USB 3 hangup during file transfer

klerai commented 6 years ago

During file transfer (rsync) over a powered USB 3 hub from sda to sdb, the kernel disconnects the USB channel after a few minutes. The board needs be rebooted.

The failure occurs with the first message in the kernel log (more details further down): Feb 26 14:26:30 r64omv kernel: core: dev_pm_opp_get_voltage: Invalid parameters

messages displayed on the terminal during rsync session:

Message from syslogd@r64omv at Feb 26 14:27:37 ... kernel:[ 1440.377657] Kernel panic - not syncing: hung_task: blocked tasks

Message from syslogd@r64omv at Feb 26 14:27:38 ... kernel:[ 1440.849084] Kernel Offset: disabled

Message from syslogd@r64omv at Feb 26 14:27:38 ... kernel:[ 1440.851529] Memory Limit: none
journalctl -k Feb 26 14:21:13 r64omv kernel: sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Feb 26 14:21:13 r64omv kernel: sdb: sdb1 Feb 26 14:21:13 r64omv kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk Feb 26 14:21:13 r64omv kernel: BTRFS: device label DATA devid 1 transid 23 /dev/sdb1 Feb 26 14:21:13 r64omv kernel: BTRFS info (device sdb1): disk space caching is enabled Feb 26 14:21:13 r64omv kernel: BTRFS: has skinny extents Feb 26 14:26:30 r64omv kernel: core: dev_pm_opp_get_voltage: Invalid parameters Feb 26 14:26:30 r64omv kernel: mali-utgard ff300000.gpu: Failed to get voltage for frequency 163840000: -34 Feb 26 14:26:30 r64omv kernel: devfreq ff300000.gpu: Couldn't update frequency transition information. Feb 26 14:28:05 r64omv kernel: xhci-hcd xhci-hcd.8.auto: xHCI host not responding to stop endpoint command. Feb 26 14:28:05 r64omv kernel: xhci-hcd xhci-hcd.8.auto: Assuming host is dying, halting host. Feb 26 14:28:05 r64omv kernel: xhci-hcd xhci-hcd.8.auto: xHCI host not responding to stop endpoint command. Feb 26 14:28:05 r64omv kernel: xhci-hcd xhci-hcd.8.auto: Assuming host is dying, halting host. Feb 26 14:28:05 r64omv kernel: xhci-hcd xhci-hcd.8.auto: Host not halted after 16000 microseconds. Feb 26 14:28:05 r64omv kernel: hub 5-1.1:1.0: hub_port_status failed (err = -22) Feb 26 14:28:05 r64omv kernel: xhci-hcd xhci-hcd.8.auto: HC died; cleaning up Feb 26 14:28:05 r64omv kernel: usb 5-1.1-port1: cannot reset (err = -22) Feb 26 14:28:05 r64omv kernel: usb 5-1.1-port1: cannot reset (err = -22) Feb 26 14:28:05 r64omv kernel: usb 5-1.1-port1: cannot reset (err = -22) Feb 26 14:28:05 r64omv kernel: usb 5-1.1-port1: cannot reset (err = -22) Feb 26 14:28:05 r64omv kernel: usb 5-1.1-port1: cannot reset (err = -22) Feb 26 14:28:05 r64omv kernel: usb 5-1.1-port1: Cannot enable. Maybe the USB cable is bad?

Linux-cpp-lisp commented 6 years ago

Can reproduce, having the same problem. Seems to only happen during periods of heavy writing; when I only run my read-heavy task things seem to be fine. I have two USB 3.0 hard drives on an unpowered hub attached to the USB 3.0 port on the Rock64. These errors make both of them malfunction, even though I'm only writing to one.

I've attached a more complete log, but I'm seeing many of the same error messages as @klerai above:

core: dev_pm_opp_get_voltage: Invalid parameters
[106534.429998] mali-utgard ff300000.gpu: Failed to get voltage for frequency 163840000: -34

Followed by some:

[107314.389632] usb 5-1-port1: cannot reset (err = -108)
[107314.389634] usb 5-1-port1: Cannot enable. Maybe the USB cable is bad?

And finally a large pile of Ext4 errors.

xalius commented 6 years ago

Have you eliminated power supply problems (also on the hub), the USB3 spec only allows up to 900mA per port...

Linux-cpp-lisp commented 6 years ago

I'm running three wall powered (have their own individual power supply) desktop hard drives off of an unpowered hub. I was under the impression that there wouldn't be any power draw (except for maybe the hub's status light), and that power wouldn't be the issue, but I'm no electrical engineer, so that may not be true.

It may also be relevant that, upon rebooting, one or two of the drives will often not be recognized as connected (i.e. don't show up in the output of sudo blkid), and have to be physically reattached to be recognized by the system.

klerai commented 6 years ago

The USB 3.0 power specs were taken in consideration. Beside the Rock board with its standard power adapter, my USB in use is powered by its own 4 A power supply.

All tests runs were duplicated on a Gigabyte BRX i5 desktop machine (flawlessly).

The following tests were executed

with a pair of 2.5" 4TB external Seagate disks (data volume around 1.6 TB).
one 2.5" 4TB external Seagate disk and 1 64GB USB flash drive
two 64 GB USB flash drive using rsync -av /srv/dev1/* /srv/dev2/

My initial work was done on the Rock64 with release 0.5.14: jenkins-linux-build-rock-64-133. - It ended with the errors reported in my first message. After I recognizing that a newer version 0.5.15: jenkins-linux-build-rock-64-136, which initially seemed to have solved the USB dropouts. I was able to run an initial backup from the first to the second Seagate disk. But sub sequential runs on modified content failed.

My experiences with other systems showed that USB dropouts of external disks are usually handled by the kernel as soon the sub-system becomes back online, while the hub stays online. But with the Rock64, the whole USB channel disappears no unplug or re-plugin helps. The board has to go through a complete reboot.

Below are my relevant kernel messages.

==== -- from boot-up... Apr 07 21:14:05 r64omv kernel: Linux version 4.4.77-rockchip-ayufan-136 (root@713b8312374e) .. Apr 07 21:14:05 r64omv kernel: Kernel command line: earlycon=uart8250,mmio32,0xff130000 rw root=LABEL=linux-root rootwait rootfstype=ext4 .. Apr 07 21:14:05 r64omv kernel: sched-energy: CPU device node has no sched-energy-costs Apr 07 21:14:05 r64omv kernel: Invalid sched_group_energy for CPU0 ... Apr 07 21:14:05 r64omv kernel: genirq: Setting trigger mode 8 for irq 176 failed (gic_set_type+0x0/0x68) .. Apr 07 21:14:05 r64omv kernel: rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru) Apr 07 21:14:05 r64omv kernel: rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low) .. Apr 07 21:14:05 r64omv systemd[1]: Failed to insert module 'autofs4' .. Apr 07 21:14:15 r64omv kernel: usb 5-1.1.1: New USB device found, idVendor=0bc2, idProduct=61b7 Apr 07 21:14:15 r64omv kernel: usb 5-1.1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 .. Apr 07 21:14:15 r64omv kernel: usb 5-1.1.1: UAS is blacklisted for this device, using usb-storage instead .. Apr 07 21:14:05 r64omv kernel: rockchip-thermal ff250000.tsadc: Missing tshut mode property, using default (cru) Apr 07 21:14:05 r64omv kernel: rockchip-thermal ff250000.tsadc: Missing tshut-polarity property, using default (low) .. Apr 07 21:14:05 r64omv systemd[1]: Failed to insert module 'autofs4'

================================================== ===> and this is the kernel log after the USB channel drops out Apr 7 15:10:46 r64omv kernel: [ 31.872062] rk_gmac-dwmac ff540000.eth eth0: Link is Up - 1Gbps/Full - flow control rx/tx Apr 7 16:28:08 r64omv kernel: [ 4655.943883] xhci-hcd xhci-hcd.8.auto: xHCI host not responding to stop endpoint command. Apr 7 16:28:08 r64omv kernel: [ 4655.944763] xhci-hcd xhci-hcd.8.auto: Assuming host is dying, halting host. Apr 7 16:28:08 r64omv kernel: [ 4655.945499] xhci-hcd xhci-hcd.8.auto: xHCI host not responding to stop endpoint command. Apr 7 16:28:08 r64omv kernel: [ 4655.946354] xhci-hcd xhci-hcd.8.auto: Assuming host is dying, halting host. Apr 7 16:28:08 r64omv kernel: [ 4655.968853] xhci-hcd xhci-hcd.8.auto: Host not halted after 16000 microseconds. Apr 7 16:28:08 r64omv kernel: [ 4655.969628] xhci-hcd xhci-hcd.8.auto: Non-responsive xHCI host is not halting. Apr 7 16:28:08 r64omv kernel: [ 4655.970388] xhci-hcd xhci-hcd.8.auto: Completing active URBs anyway. Apr 7 16:28:08 r64omv kernel: [ 4655.970436] xhci-hcd xhci-hcd.8.auto: Host not halted after 16000 microseconds. Apr 7 16:28:08 r64omv kernel: [ 4655.971836] xhci-hcd xhci-hcd.8.auto: Non-responsive xHCI host is not halting. Apr 7 16:28:08 r64omv kernel: [ 4655.972597] xhci-hcd xhci-hcd.8.auto: Completing active URBs anyway. Apr 7 16:28:08 r64omv kernel: [ 4655.973306] xhci-hcd xhci-hcd.8.auto: HC died; cleaning up Apr 7 16:28:08 r64omv kernel: [ 4655.973311] xhci-hcd xhci-hcd.8.auto: HC died; cleaning up Apr 7 16:28:08 r64omv kernel: [ 4655.973346] hub 5-1.1:1.0: hub_port_status failed (err = -108) Apr 7 16:28:08 r64omv kernel: [ 4655.973401] usb 5-1.1.1: USB disconnect, device number 4 Apr 7 16:28:08 r64omv kernel: [ 4655.978022] usb 4-1: USB disconnect, device number 6 Apr 7 16:28:08 r64omv kernel: [ 4655.978579] usb 4-1.1: USB disconnect, device number 7 Apr 7 16:28:08 r64omv kernel: [ 4655.980772] usb 5-1: USB disconnect, device number 2 Apr 7 16:28:08 r64omv kernel: [ 4655.981408] usb 5-1.1: USB disconnect, device number 3 Apr 7 16:28:08 r64omv kernel: [ 4655.981929] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 Apr 7 16:28:08 r64omv kernel: [ 4655.981937] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x88 88 00 00 00 00 00 6e 7c 26 00 00 00 00 f0 00 00

Linux-cpp-lisp commented 6 years ago

It's also quite clear that this issue is specifically ties to disk writes: I mounted the same disks as read-only and have been running a read-intensive workload for at least a week now without issue. When I run the same read-intensive workload but mount the disks RW, the issue occurs after a few days, I'm assuming as a result of the constant updating of atimes.

If I run a write-intensive load on the same disks, I get this issue within hours if not minutes.

PeterPlatt commented 6 years ago

Same problem here. I'm trying to switch to the USB 2.0 port to see if it helps. System hangs when there are heavy writes to the external drive.

marcosscriven commented 6 years ago

Just came to report the same issue - this time by hitting two USB3 ethernet adapters at the same time (with connection bonding software). I'll try another hub, but there's too many reports both on this issue, and this forum post https://forum.pine64.org/showthread.php?tid=5557 to suggest it's anything other than the Rock64 at fault here.

Linux-cpp-lisp commented 6 years ago

Can confirm (again) that this has happened many more times with moderately heavy USB 3.0 I/O -- I was actually forced to stop using the Rock64 since it couldn't run my workload without failing.

On Sat, Jun 16, 2018, 4:56 PM Marcos Scriven notifications@github.com wrote:

Just came to report the same issue - this time by hitting two USB3 ethernet adapters at the same time (with connection bonding software). I'll try another hub, but there's too many reports both on this issue, and this forum post https://forum.pine64.org/showthread.php?tid=5557 to suggest it's anything other than the Rock64 at fault here.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ayufan-rock64/linux-build/issues/112#issuecomment-397817650, or mute the thread https://github.com/notifications/unsubscribe-auth/ABZ8bF-UuXEdcAFCTLOOt5PRqcusW1K5ks5t9Ry0gaJpZM4STaMx .

stevefan1999-personal commented 6 years ago

Can confirm. Just yesterday my Rock64 halted but I have no logs available because my system was booted from an external USB3 HDD, so presumably, USB3 is the problem of my random freezes. I used to reproduce this behavior by setting my APM and AAM to the best performant option possible (and hence power-hungry), maybe I triggered the polyfuse or some other protection mechanism that I'm unaware of? Or is it the temp sensor detected an anomaly so it just went off without leaving any logs for me...

Thankfully there are no bad blocks. The system has ran without trouble for a week before. If this keeps going on how am I going to keep this R64 for my NAS solution?

EDIT: It happened again 30 minutes ago. I was under both frequent reads and writes that I have BitTorrent and Plex running alongside each other. Too bad I hadn't got a spare and long enough USB cable to see what happened. That's why you shouldn't put a headless server around your router only.

EDIT 2: Just realized the absense of logs are pretty reasonable to be caused by folder2ram, so the logs are discarded in memory when I forcefully reboots. Gotta see something interesting in the dmesg after removing folder2ram if the USB hell ever happened again.

EDIT 3: Nope, nothing special beside the spamming of this line during the USB hang up:

Jul 15 14:46:07 nas kernel: [59526.130023] rockchip-sip: function[82000008]: args:[2,0,2] => res:[0,2ed96880,0,0]
Jul 15 14:46:07 nas kernel: [59526.131809] rockchip-sip: function[82000008]: args:[2,0,2] => res:[0,2ed96880,0,0]
Jul 15 14:46:07 nas kernel: [59526.152878] rockchip-sip: function[82000008]: args:[2,0,2] => res:[0,2ed96880,0,0]
Jul 15 14:46:07 nas kernel: [59526.154704] rockchip-sip: function[82000008]: args:[2,0,2] => res:[0,2ed96880,0,0]
Jul 15 14:46:07 nas kernel: [59526.215919] rockchip-sip: function[82000008]: args:[2,0,2] => res:[0,2ed96880,0,0]
...

So yeah I think I tripped the USB3 chipset, it has some flaws in it.

Redwid commented 6 years ago

The same for me. Two 2.5" disks connected to usb 3.0 powered hub. On rsync data from one to another - disks disconnects. No way to return them back, only reboot helps. I'm on 4.4.126-rockchip-ayufan-239.

ayufan commented 6 years ago

Can you check if the same happens on 0.5.15?

Kamil

On Mon, Jul 16, 2018 at 11:33 AM, Redwid notifications@github.com wrote:

The same for me. Two 2.5" disks connected to usb 3.0 powered hub. On rsync data from one to another - disks disconnects. No way to return them back, only reboot helps. I'm on 4.4.126-rockchip-ayufan-239.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/ayufan-rock64/linux-build/issues/112#issuecomment-405193763, or mute the thread https://github.com/notifications/unsubscribe-auth/ACTpQZSNzeh-NwRxUB_ec6dWqG_NjwBrks5uHF32gaJpZM4STaMx .

Redwid commented 6 years ago

Thanks ayufan, I'll try in the evening. Is that 0.5.15, right? https://github.com/ayufan-rock64/linux-build/releases/tag/0.5.15

ayufan commented 6 years ago

Yes

On Mon, Jul 16, 2018 at 11:49 AM, Redwid notifications@github.com wrote:

Thanks ayufan, I'll try in the evening. Is that 0.5..15, right? https://github.com/ayufan-rock64/linux-build/releases/tag/0.5.15

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ayufan-rock64/linux-build/issues/112#issuecomment-405197478, or mute the thread https://github.com/notifications/unsubscribe-auth/ACTpQTpAvjpv9AvZQVHqMvfmPQdJ5aE_ks5uHGGxgaJpZM4STaMx .

Redwid commented 6 years ago

The same result for jessie-openmediavault-rock64-0.5.15-136-armhf.img.xz All usb disk are gone after copying about 7Gb of files.

