Open grssll opened 2 hours ago
024-10-26T17:37:42.904Z [IMAGETOLED_MNG0] Total index number is: 28796 (memory: 28796). User sparse processing is: disabled, image size: 720 x 576, area number: 160
2024-10-26T17:37:51.284Z [IMAGETOLED_MNG0] Total index number is: 33120 (memory: 33120). User sparse processing is: disabled, image size: 720 x 576, area number: 160
2024-10-26T17:38:04.825Z [IMAGETOLED_MNG0] Total index number is: 31740 (memory: 31740). User sparse processing is: disabled, image size: 720 x 576, area number: 160
2024-10-26T17:38:11.785Z [IMAGETOLED_MNG0] Total index number is: 33120 (memory: 33120). User sparse processing is: disabled, image size: 720 x 576, area number: 160
2024-10-26T17:38:47.686Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 3ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3000], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-10-26T17:39:04.546Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 0 frames already dropped
2024-10-26T17:39:05.547Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 1 frames already dropped
2024-10-26T17:39:06.548Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 2 frames already dropped
2024-10-26T17:39:07.550Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 3 frames already dropped
2024-10-26T17:39:08.551Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 4 frames already dropped
2024-10-26T17:39:09.551Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 5 frames already dropped
2024-10-26T17:39:09.551Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
2024-10-26T17:39:41.251Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM0
2024-10-26T17:39:41.251Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:381) Stopping refresh timer
2024-10-26T17:39:41.251Z [LEDDEVICE0_ADALIGHT] Device 'adalight' is disabled due to an error: 'Timeout writing data to ttyACM0'
2024-10-26T17:39:41.251Z [COMPONENTCTRL0] LED device: disabled
2024-10-26T17:39:41.251Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 3ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3000]
2024-10-26T17:39:47.684Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 3ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 2999]
2024-10-26T17:40:04.216Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.133
2024-10-26T17:50:32.091Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Found serial port device: Pico (/dev/ttyACM1 => ttyACM1)
2024-10-26T17:50:32.091Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyACM1
2024-10-26T17:50:32.091Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyACM1, Baud rate [2000000]bps
2024-10-26T17:50:32.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyACM1
2024-10-26T17:50:32.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyACM1
2024-10-26T17:50:32.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description: Pico
2024-10-26T17:50:32.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer: Raspberry Pi
2024-10-26T17:50:32.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0xa
2024-10-26T17:50:32.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x2e8a
2024-10-26T17:50:32.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber: DF62585783634936
2024-10-26T17:50:32.116Z [LEDDEVICE0_ADALIGHT] Detected Rp2040 type board. HyperHDR skips the reset. State: 1, 1
2024-10-26T17:50:32.117Z [LEDDEVICE0_ADALIGHT] ESP sent: 'HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 460, heap: 123232'
2024-10-26T17:50:32.118Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 9.) at 2 msec
2024-10-26T17:50:32.118Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:248) delayAfterConnect for 5000 ms - start
2024-10-26T17:50:34.481Z [SMOOTHING0] Clearing queued colors before: enabling
2024-10-26T17:50:34.481Z [SMOOTHING0] Smoothing queue is cleared
2024-10-26T17:50:34.481Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:247) Enable the device
2024-10-26T17:50:34.481Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:64) Switch on
2024-10-26T17:50:34.481Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:140) Power On
2024-10-26T17:50:34.481Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:367) Starting timer with interval = 20ms
2024-10-26T17:50:34.481Z [COMPONENTCTRL0] LED device: enabled
2024-10-26T17:50:34.482Z [SMOOTHING0] Using alternative smoothing input (0)
2024-10-26T17:50:34.522Z [SMOOTHING0] Using alternative smoothing procedure (0)
2024-10-26T17:50:36.868Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:255) delayAfterConnect for 5000 ms - finished
