07T17:19:33.282Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:143) Flush was successful 2024-01-07T17:19:33.310Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'xelBus SK6812 neutral GRBW.

RGBW => Gain: 255/255, red: 176 , green: 176 , blue: 112 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, heap: 39976 RGBW => Gain: 255/255, red: 255 , green: 255 , blue: 255 2024-01-07T17:19:33.321Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:161) Serial port is closed: COM3 2024-01-07T17:19:33.321Z [COMPONENTCTRL0] LED device: disabled

awawa-dev commented 10 months ago

Hi This is not full configuration but I suspect you are just missing a video source or you are doing something wrong when setting the colour: there is a boot effect and it generates some frames so the connection is working for a while but then it stops as effect quits. Proceed according to the benchmark procedure described in the last post on the blog and test using colour with continue output enabled in the smoothing.

iCanHazSkillz commented 10 months ago

The setup I've shared above had the ESP8266 hooked up to my PC. I've managed to get the setup working using WLED in HyperHDR and using the ESP8266 over WiFi. While everything is working fine, there is a noticeable delay which I'd really like to get rid of.

I tried using hyperserialesp8266 on my LG TV running PicCap and HyperHDR. The performance section from the overview page seems to show that the LED strip is communicating with HyperHDR; however I'm unable to get the light to respond to any command sent through HyperHDR and the logs keeps repeating that it could not detect HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico device no matter which available interface (TTY0/1/2) I used or which USB I used on the back of the LG TV.

2024-01-07_20-06-39 2024-01-07_20-07-10 2024-01-07_20-07-31

Here's the wiring I'm using: Wiring Diagram (ESP8266 to LGUSB)

Are there special drivers that need to be installed for the LG TV USB to interface with HyperHDR?

awawa-dev commented 10 months ago

From what I remember, WebOS does not have drivers for every serial device... the best supported were probably devices that work on the serial CDC layer, i.e. Pico, ESP32-s2 mini or ESP32 MH-ET Live (CH9102x). In HyperHDR Adalight driver set the device to 'auto' and try turn them on: in the logs you will find a list of devices and, most importantly, for each productId/vendorId. Although, due to the infamous bug in udev, this is not the final oracle yet, but it may be a hint. I don't know which version of WLED you are using, but if it is the latest one, there are performance problems with the esp8266, which may manifest themselves in different ways. Everything indicates that this board will no longer be supported by the mainstream WLED, although there may still be some limited builds available. And one more thing: if it's not a WLED problem and the delay is really noticeable, then perhaps the problem is the capture performance on WebOS and then there's not much you can do except optimize various quirks... but OpenLgTv Discord will be probably more helpful in this subject.

awawa-dev commented 10 months ago

BTW in the diagram you are missing common ground between the esp8266 and the LED strip, not to mention the missing 3.3v to 5v level shifter. But this does not affect the communication between HyperHDR and esp8266, but only the functioning of the LED, (or rather its non-functioning).