[    1.962239] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    1.970443] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[    1.978738] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00210010
[    1.987008] xhci-hcd xhci-hcd.8.auto: irq 180, io mem 0xff600000
[    2.019606] usb usb4: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[    2.027901] usb usb4: SerialNumber: xhci-hcd.8.auto
[    2.053603] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    2.062301] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
[    2.105026] usb usb5: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[    2.113525] usb usb5: SerialNumber: xhci-hcd.8.auto
[    2.367992] usb 4-1: new high-speed USB device number 2 using xhci-hcd
[    2.650176] usb 5-1: new SuperSpeed USB device number 2 using xhci-hcd
[    3.107050] usb 5-1.2: new SuperSpeed USB device number 3 using xhci-hcd
[    3.215063] usb 5-1.3: new SuperSpeed USB device number 4 using xhci-hcd
[  538.069919] usb 5-1.3: new SuperSpeed USB device number 5 using xhci-hcd
[  538.333933] usb 5-1.1: new SuperSpeed USB device number 6 using xhci-hcd
[  915.868847] xhci-hcd xhci-hcd.8.auto: xHCI host not responding to stop endpoint command.
[  915.873804] xhci-hcd xhci-hcd.8.auto: Assuming host is dying, halting host.
[  915.878549] xhci-hcd xhci-hcd.8.auto: xHCI host not responding to stop endpoint command.
[  915.883450] xhci-hcd xhci-hcd.8.auto: Assuming host is dying, halting host.
[  915.901904] xhci-hcd xhci-hcd.8.auto: Host not halted after 16000 microseconds.
[  915.905494] xhci-hcd xhci-hcd.8.auto: HC died; cleaning up
[  916.342611] xhci-hcd xhci-hcd.8.auto: Non-responsive xHCI host is not halting.
[  916.348589] xhci-hcd xhci-hcd.8.auto: Completing active URBs anyway.
[  916.354428] xhci-hcd xhci-hcd.8.auto: HC died; cleaning up```

```root@rock64:~# dmesg | grep "usb"
[    0.587825] usbcore: registered new interface driver usbfs
[    0.588430] usbcore: registered new interface driver hub
[    0.589038] usbcore: registered new device driver usb
[    1.106062] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply from device tree
[    1.106083] phy phy-ff450000.syscon:usb2-phy@100.0: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/host-port failed
[    1.106614] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply from device tree
[    1.106634] phy phy-ff450000.syscon:usb2-phy@100.1: Looking up phy-supply property in node /syscon@ff450000/usb2-phy@100/otg-port failed
[    1.107150] rockchip-usb2phy ff450000.syscon:usb2-phy@100: GPIO lookup for consumer otg-vbus
[    1.107166] rockchip-usb2phy ff450000.syscon:usb2-phy@100: using device tree for GPIO lookup
[    1.107209] of_get_named_gpiod_flags: parsed 'otg-vbus-gpios' property of node '/syscon@ff450000/usb2-phy@100[0]' - status (0)
[    1.107958] rockchip-u3phy ff470000.usb3-phy: GPIO lookup for consumer vbus-drv
[    1.107975] rockchip-u3phy ff470000.usb3-phy: using device tree for GPIO lookup
[    1.108007] of_get_named_gpiod_flags: parsed 'vbus-drv-gpios' property of node '/usb3-phy@ff470000[0]' - status (0)
[    1.108402] phy phy-ff470000.usb3-phy.2: Looking up phy-supply from device tree
[    1.108421] phy phy-ff470000.usb3-phy.2: Looking up phy-supply property in node /usb3-phy@ff470000/utmi@ff470000 failed
[    1.108918] phy phy-ff470000.usb3-phy.3: Looking up phy-supply from device tree
[    1.108937] phy phy-ff470000.usb3-phy.3: Looking up phy-supply property in node /usb3-phy@ff470000/pipe@ff478000 failed
[    1.110685] rockchip-u3phy ff470000.usb3-phy: Rockchip u3phy initialized successfully
[    1.426222] usbcore: registered new interface driver cdc_ether
[    1.434287] usbcore: registered new interface driver rndis_host
[    1.443898] phy phy-ff470000.usb3-phy.2: u3phy u2 power on
[    1.451610] phy phy-ff470000.usb3-phy.3: u3phy u3 power on
[    1.460065] dwc2 ff580000.usb: Looking up vusb_d-supply from device tree
[    1.460086] dwc2 ff580000.usb: Looking up vusb_d-supply property in node /usb@ff580000 failed
[    1.460103] ff580000.usb supply vusb_d not found, using dummy regulator
[    1.467685] dwc2 ff580000.usb: Looking up vusb_a-supply from device tree
[    1.467704] dwc2 ff580000.usb: Looking up vusb_a-supply property in node /usb@ff580000 failed
[    1.467718] ff580000.usb supply vusb_a not found, using dummy regulator
[    1.631113] dwc2 ff580000.usb: DWC OTG Controller
[    1.638195] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[    1.645471] dwc2 ff580000.usb: irq 40, io mem 0x00000000
[    1.652794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.659977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.667109] usb usb1: Product: DWC OTG Controller
[    1.673885] usb usb1: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 dwc2_hsotg
[    1.680967] usb usb1: SerialNumber: ff580000.usb
[    1.726426] ehci-platform ff5c0000.usb: EHCI Host Controller
[    1.733479] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[    1.740833] ehci-platform ff5c0000.usb: irq 41, io mem 0xff5c0000
[    1.752897] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[    1.760152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.767153] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.774178] usb usb2: Product: EHCI Host Controller
[    1.781056] usb usb2: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ehci_hcd
[    1.788330] usb usb2: SerialNumber: ff5c0000.usb
[    1.826658] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[    1.834615] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[    1.842595] ohci-platform ff5d0000.usb: irq 42, io mem 0xff5d0000
[    1.905175] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.913039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.920937] usb usb3: Product: Generic Platform OHCI controller
[    1.928730] usb usb3: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 ohci_hcd
[    1.936725] usb usb3: SerialNumber: ff5d0000.usb
[    1.995280] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.003420] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.011587] usb usb4: Product: xHCI Host Controller
[    2.019606] usb usb4: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[    2.027901] usb usb4: SerialNumber: xhci-hcd.8.auto
[    2.070960] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.079784] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[    2.088269] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.096794] usb usb5: Product: xHCI Host Controller
[    2.105026] usb usb5: Manufacturer: Linux 4.4.77-rockchip-ayufan-136 xhci-hcd
[    2.113525] usb usb5: SerialNumber: xhci-hcd.8.auto
[    2.141273] usbcore: registered new interface driver usbtouchscreen
[    2.321148] usbcore: registered new interface driver uvcvideo
[    2.367992] usb 4-1: new high-speed USB device number 2 using xhci-hcd
[    2.416998] usbcore: registered new interface driver bfusb
[    2.424928] usbcore: registered new interface driver btusb
[    2.552225] usb 4-1: New USB device found, idVendor=05e3, idProduct=0610
[    2.552230] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.552233] usb 4-1: Product: USB2.0 Hub
[    2.552237] usb 4-1: Manufacturer: GenesysLogic
[    2.613522] of_get_named_gpiod_flags: parsed 'gpios' property of node '/switches/usb-switch[0]' - status (0)
[    2.625722] usbcore: registered new interface driver usbhid
[    2.631459] usbhid: USB HID core driver
[    2.637485] usbcore: registered new interface driver snd-usb-audio
[    2.650176] usb 5-1: new SuperSpeed USB device number 2 using xhci-hcd
[    2.813900] usb 5-1: New USB device found, idVendor=05e3, idProduct=0616
[    2.813905] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.813909] usb 5-1: Product: USB3.0 Hub
[    2.813913] usb 5-1: Manufacturer: GenesysLogic
[    3.107050] usb 5-1.2: new SuperSpeed USB device number 3 using xhci-hcd
[    3.123152] usb 5-1.2: New USB device found, idVendor=0bc2, idProduct=ab26
[    3.128511] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.133802] usb 5-1.2: Product: BUP Slim BK
[    3.138675] usb 5-1.2: Manufacturer: Seagate
[    3.143560] usb 5-1.2: SerialNumber: NA97MBXT
[    3.215063] usb 5-1.3: new SuperSpeed USB device number 4 using xhci-hcd
[    3.230707] usb 5-1.3: New USB device found, idVendor=2537, idProduct=1068
[    3.234948] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.239215] usb 5-1.3: Product: NS1068
[    3.243131] usb 5-1.3: Manufacturer: Norelsys
[    3.247138] usb 5-1.3: SerialNumber: 0123456789ABCDE
[    3.256436] usb 5-1.2: UAS is blacklisted for this device, using usb-storage instead
[    3.260745] usb-storage 5-1.2:1.0: USB Mass Storage device detected
[    3.265693] usb-storage 5-1.2:1.0: Quirks match for vid 0bc2 pid ab26: 800000
[    3.270094] scsi host0: usb-storage 5-1.2:1.0
[    3.274550] usb 5-1.3: UAS is blacklisted for this device, using usb-storage instead
[    3.279016] usb-storage 5-1.3:1.0: USB Mass Storage device detected
[    3.283643] usb-storage 5-1.3:1.0: Quirks match for vid 2537 pid 1068: 800000
[    3.288222] scsi host1: usb-storage 5-1.3:1.0
[    3.292872] usbcore: registered new interface driver usb-storage
[    3.298157] usbcore: registered new interface driver uas
[    3.871933] usb 1-1: new high-speed USB device number 2 using dwc2
[    4.338793] usb 1-1: New USB device found, idVendor=0bc2, idProduct=ab26
[    4.338800] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.338805] usb 1-1: Product: BUP Slim RD
[    4.338810] usb 1-1: Manufacturer: Seagate
[    4.338814] usb 1-1: SerialNumber: NA9JK89E
[    4.339752] usb 1-1: UAS is blacklisted for this device, using usb-storage instead
[    4.339760] usb-storage 1-1:1.0: USB Mass Storage device detected
[    4.375079] usb-storage 1-1:1.0: Quirks match for vid 0bc2 pid ab26: 800000
[    4.380152] scsi host2: usb-storage 1-1:1.0
[  533.797163] usb 1-1: USB disconnect, device number 2
[  537.799553] usb 5-1.3: USB disconnect, device number 4
[  538.069919] usb 5-1.3: new SuperSpeed USB device number 5 using xhci-hcd
[  538.081470] usb 5-1.3: New USB device found, idVendor=2537, idProduct=1068
[  538.082230] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  538.083040] usb 5-1.3: Product: NS1068
[  538.083451] usb 5-1.3: Manufacturer: Norelsys
[  538.083942] usb 5-1.3: SerialNumber: 0123456789ABCDE
[  538.085325] usb 5-1.3: UAS is blacklisted for this device, using usb-storage instead
[  538.086179] usb-storage 5-1.3:1.0: USB Mass Storage device detected
[  538.087626] usb-storage 5-1.3:1.0: Quirks match for vid 2537 pid 1068: 800000
[  538.089073] scsi host3: usb-storage 5-1.3:1.0
[  538.333933] usb 5-1.1: new SuperSpeed USB device number 6 using xhci-hcd
[  538.346007] usb 5-1.1: New USB device found, idVendor=0bc2, idProduct=ab26
[  538.346752] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  538.347553] usb 5-1.1: Product: BUP Slim RD
[  538.348032] usb 5-1.1: Manufacturer: Seagate
[  538.348490] usb 5-1.1: SerialNumber: NA9JK89E
[  538.349801] usb 5-1.1: UAS is blacklisted for this device, using usb-storage instead
[  538.350682] usb-storage 5-1.1:1.0: USB Mass Storage device detected
[  538.351975] usb-storage 5-1.1:1.0: Quirks match for vid 0bc2 pid ab26: 800000
[  538.352791] scsi host4: usb-storage 5-1.1:1.0
[  915.905561] usb 5-1.1: USB disconnect, device number 6
[  915.905600] usb 4-1: USB disconnect, device number 2
[  915.906698] usb 5-1: USB disconnect, device number 2
[  918.129776] usb 5-1.2: USB disconnect, device number 3
[  919.322503] usb 5-1.3: USB disconnect, device number 5

Redwid commented 6 years ago

The same result on latest armbian firmware. But in general it allows me to copy more (>100Gb) that ayufan's ones :(

ayufan commented 6 years ago

What do you see when USB3 drops?

Redwid commented 6 years ago

Just nothing, no disks at all. I'm doing rsync copy of urbackup data from one disk to another.

ShapeShifter499 commented 6 years ago

I'm seeing this issue here. I reported it to https://github.com/m01/rock64-arch-linux-build/issues/2 and to https://archlinuxarm.org/forum/viewtopic.php?p=58934#p58934

I'm using a powered USB 3.0 hub from Amazon. All three hard drives connected stop working, it appears the controller runs into issues and stops working. I have two laptop external drives and one desktop external drive that has it's own separate power apart from the USB hub power.

EDIT: Running Arch Linux ARM with linux-aarch64-rc kernel package

[Jul29 18:07] usb 5-1.3: reset SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[Jul29 18:17] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[Jul29 18:32] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[  +0.030627] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  +0.000737] sd 0:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 00 c8 80 5e 10 00 00 00 f8 00 00
[  +0.000775] print_req_error: I/O error, dev sdb, sector 3363855888
[Jul29 18:37] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[  +0.030621] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[  +0.000737] sd 0:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 00 fd 80 1e 18 00 00 00 e8 00 00
[  +0.000775] print_req_error: I/O error, dev sdb, sector 4253031960
[Jul29 18:45] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[Jul29 18:51] usb 5-1.3: reset SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[Jul29 19:50] usb 5-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[Jul29 19:51] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  +0.000722] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
[  +0.000768] hub 5-1:1.0: hub_ext_port_status failed (err = -22)
[  +0.000033] usb 5-1.4: cmd cmplt err -108
[  +0.000491] usb 5-1-port2: cannot reset (err = -22)
[  +0.000348] usb 5-1.4: cmd cmplt err -108
[  +0.000423] usb 5-1-port2: cannot reset (err = -22)
[  +0.000353] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
[  +0.000420] usb 5-1-port2: cannot reset (err = -22)
[  +0.000518] usb 4-1: USB disconnect, device number 2
[  +0.000410] usb 5-1.2: USB disconnect, device number 3
[  +0.001351] usb 5-1: USB disconnect, device number 2
[  +0.001152] sd 0:0:0:0: [sdb] Synchronizing SCSI cache
[  +0.003028] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
[  +0.020067] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  +0.000774] sd 0:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 01 72 5f 58 00 00 00 01 00 00 00
[  +0.000775] print_req_error: I/O error, dev sdb, sector 6213818368
[  +0.000652] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  +0.000775] sd 0:0:0:0: [sdb] tag#0 CDB: Write(16) 8a 00 00 00 00 01 71 e1 19 00 00 00 01 00 00 00
[  +0.000786] print_req_error: I/O error, dev sdb, sector 6205544704
[  +0.000568] EXT4-fs warning (device dm-1): ext4_end_bio:323: I/O error 10 writing to inode 21307152 (offset 536477696 size 131072 starting block 775692320)
[  +0.000491] EXT4-fs warning (device dm-1): ext4_end_bio:323: I/O error 10 writing to inode 21307152 (offset 144703488 size 131072 starting block 775593248)
[  +0.000728] Buffer I/O error on device dm-1, logical block 775692320
[  +0.000017] Buffer I/O error on device dm-1, logical block 775692321
[  +0.001208] Buffer I/O error on device dm-1, logical block 775593248
[  +0.000550] Buffer I/O error on device dm-1, logical block 775692322
[  +0.000556] Buffer I/O error on device dm-1, logical block 775593249
[  +0.000547] Buffer I/O error on device dm-1, logical block 775692323
[  +0.000551] Buffer I/O error on device dm-1, logical block 775593250
[  +0.000551] Buffer I/O error on device dm-1, logical block 775692324
[  +0.000594] Buffer I/O error on device dm-1, logical block 775593251
[  +0.000551] Buffer I/O error on device dm-1, logical block 775692325

ShapeShifter499 commented 6 years ago

I have since switched back to USB 2.0, it's slower but I have yet to run into any crashing.

EDIT: Since switching back to using the USB 2.0 ports I noticed some errors about my luks encrypted USB hard drives being misaligned has gone away.

Redwid commented 6 years ago

I do have this set up: usb 3.0 -> powered usb 3.0 hub -> 2 usb disks By running rsync from one disk to another, all disks gone after about 5-10 minutes.

If I do that connection: usb 3.0 -> powered usb 3.0 hub -> usb disk #1 usb 2.0 -> usb disk #2 Than, doing rsync from disk #1 to disk #2 everything works fine. I do have a big set of urbackup data (more than 500Gb). Sync finished successfully after 24 hours. All disks still available.

I've used this hub and power supply before in my other single board NAS (banana pi pro). The board able to handle 4 disks simultaneously at that time.

ShapeShifter499 commented 6 years ago

I switched my USB hub out for a "Anker 10 Port 60W Data Hub with 7 USB 3.0 Ports and 3 PowerIQ Charging Ports"

Now I cannot even mount any drives or do anything USB with that hub attached. Below is the log from dmesg.

[root@kumo boot]# dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.18.0-rc7-2-ARCH (builduser@leming) (gcc version 8.1.1 20180531 (GCC)) #1 SMP Mon Jul 30 18:05:51 MDT 2018
[    0.000000] Machine model: Pine64 Rock64
[    0.000000] earlycon: uart8250 at MMIO32 0x00000000ff130000 (options '')
[    0.000000] bootconsole [uart8250] enabled
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x00000000f7c00000
[    0.000000] On node 0 totalpages: 1043968
[    0.000000]   DMA32 zone: 16312 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 1043968 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] random: get_random_bytes called from start_kernel+0x9c/0x45c with crng_init=0
[    0.000000] percpu: Embedded 24 pages/cpu @(____ptrval____) s59672 r8192 d30440 u98304
[    0.000000] pcpu-alloc: s59672 r8192 d30440 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1027656
[    0.000000] Kernel command line: console=ttyS2,1500000 rw rootwait usbcore.autosuspend=-1 earlycon=uart8250,mmio32,0xff130000
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3996084K/4175872K available (13116K kernel code, 2458K rwdata, 8440K rodata, 1600K init, 762K bss, 114252K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 47133 entries in 185 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] rockchip_mmc_get_phase: invalid clk rate
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001737] Console: colour dummy device 80x25
[    0.002186] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.003171] pid_max: default: 32768 minimum: 301
[    0.003795] Security Framework initialized
[    0.004190] Yama: becoming mindful.
[    0.004622] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005277] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.007783] ASID allocator initialised with 32768 entries
[    0.008468] Hierarchical SRCU implementation.
[    0.013256] EFI services will not be available.
[    0.014181] smp: Bringing up secondary CPUs ...
[    0.015316] Detected VIPT I-cache on CPU1
[    0.015380] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.016180] Detected VIPT I-cache on CPU2
[    0.016237] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.017021] Detected VIPT I-cache on CPU3
[    0.017074] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.017193] smp: Brought up 1 node, 4 CPUs
[    0.020622] SMP: Total of 4 processors activated.
[    0.021073] CPU features: detected: 32-bit EL0 Support
[    0.025871] CPU: All CPU(s) started at EL2
[    0.026283] alternatives: patching kernel code
[    0.029259] devtmpfs: initialized
[    0.038908] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.039853] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.043542] pinctrl core: initialized pinctrl subsystem
[    0.045205] DMI not present or invalid.
[    0.046114] NET: Registered protocol family 16
[    0.048479] cpuidle: using governor ladder
[    0.049056] cpuidle: using governor menu
[    0.049820] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.050527] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.052667] DMA: preallocated 256 KiB pool for atomic allocations
[    0.053831] Serial: AMBA PL011 UART driver
[    0.085164] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.086178] cryptd: max_cpu_qlen set to 1000
[    0.087404] ACPI: Interpreter disabled.
[    0.090075] vgaarb: loaded
[    0.091361] SCSI subsystem initialized
[    0.091999] libata version 3.00 loaded.
[    0.092303] usbcore: registered new interface driver usbfs
[    0.092882] usbcore: registered new interface driver hub
[    0.093489] usbcore: registered new device driver usb
[    0.094449] pps_core: LinuxPPS API ver. 1 registered
[    0.094922] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.095800] PTP clock support registered
[    0.096430] EDAC MC: Ver: 3.0.0
[    0.097766] Advanced Linux Sound Architecture Driver Initialized.
[    0.098936] NetLabel: Initializing
[    0.099267] NetLabel:  domain hash size = 128
[    0.099680] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.100291] NetLabel:  unlabeled traffic allowed by default
[    0.101275] clocksource: Switched to clocksource arch_sys_counter
[    0.240476] VFS: Disk quotas dquot_6.6.0
[    0.240931] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.242018] pnp: PnP ACPI: disabled
[    0.251792] NET: Registered protocol family 2
[    0.252901] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.253726] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.254804] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.256157] TCP: Hash tables configured (established 32768 bind 32768)
[    0.256933] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.257647] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.258710] NET: Registered protocol family 1
[    0.259821] RPC: Registered named UNIX socket transport module.
[    0.260389] RPC: Registered udp transport module.
[    0.260838] RPC: Registered tcp transport module.
[    0.261321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.261938] PCI: CLS 0 bytes, default 64
[    0.262147] Unpacking initramfs...
[    1.542205] Freeing initrd memory: 15456K
[    1.543710] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.544709] kvm [1]: 8-bit VMID
[    1.547054] kvm [1]: vgic interrupt IRQ1
[    1.547591] kvm [1]: Hyp mode initialized successfully
[    1.680462] Initialise system trusted keyrings
[    1.681076] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    1.689233] zbud: loaded
[    1.692608] NFS: Registering the id_resolver key type
[    1.693115] Key type id_resolver registered
[    1.693515] Key type id_legacy registered
[    1.693908] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.694755] SGI XFS with ACLs, security attributes, no debug enabled
[    1.698244] pstore: using deflate compression
[    3.882290] NET: Registered protocol family 38
[    3.882730] Key type asymmetric registered
[    3.883123] Asymmetric key parser 'x509' registered
[    3.883688] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    3.884565] io scheduler noop registered
[    3.884943] io scheduler deadline registered
[    3.885680] io scheduler cfq registered (default)
[    3.886130] io scheduler mq-deadline registered
[    3.886564] io scheduler kyber registered
[    3.887100] io scheduler bfq registered
[    3.895012] ipmi message handler version 39.2
[    3.900676] dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
[    3.901388] dma-pl330 ff1f0000.dmac:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    3.905948] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.909068] console [ttyS2] disabled
[    3.909473] ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 12, base_baud = 1500000) is a 16550A
[    3.910366] console [ttyS2] enabled
[    3.911021] bootconsole [uart8250] disabled
[    3.912924] msm_serial: driver initialized
[    3.919317] libphy: Fixed MDIO Bus: probed
[    3.921508] dwc3 ff600000.dwc3: Failed to get clk 'ref': -2
[    3.923388] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
[    3.924207] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
[    3.937649] dwc2 ff580000.usb: DWC OTG Controller
[    3.938098] dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
[    3.938756] dwc2 ff580000.usb: irq 26, io mem 0xff580000
[    3.939500] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    3.940232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.940870] usb usb1: Product: DWC OTG Controller
[    3.941356] usb usb1: Manufacturer: Linux 4.18.0-rc7-2-ARCH dwc2_hsotg
[    3.941935] usb usb1: SerialNumber: ff580000.usb
[    3.942937] hub 1-0:1.0: USB hub found
[    3.943311] hub 1-0:1.0: 1 port detected
[    3.945013] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.945605] ehci-pci: EHCI PCI platform driver
[    3.946057] ehci-platform: EHCI generic platform driver
[    3.948891] ehci-platform ff5c0000.usb: EHCI Host Controller
[    3.949621] ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
[    3.950657] ehci-platform ff5c0000.usb: irq 27, io mem 0xff5c0000
[    3.971300] ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
[    3.972118] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    3.972849] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.973487] usb usb2: Product: EHCI Host Controller
[    3.973923] usb usb2: Manufacturer: Linux 4.18.0-rc7-2-ARCH ehci_hcd
[    3.974485] usb usb2: SerialNumber: ff5c0000.usb
[    3.975460] hub 2-0:1.0: USB hub found
[    3.975831] hub 2-0:1.0: 1 port detected
[    3.976686] ehci-orion: EHCI orion driver
[    3.977227] tegra-ehci: Tegra EHCI driver
[    3.977694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.978261] ohci-pci: OHCI PCI platform driver
[    3.978735] ohci-platform: OHCI generic platform driver
[    3.979464] ohci-platform ff5d0000.usb: Generic Platform OHCI controller