2024-10-26T17:50:36.869Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
2024-10-26T17:50:36.876Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 460, heap: 123232
HyperHDR frames: 51 (FPS), receiv.: 51, good: 51, incompl.: 0, mem1: 0, mem2: 452, heap: 123232
' (191)
2024-10-26T17:50:36.883Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM1
2024-10-26T17:50:39.515Z [SMOOTHING0] Clearing queued colors before: disabling
2024-10-26T17:50:39.515Z [SMOOTHING0] Smoothing queue is cleared
2024-10-26T17:50:39.515Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:297) Disable the device
2024-10-26T17:50:39.515Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:381) Stopping refresh timer
2024-10-26T17:50:39.515Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:90) Switch off
2024-10-26T17:50:39.515Z [COMPONENTCTRL0] LED device: disabled
2024-10-26T17:50:42.193Z [SMOOTHING0] Clearing queued colors before: enabling
2024-10-26T17:50:42.194Z [SMOOTHING0] Smoothing queue is cleared
2024-10-26T17:50:42.194Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:247) Enable the device
2024-10-26T17:50:42.255Z [LEDDEVICE0_ADALIGHT] Serial port auto-discovery. Found serial port device: Pico (/dev/ttyACM1 => ttyACM1)
2024-10-26T17:50:42.255Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyACM1
2024-10-26T17:50:42.255Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyACM1, Baud rate [2000000]bps
2024-10-26T17:50:42.283Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyACM1
2024-10-26T17:50:42.283Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyACM1
2024-10-26T17:50:42.283Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description: Pico
2024-10-26T17:50:42.283Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer: Raspberry Pi
2024-10-26T17:50:42.283Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0xa
2024-10-26T17:50:42.283Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x2e8a
2024-10-26T17:50:42.283Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber: DF62585783634936
2024-10-26T17:50:42.286Z [LEDDEVICE0_ADALIGHT] Detected Rp2040 type board. HyperHDR skips the reset. State: 1, 1
2024-10-26T17:50:42.288Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 452, heap: 123232 Welcome! Awa driver 9.) at 1 msec
2024-10-26T17:50:42.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:64) Switch on
2024-10-26T17:50:42.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:140) Power On
2024-10-26T17:50:42.288Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:367) Starting timer with interval = 20ms
2024-10-26T17:50:42.288Z [COMPONENTCTRL0] LED device: enabled
2024-10-26T17:50:42.288Z [SMOOTHING0] Using alternative smoothing input (0)
2024-10-26T17:50:42.328Z [SMOOTHING0] Using alternative smoothing procedure (0)
2024-10-26T17:50:46.172Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.133
2024-10-26T17:51:17.022Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.133
2024-10-26T17:51:17.141Z [NET_DISCOVERY] Removing not responding ESP board at ttyUSB0:-1 (USB Serial)
2024-10-26T17:51:17.190Z [NET_DISCOVERY] Found Pico/RP2040 at ttyACM1:-1 (Pico)
2024-10-26T17:51:22.848Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.133
2024-10-26T17:51:35.324Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.133
2024-10-26T17:51:35.559Z [WEBSOCKET] (HyperAPI.cpp:1109) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":670}]
2024-10-26T17:51:35.605Z [WEBSOCKET] (HyperAPI.cpp:1133) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"Pico (/dev/ttyACM1)","value":"ttyACM1"}],"ledDeviceType":"adalight"}]
2024-10-26T17:51:45.328Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:286) Stop device
2024-10-26T17:51:45.328Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:381) Stopping refresh timer
2024-10-26T17:51:45.328Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:297) Disable the device
2024-10-26T17:51:45.328Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:90) Switch off
2024-10-26T17:51:45.328Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:544) Set LED strip to black/power off
2024-10-26T17:51:45.330Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
2024-10-26T17:51:45.341Z [LEDDEVICE0_ADALIGHT] Received goodbye: 'HyperHDR frames: 49 (FPS), receiv.: 50, good: 49, incompl.: 1, mem1: 0, mem2: 448, heap: 123232
' (97)
2024-10-26T17:51:45.348Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM1
2024-10-26T17:51:45.348Z [LEDDEVICE0_ADALIGHT] Stopped LedDevice 'adalight'
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] Start LedDevice 'adalight'.
