search

awolf78 / KISS_OSD

(micro) minimOSD firmware for the KISS FC. With all the latest shenanigans.
https://www.youtube.com/watch?v=XR2UEFcM3bA
The Unlicense
50 stars 16 forks source link

All motors spinning in the same direction (right) #65

Open LoKKeR96 opened 4 years ago

LoKKeR96 commented 4 years ago

I have just configured my KISS FC V1 with KISS 25A ESC and they all spin in the same direction. No matter the protocol or the yaw configuration. What's going on?

fedorcomander commented 4 years ago

thats what they do. change it in esc flasher or solder jumper or swap 2 wires.

Cheers, Alex

On 28 Nov 2019, at 21:30, Lorenzo notifications@github.com wrote:

 I have just configured my KISS FC V1 with KISS 25A ESC and they all spin in the same direction. No matter the protocol or the yaw configuration. What's going on?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

LoKKeR96 commented 4 years ago

I soldered the jumper and that solved the problem but for some reasons on the kiss website (https://flyduino.gitbook.io/kiss-documentation/english-kiss-docu/kiss-esc-25a/esc-wiring-and-connections) it says: "This needs to be done only if you are NOT using DSHOT! " which kind of worries me. It is not very clear what they mean. If it's is bad or if you shouldn't need to do it.