[    3.980275] ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
[    3.981235] ohci-platform ff5d0000.usb: irq 28, io mem 0xff5d0000
[    4.055533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    4.056267] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.056906] usb usb3: Product: Generic Platform OHCI controller
[    4.057432] usb usb3: Manufacturer: Linux 4.18.0-rc7-2-ARCH ohci_hcd
[    4.057995] usb usb3: SerialNumber: ff5d0000.usb
[    4.059024] hub 3-0:1.0: USB hub found
[    4.059398] hub 3-0:1.0: 1 port detected
[    4.060221] uhci_hcd: USB Universal Host Controller Interface driver
[    4.061409] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.062124] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 4
[    4.063382] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    4.064265] xhci-hcd xhci-hcd.0.auto: irq 162, io mem 0xff600000
[    4.065209] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    4.065941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.066579] usb usb4: Product: xHCI Host Controller
[    4.067013] usb usb4: Manufacturer: Linux 4.18.0-rc7-2-ARCH xhci-hcd
[    4.067576] usb usb4: SerialNumber: xhci-hcd.0.auto
[    4.068619] hub 4-0:1.0: USB hub found
[    4.069000] hub 4-0:1.0: 1 port detected
[    4.069741] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.070437] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    4.071127] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    4.071837] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.072699] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    4.073429] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.074066] usb usb5: Product: xHCI Host Controller
[    4.074501] usb usb5: Manufacturer: Linux 4.18.0-rc7-2-ARCH xhci-hcd
[    4.075063] usb usb5: SerialNumber: xhci-hcd.0.auto
[    4.076064] hub 5-0:1.0: USB hub found
[    4.076437] hub 5-0:1.0: 1 port detected
[    4.077654] usbcore: registered new interface driver uas
[    4.078310] usbcore: registered new interface driver usb-storage
[    4.078881] usbcore: registered new interface driver ums-alauda
[    4.079443] usbcore: registered new interface driver ums-cypress
[    4.080014] usbcore: registered new interface driver ums-datafab
[    4.080581] usbcore: registered new interface driver ums_eneub6250
[    4.081169] usbcore: registered new interface driver ums-freecom
[    4.081775] usbcore: registered new interface driver ums-isd200
[    4.082339] usbcore: registered new interface driver ums-jumpshot
[    4.082916] usbcore: registered new interface driver ums-karma
[    4.083468] usbcore: registered new interface driver ums-onetouch
[    4.084061] usbcore: registered new interface driver ums-realtek
[    4.084632] usbcore: registered new interface driver ums-sddr09
[    4.085201] usbcore: registered new interface driver ums-sddr55
[    4.085769] usbcore: registered new interface driver ums-usbat
[    4.086390] usbcore: registered new interface driver usbserial_generic
[    4.086998] usbserial: USB Serial support registered for generic
[    4.089112] mousedev: PS/2 mouse device common for all mice
[    4.093133] rk808 1-0018: chip id: 0x8050
[    4.101483] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    4.102063] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    4.102674] DCDC_REG1: supplied by vcc_sys
[    4.105515] vcc_host_5v: supplied by vcc_sys
[    4.105976] vcc_host1_5v: supplied by vcc_sys
[    4.106466] DCDC_REG2: supplied by vcc_sys
[    4.108350] DCDC_REG3: supplied by vcc_sys
[    4.108980] DCDC_REG4: supplied by vcc_sys
[    4.110534] LDO_REG1: supplied by vcc_io
[    4.114318] LDO_REG2: supplied by vcc_io
[    4.118109] LDO_REG3: supplied by vcc_sys
[    4.126814] device-mapper: uevent: version 1.0.3
[    4.127628] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    4.131391] sdhci: Secure Digital Host Controller Interface driver
[    4.131939] sdhci: Copyright(c) Pierre Ossman
[    4.132663] Synopsys Designware Multimedia Card Interface Driver
[    4.133802] dwmmc_rockchip ff500000.dwmmc: IDMAC supports 32-bit address mode.
[    4.134571] dwmmc_rockchip ff500000.dwmmc: Using internal DMA controller.
[    4.135172] dwmmc_rockchip ff500000.dwmmc: Version ID is 270a
[    4.135718] dwmmc_rockchip ff500000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
[    4.136594] vcc_sd: supplied by vcc_io
[    4.149757] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.161818] dwmmc_rockchip ff520000.dwmmc: IDMAC supports 32-bit address mode.
[    4.162701] dwmmc_rockchip ff520000.dwmmc: Using internal DMA controller.
[    4.163304] dwmmc_rockchip ff520000.dwmmc: Version ID is 270a
[    4.163839] dwmmc_rockchip ff520000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
[    4.165293] mmc_host mmc1: card is non-removable.
[    4.178365] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.192248] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.193371] ledtrig-cpu: registered to indicate activity on CPUs
[    4.194234] hidraw: raw HID events driver (C) Jiri Kosina
[    4.194818] usbcore: registered new interface driver usbhid
[    4.195322] usbhid: USB HID core driver
[    4.197820] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    4.198137] drop_monitor: Initializing network drop monitor service
[    4.198740] mmc0: new high speed SDXC card at address 59b4
[    4.199399] Initializing XFRM netlink socket
[    4.200484] mmcblk0: mmc0:59b4 UD128 119 GiB 
[    4.200667] NET: Registered protocol family 10
[    4.202572]  mmcblk0: p1 p2
[    4.207890] Segment Routing with IPv6
[    4.208275] mip6: Mobile IPv6
[    4.208541] NET: Registered protocol family 17
[    4.209073] Key type dns_resolver registered
[    4.209929] registered taskstats version 1
[    4.210293] Loading compiled-in X.509 certificates
[    4.210786] zswap: loaded using pool lzo/zbud
[    4.211346] Key type big_key registered
[    4.216930] Key type encrypted registered
[    4.221403] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    4.225692] hctosys: unable to open rtc device (rtc0)
[    4.227430] ALSA device list:
[    4.227698]   No soundcards found.
[    4.228176] ttyS2 - failed to request DMA
[    4.233146] Freeing unused kernel memory: 1600K
[    4.250949] random: fast init done
[    4.266203] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    4.294184] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.296364] systemd[1]: Detected architecture arm64.
[    4.296808] systemd[1]: Running in initial RAM disk.
[    4.318125] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[    4.321379] systemd[1]: No hostname configured.
[    4.321792] systemd[1]: Set hostname to <archlinux>.
[    4.322362] random: systemd: uninitialized urandom read (16 bytes read)
[    4.322957] systemd[1]: Initializing machine ID from random generator.
[    4.397771] random: systemd: uninitialized urandom read (16 bytes read)
[    4.398588] systemd[1]: Listening on udev Kernel Socket.
[    4.421494] random: systemd: uninitialized urandom read (16 bytes read)
[    4.422131] systemd[1]: Reached target Slices.
[    4.431310] usb 4-1: new high-speed USB device number 2 using xhci-hcd
[    4.454051] systemd[1]: Reached target Swap.
[    4.481421] systemd[1]: Reached target Timers.
[    4.601288] usb 3-1: new low-speed USB device number 2 using ohci-platform
[    4.624813] usb 4-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.23
[    4.625532] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.626156] usb 4-1: Product: 4-Port USB 2.0 Hub
[    4.626561] usb 4-1: Manufacturer: Generic
[    4.680578] hub 4-1:1.0: USB hub found
[    4.682005] hub 4-1:1.0: 4 ports detected
[    4.841882] usb 5-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    4.885916] usb 5-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.23
[    4.886638] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.887262] usb 5-1: Product: 4-Port USB 3.0 Hub
[    4.887668] usb 5-1: Manufacturer: Generic
[    4.899379] usb 3-1: New USB device found, idVendor=051d, idProduct=0002, bcdDevice= 1.06
[    4.900102] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.900733] usb 3-1: Product: Back-UPS ES 550G FW:904.W1 .D USB FW:W1 
[    4.901335] usb 3-1: Manufacturer: APC
[    4.901668] usb 3-1: SerialNumber: 4B1544P16283  
[    4.923350] hub 5-1:1.0: USB hub found
[    4.924906] hub 5-1:1.0: 4 ports detected
[    5.042281] hid-generic 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550G FW:904.W1 .D USB FW:W1 ] on usb-ff5d0000.usb-1/input0
[    5.061340] usb 4-1.4: new high-speed USB device number 3 using xhci-hcd
[    5.205495] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.23
[    5.206238] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.206878] usb 4-1.4: Product: 4-Port USB 2.0 Hub
[    5.207299] usb 4-1.4: Manufacturer: Generic
[    5.256701] hub 4-1.4:1.0: USB hub found
[    5.258218] hub 4-1.4:1.0: 4 ports detected
[    5.319928] usb 5-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    5.342584] usb 5-1.1: New USB device found, idVendor=1058, idProduct=25ee, bcdDevice=40.04
[    5.343328] usb 5-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    5.343972] usb 5-1.1: Product: My Book 25EE
[    5.344351] usb 5-1.1: Manufacturer: Western Digital
[    5.344789] usb 5-1.1: SerialNumber: 574343374B3141595A4C3059
[    5.356935] usb-storage 5-1.1:1.0: USB Mass Storage device detected
[    5.358382] scsi host0: usb-storage 5-1.1:1.0
[    5.391405] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    5.391993] usb 5-1-port2: cannot reset (err = -71)
[    5.392470] usb 5-1-port2: cannot reset (err = -71)
[    5.392946] usb 5-1-port2: cannot reset (err = -71)
[    5.393417] usb 5-1-port2: cannot reset (err = -71)
[    5.393847] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[    5.394491] usb 5-1-port2: cannot disable (err = -71)
[    5.395251] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    5.395860] usb 5-1-port2: cannot reset (err = -71)
[    5.396399] usb 5-1-port2: cannot reset (err = -71)
[    5.396960] usb 5-1-port2: cannot reset (err = -71)
[    5.397488] usb 5-1-port2: cannot reset (err = -71)
[    5.398018] usb 5-1-port2: cannot reset (err = -71)
[    5.398455] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[    5.399699] usb 5-1-port2: cannot disable (err = -71)
[    5.400260] usb 5-1-port2: attempt power cycle
[    5.421002] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    5.421039] rk_gmac-dwmac ff540000.ethernet: PTP uses main clock
[    5.422491] rk_gmac-dwmac ff540000.ethernet: clock input or output? (input).
[    5.423127] rk_gmac-dwmac ff540000.ethernet: TX delay(0x24).
[    5.423634] rk_gmac-dwmac ff540000.ethernet: RX delay(0x18).
[    5.424140] rk_gmac-dwmac ff540000.ethernet: integrated PHY? (no).
[    5.426468] rk_gmac-dwmac ff540000.ethernet: clock input from PHY
[    5.432091] rk_gmac-dwmac ff540000.ethernet: init for RGMII
[    5.432822] rk_gmac-dwmac ff540000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    5.433462] rk_gmac-dwmac ff540000.ethernet:     DWMAC1000
[    5.433926] rk_gmac-dwmac ff540000.ethernet: DMA HW capability register supported
[    5.434582] rk_gmac-dwmac ff540000.ethernet: RX Checksum Offload Engine supported
[    5.435238] rk_gmac-dwmac ff540000.ethernet: COE Type 2
[    5.435697] rk_gmac-dwmac ff540000.ethernet: Wake-Up On Lan supported
[    5.436297] rk_gmac-dwmac ff540000.ethernet: Normal descriptors
[    5.436820] rk_gmac-dwmac ff540000.ethernet: Ring mode enabled
[    5.437334] rk_gmac-dwmac ff540000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    5.467578] libphy: stmmac: probed
[    5.467905] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    5.468740] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL)
[    5.524249] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    5.531422] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
[    5.532106] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[    5.533165] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.731551] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    5.732115] usb 5-1-port2: cannot reset (err = -71)
[    5.732587] usb 5-1-port2: cannot reset (err = -71)
[    5.733050] usb 5-1-port2: cannot reset (err = -71)
[    5.733532] usb 5-1-port2: cannot reset (err = -71)
[    5.733989] usb 5-1-port2: cannot reset (err = -71)
[    5.734417] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[    5.735242] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    5.735818] usb 5-1-port2: cannot reset (err = -71)
[    5.736284] usb 5-1-port2: cannot reset (err = -71)
[    5.736810] usb 5-1-port2: cannot reset (err = -71)
[    5.737290] usb 5-1-port2: cannot reset (err = -71)
[    5.737804] usb 5-1-port2: cannot reset (err = -71)
[    5.738236] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[    5.738875] usb 5-1-port2: unable to enumerate USB device
[    5.739425] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    5.739983] usb 5-1.1: USB disconnect, device number 3
[    6.040380] usb 5-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    6.421327] usb 5-1.1: new SuperSpeed Gen 1 USB device number 8 using xhci-hcd
[    6.452200] usb 5-1.1: New USB device found, idVendor=1058, idProduct=25ee, bcdDevice=40.04
[    6.452936] usb 5-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    6.453575] usb 5-1.1: Product: My Book 25EE
[    6.453951] usb 5-1.1: Manufacturer: Western Digital
[    6.454386] usb 5-1.1: SerialNumber: 574343374B3141595A4C3059
[    6.455681] usb-storage 5-1.1:1.0: USB Mass Storage device detected
[    6.456470] scsi host0: usb-storage 5-1.1:1.0
[    6.551338] usb 5-1.2: new SuperSpeed Gen 1 USB device number 9 using xhci-hcd
[    6.552839] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.553612] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.582239] usb 5-1.2: New USB device found, idVendor=0480, idProduct=0110, bcdDevice= 1.00
[    6.582976] usb 5-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    6.583615] usb 5-1.2: Product: External USB 3.0
[    6.584020] usb 5-1.2: Manufacturer: TOSHIBA
[    6.584396] usb 5-1.2: SerialNumber: DK3P712205BB
[    6.586326] usb-storage 5-1.2:1.0: USB Mass Storage device detected
[    6.587145] scsi host1: usb-storage 5-1.2:1.0
[    6.703161] usb 5-1.4: Device not responding to setup address.
[    6.921318] usb 5-1.4: Device not responding to setup address.
[    7.141287] usb 5-1.4: device not accepting address 10, error -71
[    7.141885] usb 5-1-port4: cannot disable (err = -71)
[    7.142482] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    7.143028] usb 5-1-port4: cannot reset (err = -71)
[    7.143480] usb 5-1-port4: cannot reset (err = -71)
[    7.143932] usb 5-1-port4: cannot reset (err = -71)
[    7.144398] usb 5-1-port4: cannot reset (err = -71)
[    7.144850] usb 5-1-port4: cannot reset (err = -71)
[    7.145276] usb 5-1-port4: Cannot enable. Maybe the USB cable is bad?
[    7.145864] usb 5-1-port4: cannot disable (err = -71)
[    7.146318] usb 5-1-port4: attempt power cycle
[    7.481417] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    7.481970] usb 5-1-port4: cannot reset (err = -71)
[    7.482423] usb 5-1-port4: cannot reset (err = -71)
[    7.482874] usb 5-1-port4: cannot reset (err = -71)
[    7.483326] usb 5-1-port4: cannot reset (err = -71)
[    7.483777] usb 5-1-port4: cannot reset (err = -71)
[    7.484204] usb 5-1-port4: Cannot enable. Maybe the USB cable is bad?
[    7.484792] usb 5-1-port4: cannot disable (err = -71)
[    7.485358] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[    7.485902] usb 5-1-port4: cannot reset (err = -71)
[    7.486353] usb 5-1-port4: cannot reset (err = -71)
[    7.486804] usb 5-1-port4: cannot reset (err = -71)
[    7.487256] usb 5-1-port4: cannot reset (err = -71)
[    7.487707] usb 5-1-port4: cannot reset (err = -71)
[    7.488133] usb 5-1-port4: Cannot enable. Maybe the USB cable is bad?
[    7.488720] usb 5-1-port4: cannot disable (err = -71)
[    7.489173] usb 5-1-port4: unable to enumerate USB device
[    7.489671] usb 5-1-port4: cannot disable (err = -71)
[    7.490156] usb 5-1.1: USB disconnect, device number 8
[    7.521974] usb 5-1.2: USB disconnect, device number 9
[    7.799879] usb 5-1: Device not responding to setup address.
[    8.011339] usb 5-1: Device not responding to setup address.
[    8.231292] usb 5-1: device not accepting address 2, error -71
[    8.461825] usb 5-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    8.861380] usb 5-1.1: new SuperSpeed Gen 1 USB device number 14 using xhci-hcd
[    8.892200] usb 5-1.1: New USB device found, idVendor=1058, idProduct=25ee, bcdDevice=40.04
[    8.892936] usb 5-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    8.893575] usb 5-1.1: Product: My Book 25EE
[    8.893951] usb 5-1.1: Manufacturer: Western Digital
[    8.894386] usb 5-1.1: SerialNumber: 574343374B3141595A4C3059
[    8.895695] usb-storage 5-1.1:1.0: USB Mass Storage device detected
[    8.896514] scsi host0: usb-storage 5-1.1:1.0
[    8.991337] usb 5-1.2: new SuperSpeed Gen 1 USB device number 15 using xhci-hcd
[    9.022136] usb 5-1.2: New USB device found, idVendor=0480, idProduct=0110, bcdDevice= 1.00
[    9.022872] usb 5-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    9.023511] usb 5-1.2: Product: External USB 3.0
[    9.023918] usb 5-1.2: Manufacturer: TOSHIBA
[    9.024293] usb 5-1.2: SerialNumber: DK3P712205BB
[    9.025528] usb-storage 5-1.2:1.0: USB Mass Storage device detected
[    9.026315] scsi host1: usb-storage 5-1.2:1.0
[    9.121867] usb 5-1.4: new SuperSpeed Gen 1 USB device number 16 using xhci-hcd
[    9.165188] usb 5-1.4: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.23
[    9.165924] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.166563] usb 5-1.4: Product: 4-Port USB 3.0 Hub
[    9.166984] usb 5-1.4: Manufacturer: Generic
[    9.196054] hub 5-1.4:1.0: USB hub found
[    9.197772] hub 5-1.4:1.0: 4 ports detected
[    9.521337] usb 5-1.4.3: new SuperSpeed Gen 1 USB device number 17 using xhci-hcd
[    9.552258] usb 5-1.4.3: New USB device found, idVendor=1058, idProduct=25e2, bcdDevice=40.05
[    9.553011] usb 5-1.4.3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    9.553665] usb 5-1.4.3: Product: My Passport 25E2
[    9.554087] usb 5-1.4.3: Manufacturer: Western Digital
[    9.554536] usb 5-1.4.3: SerialNumber: 5758353144393748364E434B
[    9.556175] usb-storage 5-1.4.3:1.0: USB Mass Storage device detected
[    9.557450] scsi host2: usb-storage 5-1.4.3:1.0
[    9.651339] usb 5-1.4.4: new SuperSpeed Gen 1 USB device number 18 using xhci-hcd
[    9.682200] usb 5-1.4.4: New USB device found, idVendor=0bc2, idProduct=2322, bcdDevice= 0.00
[    9.682952] usb 5-1.4.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    9.683607] usb 5-1.4.4: Product: Expansion
[    9.683974] usb 5-1.4.4: Manufacturer: Seagate
[    9.684365] usb 5-1.4.4: SerialNumber: NA823B8K
[    9.695392] scsi host3: uas
[    9.696711] scsi 3:0:0:0: Direct-Access     Seagate  Expansion        9300 PQ: 0 ANSI: 6
[    9.698705] sd 3:0:0:0: Attached scsi generic sg0 type 0
[    9.699211] sd 3:0:0:0: [sda] 1465149167 512-byte logical blocks: (750 GB/699 GiB)
[    9.699887] sd 3:0:0:0: [sda] 4096-byte physical blocks
[    9.911852] scsi 0:0:0:0: Direct-Access     WD       My Book 25EE     4004 PQ: 0 ANSI: 6
[    9.912926] scsi 0:0:0:1: Enclosure         WD       SES Device       4004 PQ: 0 ANSI: 6
[    9.915276] sd 0:0:0:0: Attached scsi generic sg1 type 0
[    9.915446] sd 0:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[    9.916403] scsi 0:0:0:1: Attached scsi generic sg2 type 13
[    9.916637] sd 0:0:0:0: [sdb] 7814035456 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    9.917581] sd 0:0:0:0: [sdb] 4096-byte physical blocks
[    9.918378] sd 0:0:0:0: [sdb] Write Protect is off
[    9.918812] sd 0:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    9.919137] sd 0:0:0:0: [sdb] No Caching mode page found
[    9.919619] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    9.938204] usb 5-1.1: USB disconnect, device number 14
[    9.971317] sd 0:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[    9.972090] sd 0:0:0:0: [sdb] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[    9.972866] print_req_error: I/O error, dev sdb, sector 0
[    9.973340] Buffer I/O error on dev sdb, logical block 0, async page read
[    9.974019] ldm_validate_partition_table(): Disk read failed.
[    9.974582] Dev sdb: unable to read RDB block 0
[    9.975009]  sdb: unable to read partition table
[    9.975898] sd 0:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[    9.976770] sd 0:0:0:0: [sdb] Sense not available.
[    9.977349] sd 0:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[    9.978217] sd 0:0:0:0: [sdb] Sense not available.
[    9.978645] sd 0:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[    9.979187] sd 0:0:0:0: [sdb] 4096-byte physical blocks
[    9.979776] sd 0:0:0:0: [sdb] Attached SCSI disk
[   10.071670] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[   10.072224] usb 5-1-port2: cannot reset (err = -71)
[   10.072677] usb 5-1-port2: cannot reset (err = -71)
[   10.073129] usb 5-1-port2: cannot reset (err = -71)
[   10.073580] usb 5-1-port2: cannot reset (err = -71)
[   10.074031] usb 5-1-port2: cannot reset (err = -71)
[   10.074458] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[   10.075048] usb 5-1-port2: cannot disable (err = -71)
[   10.075524] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[   10.076067] usb 5-1-port2: cannot reset (err = -71)
[   10.076523] usb 5-1-port2: cannot reset (err = -71)
[   10.076974] usb 5-1-port2: cannot reset (err = -71)
[   10.077426] usb 5-1-port2: cannot reset (err = -71)
[   10.077877] usb 5-1-port2: cannot reset (err = -71)
[   10.078303] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[   10.078898] usb 5-1-port2: cannot disable (err = -71)
[   10.079367] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[   10.079909] usb 5-1-port2: cannot reset (err = -71)
[   10.080360] usb 5-1-port2: cannot reset (err = -71)
[   10.080811] usb 5-1-port2: cannot reset (err = -71)
[   10.082704] usb 5-1-port2: cannot reset (err = -71)
[   10.083203] usb 5-1-port2: cannot reset (err = -71)
[   10.083634] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[   10.084249] usb 5-1-port2: cannot disable (err = -71)
[   10.084750] hub 5-1:1.0: hub_ext_port_status failed (err = -71)
[   10.085310] usb 5-1-port2: cannot reset (err = -71)
[   10.085788] usb 5-1-port2: cannot reset (err = -71)
[   10.086249] usb 5-1-port2: cannot reset (err = -71)
[   10.086702] usb 5-1-port2: cannot reset (err = -71)
[   10.087155] usb 5-1-port2: cannot reset (err = -71)
[   10.087583] usb 5-1-port2: Cannot enable. Maybe the USB cable is bad?
[   10.088172] usb 5-1-port2: cannot disable (err = -71)
[   10.088648] usb 5-1-port2: cannot disable (err = -71)
[   10.631660] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   10.632228] usb 5-1.4-port3: cannot reset (err = -71)
[   10.632696] usb 5-1.4-port3: cannot reset (err = -71)
[   10.633164] usb 5-1.4-port3: cannot reset (err = -71)
[   10.633630] usb 5-1.4-port3: cannot reset (err = -71)
[   10.634098] usb 5-1.4-port3: cannot reset (err = -71)
[   10.634539] usb 5-1.4-port3: Cannot enable. Maybe the USB cable is bad?
[   10.635148] usb 5-1.4-port3: cannot disable (err = -71)
[   10.635650] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   10.636207] usb 5-1.4-port3: cannot reset (err = -71)
[   10.636674] usb 5-1.4-port3: cannot reset (err = -71)
[   10.637148] usb 5-1.4-port3: cannot reset (err = -71)
[   10.637616] usb 5-1.4-port3: cannot reset (err = -71)
[   10.638083] usb 5-1.4-port3: cannot reset (err = -71)
[   10.638525] usb 5-1.4-port3: Cannot enable. Maybe the USB cable is bad?
[   10.639126] usb 5-1.4-port3: cannot disable (err = -71)
[   10.639611] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   10.640167] usb 5-1.4-port3: cannot reset (err = -71)
[   10.640648] usb 5-1.4-port3: cannot reset (err = -71)
[   10.641115] usb 5-1.4-port3: cannot reset (err = -71)
[   10.641614] usb 5-1.4-port3: cannot reset (err = -71)
[   10.642084] usb 5-1.4-port3: cannot reset (err = -71)
[   10.642528] usb 5-1.4-port3: Cannot enable. Maybe the USB cable is bad?
[   10.643167] usb 5-1.4-port3: cannot disable (err = -71)
[   10.643683] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   10.644260] usb 5-1.4-port3: cannot reset (err = -71)
[   10.644743] usb 5-1.4-port3: cannot reset (err = -71)
[   10.645224] usb 5-1.4-port3: cannot reset (err = -71)
[   10.645702] usb 5-1.4-port3: cannot reset (err = -71)
[   10.646189] usb 5-1.4-port3: cannot reset (err = -71)
[   10.646634] usb 5-1.4-port3: Cannot enable. Maybe the USB cable is bad?
[   10.647244] usb 5-1.4-port3: cannot disable (err = -71)
[   10.647730] usb 5-1.4-port3: cannot disable (err = -71)
[   10.648266] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   40.171293] sd 3:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[   40.171954] sd 3:0:0:0: tag#0 CDB: Mode Sense(6) 1a 00 3f 00 04 00
[   40.172527] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 8 ep 2
[   40.173281] xhci-hcd xhci-hcd.0.auto: @00000000f7c4a3d0 00000000 00000000 1b000000 08038001
[   40.211297] scsi host3: uas_eh_device_reset_handler start
[   40.211806] xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 8 ep 6
[   40.212560] xhci-hcd xhci-hcd.0.auto: @00000000f7c4a400 00000000 00000000 1b000000 08078001
[   40.213810] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   40.214373] usb 5-1.4-port4: cannot reset (err = -71)