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:337) deviceConfig: [{"awa_mode":true,"colorOrder":"rgb","currentLedCount":160,"espHandshake":true,"forceSerialDetection":false,"hardwareLedCount":null,"maxRetry":0,"output":"ttyACM1","rate":2000000,"refreshTime":20,"smoothingRefreshTime":20,"type":"adalight","white_channel_calibration":false}]
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] Ignoring user LED refresh rate. Forcing smoothing refresh rate = 50.00 Hz
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:423) Refresh rate = 50.00 Hz
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:373) Device is not ready to start a timer
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:433) Refresh interval updated to 20ms
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:50) DeviceType : adalight
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:51) LedCount : 160
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:52) RefreshTime : 20
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:67) Device name : ttyACM1
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:68) Auto selection: 0
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:69) Baud rate : 2000000
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:70) ESP handshake : ON
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:71) Force ESP/Pico Detection : OFF
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:72) Delayed open : 0
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:73) Retry limit : 0
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] The refresh timer is enabled ('Refresh time' > 0) and may limit the performance of the LED driver. Ignore this error if you set it on purpose for some reason (but you almost never need it).
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 160 leds: Awa 0x00 0x9f 0xca
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:247) Enable the device
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] Opening UART: ttyACM1
2024-10-26T17:51:45.349Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:209) _serialPort.open(QIODevice::ReadWrite): ttyACM1, Baud rate [2000000]bps
2024-10-26T17:51:45.352Z [COMPONENTCTRL0] LED device: disabled
2024-10-26T17:51:45.370Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:214) portName: ttyACM1
2024-10-26T17:51:45.370Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:215) systemLocation: /dev/ttyACM1
2024-10-26T17:51:45.370Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:216) description: Pico
2024-10-26T17:51:45.370Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:217) manufacturer: Raspberry Pi
2024-10-26T17:51:45.370Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:218) productIdentifier: 0xa
2024-10-26T17:51:45.370Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:219) vendorIdentifier: 0x2e8a
2024-10-26T17:51:45.370Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:220) serialNumber: DF62585783634936
2024-10-26T17:51:45.373Z [LEDDEVICE0_ADALIGHT] Detected Rp2040 type board. HyperHDR skips the reset. State: 1, 1
2024-10-26T17:51:45.375Z [LEDDEVICE0_ADALIGHT] ESP sent: 'HyperHDR frames: 0 (FPS), receiv.: 0, good: 0, incompl.: 0, mem1: 0, mem2: 448, heap: 123232'
2024-10-26T17:51:45.375Z [LEDDEVICE0_ADALIGHT] DETECTED DEVICE USING HyperSerialEsp8266/HyperSerialESP32/HyperSerialPico FIRMWARE (Welcome! Awa driver 9.) at 1 msec
2024-10-26T17:51:45.375Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:64) Switch on
2024-10-26T17:51:45.375Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:140) Power On
2024-10-26T17:51:45.375Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:367) Starting timer with interval = 20ms
2024-10-26T17:51:45.375Z [COMPONENTCTRL0] LED device: enabled
2024-10-26T17:51:59.848Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.133
2024-10-26T17:52:43.301Z [WEBSOCKET] (HyperAPI.cpp:966) log streaming deactivated for client ::ffff:192.168.0.133
2024-10-26T17:52:43.410Z [NET_DISCOVERY] Removing not responding Pico/RP2040 at ttyACM0:-1 (Pico)
2024-10-26T17:52:47.682Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 3ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3000], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-10-26T17:53:47.681Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 4ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 49.99, processed = 2999], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-10-26T17:54:47.686Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 3ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3001], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-10-26T17:55:47.683Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 3ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 2999], [LED0: FPS = 50.00, send = 3000, processed = 3000, dropped = 0]
