search

awolf78 / KISS_OSD

(micro) minimOSD firmware for the KISS FC. With all the latest shenanigans.
https://www.youtube.com/watch?v=XR2UEFcM3bA
The Unlicense
51 stars 16 forks source link

Voltage reading from FC instead of OSD #21

Closed mkmitchell closed 7 years ago

mkmitchell commented 7 years ago

I use a reactor PDB/OSD that I prefer to use for voltage readings. My FC is a little messed up and only reads 5v instead of battery.

Is there any configuration to change the voltage to read from my OSD instead of the FC?

Thanks

awolf78 commented 7 years ago

I guess you are not using KISS 24RE ESCs either - otherwise it would use the voltage measurement of those instead of the (less accurate) reading from the FC. If that is the case, you better stick with MWOSD.

mkmitchell commented 7 years ago

Hmm. I am using the kiss 24a escs. I'm testing it today so I'll let you know what sort of readings I'm getting.

On Sat, Jul 8, 2017, 7:14 AM awolf78 notifications@github.com wrote:

I guess you are not using KISS 24RE ESCs either - otherwise it would use the voltage measurement of those instead of the (less accurate) reading from the FC. If that is the case, you better stick with MWOSD.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/awolf78/KISS_OSD/issues/21#issuecomment-313852489, or mute the thread https://github.com/notifications/unsubscribe-auth/AEyBTK5vpkLDKOZSekWrtZm4wauXTETnks5sL3KygaJpZM4ORmlB .

mkmitchell commented 7 years ago

I wasn't getting any ESC readings either. It very well may have been the messed up fc. I decided to just tear it all apart.