[   40.214840] usb 5-1.4-port4: cannot reset (err = -71)
[   40.215308] usb 5-1.4-port4: cannot reset (err = -71)
[   40.215775] usb 5-1.4-port4: cannot reset (err = -71)
[   40.216241] usb 5-1.4-port4: cannot reset (err = -71)
[   40.216683] usb 5-1.4-port4: Cannot enable. Maybe the USB cable is bad?
[   40.217288] usb 5-1.4-port4: cannot disable (err = -71)
[   40.217774] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   40.218331] usb 5-1.4-port4: cannot reset (err = -71)
[   40.218798] usb 5-1.4-port4: cannot reset (err = -71)
[   40.219273] usb 5-1.4-port4: cannot reset (err = -71)
[   40.219739] usb 5-1.4-port4: cannot reset (err = -71)
[   40.220205] usb 5-1.4-port4: cannot reset (err = -71)
[   40.220646] usb 5-1.4-port4: Cannot enable. Maybe the USB cable is bad?
[   40.221248] usb 5-1.4-port4: cannot disable (err = -71)
[   40.221791] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   40.222376] usb 5-1.4-port4: cannot reset (err = -71)
[   40.222866] usb 5-1.4-port4: cannot reset (err = -71)
[   40.223355] usb 5-1.4-port4: cannot reset (err = -71)
[   40.223837] usb 5-1.4-port4: cannot reset (err = -71)
[   40.224325] usb 5-1.4-port4: cannot reset (err = -71)
[   40.224770] usb 5-1.4-port4: Cannot enable. Maybe the USB cable is bad?
[   40.225398] usb 5-1.4-port4: cannot disable (err = -71)
[   40.225914] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   40.226497] usb 5-1.4-port4: cannot reset (err = -71)
[   40.226977] usb 5-1.4-port4: cannot reset (err = -71)
[   40.227458] usb 5-1.4-port4: cannot reset (err = -71)
[   40.227943] usb 5-1.4-port4: cannot reset (err = -71)
[   40.228417] usb 5-1.4-port4: cannot reset (err = -71)
[   40.228859] usb 5-1.4-port4: Cannot enable. Maybe the USB cable is bad?
[   40.229465] usb 5-1.4-port4: cannot disable (err = -71)
[   40.229948] usb 5-1.4-port4: cannot disable (err = -71)
[   40.230473] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[   40.231038] hub 5-1.4:1.0: hub_ext_port_status failed (err = -71)
[  243.671298] INFO: task kworker/1:0:19 blocked for more than 120 seconds.
[  243.671892]       Not tainted 4.18.0-rc7-2-ARCH #1
[  243.672311] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  243.672993] kworker/1:0     D    0    19      2 0x00000028
[  243.673487] Workqueue: usb_hub_wq hub_event
[  243.673857] Call trace:
[  243.674079]  __switch_to+0x74/0x98
[  243.674381]  __schedule+0x234/0x838
[  243.674689]  schedule+0x30/0x88
[  243.674967]  schedule_preempt_disabled+0x14/0x20
[  243.675373]  __mutex_lock.isra.0+0x260/0x4e8
[  243.675749]  __mutex_lock_slowpath+0x24/0x30
[  243.676126]  mutex_lock+0x54/0x58
[  243.676419]  hub_event+0x54/0x3d0
[  243.676714]  process_one_work+0x1b0/0x3d0
[  243.677067]  worker_thread+0x48/0x418
[  243.677391]  kthread+0x130/0x138
[  243.677677]  ret_from_fork+0x10/0x1c
[  243.677999] INFO: task kworker/0:1:36 blocked for more than 120 seconds.
[  243.678584]       Not tainted 4.18.0-rc7-2-ARCH #1
[  243.679003] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  243.679684] kworker/0:1     D    0    36      2 0x00000028
[  243.680170] Workqueue: usb_hub_wq hub_event
[  243.680538] Call trace:
[  243.680756]  __switch_to+0x74/0x98
[  243.681056]  __schedule+0x234/0x838
[  243.681395]  schedule+0x30/0x88
[  243.681678]  async_synchronize_cookie_domain+0xf0/0x180
[  243.682137]  async_synchronize_full_domain+0x24/0x30
[  243.682574]  sd_remove+0x50/0xd8
[  243.682862]  device_release_driver_internal+0x1b0/0x248
[  243.683320]  device_release_driver+0x28/0x38
[  243.683696]  bus_remove_device+0xd4/0x148
[  243.684050]  device_del+0x130/0x338
[  243.684359]  __scsi_remove_device+0x108/0x138
[  243.684744]  scsi_forget_host+0x74/0x78
[  243.685083]  scsi_remove_host+0x78/0x120
[  243.685429]  usb_stor_disconnect+0x5c/0xf8
[  243.685791]  usb_unbind_interface+0x74/0x298
[  243.686169]  device_release_driver_internal+0x1b0/0x248
[  243.686626]  device_release_driver+0x28/0x38
[  243.687002]  bus_remove_device+0xd4/0x148
[  243.687356]  device_del+0x130/0x338
[  243.687663]  usb_disable_device+0xb0/0x2a0
[  243.688026]  usb_disconnect+0xc0/0x268
[  243.688356]  hub_quiesce+0x64/0xb0
[  243.688657]  hub_pre_reset+0x28/0x80
[  243.688972]  usb_reset_device+0xc4/0x250
[  243.689318]  port_event+0x5e4/0x6e8
[  243.689626]  hub_event+0x144/0x3d0
[  243.689928]  process_one_work+0x1b0/0x3d0
[  243.690282]  worker_thread+0x48/0x418
[  243.690605]  kthread+0x130/0x138
[  243.690891]  ret_from_fork+0x10/0x1c
[  243.691241] INFO: task scsi_eh_3:342 blocked for more than 120 seconds.
[  243.691843]       Not tainted 4.18.0-rc7-2-ARCH #1
[  243.692264] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  243.692946] scsi_eh_3       D    0   342      2 0x00000028
[  243.693430] Call trace:
[  243.693652]  __switch_to+0x74/0x98
[  243.693955]  __schedule+0x234/0x838
[  243.694262]  schedule+0x30/0x88
[  243.694543]  async_synchronize_cookie_domain+0xf0/0x180
[  243.695001]  async_synchronize_full_domain+0x24/0x30
[  243.695438]  sd_remove+0x50/0xd8
[  243.695725]  device_release_driver_internal+0x1b0/0x248
[  243.696183]  device_release_driver+0x28/0x38
[  243.696561]  bus_remove_device+0xd4/0x148
[  243.696914]  device_del+0x130/0x338
[  243.697222]  __scsi_remove_device+0x108/0x138
[  243.697608]  scsi_forget_host+0x74/0x78
[  243.697946]  scsi_remove_host+0x78/0x120
[  243.698294]  uas_disconnect+0x7c/0xa0
[  243.698618]  usb_unbind_interface+0x74/0x298
[  243.698995]  device_release_driver_internal+0x1b0/0x248
[  243.699453]  device_release_driver+0x28/0x38
[  243.699828]  usb_driver_release_interface+0x6c/0x98
[  243.700256]  usb_forced_unbind_intf+0x30/0x68
[  243.700640]  unbind_marked_interfaces.isra.8+0x58/0x78
[  243.701091]  usb_unbind_and_rebind_marked_interfaces+0x20/0x38
[  243.701631]  usb_reset_device+0x154/0x250
[  243.701989]  uas_eh_device_reset_handler+0xb8/0x190
[  243.702417]  scsi_eh_ready_devs+0x318/0xb68
[  243.702784]  scsi_error_handler+0x448/0x588
[  243.703151]  kthread+0x130/0x138
[  243.703438]  ret_from_fork+0x10/0x1c
[  366.551290] INFO: task kworker/1:0:19 blocked for more than 120 seconds.
[  366.551884]       Not tainted 4.18.0-rc7-2-ARCH #1
[  366.552303] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  366.552985] kworker/1:0     D    0    19      2 0x00000028
[  366.553479] Workqueue: usb_hub_wq hub_event
[  366.553849] Call trace:
[  366.554070]  __switch_to+0x74/0x98
[  366.554372]  __schedule+0x234/0x838
[  366.554679]  schedule+0x30/0x88
[  366.554959]  schedule_preempt_disabled+0x14/0x20
[  366.555366]  __mutex_lock.isra.0+0x260/0x4e8
[  366.555741]  __mutex_lock_slowpath+0x24/0x30
[  366.556118]  mutex_lock+0x54/0x58
[  366.556412]  hub_event+0x54/0x3d0
[  366.556706]  process_one_work+0x1b0/0x3d0
[  366.557060]  worker_thread+0x48/0x418
[  366.557383]  kthread+0x130/0x138
[  366.557669]  ret_from_fork+0x10/0x1c
[  366.557991] INFO: task kworker/0:1:36 blocked for more than 120 seconds.
[  366.558576]       Not tainted 4.18.0-rc7-2-ARCH #1
[  366.558994] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  366.559676] kworker/0:1     D    0    36      2 0x00000028
[  366.560161] Workqueue: usb_hub_wq hub_event
[  366.560529] Call trace:
[  366.560746]  __switch_to+0x74/0x98
[  366.561046]  __schedule+0x234/0x838
[  366.561382]  schedule+0x30/0x88
[  366.561666]  async_synchronize_cookie_domain+0xf0/0x180
[  366.562126]  async_synchronize_full_domain+0x24/0x30
[  366.562562]  sd_remove+0x50/0xd8
[  366.562850]  device_release_driver_internal+0x1b0/0x248
[  366.563308]  device_release_driver+0x28/0x38
[  366.563685]  bus_remove_device+0xd4/0x148
[  366.564039]  device_del+0x130/0x338
[  366.564350]  __scsi_remove_device+0x108/0x138
[  366.564735]  scsi_forget_host+0x74/0x78
[  366.565073]  scsi_remove_host+0x78/0x120
[  366.565420]  usb_stor_disconnect+0x5c/0xf8
[  366.565782]  usb_unbind_interface+0x74/0x298
[  366.566159]  device_release_driver_internal+0x1b0/0x248
[  366.566617]  device_release_driver+0x28/0x38
[  366.566994]  bus_remove_device+0xd4/0x148
[  366.567348]  device_del+0x130/0x338
[  366.567656]  usb_disable_device+0xb0/0x2a0
[  366.568018]  usb_disconnect+0xc0/0x268
[  366.568349]  hub_quiesce+0x64/0xb0
[  366.568649]  hub_pre_reset+0x28/0x80
[  366.568965]  usb_reset_device+0xc4/0x250
[  366.569311]  port_event+0x5e4/0x6e8
[  366.569619]  hub_event+0x144/0x3d0
[  366.569920]  process_one_work+0x1b0/0x3d0
[  366.570274]  worker_thread+0x48/0x418
[  366.570598]  kthread+0x130/0x138
[  366.570884]  ret_from_fork+0x10/0x1c
[  366.571230] INFO: task scsi_eh_3:342 blocked for more than 120 seconds.
[  366.571831]       Not tainted 4.18.0-rc7-2-ARCH #1
[  366.572255] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  366.572936] scsi_eh_3       D    0   342      2 0x00000028
[  366.573420] Call trace:
[  366.573643]  __switch_to+0x74/0x98
[  366.573946]  __schedule+0x234/0x838
[  366.574253]  schedule+0x30/0x88
[  366.574535]  async_synchronize_cookie_domain+0xf0/0x180
[  366.574994]  async_synchronize_full_domain+0x24/0x30
[  366.575431]  sd_remove+0x50/0xd8
[  366.575719]  device_release_driver_internal+0x1b0/0x248
[  366.576176]  device_release_driver+0x28/0x38
[  366.576554]  bus_remove_device+0xd4/0x148
[  366.576908]  device_del+0x130/0x338
[  366.577217]  __scsi_remove_device+0x108/0x138
[  366.577602]  scsi_forget_host+0x74/0x78
[  366.577940]  scsi_remove_host+0x78/0x120
[  366.578288]  uas_disconnect+0x7c/0xa0
[  366.578611]  usb_unbind_interface+0x74/0x298
[  366.578989]  device_release_driver_internal+0x1b0/0x248
[  366.579446]  device_release_driver+0x28/0x38
[  366.579822]  usb_driver_release_interface+0x6c/0x98
[  366.580250]  usb_forced_unbind_intf+0x30/0x68
[  366.580634]  unbind_marked_interfaces.isra.8+0x58/0x78
[  366.581084]  usb_unbind_and_rebind_marked_interfaces+0x20/0x38
[  366.581621]  usb_reset_device+0x154/0x250
[  366.581979]  uas_eh_device_reset_handler+0xb8/0x190
[  366.582410]  scsi_eh_ready_devs+0x318/0xb68
[  366.582781]  scsi_error_handler+0x448/0x588
[  366.583150]  kthread+0x130/0x138
[  366.583435]  ret_from_fork+0x10/0x1c
[  432.312790] random: crng init done
[  432.313103] random: 7 urandom warning(s) missed due to ratelimiting
[  489.431312] INFO: task kworker/1:0:19 blocked for more than 120 seconds.
[  489.431906]       Not tainted 4.18.0-rc7-2-ARCH #1
[  489.432325] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  489.433009] kworker/1:0     D    0    19      2 0x00000028
[  489.433501] Workqueue: usb_hub_wq hub_event
[  489.433870] Call trace:
[  489.434093]  __switch_to+0x74/0x98
[  489.434396]  __schedule+0x234/0x838
[  489.434704]  schedule+0x30/0x88
[  489.434981]  schedule_preempt_disabled+0x14/0x20
[  489.435386]  __mutex_lock.isra.0+0x260/0x4e8
[  489.435762]  __mutex_lock_slowpath+0x24/0x30
[  489.436139]  mutex_lock+0x54/0x58
[  489.436433]  hub_event+0x54/0x3d0
[  489.436728]  process_one_work+0x1b0/0x3d0
[  489.437082]  worker_thread+0x48/0x418
[  489.437405]  kthread+0x130/0x138
[  489.437691]  ret_from_fork+0x10/0x1c
[  489.438014] INFO: task kworker/0:1:36 blocked for more than 120 seconds.
[  489.438599]       Not tainted 4.18.0-rc7-2-ARCH #1
[  489.439017] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  489.439699] kworker/0:1     D    0    36      2 0x00000028
[  489.440187] Workqueue: usb_hub_wq hub_event
[  489.440554] Call trace:
[  489.440773]  __switch_to+0x74/0x98
[  489.441075]  __schedule+0x234/0x838
[  489.441433]  schedule+0x30/0x88
[  489.441721]  async_synchronize_cookie_domain+0xf0/0x180
[  489.442181]  async_synchronize_full_domain+0x24/0x30
[  489.442618]  sd_remove+0x50/0xd8
[  489.442906]  device_release_driver_internal+0x1b0/0x248
[  489.443363]  device_release_driver+0x28/0x38
[  489.443740]  bus_remove_device+0xd4/0x148
[  489.444092]  device_del+0x130/0x338
[  489.444400]  __scsi_remove_device+0x108/0x138
[  489.444784]  scsi_forget_host+0x74/0x78
[  489.445122]  scsi_remove_host+0x78/0x120
[  489.445469]  usb_stor_disconnect+0x5c/0xf8
[  489.445830]  usb_unbind_interface+0x74/0x298
[  489.446207]  device_release_driver_internal+0x1b0/0x248
[  489.446665]  device_release_driver+0x28/0x38
[  489.447043]  bus_remove_device+0xd4/0x148
[  489.447396]  device_del+0x130/0x338
[  489.447705]  usb_disable_device+0xb0/0x2a0
[  489.448067]  usb_disconnect+0xc0/0x268
[  489.448398]  hub_quiesce+0x64/0xb0
[  489.448698]  hub_pre_reset+0x28/0x80
[  489.449015]  usb_reset_device+0xc4/0x250
[  489.449360]  port_event+0x5e4/0x6e8
[  489.449668]  hub_event+0x144/0x3d0
[  489.449970]  process_one_work+0x1b0/0x3d0
[  489.450324]  worker_thread+0x48/0x418
[  489.450646]  kthread+0x130/0x138
[  489.450933]  ret_from_fork+0x10/0x1c
[  489.451320] INFO: task scsi_eh_3:342 blocked for more than 120 seconds.
[  489.451905]       Not tainted 4.18.0-rc7-2-ARCH #1
[  489.452325] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  489.453007] scsi_eh_3       D    0   342      2 0x00000028
[  489.453490] Call trace:
[  489.453716]  __switch_to+0x74/0x98
[  489.454019]  __schedule+0x234/0x838
[  489.454326]  schedule+0x30/0x88
[  489.454607]  async_synchronize_cookie_domain+0xf0/0x180
[  489.455067]  async_synchronize_full_domain+0x24/0x30
[  489.455504]  sd_remove+0x50/0xd8
[  489.455791]  device_release_driver_internal+0x1b0/0x248
[  489.456250]  device_release_driver+0x28/0x38
[  489.456627]  bus_remove_device+0xd4/0x148
[  489.456981]  device_del+0x130/0x338
[  489.457290]  __scsi_remove_device+0x108/0x138
[  489.457675]  scsi_forget_host+0x74/0x78
[  489.458013]  scsi_remove_host+0x78/0x120
[  489.458361]  uas_disconnect+0x7c/0xa0
[  489.458684]  usb_unbind_interface+0x74/0x298
[  489.459062]  device_release_driver_internal+0x1b0/0x248
[  489.459521]  device_release_driver+0x28/0x38
[  489.459896]  usb_driver_release_interface+0x6c/0x98
[  489.460324]  usb_forced_unbind_intf+0x30/0x68
[  489.460707]  unbind_marked_interfaces.isra.8+0x58/0x78
[  489.461158]  usb_unbind_and_rebind_marked_interfaces+0x20/0x38
[  489.461709]  usb_reset_device+0x154/0x250
[  489.462071]  uas_eh_device_reset_handler+0xb8/0x190
[  489.462500]  scsi_eh_ready_devs+0x318/0xb68
[  489.462868]  scsi_error_handler+0x448/0x588
[  489.463238]  kthread+0x130/0x138
[  489.463525]  ret_from_fork+0x10/0x1c
[  552.635505] F2FS-fs (dm-0): Found nat_bits in checkpoint
[  553.361395] F2FS-fs (dm-0): Mounted with checkpoint version = 4de0e18d
[  554.200676] systemd-journald[249]: Received SIGTERM from PID 1 (systemd).
[  554.290798] systemd: 23 output lines suppressed due to ratelimiting
[  555.265168] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[  555.267311] systemd[1]: Detected architecture arm64.
[  555.280871] systemd[1]: Set hostname to <kumo>.
[  556.443773] systemd[1]: Stopped Switch Root.
[  556.471799] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[  556.472963] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[  556.473786] systemd[1]: Stopped Journal Service.
[  556.501631] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  556.542313] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[  556.581445] systemd[1]: Stopped target Switch Root.
[  558.156297] systemd-journald[571]: Received request to flush runtime journal from PID 1
[  558.794555] systemd-journald[571]: File /var/log/journal/4162d318469b4a059d26986104a86b35/system.journal corrupted or uncleanly shut down, renaming and replacing.
[  560.218518] dw_wdt: probe of ff1a0000.watchdog failed with error -2
[  560.225892] rk808-rtc rk808-rtc: registered as rtc0
[  560.858677] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  612.311289] INFO: task kworker/1:0:19 blocked for more than 120 seconds.
[  612.311881]       Not tainted 4.18.0-rc7-2-ARCH #1
[  612.312300] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  612.312983] kworker/1:0     D    0    19      2 0x00000028
[  612.313477] Workqueue: usb_hub_wq hub_event
[  612.313846] Call trace:
[  612.314068]  __switch_to+0x74/0x98
[  612.314371]  __schedule+0x234/0x838
[  612.314678]  schedule+0x30/0x88
[  612.314956]  schedule_preempt_disabled+0x14/0x20
[  612.315361]  __mutex_lock.isra.0+0x260/0x4e8
[  612.315737]  __mutex_lock_slowpath+0x24/0x30
[  612.316114]  mutex_lock+0x54/0x58
[  612.316407]  hub_event+0x54/0x3d0
[  612.316701]  process_one_work+0x1b0/0x3d0
[  612.317053]  worker_thread+0x48/0x418
[  612.317377]  kthread+0x130/0x138
[  612.317663]  ret_from_fork+0x10/0x1c
[  649.440585] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[  649.461309] rk_gmac-dwmac ff540000.ethernet eth0: No Safety Features support found
[  649.461993] rk_gmac-dwmac ff540000.ethernet eth0: PTP not supported by HW
[  649.462766] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  651.512872] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  651.513656] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1103.280644] scsi 0:0:0:1: Failed to get diagnostic page 0x1
[ 1103.281151] scsi 0:0:0:1: Failed to bind enclosure -19
[ 1103.281673] ses 0:0:0:1: Attached Enclosure device
[root@kumo boot]#

ShapeShifter499 commented 6 years ago

Here is one more snip of dmesg log that might be useful, it dumped a trace

[    5.944846] usb 5-1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    6.253855] ------------[ cut here ]------------
[    6.254273] URB (____ptrval____) submitted while active
[    6.254780] WARNING: CPU: 3 PID: 222 at drivers/usb/core/urb.c:363 usb_submit_urb+0x45c/0x538
[    6.255522] Modules linked in: dwmac_rk stmmac_platform stmmac
[    6.256042] CPU: 3 PID: 222 Comm: kworker/3:3 Not tainted 4.18.0-rc7-2-ARCH #1
[    6.256670] Hardware name: Pine64 Rock64 (DT)
[    6.257057] Workqueue: events_power_efficient hub_init_func2
[    6.257555] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    6.257975] pc : usb_submit_urb+0x45c/0x538
[    6.258343] lr : usb_submit_urb+0x45c/0x538
[    6.258710] sp : ffff00000a07bcc0
[    6.259001] x29: ffff00000a07bcc0 x28: 0000000000000000 
[    6.259467] x27: ffff000009206ed8 x26: ffff8000f11b3000 
[    6.259933] x25: ffff000009729688 x24: 0000000000000001 
[    6.260400] x23: 00000000fffffff0 x22: 0000000000600000 
[    6.260867] x21: 0000000000000000 x20: ffff8000f1cfc000 
[    6.261334] x19: ffff8000f1c50500 x18: 0000000000000010 
[    6.261801] x17: 0000aaaaba854030 x16: ffff0000080eb1b0 
[    6.262268] x15: ffffffffffffffff x14: ffff000009729688 
[    6.262735] x13: ffff000089991447 x12: ffff00000999144f 
[    6.263201] x11: ffff000009751000 x10: ffff00000a07b980 
[    6.263668] x9 : 00000000ffffffd0 x8 : ffff0000087b0808 
[    6.264135] x7 : 772064657474696d x6 : 000000000000016d 
[    6.264602] x5 : 0000000000000001 x4 : 0000000000000001 
[    6.265068] x3 : 0000000000000007 x2 : 0000000000000007 
[    6.265536] x1 : 90cf2eac175d3600 x0 : 0000000000000000 
[    6.266003] Call trace:
[    6.266222]  usb_submit_urb+0x45c/0x538
[    6.266561]  hub_activate+0x35c/0x608
[    6.266883]  hub_init_func2+0x24/0x30
[    6.267209]  process_one_work+0x1b0/0x3d0
[    6.267563]  worker_thread+0x48/0x418
[    6.267886]  kthread+0x130/0x138
[    6.268173]  ret_from_fork+0x10/0x1c
[    6.268487] ---[ end trace c3de9a9ac0647750 ]---

h31 commented 6 years ago

Still happens on 4.4.132-1075-rockchip-ayufan-ga83beded8524. I've posted an issue to the Rockchip's repository.

ShapeShifter499 commented 6 years ago

I no longer have a issue running 4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee After changing my USB 3.0 hub to one with enough power, USB 3.0 appears to work so far.

The mainline kernel build from ayufan still has issues as well as the mainline kernel from Arch Linux ARM. I suspect there is a positive change made by ayufan or the maintainers over at https://github.com/rockchip-linux/kernel to the USB 3.0 drivers. Someone should try to get those changes merged into the mainline kernel source.

Hub used is a "Anker 10 Port 60W Data Hub with 7 USB 3.0 Ports and 3 PowerIQ Charging Ports" which does work fine despite earlier comments here.

ayufan commented 6 years ago

This is great to hear :)

On Fri, 10 Aug 2018 at 18:14, Lance notifications@github.com wrote:

I no longer have a issue running 4.4.138-1094-rockchip-ayufan-gf13a8a9a4eee After changing my USB 3.0 hub to one with enough power, USB 3.0 appears to work so far.

The mainline kernel build from ayufan still has issues as well as the mainline kernel from Arch Linux ARM. I suspect there is a positive change made by ayufan or the maintainers over at https://github.com/rockchip-linux/kernel to the USB 3.0 drivers. Someone should try to get those changes merged into the mainline kernel source.

Hub used is a "Anker 10 Port 60W Data Hub with 7 USB 3.0 Ports and 3 PowerIQ Charging Ports" which does work fine despite earlier comments here.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ayufan-rock64/linux-build/issues/112#issuecomment-412131406, or mute the thread https://github.com/notifications/unsubscribe-auth/ACTpQd7kVx6TkWQIMUuTQcG289RyUbjYks5uPbFXgaJpZM4STaMx .

mikescandy commented 6 years ago

just tried 4.4.138 with usb3, hub anker https://www.anker.com/products/variant/USB-3.0-SuperSpeed-10-Port-Hub-/68ANHUB-B10A and powered external hard drives. no luck, after blacklisting uas and rebooting, I tried to transfer a 40gb file and eventually crashed. transfer speed was above 50MB/s, twice more than 3 times faster than usb2 :( here is the output from dmesg `

[ 135.890718] xhci-hcd xhci-hcd.9.auto: xHCI host not responding to stop endpoint command. [ 135.891613] xhci-hcd xhci-hcd.9.auto: Assuming host is dying, halting host. [ 135.892351] xhci-hcd xhci-hcd.9.auto: xHCI host not responding to stop endpoint command. [ 135.893235] xhci-hcd xhci-hcd.9.auto: Assuming host is dying, halting host. [ 135.915740] xhci-hcd xhci-hcd.9.auto: Host not halted after 16000 microseconds. [ 135.916544] xhci-hcd xhci-hcd.9.auto: Non-responsive xHCI host is not halting. [ 135.917326] xhci-hcd xhci-hcd.9.auto: Completing active URBs anyway. [ 135.917379] xhci-hcd xhci-hcd.9.auto: Host not halted after 16000 microseconds. [ 135.918796] xhci-hcd xhci-hcd.9.auto: Non-responsive xHCI host is not halting. [ 135.919587] xhci-hcd xhci-hcd.9.auto: Completing active URBs anyway. [ 135.920387] xhci-hcd xhci-hcd.9.auto: HC died; cleaning up [ 135.920389] xhci-hcd xhci-hcd.9.auto: HC died; cleaning up [ 135.920397] hub 5-1:1.0: hub_port_status failed (err = -108) [ 135.920407] usb 5-1-port1: cannot reset (err = -108) [ 135.920413] usb 5-1-port1: cannot reset (err = -108) [ 135.920418] usb 5-1-port1: cannot reset (err = -108) [ 135.920423] usb 5-1-port1: cannot reset (err = -108) [ 135.920428] usb 5-1-port1: cannot reset (err = -108) [ 135.920431] usb 5-1-port1: Cannot enable. Maybe the USB cable is bad? [ 135.920548] usb 5-1.1: USB disconnect, device number 3 [ 135.920568] usb 4-1: USB disconnect, device number 2 [ 135.920575] usb 4-1.4: USB disconnect, device number 3 [ 135.920582] usb 4-1.4.4: USB disconnect, device number 4 [ 135.921552] usb 5-1: USB disconnect, device number 2 [ 135.927891] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 [ 135.927905] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 01 b9 fc 5c b0 00 00 00 f0 00 00 [ 135.927912] blk_update_request: I/O error, dev sda, sector 7415291056 [ 135.928103] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1635778560 size 8388608 starting block 926911744) [ 135.928114] Buffer I/O error on device sda3, logical block 206539520 [ 135.928133] Buffer I/O error on device sda3, logical block 206539521 [ 135.928137] Buffer I/O error on device sda3, logical block 206539522 [ 135.928142] Buffer I/O error on device sda3, logical block 206539523 [ 135.928150] Buffer I/O error on device sda3, logical block 206539524 [ 135.928155] Buffer I/O error on device sda3, logical block 206539525 [ 135.928159] Buffer I/O error on device sda3, logical block 206539526 [ 135.928164] Buffer I/O error on device sda3, logical block 206539527 [ 135.928169] Buffer I/O error on device sda3, logical block 206539528 [ 135.928173] Buffer I/O error on device sda3, logical block 206539529 [ 135.928723] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1635778560 size 8388608 starting block 926912000) [ 135.929293] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1635778560 size 8388608 starting block 926912256) [ 135.929848] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1635778560 size 8388608 starting block 926912512) [ 135.930392] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1635778560 size 8388608 starting block 926912768) [ 135.930968] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1644167168 size 8388608 starting block 926913024) [ 135.931544] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1644167168 size 8388608 starting block 926913280) [ 135.932095] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1644167168 size 8388608 starting block 926913536) [ 135.932651] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1644167168 size 8388608 starting block 926913792) [ 135.933184] EXT4-fs warning (device sda3): ext4_end_bio:330: I/O error -5 writing to inode 51644863 (offset 1644167168 size 8388608 starting block 926914048) [ 135.935395] EXT4-fs warning (device sda1): ext4_end_bio:330: I/O error -5 writing to inode 68552643 (offset 0 size 4096 starting block 225744158) [ 135.935738] Aborting journal on device sda1-8. [ 135.935747] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 [ 135.935753] EXT4-fs error (device sda1) in ext4_free_blocks:4915: Journal has aborted [ 135.935759] sd 0:0:0:0: [sda] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 01 b9 fc 5d a0 00 00 00 f0 00 00 [ 135.935765] blk_update_request: I/O error, dev sda, sector 7415291296 [ 135.935818] JBD2: Error -5 detected when updating journal superblock for sda1-8. [ 135.935840] EXT4-fs error (device sda1) in ext4_do_update_inode:4755: Journal has aborted [ 135.935845] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.935867] EXT4-fs error (device sda1) in ext4_do_update_inode:4755: Journal has aborted [ 135.935870] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.935889] EXT4-fs error (device sda1) in ext4_ext_remove_space:3052: IO failure [ 135.935892] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.935908] EXT4-fs error (device sda1) in ext4_ext_truncate:4669: Journal has aborted [ 135.935911] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.935934] EXT4-fs error (device sda1) in ext4_orphan_del:2916: Journal has aborted [ 135.935937] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.935957] EXT4-fs error (device sda1) in ext4_do_update_inode:4755: Journal has aborted [ 135.935960] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.935978] EXT4-fs error (device sda1) in ext4_truncate:4027: Journal has aborted [ 135.935981] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.936000] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.936020] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal [ 135.936023] EXT4-fs (sda1): Remounting filesystem read-only [ 135.936026] EXT4-fs (sda1): previous I/O error to superblock detected [ 135.981167] EXT4-fs error (device sda1) in ext4_reserve_inode_write:5226: Journal has aborted [ 136.201686] EXT4-fs error (device sda3): ext4_wait_block_bitmap:515: comm kworker/u8:4: Cannot read block bitmap - block_group = 6304, block_bitmap = 206569472 [ 136.203393] JBD2: Detected IO errors while flushing file data on sda3-8 [ 136.203430] Aborting journal on device sda3-8. [ 136.203525] JBD2: Error -5 detected when updating journal superblock for sda3-8. [ 136.203568] EXT4-fs (sda3): Delayed block allocation failed for inode 51644863 at logical offset 430080 with max blocks 2048 with error 5 [ 136.203571] EXT4-fs (sda3): This should not happen!! Data will be lost