2024-10-26T17:56:39.137Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 0 frames already dropped
2024-10-26T17:56:40.138Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 1 frames already dropped
2024-10-26T17:56:41.139Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 2 frames already dropped
2024-10-26T17:56:42.139Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 3 frames already dropped
2024-10-26T17:56:43.141Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 4 frames already dropped
2024-10-26T17:56:44.142Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 5 frames already dropped
2024-10-26T17:56:44.142Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
2024-10-26T17:56:54.777Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.133
2024-10-26T17:57:15.966Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM1
2024-10-26T17:57:15.966Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:381) Stopping refresh timer
2024-10-26T17:57:15.966Z [LEDDEVICE0_ADALIGHT] Device 'adalight' is disabled due to an error: 'Timeout writing data to ttyACM1'
2024-10-26T17:57:15.967Z [COMPONENTCTRL0] LED device: disabled
2024-10-26T17:57:47.685Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 2ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3000]
2024-10-26T17:58:47.670Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 2ms, frames = 2999, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3000]
2024-10-26T17:59:47.671Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 2ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3000]
One more log:
2024-10-26T19:42:24.106Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 0 frames already dropped
2024-10-26T19:42:25.107Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 1 frames already dropped
2024-10-26T19:42:26.109Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 2 frames already dropped
2024-10-26T19:42:27.110Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 3 frames already dropped
2024-10-26T19:42:28.111Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 4 frames already dropped
2024-10-26T19:42:29.111Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:293) Timeout after 1000ms: 5 frames already dropped
2024-10-26T19:42:29.112Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:146) Flush was successful
2024-10-26T19:43:00.668Z [LEDDEVICE0_ADALIGHT] (ProviderSerial.cpp:164) Serial port is closed: ttyACM0
2024-10-26T19:43:00.668Z [LEDDEVICE0_ADALIGHT] (LedDevice.cpp:381) Stopping refresh timer
2024-10-26T19:43:00.668Z [LEDDEVICE0_ADALIGHT] Device 'adalight' is disabled due to an error: 'Timeout writing data to ttyACM0'
2024-10-26T19:43:00.669Z [COMPONENTCTRL0] LED device: disabled
2024-10-26T19:43:12.106Z [WEBSOCKET] (WebSocketClient.cpp:39) New connection from ::ffff:192.168.0.133
2024-10-26T19:43:21.406Z [WEBSOCKET] (HyperAPI.cpp:957) log streaming activated for client ::ffff:192.168.0.133
2024-10-26T19:43:47.683Z [PERFORMANCE] [USB: FPS = 50.00, decoding = 3ms, frames = 3000, invalid = 0, mode = direct], [INSTANCE0: FPS = 50.00, processed = 3000]
I cannot reproduce the problem and in your logs I see all kinds of problem with the serial port: where did you try generic firmaware without the problems for a longer time? Beside what's your board/system/kernel version and which exactly firmware you used(release secton?)? Adafruit firmware only difference is different GPIO and workaround for boot which is just an increase of timeout when waiting for the board to be ready.
Problem started after I've changed USB2 grabber to the Elgato HD60x which is USB3. I've tried all different ports and configurations, but Scorpio still freezes and generic works without any problems.
Problem started after I've changed USB2 grabber to the Elgato HD60x which is USB3.
well, check your dmesg for any kind of warning and errors then. beside there are a lot of problems with the serial port on the latest kernel. Still I'm thinking that firmware version is not an issues but you can compile firmware for yourself using 'generic' (boot workaround disabled with changed gpio for scorpio).
6.6.31+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux
again...check your dmesg when the problem occurs. the circumstances when the problem appeared after changing the grabber to a high-current unit suggest that it lies somewhere else (power supply or its driver). besides, as I wrote, I do not see in the logs a place where the serial port works correctly even on 'generic' firmware
Adafruit Scorpio 2040 freezing after couple minutes. Tried generic adalight driver and its working without any problems. Logs: