search

awolf78 / KISS_OSD

(micro) minimOSD firmware for the KISS FC. With all the latest shenanigans.
https://www.youtube.com/watch?v=XR2UEFcM3bA
The Unlicense
51 stars 16 forks source link

Issue with voltage correction (-) #26

Closed olivier0253 closed 7 years ago

olivier0253 commented 7 years ago

Hello,

I have (now) V2.4 RC4.3 and i meet issue when i want to make voltage correction. When i apply positive correction, it seems to be good However, when i apply negative one, it's run at first, but at next lipo, it's show me 42V at screen! (i run 4S) So, i go to VOLTAGE CORRECTION and the value has move to 25V (approwimately, denpending of negative value i apply on previous lipo) This issue occurs with kiss FC and CC.

Thanks for your job!

Olivier

awolf78 commented 7 years ago

Ok, this has not been very well tested, thank you for reporting. I will look into this probably on Thursday.

awolf78 commented 7 years ago

Try this one.

KISS_OSD.ino.standard.zip

olivier0253 commented 7 years ago

Thanks I'll test it asap, when i go back to home. One question before install... How i should to do? Like a basic firmware installation, with Xloader?

awolf78 commented 7 years ago

Yes

olivier0253 commented 7 years ago

I tried this file... Installation seems to be good with Xloader, but when i plug in the lipo, i have no more OSD :-(

awolf78 commented 7 years ago

What type of OSD hardware do you use?

olivier0253 commented 7 years ago

i use piggy osd v2, with a 470uF capacitor

awolf78 commented 7 years ago

KISS_OSD.ino.eightanaloginputs.zip

olivier0253 commented 7 years ago

New test, and it seems to works fine! Thanks once again!