[ 136.203624] EXT4-fs error (device sda3) in ext4_writepages:2655: IO failure [ 136.203631] EXT4-fs (sda3): previous I/O error to superblock detected [ 136.208769] EXT4-fs (sda3): previous I/O error to superblock detected [ 136.208950] EXT4-fs error (device sda3): ext4_journal_check_start:56: Detected aborted journal [ 136.208953] EXT4-fs (sda3): Remounting filesystem read-only [ 136.208958] EXT4-fs (sda3): previous I/O error to superblock detected [ 136.209003] EXT4-fs (sda3): ext4_writepages: jbd2_start: 9223372036854775807 pages, ino 51644863; err -30 [ 136.258281] JBD2: Detected IO errors while flushing file data on sda3-8 [ 136.341519] blk_update_request: I/O error, dev sda, sector 0 [ 136.353446] blk_update_request: I/O error, dev sda, sector 0 [ 136.375002] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00 [ 136.381614] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 16 5e ab 60 00 00 1e 00 [ 136.388225] blk_update_request: I/O error, dev sdb, sector 3002424064 [ 136.393271] EXT4-fs error (device sda1): ext4_find_entry:1454: inode #56363909: comm Plex Media Serv: reading directory lblock 0 [ 136.394922] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 136.395085] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 [ 136.433284] usb 5-1.2: USB disconnect, device number 4 [ 136.444947] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 [ 136.451774] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 16 5e ab 7e 00 00 02 00 [ 136.458488] blk_update_request: I/O error, dev sdb, sector 3002424304 [ 136.465829] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 [ 136.472553] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 16 5e ab 80 00 00 1e 00 [ 136.479384] blk_update_request: I/O error, dev sdb, sector 3002424320 [ 136.730609] usb 5-1.4: USB disconnect, device number 5 [ 136.737233] usb 5-1.4.1: USB disconnect, device number 6 [ 136.755090] blk_update_request: I/O error, dev sdd, sector 0 [ 136.767248] sd 2:0:0:0: [sdd] Synchronizing SCSI cache [ 136.773685] sd 2:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00 [ 136.790503] usb 5-1.4.3: USB disconnect, device number 7 [ 136.827165] usb 5-1.4.4: USB disconnect, device number 8 [ 157.716064] EXT4-fs error (device sda1): ext4_find_entry:1454: inode #56363915: comm Plex Script Hos: reading directory lblock 0

`

ShapeShifter499 commented 6 years ago

@mikescandy How many hard drives you have connected to the hub? Are they self-powered or do they get their power from the hub?

mikescandy commented 6 years ago

2 self powered which I was using for the file transfer test, and 2 portable. I disconnected one of the portable drives now and testing again. edit: no joy, dead again.

ShapeShifter499 commented 6 years ago

@mikescandy that's my setup though my hub is a slightly different model (3 charge only ports vs 1).

Segate 2.5" expansion case with a 750GB Toshiba disk inside WD My Passport 2.5" 3TB WD My Book 3.5" 4TB Self-powered Toshiba Canvio 3.5" 5TB Self-powered

ayufan commented 6 years ago

Can you run usbmon debugger with wireshark/tcpdump to dump all packets?

On Fri, Aug 10, 2018 at 9:48 PM, Lance notifications@github.com wrote:

@mikescandy https://github.com/mikescandy can you test it with just one drive attached?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/ayufan-rock64/linux-build/issues/112#issuecomment-412187039, or mute the thread https://github.com/notifications/unsubscribe-auth/ACTpQYHCc-OKdh7NY0vwDnveKaYVqoycks5uPeONgaJpZM4STaMx .

ShapeShifter499 commented 6 years ago

@mikescandy Can you please test with just one drive attached without any hub in between?

mikescandy commented 6 years ago

I moved the drives around, spread the powered drives apart on the hub and plugged the 2.5'' on the powered slot. also hammering the system (running plex and docker containers) and so far so good, 16GB transferred without crashing. never went above 9 before, usually crashed at about 1, 2 GB

mikescandy commented 6 years ago

@ayufan will try to do that later. never did before, will have to do some reading :)

ShapeShifter499 commented 6 years ago

I also added the below settings to /etc/sysctl.d/99-sysctl.conf in case it helps any. The min_free and the dirty values helped with a different issue with applications crashing due to low RAM.

vm.swappiness=1
vm.min_free_kbytes=40960
vm.dirty_background_ratio=5
vm.dirty_ratio=10

mikescandy commented 6 years ago

it's much more stable than it used to be, but it still crashes. @ayufan here is the usb packet dump. there should be a bit of data transfer and then the issue

out.zip i'm going to add @ShapeShifter499 settings to sysctl.conf and try with a single hd without hub and provide feedback

h31 commented 6 years ago

I can agree with @mikescandy that 4.4.138-1094 is much more stable, but the problem still exists.

Here's my usb dump: https://drive.google.com/file/d/10AMP4aGjHmzX8VmSkS7LqNyiw0_XpImS/view?usp=sharing

I'm not sure that it contains all the necessary data (because the full size of the capture is >1GB). It looks similar to the @mikescandy's one, i.e. an unexpected port reset in packer number 747.

The test was done with @ShapeShifter499's settings applied.

h31 commented 6 years ago

I've made another test, and now the errors are different.

2018-08-11T03:32:18,572914+0300 xhci-hcd xhci-hcd.9.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
2018-08-11T03:32:18,574112+0300 xhci-hcd xhci-hcd.9.auto: Looking for event-dma 000000006da014b0 trb-start 000000006da012d0 trb-end 000000006da014a0 seg-start 000000006da01000 seg-end 000000006da01ff0
2018-08-11T03:32:18,574124+0300 xhci-hcd xhci-hcd.9.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 1
2018-08-11T03:32:18,575286+0300 xhci-hcd xhci-hcd.9.auto: Looking for event-dma 000000006da016e0 trb-start 000000006da012d0 trb-end 000000006da014a0 seg-start 000000006da01000 seg-end 000000006da01ff0

Tried to search for anything interersting in the capture around 03:32:18,572914 and found nothing.

mikescandy commented 6 years ago

also transferringfrom partition to partition on the same drive and from the rock64 to and from one of the hard drive worked fine. copying from usb drive to usb drive triggers the error.

ShapeShifter499 commented 6 years ago

Just throwing out a thought. Who here is booting from a SD card and who is booting from a eMMC? I'm booting from a 128GB PNY branded Micro SD card.

mikescandy commented 6 years ago

I boot from eMMC

Get Outlook for Androidhttps://aka.ms/ghei36

From: Lance notifications@github.com Sent: Saturday, August 11, 2018 7:20:54 PM To: ayufan-rock64/linux-build Cc: mikescandy; Mention Subject: Re: [ayufan-rock64/linux-build] USB 3 hangup during file transfer (#112)

Just throwing out a thought. Who here is booting from a SD card and who is booting from the EMMC? I'm booting from a 128GB PNY branded Micro SD card.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fayufan-rock64%2Flinux-build%2Fissues%2F112%23issuecomment-412292904&data=02%7C01%7C%7C19537ee9a2684352c17008d5ffb72df0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636696084562295554&sdata=jw5wDrMAsk4c0QQl5inBOuyw7tA7q%2BliT7es%2FTQ9mfM%3D&reserved=0, or mute the threadhttps://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FACYQKenzQyFeBnj7R8iHE5AJYpbX2AGwks5uPyCGgaJpZM4STaMx&data=02%7C01%7C%7C19537ee9a2684352c17008d5ffb72df0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636696084562451801&sdata=xCC0CZqL6mHbD3dv7Ebdn5oI1V1McKHxVqbHeMJFB1A%3D&reserved=0.

h31 commented 6 years ago

Can you try this workaround? It worked for me (although I haven't tested it on the recent kernels).

echo 64 > /sys/block/sda/device/max_sectors
echo 64 > /sys/block/sdb/device/max_sectors
echo 64 > /sys/block/sdc/device/max_sectors

if you have more than 3 HDDs, use echo 64 | tee /sys/block/sd?/device/max_sectors

For a typical HDD this will limit the transfer speed to 60 megabytes per second. You can also try lower values (i.e. 32), but the transfer speed will be limited even more.

hermes73 commented 6 years ago

First of all - @ayufan: Thank you very much for your great work around rock64!

I can also confirm the problem on both xenial and bionic with 4.4.132-1075-rockchip-ayufan-ga83beded8524. My Rock64 (4GB RAM) crashes every time under heavy read/write load. I boot from SD, but my rootfs is on ssd. I use another hdd for backup purposes. Every time I try to backup huge amount of data (~100GB) my rock64 crashes, sooner or later. I use my rock64 with a powered usb3 hub, powered ssd and hdd and suitable chipsets in my sata2usb3 enclosures.

See log excerpt from kernel.log:

Aug 13 23:37:53 hermes75 kernel: [  162.879602] sd 1:0:0:0: [sda] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 9f 40 00 00 00 a0 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.879691] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.881112] xhci-hcd xhci-hcd.9.auto: @00000000f282b1e0 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.882454] sd 1:0:0:0: [sda] tag#20 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.882495] sd 1:0:0:0: [sda] tag#20 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 91 00 00 00 00 80 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.882557] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.883960] xhci-hcd xhci-hcd.9.auto: @00000000f282b220 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.885272] sd 1:0:0:0: [sda] tag#9 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.885303] sd 1:0:0:0: [sda] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 9e 20 00 00 01 00 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.885460] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.886860] xhci-hcd xhci-hcd.9.auto: @00000000f282b270 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.888225] sd 1:0:0:0: [sda] tag#19 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.888262] sd 1:0:0:0: [sda] tag#19 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 90 60 00 00 00 60 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.888534] sd 1:0:0:0: [sda] tag#8 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.888566] sd 1:0:0:0: [sda] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 9d 60 00 00 00 20 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.888651] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.890063] xhci-hcd xhci-hcd.9.auto: @00000000f282b310 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.891368] sd 1:0:0:0: [sda] tag#18 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.891400] sd 1:0:0:0: [sda] tag#18 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 8f 80 00 00 00 c0 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.891505] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.892903] xhci-hcd xhci-hcd.9.auto: @00000000f282b370 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.894219] sd 1:0:0:0: [sda] tag#7 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.894268] sd 1:0:0:0: [sda] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 9c 60 00 00 00 e0 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.894325] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.895722] xhci-hcd xhci-hcd.9.auto: @00000000f282b3c0 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.897066] sd 1:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.897111] sd 1:0:0:0: [sda] tag#17 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 8f 00 00 00 00 40 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.897152] sd 1:0:0:0: [sda] tag#6 uas_eh_abort_handler 0 uas-tag 27 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.897203] sd 1:0:0:0: [sda] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 9b c0 00 00 00 40 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.897274] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.898684] xhci-hcd xhci-hcd.9.auto: @00000000f282b3e0 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.899993] sd 1:0:0:0: [sda] tag#16 uas_eh_abort_handler 0 uas-tag 17 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.900043] sd 1:0:0:0: [sda] tag#16 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 8e a0 00 00 00 40 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.900083] sd 1:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 26 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.900120] sd 1:0:0:0: [sda] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 9a a0 00 00 01 00 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.900178] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.901581] xhci-hcd xhci-hcd.9.auto: @00000000f282b400 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.902909] sd 1:0:0:0: [sda] tag#15 uas_eh_abort_handler 0 uas-tag 16 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.902958] sd 1:0:0:0: [sda] tag#15 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 8e 60 00 00 00 20 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.902997] sd 1:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.903034] sd 1:0:0:0: [sda] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 99 20 00 00 01 20 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.903090] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.904493] xhci-hcd xhci-hcd.9.auto: @00000000f282b420 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.905815] sd 1:0:0:0: [sda] tag#14 uas_eh_abort_handler 0 uas-tag 15 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.905864] sd 1:0:0:0: [sda] tag#14 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 8d a0 00 00 00 a0 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.905903] sd 1:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.905940] sd 1:0:0:0: [sda] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 98 a0 00 00 00 60 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.906000] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.907405] xhci-hcd xhci-hcd.9.auto: @00000000f282b440 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.908712] sd 1:0:0:0: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 30 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.908761] sd 1:0:0:0: [sda] tag#29 CDB: opcode=0x88 88 00 00 00 00 00 00 0f 4d 60 00 00 00 20 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.908964] sd 1:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.908998] sd 1:0:0:0: [sda] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 98 20 00 00 00 60 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.909063] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.910141] xhci-hcd xhci-hcd.9.auto: @00000000f282b460 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.911125] sd 1:0:0:0: [sda] tag#27 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.911142] sd 1:0:0:0: [sda] tag#27 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 97 a0 00 00 00 60 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.911183] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.912245] xhci-hcd xhci-hcd.9.auto: @00000000f282b480 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.913212] sd 1:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.913233] sd 1:0:0:0: [sda] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 96 80 00 00 01 00 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.913279] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.914340] xhci-hcd xhci-hcd.9.auto: @00000000f282b4a0 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.915313] sd 1:0:0:0: [sda] tag#26 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.915333] sd 1:0:0:0: [sda] tag#26 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 95 20 00 00 00 e0 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.915367] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.916429] xhci-hcd xhci-hcd.9.auto: @00000000f282b4c0 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.917400] sd 1:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 25 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.917420] sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 94 80 00 00 00 60 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.917454] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.918514] xhci-hcd xhci-hcd.9.auto: @00000000f282b4e0 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.919476] sd 1:0:0:0: [sda] tag#25 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.919496] sd 1:0:0:0: [sda] tag#25 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 94 40 00 00 00 20 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.919528] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.920588] xhci-hcd xhci-hcd.9.auto: @00000000f282b500 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.921545] sd 1:0:0:0: [sda] tag#24 uas_eh_abort_handler 0 uas-tag 24 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.921566] sd 1:0:0:0: [sda] tag#24 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 93 a0 00 00 00 80 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.921602] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.922662] xhci-hcd xhci-hcd.9.auto: @00000000f282b520 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.923623] sd 1:0:0:0: [sda] tag#23 uas_eh_abort_handler 0 uas-tag 23 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.923644] sd 1:0:0:0: [sda] tag#23 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 93 40 00 00 00 40 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.923682] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.924742] xhci-hcd xhci-hcd.9.auto: @00000000f282b540 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.925701] sd 1:0:0:0: [sda] tag#22 uas_eh_abort_handler 0 uas-tag 22 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.925718] sd 1:0:0:0: [sda] tag#22 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 92 20 00 00 01 00 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.925755] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.926814] xhci-hcd xhci-hcd.9.auto: @00000000f282b560 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.927786] sd 1:0:0:0: [sda] tag#21 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT 
Aug 13 23:37:53 hermes75 kernel: [  162.927806] sd 1:0:0:0: [sda] tag#21 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d 91 a0 00 00 00 60 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.927835] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.928894] xhci-hcd xhci-hcd.9.auto: @00000000f282b580 00000000 00000000 1b000000 04088000
Aug 13 23:37:53 hermes75 kernel: [  162.929855] sd 1:0:0:0: [sda] tag#28 uas_eh_abort_handler 0 uas-tag 29 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.929875] sd 1:0:0:0: [sda] tag#28 CDB: opcode=0x88 88 00 00 00 00 00 00 05 81 e0 00 00 00 20 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.929974] sd 1:0:0:0: [sda] tag#13 uas_eh_abort_handler 0 uas-tag 28 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.929987] sd 1:0:0:0: [sda] tag#13 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d 94 40 00 00 00 20 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.930011] sd 1:0:0:0: [sda] tag#12 uas_eh_abort_handler 0 uas-tag 14 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.930022] sd 1:0:0:0: [sda] tag#12 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d 93 a0 00 00 00 80 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.930038] sd 1:0:0:0: [sda] tag#11 uas_eh_abort_handler 0 uas-tag 13 inflight: 
Aug 13 23:37:53 hermes75 kernel: [  162.930049] sd 1:0:0:0: [sda] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d 93 40 00 00 00 40 00 00
Aug 13 23:37:53 hermes75 kernel: [  162.930105] scsi host1: uas_eh_bus_reset_handler start
Aug 13 23:37:53 hermes75 kernel: [  162.930143] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.931174] xhci-hcd xhci-hcd.9.auto: @00000000f282b5a0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  162.932155] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.933177] xhci-hcd xhci-hcd.9.auto: @00000000f282b5c0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  162.934141] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.940556] xhci-hcd xhci-hcd.9.auto: @00000000f282b5e0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  162.947021] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.953546] xhci-hcd xhci-hcd.9.auto: @00000000f282b600 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  162.959957] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.965923] xhci-hcd xhci-hcd.9.auto: @00000000f282b620 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  162.971852] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.977823] xhci-hcd xhci-hcd.9.auto: @00000000f282b640 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  162.983731] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  162.989697] xhci-hcd xhci-hcd.9.auto: @00000000f282b660 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  162.995628] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.001633] xhci-hcd xhci-hcd.9.auto: @00000000f282b680 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.007602] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.013587] xhci-hcd xhci-hcd.9.auto: @00000000f282b6a0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.019530] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.025513] xhci-hcd xhci-hcd.9.auto: @00000000f282b6c0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.031450] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.037434] xhci-hcd xhci-hcd.9.auto: @00000000f282b6e0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.043364] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.049348] xhci-hcd xhci-hcd.9.auto: @00000000f282b700 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.055305] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.061287] xhci-hcd xhci-hcd.9.auto: @00000000f282b720 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.067220] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.073240] xhci-hcd xhci-hcd.9.auto: @00000000f282b740 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.079288] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.085307] xhci-hcd xhci-hcd.9.auto: @00000000f282b760 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.091337] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.097355] xhci-hcd xhci-hcd.9.auto: @00000000f282b780 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.103404] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.109437] xhci-hcd xhci-hcd.9.auto: @00000000f282b7a0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.115470] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.121488] xhci-hcd xhci-hcd.9.auto: @00000000f282b7c0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.127467] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.133478] xhci-hcd xhci-hcd.9.auto: @00000000f282b7e0 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.139457] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.145475] xhci-hcd xhci-hcd.9.auto: @00000000f282b800 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.151462] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:37:53 hermes75 kernel: [  163.157478] xhci-hcd xhci-hcd.9.auto: @00000000f282b820 00000000 00000000 1b000000 04058000
Aug 13 23:37:53 hermes75 kernel: [  163.227627] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd
Aug 13 23:37:53 hermes75 kernel: [  163.241762] scsi host1: uas_eh_bus_reset_handler success
Aug 13 23:38:24 hermes75 kernel: [  193.856220] sd 1:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.856259] sd 1:0:0:0: [sda] tag#17 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d ba 20 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.856341] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  193.873610] xhci-hcd xhci-hcd.9.auto: @00000000f282b750 00000000 00000000 1b000000 04088000
Aug 13 23:38:24 hermes75 kernel: [  193.890789] sd 1:0:0:0: [sda] tag#26 uas_eh_abort_handler 0 uas-tag 27 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.890847] sd 1:0:0:0: [sda] tag#26 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b9 e0 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.890991] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  193.908256] xhci-hcd xhci-hcd.9.auto: @00000000f282b780 00000000 00000000 1b000000 04088000
Aug 13 23:38:24 hermes75 kernel: [  193.925427] sd 1:0:0:0: [sda] tag#16 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.925464] sd 1:0:0:0: [sda] tag#16 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b9 20 00 00 00 a0 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.925575] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  193.942843] xhci-hcd xhci-hcd.9.auto: @00000000f282b7f0 00000000 00000000 1b000000 04088000
Aug 13 23:38:24 hermes75 kernel: [  193.960038] sd 1:0:0:0: [sda] tag#14 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.960095] sd 1:0:0:0: [sda] tag#14 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b8 e0 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.960741] sd 1:0:0:0: [sda] tag#13 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.960769] sd 1:0:0:0: [sda] tag#13 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b8 a0 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.960827] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  193.972870] xhci-hcd xhci-hcd.9.auto: @00000000f282b870 00000000 00000000 1b000000 04088000
Aug 13 23:38:24 hermes75 kernel: [  193.984835] sd 1:0:0:0: [sda] tag#12 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.984868] sd 1:0:0:0: [sda] tag#12 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b8 40 00 00 00 40 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.985347] sd 1:0:0:0: [sda] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.985375] sd 1:0:0:0: [sda] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b9 20 00 00 00 a0 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.985561] sd 1:0:0:0: [sda] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.985583] sd 1:0:0:0: [sda] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b8 e0 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.985775] sd 1:0:0:0: [sda] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.985791] sd 1:0:0:0: [sda] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b8 a0 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.985935] sd 1:0:0:0: [sda] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.985951] sd 1:0:0:0: [sda] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b8 40 00 00 00 40 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.986095] sd 1:0:0:0: [sda] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.986110] sd 1:0:0:0: [sda] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b7 a0 00 00 00 80 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.986239] sd 1:0:0:0: [sda] tag#6 uas_eh_abort_handler 0 uas-tag 28 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.986256] sd 1:0:0:0: [sda] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b6 40 00 00 01 40 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.986628] sd 1:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  193.986646] sd 1:0:0:0: [sda] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b6 00 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  193.986763] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  193.995855] xhci-hcd xhci-hcd.9.auto: @00000000f282b980 00000000 00000000 1b000000 04088000
Aug 13 23:38:24 hermes75 kernel: [  194.004862] sd 1:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.004886] sd 1:0:0:0: [sda] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b5 20 00 00 00 a0 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.005022] sd 1:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.005039] sd 1:0:0:0: [sda] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b3 40 00 00 01 c0 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.005348] sd 1:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.005367] sd 1:0:0:0: [sda] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b2 20 00 00 01 00 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.005509] sd 1:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.005524] sd 1:0:0:0: [sda] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b1 c0 00 00 00 40 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.005638] sd 1:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.005654] sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 e0 00 00 00 60 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.005781] sd 1:0:0:0: [sda] tag#27 uas_eh_abort_handler 0 uas-tag 30 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.005796] sd 1:0:0:0: [sda] tag#27 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 a0 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.005859] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.014955] xhci-hcd xhci-hcd.9.auto: @00000000f282ba60 00000000 00000000 1b000000 04088000
Aug 13 23:38:24 hermes75 kernel: [  194.023953] sd 1:0:0:0: [sda] tag#25 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.023974] sd 1:0:0:0: [sda] tag#25 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 60 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024312] sd 1:0:0:0: [sda] tag#24 uas_eh_abort_handler 0 uas-tag 29 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.024334] sd 1:0:0:0: [sda] tag#24 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 20 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024548] sd 1:0:0:0: [sda] tag#23 uas_eh_abort_handler 0 uas-tag 26 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.024565] sd 1:0:0:0: [sda] tag#23 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d af 60 00 00 00 60 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024739] sd 1:0:0:0: [sda] tag#22 uas_eh_abort_handler 0 uas-tag 25 inflight: CMD OUT 
Aug 13 23:38:24 hermes75 kernel: [  194.024752] sd 1:0:0:0: [sda] tag#22 CDB: opcode=0x8a 8a 00 00 00 00 00 02 78 6c 30 00 00 02 00 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024830] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.024842] sd 1:0:0:0: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 24 inflight: 
Aug 13 23:38:24 hermes75 kernel: [  194.024850] sd 1:0:0:0: [sda] tag#29 CDB: opcode=0x8a 8a 00 00 00 00 00 02 78 68 30 00 00 02 00 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024863] sd 1:0:0:0: [sda] tag#28 uas_eh_abort_handler 0 uas-tag 23 inflight: 
Aug 13 23:38:24 hermes75 kernel: [  194.024870] sd 1:0:0:0: [sda] tag#28 CDB: opcode=0x8a 8a 00 00 00 00 00 02 78 64 30 00 00 04 00 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024882] sd 1:0:0:0: [sda] tag#21 uas_eh_abort_handler 0 uas-tag 22 inflight: 
Aug 13 23:38:24 hermes75 kernel: [  194.024889] sd 1:0:0:0: [sda] tag#21 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b7 a0 00 00 00 80 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024901] sd 1:0:0:0: [sda] tag#20 uas_eh_abort_handler 0 uas-tag 21 inflight: 
Aug 13 23:38:24 hermes75 kernel: [  194.024908] sd 1:0:0:0: [sda] tag#20 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b6 40 00 00 01 40 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024919] sd 1:0:0:0: [sda] tag#19 uas_eh_abort_handler 0 uas-tag 20 inflight: 
Aug 13 23:38:24 hermes75 kernel: [  194.024927] sd 1:0:0:0: [sda] tag#19 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b6 00 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024938] sd 1:0:0:0: [sda] tag#18 uas_eh_abort_handler 0 uas-tag 19 inflight: 
Aug 13 23:38:24 hermes75 kernel: [  194.024946] sd 1:0:0:0: [sda] tag#18 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b5 20 00 00 00 a0 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.024957] sd 1:0:0:0: [sda] tag#15 uas_eh_abort_handler 0 uas-tag 16 inflight: 
Aug 13 23:38:24 hermes75 kernel: [  194.024964] sd 1:0:0:0: [sda] tag#15 CDB: opcode=0x88 88 00 00 00 00 00 00 0f 4d 60 00 00 00 20 00 00
Aug 13 23:38:24 hermes75 kernel: [  194.032406] xhci-hcd xhci-hcd.9.auto: @00000000f282bb00 00000000 00000000 1b000000 04088000
Aug 13 23:38:24 hermes75 kernel: [  194.039815] usb 5-1.4: stat urb: no pending cmd for uas-tag 25
Aug 13 23:38:24 hermes75 kernel: [  194.047051] scsi host1: uas_eh_bus_reset_handler start
Aug 13 23:38:24 hermes75 kernel: [  194.047100] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.053617] xhci-hcd xhci-hcd.9.auto: @00000000f282bb30 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.060103] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.066616] xhci-hcd xhci-hcd.9.auto: @00000000f282bb50 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.073107] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.079207] xhci-hcd xhci-hcd.9.auto: @00000000f282bb70 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.085258] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.091355] xhci-hcd xhci-hcd.9.auto: @00000000f282bb90 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.097404] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.103497] xhci-hcd xhci-hcd.9.auto: @00000000f282bbb0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.109535] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.115628] xhci-hcd xhci-hcd.9.auto: @00000000f282bbd0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.121673] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.127769] xhci-hcd xhci-hcd.9.auto: @00000000f282bbf0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.133840] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.139938] xhci-hcd xhci-hcd.9.auto: @00000000f282bc10 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.145950] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.152042] xhci-hcd xhci-hcd.9.auto: @00000000f282bc30 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.158055] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.164150] xhci-hcd xhci-hcd.9.auto: @00000000f282bc50 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.170165] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.176265] xhci-hcd xhci-hcd.9.auto: @00000000f282bc70 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.182295] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.188387] xhci-hcd xhci-hcd.9.auto: @00000000f282bc90 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.194387] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.200470] xhci-hcd xhci-hcd.9.auto: @00000000f282bcb0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.206482] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.212573] xhci-hcd xhci-hcd.9.auto: @00000000f282bcd0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.218573] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.224663] xhci-hcd xhci-hcd.9.auto: @00000000f282bcf0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.230649] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.236733] xhci-hcd xhci-hcd.9.auto: @00000000f282bd10 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.242719] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.248799] xhci-hcd xhci-hcd.9.auto: @00000000f282bd30 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.254789] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.260868] xhci-hcd xhci-hcd.9.auto: @00000000f282bd50 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.266849] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.272919] xhci-hcd xhci-hcd.9.auto: @00000000f282bd70 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.278896] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.284966] xhci-hcd xhci-hcd.9.auto: @00000000f282bd90 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.290942] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.297011] xhci-hcd xhci-hcd.9.auto: @00000000f282bdb0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.302980] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:24 hermes75 kernel: [  194.309048] xhci-hcd xhci-hcd.9.auto: @00000000f282bdd0 00000000 00000000 1b000000 04058000
Aug 13 23:38:24 hermes75 kernel: [  194.378300] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd
Aug 13 23:38:24 hermes75 kernel: [  194.390821] scsi host1: uas_eh_bus_reset_handler success
Aug 13 23:38:55 hermes75 kernel: [  224.833063] sd 1:0:0:0: [sda] tag#13 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.833105] sd 1:0:0:0: [sda] tag#13 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d ba 80 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.833188] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  224.850632] xhci-hcd xhci-hcd.9.auto: @00000000f282bea0 00000000 00000000 1b000000 04088001
Aug 13 23:38:55 hermes75 kernel: [  224.867997] sd 1:0:0:0: [sda] tag#12 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.868057] sd 1:0:0:0: [sda] tag#12 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d ba 20 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.868290] sd 1:0:0:0: [sda] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.868324] sd 1:0:0:0: [sda] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b9 e0 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.868506] sd 1:0:0:0: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 30 inflight: CMD IN 
Aug 13 23:38:55 hermes75 kernel: [  224.868538] sd 1:0:0:0: [sda] tag#29 CDB: opcode=0x88 88 00 00 00 00 00 00 05 db 60 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.868630] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  224.886017] xhci-hcd xhci-hcd.9.auto: @00000000f282bf00 00000000 00000000 1b000000 04078001
Aug 13 23:38:55 hermes75 kernel: [  224.903203] sd 1:0:0:0: [sda] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.903242] sd 1:0:0:0: [sda] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d be 80 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.903503] sd 1:0:0:0: [sda] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.903536] sd 1:0:0:0: [sda] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d be 00 00 00 00 40 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.903728] sd 1:0:0:0: [sda] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.903759] sd 1:0:0:0: [sda] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d bd 80 00 00 00 40 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.903861] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  224.921150] xhci-hcd xhci-hcd.9.auto: @00000000f282bfc0 00000000 00000000 1b000000 04088001
Aug 13 23:38:55 hermes75 kernel: [  224.938335] sd 1:0:0:0: [sda] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.938405] sd 1:0:0:0: [sda] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d bd 20 00 00 00 40 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.938640] sd 1:0:0:0: [sda] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.938675] sd 1:0:0:0: [sda] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d bc 60 00 00 00 a0 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.938760] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  224.946287] xhci-hcd xhci-hcd.9.auto: @00000000f282b060 00000000 00000000 1b000000 04088000
Aug 13 23:38:55 hermes75 kernel: [  224.953721] sd 1:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.953751] sd 1:0:0:0: [sda] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d bb e0 00 00 00 60 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.953832] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  224.961350] xhci-hcd xhci-hcd.9.auto: @00000000f282b0b0 00000000 00000000 1b000000 04088000
Aug 13 23:38:55 hermes75 kernel: [  224.968763] sd 1:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.968782] sd 1:0:0:0: [sda] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d bb a0 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.968952] sd 1:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.968969] sd 1:0:0:0: [sda] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d bb 40 00 00 00 40 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.969005] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  224.976522] xhci-hcd xhci-hcd.9.auto: @00000000f282b130 00000000 00000000 1b000000 04088000
Aug 13 23:38:55 hermes75 kernel: [  224.983945] sd 1:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.983965] sd 1:0:0:0: [sda] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d ba c0 00 00 00 60 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.984092] sd 1:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.984108] sd 1:0:0:0: [sda] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d ba 80 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.984227] sd 1:0:0:0: [sda] tag#28 uas_eh_abort_handler 0 uas-tag 29 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.984241] sd 1:0:0:0: [sda] tag#28 CDB: opcode=0x88 88 00 00 00 00 00 00 0f 4d 60 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.984258] sd 1:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.984270] sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b5 20 00 00 00 a0 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.984430] sd 1:0:0:0: [sda] tag#27 uas_eh_abort_handler 0 uas-tag 28 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.984447] sd 1:0:0:0: [sda] tag#27 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b6 00 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.984594] sd 1:0:0:0: [sda] tag#26 uas_eh_abort_handler 0 uas-tag 27 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.984609] sd 1:0:0:0: [sda] tag#26 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b6 40 00 00 01 40 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.984722] sd 1:0:0:0: [sda] tag#25 uas_eh_abort_handler 0 uas-tag 26 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.984734] sd 1:0:0:0: [sda] tag#25 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0d b7 a0 00 00 00 80 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.984836] sd 1:0:0:0: [sda] tag#24 uas_eh_abort_handler 0 uas-tag 25 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.984847] sd 1:0:0:0: [sda] tag#24 CDB: opcode=0x8a 8a 00 00 00 00 00 02 78 64 30 00 00 04 00 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.985025] sd 1:0:0:0: [sda] tag#23 uas_eh_abort_handler 0 uas-tag 24 inflight: CMD OUT 
Aug 13 23:38:55 hermes75 kernel: [  224.985038] sd 1:0:0:0: [sda] tag#23 CDB: opcode=0x8a 8a 00 00 00 00 00 02 78 68 30 00 00 02 00 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.985084] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  224.991550] xhci-hcd xhci-hcd.9.auto: @00000000f282b2c0 00000000 00000000 1b000000 04088000
Aug 13 23:38:55 hermes75 kernel: [  224.997943] sd 1:0:0:0: [sda] tag#22 uas_eh_abort_handler 0 uas-tag 23 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.997969] sd 1:0:0:0: [sda] tag#22 CDB: opcode=0x8a 8a 00 00 00 00 00 02 78 6c 30 00 00 02 00 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.997987] sd 1:0:0:0: [sda] tag#21 uas_eh_abort_handler 0 uas-tag 22 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.997996] sd 1:0:0:0: [sda] tag#21 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d af 60 00 00 00 60 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998010] sd 1:0:0:0: [sda] tag#20 uas_eh_abort_handler 0 uas-tag 21 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.998020] sd 1:0:0:0: [sda] tag#20 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 20 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998039] sd 1:0:0:0: [sda] tag#19 uas_eh_abort_handler 0 uas-tag 20 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.998051] sd 1:0:0:0: [sda] tag#19 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 60 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998064] sd 1:0:0:0: [sda] tag#18 uas_eh_abort_handler 0 uas-tag 19 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.998073] sd 1:0:0:0: [sda] tag#18 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 a0 00 00 00 20 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998096] sd 1:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.998105] sd 1:0:0:0: [sda] tag#17 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b0 e0 00 00 00 60 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998121] sd 1:0:0:0: [sda] tag#16 uas_eh_abort_handler 0 uas-tag 17 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.998131] sd 1:0:0:0: [sda] tag#16 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b1 c0 00 00 00 40 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998144] sd 1:0:0:0: [sda] tag#15 uas_eh_abort_handler 0 uas-tag 16 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.998153] sd 1:0:0:0: [sda] tag#15 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b2 20 00 00 01 00 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998166] sd 1:0:0:0: [sda] tag#14 uas_eh_abort_handler 0 uas-tag 15 inflight: 
Aug 13 23:38:55 hermes75 kernel: [  224.998176] sd 1:0:0:0: [sda] tag#14 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2d b3 40 00 00 01 c0 00 00
Aug 13 23:38:55 hermes75 kernel: [  224.998224] scsi host1: uas_eh_bus_reset_handler start
Aug 13 23:38:55 hermes75 kernel: [  224.998267] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.004737] xhci-hcd xhci-hcd.9.auto: @00000000f282b300 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.011139] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.017575] xhci-hcd xhci-hcd.9.auto: @00000000f282b320 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.023921] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.030373] xhci-hcd xhci-hcd.9.auto: @00000000f282b340 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.036753] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.043200] xhci-hcd xhci-hcd.9.auto: @00000000f282b360 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.049566] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.056012] xhci-hcd xhci-hcd.9.auto: @00000000f282b380 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.062380] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.068831] xhci-hcd xhci-hcd.9.auto: @00000000f282b3a0 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.075202] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.081663] xhci-hcd xhci-hcd.9.auto: @00000000f282b3c0 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.088039] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.094492] xhci-hcd xhci-hcd.9.auto: @00000000f282b3e0 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.100873] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.107331] xhci-hcd xhci-hcd.9.auto: @00000000f282b400 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.113711] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.120175] xhci-hcd xhci-hcd.9.auto: @00000000f282b420 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.126558] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.133022] xhci-hcd xhci-hcd.9.auto: @00000000f282b440 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.139399] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.145869] xhci-hcd xhci-hcd.9.auto: @00000000f282b460 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.152248] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.158716] xhci-hcd xhci-hcd.9.auto: @00000000f282b480 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.165097] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.171570] xhci-hcd xhci-hcd.9.auto: @00000000f282b4a0 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.177970] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.184441] xhci-hcd xhci-hcd.9.auto: @00000000f282b4c0 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.190827] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.197303] xhci-hcd xhci-hcd.9.auto: @00000000f282b4e0 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.203691] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.210162] xhci-hcd xhci-hcd.9.auto: @00000000f282b500 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.216545] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.223014] xhci-hcd xhci-hcd.9.auto: @00000000f282b520 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.229401] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.235868] xhci-hcd xhci-hcd.9.auto: @00000000f282b540 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.242240] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:38:55 hermes75 kernel: [  225.248703] xhci-hcd xhci-hcd.9.auto: @00000000f282b560 00000000 00000000 1b000000 04058000
Aug 13 23:38:55 hermes75 kernel: [  225.319048] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd
Aug 13 23:38:55 hermes75 kernel: [  225.331636] scsi host1: uas_eh_bus_reset_handler success
Aug 13 23:42:12 hermes75 kernel: [  421.829933] sd 1:0:0:0: [sda] tag#12 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.829974] sd 1:0:0:0: [sda] tag#12 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 06 60 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.830072] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.847440] xhci-hcd xhci-hcd.9.auto: @00000000f282b3f0 00000000 00000000 1b000000 04088000
Aug 13 23:42:12 hermes75 kernel: [  421.864960] sd 1:0:0:0: [sda] tag#11 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.865007] sd 1:0:0:0: [sda] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 06 20 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.865156] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.882527] xhci-hcd xhci-hcd.9.auto: @00000000f282b450 00000000 00000000 1b000000 04088000
Aug 13 23:42:12 hermes75 kernel: [  421.900007] sd 1:0:0:0: [sda] tag#10 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.900046] sd 1:0:0:0: [sda] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 05 c0 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.900185] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.907747] xhci-hcd xhci-hcd.9.auto: @00000000f282b4b0 00000000 00000000 1b000000 04088000
Aug 13 23:42:12 hermes75 kernel: [  421.915242] sd 1:0:0:0: [sda] tag#9 uas_eh_abort_handler 0 uas-tag 30 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.915259] sd 1:0:0:0: [sda] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 05 80 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.915444] sd 1:0:0:0: [sda] tag#8 uas_eh_abort_handler 0 uas-tag 29 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.915460] sd 1:0:0:0: [sda] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 05 00 00 00 00 60 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.915511] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.923061] xhci-hcd xhci-hcd.9.auto: @00000000f282b520 00000000 00000000 1b000000 04088000
Aug 13 23:42:12 hermes75 kernel: [  421.930652] sd 1:0:0:0: [sda] tag#7 uas_eh_abort_handler 0 uas-tag 28 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.930678] sd 1:0:0:0: [sda] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 03 c0 00 00 01 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.930744] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.937220] xhci-hcd xhci-hcd.9.auto: @00000000f282b590 00000000 00000000 1b000000 04088000
Aug 13 23:42:12 hermes75 kernel: [  421.943650] sd 1:0:0:0: [sda] tag#6 uas_eh_abort_handler 0 uas-tag 27 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.943666] sd 1:0:0:0: [sda] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 03 20 00 00 00 80 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.943843] sd 1:0:0:0: [sda] tag#5 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.943858] sd 1:0:0:0: [sda] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 02 e0 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.943958] sd 1:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.943970] sd 1:0:0:0: [sda] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 02 a0 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.944074] sd 1:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 26 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.944085] sd 1:0:0:0: [sda] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 02 40 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.944200] sd 1:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.944211] sd 1:0:0:0: [sda] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 01 20 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.944328] sd 1:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 25 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.944339] sd 1:0:0:0: [sda] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 00 c0 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.944479] sd 1:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 24 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.944490] sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 00 60 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.944587] sd 1:0:0:0: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 23 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.944598] sd 1:0:0:0: [sda] tag#29 CDB: opcode=0x8a 8a 00 00 00 00 00 00 32 00 00 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.944685] sd 1:0:0:0: [sda] tag#28 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.944695] sd 1:0:0:0: [sda] tag#28 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 ff c0 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.944746] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.951234] xhci-hcd xhci-hcd.9.auto: @00000000f282b700 00000000 00000000 1b000000 04088000
Aug 13 23:42:12 hermes75 kernel: [  421.958028] sd 1:0:0:0: [sda] tag#27 uas_eh_abort_handler 0 uas-tag 22 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.958046] sd 1:0:0:0: [sda] tag#27 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 ff 60 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.958168] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.964234] xhci-hcd xhci-hcd.9.auto: @00000000f282b740 00000000 00000000 1b000000 04088000
Aug 13 23:42:12 hermes75 kernel: [  421.970256] sd 1:0:0:0: [sda] tag#15 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.970272] sd 1:0:0:0: [sda] tag#15 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 ff 00 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970399] sd 1:0:0:0: [sda] tag#26 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT 
Aug 13 23:42:12 hermes75 kernel: [  421.970411] sd 1:0:0:0: [sda] tag#26 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 fd 00 00 00 01 c0 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970541] sd 1:0:0:0: [sda] tag#25 uas_eh_abort_handler 0 uas-tag 19 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970553] sd 1:0:0:0: [sda] tag#25 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 fb 80 00 00 01 60 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970566] sd 1:0:0:0: [sda] tag#24 uas_eh_abort_handler 0 uas-tag 18 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970575] sd 1:0:0:0: [sda] tag#24 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 fb 20 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970587] sd 1:0:0:0: [sda] tag#23 uas_eh_abort_handler 0 uas-tag 17 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970596] sd 1:0:0:0: [sda] tag#23 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 fa e0 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970608] sd 1:0:0:0: [sda] tag#22 uas_eh_abort_handler 0 uas-tag 16 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970616] sd 1:0:0:0: [sda] tag#22 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f9 00 00 00 01 c0 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970629] sd 1:0:0:0: [sda] tag#21 uas_eh_abort_handler 0 uas-tag 15 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970637] sd 1:0:0:0: [sda] tag#21 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f8 a0 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970649] sd 1:0:0:0: [sda] tag#20 uas_eh_abort_handler 0 uas-tag 14 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970658] sd 1:0:0:0: [sda] tag#20 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f8 60 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970670] sd 1:0:0:0: [sda] tag#19 uas_eh_abort_handler 0 uas-tag 13 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970679] sd 1:0:0:0: [sda] tag#19 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f7 e0 00 00 00 60 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970691] sd 1:0:0:0: [sda] tag#18 uas_eh_abort_handler 0 uas-tag 12 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970700] sd 1:0:0:0: [sda] tag#18 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f7 60 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970712] sd 1:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 11 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970720] sd 1:0:0:0: [sda] tag#17 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f7 00 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970732] sd 1:0:0:0: [sda] tag#14 uas_eh_abort_handler 0 uas-tag 9 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970741] sd 1:0:0:0: [sda] tag#14 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f6 c0 00 00 00 20 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970753] sd 1:0:0:0: [sda] tag#13 uas_eh_abort_handler 0 uas-tag 7 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970762] sd 1:0:0:0: [sda] tag#13 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f6 40 00 00 00 60 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970814] sd 1:0:0:0: [sda] tag#16 uas_eh_abort_handler 0 uas-tag 10 inflight: 
Aug 13 23:42:12 hermes75 kernel: [  421.970834] sd 1:0:0:0: [sda] tag#16 CDB: opcode=0x8a 8a 00 00 00 00 00 00 31 f5 e0 00 00 00 40 00 00
Aug 13 23:42:12 hermes75 kernel: [  421.970902] scsi host1: uas_eh_bus_reset_handler start
Aug 13 23:42:12 hermes75 kernel: [  421.970947] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.977034] xhci-hcd xhci-hcd.9.auto: @00000000f282b7c0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  421.983065] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  421.989135] xhci-hcd xhci-hcd.9.auto: @00000000f282b7e0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  421.995114] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.001163] xhci-hcd xhci-hcd.9.auto: @00000000f282b800 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.007132] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.013188] xhci-hcd xhci-hcd.9.auto: @00000000f282b820 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.019161] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.025226] xhci-hcd xhci-hcd.9.auto: @00000000f282b840 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.031191] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.037248] xhci-hcd xhci-hcd.9.auto: @00000000f282b860 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.043214] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.049268] xhci-hcd xhci-hcd.9.auto: @00000000f282b880 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.055226] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.061277] xhci-hcd xhci-hcd.9.auto: @00000000f282b8a0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.067242] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.073295] xhci-hcd xhci-hcd.9.auto: @00000000f282b8c0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.079256] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.085307] xhci-hcd xhci-hcd.9.auto: @00000000f282b8e0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.091271] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.097326] xhci-hcd xhci-hcd.9.auto: @00000000f282b900 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.103292] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.109350] xhci-hcd xhci-hcd.9.auto: @00000000f282b920 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.115309] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.121370] xhci-hcd xhci-hcd.9.auto: @00000000f282b940 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.127332] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.133382] xhci-hcd xhci-hcd.9.auto: @00000000f282b960 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.139340] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.145388] xhci-hcd xhci-hcd.9.auto: @00000000f282b980 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.151356] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.157402] xhci-hcd xhci-hcd.9.auto: @00000000f282b9a0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.163370] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.169420] xhci-hcd xhci-hcd.9.auto: @00000000f282b9c0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.175365] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:42:12 hermes75 kernel: [  422.181406] xhci-hcd xhci-hcd.9.auto: @00000000f282b9e0 00000000 00000000 1b000000 04058000
Aug 13 23:42:12 hermes75 kernel: [  422.250926] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd

Aug 13 23:47:46 hermes75 kernel: [  178.978937] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd
Aug 13 23:47:46 hermes75 kernel: [  178.991490] scsi host1: uas_eh_bus_reset_handler success
Aug 13 23:49:04 hermes75 kernel: [  256.830804] sd 1:0:0:0: [sdb] tag#21 uas_eh_abort_handler 0 uas-tag 22 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.830846] sd 1:0:0:0: [sdb] tag#21 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 33 80 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.830930] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.832345] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9c60 00000000 00000000 1b000000 04088000
Aug 13 23:49:04 hermes75 kernel: [  256.833841] sd 1:0:0:0: [sdb] tag#20 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.833878] sd 1:0:0:0: [sdb] tag#20 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 2d a0 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.834200] sd 1:0:0:0: [sdb] tag#19 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.834236] sd 1:0:0:0: [sdb] tag#19 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 2c 00 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.834313] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.835730] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9ce0 00000000 00000000 1b000000 04088000
Aug 13 23:49:04 hermes75 kernel: [  256.837221] sd 1:0:0:0: [sdb] tag#18 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.837258] sd 1:0:0:0: [sdb] tag#18 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 2a 40 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.837431] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.838850] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9d90 00000000 00000000 1b000000 04088000
Aug 13 23:49:04 hermes75 kernel: [  256.840308] sd 1:0:0:0: [sdb] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.840352] sd 1:0:0:0: [sdb] tag#17 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 23 c0 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.840632] sd 1:0:0:0: [sdb] tag#16 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.840667] sd 1:0:0:0: [sdb] tag#16 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 21 00 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.840923] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.842342] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9e90 00000000 00000000 1b000000 04088000
Aug 13 23:49:04 hermes75 kernel: [  256.843888] sd 1:0:0:0: [sdb] tag#15 uas_eh_abort_handler 0 uas-tag 16 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.843927] sd 1:0:0:0: [sdb] tag#15 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 20 80 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.844170] sd 1:0:0:0: [sdb] tag#14 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.844202] sd 1:0:0:0: [sdb] tag#14 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 20 00 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.844373] sd 1:0:0:0: [sdb] tag#13 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT 
Aug 13 23:49:04 hermes75 kernel: [  256.844404] sd 1:0:0:0: [sdb] tag#13 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 1a 60 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.844569] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.845985] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9fb0 00000000 00000000 1b000000 04088000
Aug 13 23:49:04 hermes75 kernel: [  256.847490] sd 1:0:0:0: [sdb] tag#12 uas_eh_abort_handler 0 uas-tag 13 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.847527] sd 1:0:0:0: [sdb] tag#12 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 18 20 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.847566] sd 1:0:0:0: [sdb] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.847595] sd 1:0:0:0: [sdb] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 17 80 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.847651] sd 1:0:0:0: [sdb] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.847679] sd 1:0:0:0: [sdb] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 17 40 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.847716] sd 1:0:0:0: [sdb] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.847744] sd 1:0:0:0: [sdb] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 17 00 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.847830] sd 1:0:0:0: [sdb] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.847868] sd 1:0:0:0: [sdb] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 16 00 00 00 00 c0 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.847907] sd 1:0:0:0: [sdb] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.847934] sd 1:0:0:0: [sdb] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 15 a0 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.847972] sd 1:0:0:0: [sdb] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.847999] sd 1:0:0:0: [sdb] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 15 60 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848036] sd 1:0:0:0: [sdb] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848063] sd 1:0:0:0: [sdb] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 11 00 00 00 00 80 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848100] sd 1:0:0:0: [sdb] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848127] sd 1:0:0:0: [sdb] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 10 60 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848164] sd 1:0:0:0: [sdb] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848191] sd 1:0:0:0: [sdb] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 10 20 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848229] sd 1:0:0:0: [sdb] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848256] sd 1:0:0:0: [sdb] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0f e0 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848292] sd 1:0:0:0: [sdb] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848320] sd 1:0:0:0: [sdb] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0f 60 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848356] sd 1:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848383] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0e 80 00 00 00 c0 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848423] sd 1:0:0:0: [sdb] tag#29 uas_eh_abort_handler 0 uas-tag 30 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848450] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0d e0 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848487] sd 1:0:0:0: [sdb] tag#28 uas_eh_abort_handler 0 uas-tag 29 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848514] sd 1:0:0:0: [sdb] tag#28 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0d 80 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848551] sd 1:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 28 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848578] sd 1:0:0:0: [sdb] tag#27 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0d 20 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848614] sd 1:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 27 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848641] sd 1:0:0:0: [sdb] tag#26 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0c 80 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848678] sd 1:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 26 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848705] sd 1:0:0:0: [sdb] tag#25 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0b 80 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848820] sd 1:0:0:0: [sdb] tag#24 uas_eh_abort_handler 0 uas-tag 25 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.848888] sd 1:0:0:0: [sdb] tag#24 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 0a 40 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.848962] sd 1:0:0:0: [sdb] tag#23 uas_eh_abort_handler 0 uas-tag 24 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.849014] sd 1:0:0:0: [sdb] tag#23 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 0f 60 00 00 00 20 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.849072] sd 1:0:0:0: [sdb] tag#22 uas_eh_abort_handler 0 uas-tag 23 inflight: 
Aug 13 23:49:04 hermes75 kernel: [  256.849115] sd 1:0:0:0: [sdb] tag#22 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 0e 80 00 00 00 c0 00 00
Aug 13 23:49:04 hermes75 kernel: [  256.849218] scsi host1: uas_eh_bus_reset_handler start
Aug 13 23:49:04 hermes75 kernel: [  256.849295] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.850714] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9020 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.852093] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.853511] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9040 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.854874] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.856288] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9060 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.857666] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.858751] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9080 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.866198] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.873766] xhci-hcd xhci-hcd.9.auto: @00000000f2fe90a0 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.881352] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.888895] xhci-hcd xhci-hcd.9.auto: @00000000f2fe90c0 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.896270] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.903703] xhci-hcd xhci-hcd.9.auto: @00000000f2fe90e0 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.911074] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.917472] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9100 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.923784] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:04 hermes75 kernel: [  256.930182] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9120 00000000 00000000 1b000000 04058001
Aug 13 23:49:04 hermes75 kernel: [  256.999860] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd
Aug 13 23:49:04 hermes75 kernel: [  257.012468] scsi host1: uas_eh_bus_reset_handler success
Aug 13 23:49:42 hermes75 kernel: [  294.847828] sd 1:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 27 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.847870] sd 1:0:0:0: [sdb] tag#26 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 bc 60 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.847966] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.865114] xhci-hcd xhci-hcd.9.auto: @00000000f2fe90e0 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.882397] sd 1:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 26 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.882434] sd 1:0:0:0: [sdb] tag#25 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 ba c0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.882530] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.899688] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9140 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.917471] sd 1:0:0:0: [sdb] tag#24 uas_eh_abort_handler 0 uas-tag 25 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.917493] sd 1:0:0:0: [sdb] tag#24 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 b8 20 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.917571] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.925017] xhci-hcd xhci-hcd.9.auto: @00000000f2fe91b0 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.932409] sd 1:0:0:0: [sdb] tag#23 uas_eh_abort_handler 0 uas-tag 24 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.932426] sd 1:0:0:0: [sdb] tag#23 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 b5 60 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.932498] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.939895] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9210 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.947331] sd 1:0:0:0: [sdb] tag#22 uas_eh_abort_handler 0 uas-tag 23 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.947350] sd 1:0:0:0: [sdb] tag#22 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 ac 80 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.947436] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.953799] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9280 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.960146] sd 1:0:0:0: [sdb] tag#21 uas_eh_abort_handler 0 uas-tag 22 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.960161] sd 1:0:0:0: [sdb] tag#21 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 a8 e0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.960211] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.966569] xhci-hcd xhci-hcd.9.auto: @00000000f2fe92c0 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.972957] sd 1:0:0:0: [sdb] tag#20 uas_eh_abort_handler 0 uas-tag 21 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.972976] sd 1:0:0:0: [sdb] tag#20 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 a7 c0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.973059] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.979017] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9320 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.984949] sd 1:0:0:0: [sdb] tag#19 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.984965] sd 1:0:0:0: [sdb] tag#19 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 a7 60 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.985020] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  294.990981] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9370 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  294.997331] sd 1:0:0:0: [sdb] tag#18 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT 
Aug 13 23:49:42 hermes75 kernel: [  294.997349] sd 1:0:0:0: [sdb] tag#18 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 a6 40 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  294.997424] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  295.003388] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9460 00000000 00000000 1b000000 04088001
Aug 13 23:49:42 hermes75 kernel: [  295.009329] sd 1:0:0:0: [sdb] tag#17 uas_eh_abort_handler 0 uas-tag 18 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009344] sd 1:0:0:0: [sdb] tag#17 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 9f 20 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009358] sd 1:0:0:0: [sdb] tag#16 uas_eh_abort_handler 0 uas-tag 17 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009367] sd 1:0:0:0: [sdb] tag#16 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 9e a0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009387] sd 1:0:0:0: [sdb] tag#15 uas_eh_abort_handler 0 uas-tag 16 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009396] sd 1:0:0:0: [sdb] tag#15 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 9a c0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009408] sd 1:0:0:0: [sdb] tag#13 uas_eh_abort_handler 0 uas-tag 15 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009419] sd 1:0:0:0: [sdb] tag#13 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 92 00 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009431] sd 1:0:0:0: [sdb] tag#12 uas_eh_abort_handler 0 uas-tag 14 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009442] sd 1:0:0:0: [sdb] tag#12 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 90 20 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009455] sd 1:0:0:0: [sdb] tag#11 uas_eh_abort_handler 0 uas-tag 13 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009466] sd 1:0:0:0: [sdb] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 8e e0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009479] sd 1:0:0:0: [sdb] tag#10 uas_eh_abort_handler 0 uas-tag 12 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009487] sd 1:0:0:0: [sdb] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 8c 80 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009499] sd 1:0:0:0: [sdb] tag#9 uas_eh_abort_handler 0 uas-tag 11 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009508] sd 1:0:0:0: [sdb] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 8a e0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009520] sd 1:0:0:0: [sdb] tag#8 uas_eh_abort_handler 0 uas-tag 10 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009528] sd 1:0:0:0: [sdb] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 88 20 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009541] sd 1:0:0:0: [sdb] tag#7 uas_eh_abort_handler 0 uas-tag 9 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009549] sd 1:0:0:0: [sdb] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 7f 20 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009561] sd 1:0:0:0: [sdb] tag#6 uas_eh_abort_handler 0 uas-tag 8 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009570] sd 1:0:0:0: [sdb] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 7e 60 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009582] sd 1:0:0:0: [sdb] tag#5 uas_eh_abort_handler 0 uas-tag 7 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009591] sd 1:0:0:0: [sdb] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 7d 00 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009603] sd 1:0:0:0: [sdb] tag#14 uas_eh_abort_handler 0 uas-tag 6 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009612] sd 1:0:0:0: [sdb] tag#14 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 7a e0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009624] sd 1:0:0:0: [sdb] tag#4 uas_eh_abort_handler 0 uas-tag 30 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009633] sd 1:0:0:0: [sdb] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 75 00 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009645] sd 1:0:0:0: [sdb] tag#3 uas_eh_abort_handler 0 uas-tag 5 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009654] sd 1:0:0:0: [sdb] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 00 26 74 80 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009666] sd 1:0:0:0: [sdb] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009674] sd 1:0:0:0: [sdb] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 a6 40 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009734] sd 1:0:0:0: [sdb] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009756] sd 1:0:0:0: [sdb] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 9f 20 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009777] sd 1:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009794] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 9e a0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009806] sd 1:0:0:0: [sdb] tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009815] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 9a c0 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009827] sd 1:0:0:0: [sdb] tag#28 uas_eh_abort_handler 0 uas-tag 29 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009840] sd 1:0:0:0: [sdb] tag#28 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 92 00 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.009853] sd 1:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 28 inflight: 
Aug 13 23:49:42 hermes75 kernel: [  295.009862] sd 1:0:0:0: [sdb] tag#27 CDB: opcode=0x8a 8a 00 00 00 00 00 00 06 90 20 00 00 00 20 00 00
Aug 13 23:49:42 hermes75 kernel: [  295.010276] scsi host1: uas_eh_bus_reset_handler start
Aug 13 23:49:42 hermes75 kernel: [  295.010334] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  295.016312] xhci-hcd xhci-hcd.9.auto: @00000000f2fe94a0 00000000 00000000 1b000000 04058001
Aug 13 23:49:42 hermes75 kernel: [  295.022243] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:42 hermes75 kernel: [  295.028209] xhci-hcd xhci-hcd.9.auto: @00000000f2fe94c0 00000000 00000000 1b000000 04058001
Aug 13 23:49:42 hermes75 kernel: [  295.034120] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:43 hermes75 kernel: [  295.040069] xhci-hcd xhci-hcd.9.auto: @00000000f2fe94e0 00000000 00000000 1b000000 04058001
Aug 13 23:49:43 hermes75 kernel: [  295.045924] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:43 hermes75 kernel: [  295.051880] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9500 00000000 00000000 1b000000 04058001
Aug 13 23:49:43 hermes75 kernel: [  295.057768] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:43 hermes75 kernel: [  295.063719] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9520 00000000 00000000 1b000000 04058001
Aug 13 23:49:43 hermes75 kernel: [  295.069585] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:43 hermes75 kernel: [  295.075536] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9540 00000000 00000000 1b000000 04058001
Aug 13 23:49:43 hermes75 kernel: [  295.081416] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:43 hermes75 kernel: [  295.087373] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9560 00000000 00000000 1b000000 04058001
Aug 13 23:49:43 hermes75 kernel: [  295.093259] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:43 hermes75 kernel: [  295.099216] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9580 00000000 00000000 1b000000 04058001
Aug 13 23:49:43 hermes75 kernel: [  295.105099] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:49:43 hermes75 kernel: [  295.111057] xhci-hcd xhci-hcd.9.auto: @00000000f2fe95a0 00000000 00000000 1b000000 04058001
Aug 13 23:49:43 hermes75 kernel: [  295.180830] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd
Aug 13 23:49:43 hermes75 kernel: [  295.193384] scsi host1: uas_eh_bus_reset_handler success
Aug 13 23:50:13 hermes75 kernel: [  325.824531] sd 1:0:0:0: [sdb] tag#23 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.824572] sd 1:0:0:0: [sdb] tag#23 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a6 80 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.824656] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.841736] xhci-hcd xhci-hcd.9.auto: @00000000f2fe92b0 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.858925] sd 1:0:0:0: [sdb] tag#22 uas_eh_abort_handler 0 uas-tag 20 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.858965] sd 1:0:0:0: [sdb] tag#22 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a6 00 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.859047] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.876126] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9310 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.893363] sd 1:0:0:0: [sdb] tag#21 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.893401] sd 1:0:0:0: [sdb] tag#21 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a5 00 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.893526] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.900969] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9370 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.908421] sd 1:0:0:0: [sdb] tag#20 uas_eh_abort_handler 0 uas-tag 19 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.908441] sd 1:0:0:0: [sdb] tag#20 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a3 00 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.908531] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.915959] xhci-hcd xhci-hcd.9.auto: @00000000f2fe93d0 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.923395] sd 1:0:0:0: [sdb] tag#19 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.923415] sd 1:0:0:0: [sdb] tag#19 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a2 20 00 00 00 40 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.923491] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.929876] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9420 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.936298] sd 1:0:0:0: [sdb] tag#18 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.936315] sd 1:0:0:0: [sdb] tag#18 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a1 e0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.936367] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.942753] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9470 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.949140] sd 1:0:0:0: [sdb] tag#17 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.949160] sd 1:0:0:0: [sdb] tag#17 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a1 20 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.949239] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.955208] xhci-hcd xhci-hcd.9.auto: @00000000f2fe94c0 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.961161] sd 1:0:0:0: [sdb] tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.961179] sd 1:0:0:0: [sdb] tag#16 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a0 e0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.961245] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.967215] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9530 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.973178] sd 1:0:0:0: [sdb] tag#15 uas_eh_abort_handler 0 uas-tag 16 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.973195] sd 1:0:0:0: [sdb] tag#15 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a a0 a0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.973255] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.979213] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9580 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.985154] sd 1:0:0:0: [sdb] tag#14 uas_eh_abort_handler 0 uas-tag 15 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.985170] sd 1:0:0:0: [sdb] tag#14 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a 9f e0 00 00 00 40 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.985325] sd 1:0:0:0: [sdb] tag#13 uas_eh_abort_handler 0 uas-tag 14 inflight: CMD OUT 
Aug 13 23:50:13 hermes75 kernel: [  325.985339] sd 1:0:0:0: [sdb] tag#13 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a ac 00 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.985404] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  325.991367] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9620 00000000 00000000 1b000000 04088001
Aug 13 23:50:13 hermes75 kernel: [  325.997330] sd 1:0:0:0: [sdb] tag#12 uas_eh_abort_handler 0 uas-tag 13 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997347] sd 1:0:0:0: [sdb] tag#12 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a ab a0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997362] sd 1:0:0:0: [sdb] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997371] sd 1:0:0:0: [sdb] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a aa 60 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997386] sd 1:0:0:0: [sdb] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997394] sd 1:0:0:0: [sdb] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a8 80 00 00 00 40 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997406] sd 1:0:0:0: [sdb] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997419] sd 1:0:0:0: [sdb] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a7 c0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997431] sd 1:0:0:0: [sdb] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997440] sd 1:0:0:0: [sdb] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a7 40 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997486] sd 1:0:0:0: [sdb] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997498] sd 1:0:0:0: [sdb] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a6 80 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997516] sd 1:0:0:0: [sdb] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997525] sd 1:0:0:0: [sdb] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a6 00 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997537] sd 1:0:0:0: [sdb] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997546] sd 1:0:0:0: [sdb] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a5 00 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997558] sd 1:0:0:0: [sdb] tag#4 uas_eh_abort_handler 0 uas-tag 30 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997567] sd 1:0:0:0: [sdb] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a3 00 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997579] sd 1:0:0:0: [sdb] tag#3 uas_eh_abort_handler 0 uas-tag 29 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997588] sd 1:0:0:0: [sdb] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a2 20 00 00 00 40 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997600] sd 1:0:0:0: [sdb] tag#2 uas_eh_abort_handler 0 uas-tag 28 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997608] sd 1:0:0:0: [sdb] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a1 e0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997620] sd 1:0:0:0: [sdb] tag#1 uas_eh_abort_handler 0 uas-tag 27 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997628] sd 1:0:0:0: [sdb] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a1 20 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997641] sd 1:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 26 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997650] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a0 e0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997662] sd 1:0:0:0: [sdb] tag#29 uas_eh_abort_handler 0 uas-tag 25 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997670] sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a a0 a0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997683] sd 1:0:0:0: [sdb] tag#28 uas_eh_abort_handler 0 uas-tag 24 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997691] sd 1:0:0:0: [sdb] tag#28 CDB: opcode=0x8a 8a 00 00 00 00 00 00 0a 9f e0 00 00 00 40 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997703] sd 1:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 23 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997712] sd 1:0:0:0: [sdb] tag#27 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a 9f 80 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997724] sd 1:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 22 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997733] sd 1:0:0:0: [sdb] tag#26 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a 9f 20 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997745] sd 1:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 21 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997754] sd 1:0:0:0: [sdb] tag#25 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a 9e 80 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997766] sd 1:0:0:0: [sdb] tag#24 uas_eh_abort_handler 0 uas-tag 5 inflight: 
Aug 13 23:50:13 hermes75 kernel: [  325.997774] sd 1:0:0:0: [sdb] tag#24 CDB: opcode=0x8a 8a 00 00 00 00 00 00 2a 9d c0 00 00 00 20 00 00
Aug 13 23:50:13 hermes75 kernel: [  325.997840] scsi host1: uas_eh_bus_reset_handler start
Aug 13 23:50:13 hermes75 kernel: [  325.997891] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  326.003864] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9670 00000000 00000000 1b000000 04058001
Aug 13 23:50:13 hermes75 kernel: [  326.009774] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  326.015742] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9690 00000000 00000000 1b000000 04058001
Aug 13 23:50:13 hermes75 kernel: [  326.021646] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:13 hermes75 kernel: [  326.027595] xhci-hcd xhci-hcd.9.auto: @00000000f2fe96b0 00000000 00000000 1b000000 04058001
Aug 13 23:50:13 hermes75 kernel: [  326.033445] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.039401] xhci-hcd xhci-hcd.9.auto: @00000000f2fe96d0 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.045291] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.051235] xhci-hcd xhci-hcd.9.auto: @00000000f2fe96f0 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.057110] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.063064] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9710 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.068944] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.074894] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9730 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.080758] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.086707] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9750 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.092563] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.098510] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9770 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.104375] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.110322] xhci-hcd xhci-hcd.9.auto: @00000000f2fe9790 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.116192] xhci-hcd xhci-hcd.9.auto: ERROR Transfer event for disabled endpoint or incorrect stream ring
Aug 13 23:50:14 hermes75 kernel: [  326.122136] xhci-hcd xhci-hcd.9.auto: @00000000f2fe97b0 00000000 00000000 1b000000 04058001
Aug 13 23:50:14 hermes75 kernel: [  326.191934] usb 5-1.4: reset SuperSpeed USB device number 4 using xhci-hcd
Aug 13 23:50:14 hermes75 kernel: [  326.205026] scsi host1: uas_eh_bus_reset_handler success
Aug 13 23:51:01 hermes75 kernel: [    0.000000] Booting Linux on physical CPU 0x0

Aug 14 00:36:38 hermes75 kernel: [ 2670.993794] Unable to handle kernel paging request at virtual address ffffffc12a9a02c3
Aug 14 00:36:38 hermes75 kernel: [ 2670.994685] pgd = ffffffc0e578f000
Aug 14 00:36:38 hermes75 kernel: [ 2670.995063] [ffffffc12a9a02c3] *pgd=0000000000000000, *pud=0000000000000000
Aug 14 00:36:38 hermes75 kernel: [ 2670.995899] Internal error: Oops: 96000005 [#1] SMP
Aug 14 00:36:38 hermes75 kernel: [ 2670.996424] Modules linked in: zram lz4_compress autofs4 uas usb_storage dw_hdmi_i2s_audio mali
Aug 14 00:36:38 hermes75 kernel: [ 2670.997415] CPU: 2 PID: 1940 Comm: fbackup write Not tainted 4.4.132-1075-rockchip-ayufan-ga83beded8524 #1
Aug 14 00:36:38 hermes75 kernel: [ 2670.998448] Hardware name: Pine64 Rock64 (DT)
Aug 14 00:36:38 hermes75 kernel: [ 2670.998924] task: ffffffc0e3ccf000 task.stack: ffffffc0e904c000
Aug 14 00:36:38 hermes75 kernel: [ 2670.999561] PC is at link_path_walk+0x158/0x488
Aug 14 00:36:38 hermes75 kernel: [ 2671.000051] LR is at link_path_walk+0x244/0x488
Aug 14 00:36:38 hermes75 kernel: [ 2671.000541] pc : [<ffffff80081f0e38>] lr : [<ffffff80081f0f24>] pstate: a0000145
Aug 14 00:36:38 hermes75 kernel: [ 2671.001321] sp : ffffffc0e904fbd0
Aug 14 00:36:38 hermes75 kernel: [ 2671.001676] x29: ffffffc0e904fbd0 x28: ffffffc0e3ccf000 
Aug 14 00:36:38 hermes75 kernel: [ 2671.002260] x27: ffffffc06c22a01c x26: 0000000000000038 
Aug 14 00:36:38 hermes75 kernel: [ 2671.002838] x25: 61c8864680b583eb x24: d0d0d0d0d0d0d0d0 
Aug 14 00:36:38 hermes75 kernel: [ 2671.003413] x23: 2f2f2f2f2f2f2f2f x22: fefefefefefefeff 
Aug 14 00:36:38 hermes75 kernel: [ 2671.003989] x21: ffffffc12a9a02c3 x20: 0000000000000000 
Aug 14 00:36:38 hermes75 kernel: [ 2671.004564] x19: ffffffc0e904fd50 x18: 0000007f0c0207b8 
Aug 14 00:36:38 hermes75 kernel: [ 2671.005135] x17: 0000007f9c9ce478 x16: ffffff80081e3a2c 
Aug 14 00:36:38 hermes75 kernel: [ 2671.005707] x15: 0000070c519d8a34 x14: 612f66352f623336 
Aug 14 00:36:38 hermes75 kernel: [ 2671.006284] x13: 3866326237646239 x12: 362d383039382d37 
Aug 14 00:36:38 hermes75 kernel: [ 2671.006858] x11: 6335342d38656166 x10: 2d37666135323863 
Aug 14 00:36:38 hermes75 kernel: [ 2671.007430] x9 : 0000000000000000 x8 : ffffffc0943588b8 
Aug 14 00:36:38 hermes75 kernel: [ 2671.008001] x7 : 0000000000000000 x6 : 000000000000003f 
Aug 14 00:36:38 hermes75 kernel: [ 2671.008574] x5 : ffffffc0e604ee90 x4 : 0000000000000000 
Aug 14 00:36:38 hermes75 kernel: [ 2671.009146] x3 : 0000000000000008 x2 : 00000000002000c8 
Aug 14 00:36:38 hermes75 kernel: [ 2671.009719] x1 : be776276be776276 x0 : ffffffc0e604ee58 
Aug 14 00:36:38 hermes75 kernel: [ 2671.010292] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.010292] PC: 0xffffff80081f0db8:
Aug 14 00:36:38 hermes75 kernel: [ 2671.010816] 0db8  d1000401 8a200020 d28007e1 d347fc00 8a000042 f100001f 8b030042 dac01003
Aug 14 00:36:38 hermes75 kernel: [ 2671.011745] 0dd8  cb030021 394002a0 1a8107e1 9b197c42 7100b81f 13037c21 8b21c081 93c28021
Aug 14 00:36:38 hermes75 kernel: [ 2671.012664] 0df8  54000aa1 d360fc20 7100041f 54000c40 7100081f 54000a01 394006a0 7100b81f
Aug 14 00:36:38 hermes75 kernel: [ 2671.013585] 0e18  540009a1 b9403a60 52800074 32140000 b9003a60 a9015661 8b4182b5 b9004674
Aug 14 00:36:38 hermes75 kernel: [ 2671.014505] 0e38  394002a0 340000a0 38401ea0 7100bc1f 54ffffc0 35000a40 b9404a60 340004e0
Aug 14 00:36:38 hermes75 kernel: [ 2671.015427] 0e58  f9402a61 51000400 52800602 9ba20400 f9400c15 b4000435 52800061 aa1303e0
Aug 14 00:36:38 hermes75 kernel: [ 2671.016349] 0e78  97fffefa 2a0003f4 7100001f 5400038b 54001340 b9404a7a 52800601 928005e0
Aug 14 00:36:38 hermes75 kernel: [ 2671.017270] 0e98  9ba10340 f9402a7a 8b00035a b9403a60 f940075c f940135b 37300760 aa1a03e0
Aug 14 00:36:38 hermes75 kernel: [ 2671.018194] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.018194] LR: 0xffffff80081f0ea4:
Aug 14 00:36:38 hermes75 kernel: [ 2671.018719] 0ea4  b9403a60 f940075c f940135b 37300760 aa1a03e0 94003679 942889cc b9403a62
Aug 14 00:36:38 hermes75 kernel: [ 2671.019640] 0ec4  aa1b03e1 aa1c03e0 d3461842 940b6312 34000820 93407c14 b140069f 54000e49
Aug 14 00:36:38 hermes75 kernel: [ 2671.020561] 0ee4  14000004 910006b5 17ffff88 52800014 2a1403e0 a94153f3 a9425bf5 a94363f7
Aug 14 00:36:38 hermes75 kernel: [ 2671.021483] 0f04  a9446bf9 a94573fb a8c77bfd d65f03c0 f9400260 52801022 f9401a61 97fff69f
Aug 14 00:36:38 hermes75 kernel: [ 2671.022403] 0f24  2a0003f4 3100281f 54fff221 52800002 d2800001 aa1303e0 97fffc68 34fff0e0
Aug 14 00:36:38 hermes75 kernel: [ 2671.023325] 0f44  12800134 17ffffeb b9403a62 f9400660 12137842 b9003a62 b9400002 3607f662
Aug 14 00:36:38 hermes75 kernel: [ 2671.028078] 0f64  a90657a1 f9403c01 f9400822 910183a1 d63f0040 36f80060 2a0003f4 17ffffdd
Aug 14 00:36:38 hermes75 kernel: [ 2671.032887] 0f84  a94657a1 17ffffa9 52800054 17ffffa7 52800021 17ffffb7 aa1b03e1 aa1a03e0
Aug 14 00:36:38 hermes75 kernel: [ 2671.037745] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.037745] SP: 0xffffffc0e904fb50:
Aug 14 00:36:38 hermes75 kernel: [ 2671.046038] fb50  fefefeff fefefefe 2f2f2f2f 2f2f2f2f d0d0d0d0 d0d0d0d0 80b583eb 61c88646
Aug 14 00:36:38 hermes75 kernel: [ 2671.050803] fb70  00000038 00000000 6c22a01c ffffffc0 e3ccf000 ffffffc0 e904fbd0 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.055577] fb90  081f0f24 ffffff80 e904fbd0 ffffffc0 081f0e38 ffffff80 a0000145 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.060302] fbb0  e904fd50 ffffffc0 00000000 00000000 00000000 00000080 e604ee58 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.064984] fbd0  e904fc40 ffffffc0 081f2330 ffffff80 e904fd50 ffffffc0 94358780 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.069598] fbf0  ffffff9c 00000000 6c22a000 ffffffc0 e904fe7c ffffffc0 00000015 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.074169] fc10  0000011d 00000000 00000038 00000000 6c22a01c ffffffc0 e3ccf000 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.078758] fc30  e904fe7c ffffffc0 081f2d90 ffffff80 e904fd10 ffffffc0 081f3aa0 ffffff80
Aug 14 00:36:38 hermes75 kernel: [ 2671.083421] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.083421] X0: 0xffffffc0e604edd8:
Aug 14 00:36:38 hermes75 kernel: [ 2671.091364] edd8  00190019 dead4ead ffffffff d5d5474c ffffffff ffffffff 00000000 5475df55
Aug 14 00:36:38 hermes75 kernel: [ 2671.096063] edf8  08c9aa80 ffffff80 f479a800 ffffffc0 fc551555 d5d51544 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.100804] ee18  914e4c68 ffffffc0 e39bf320 ffffffc0 e604e330 ffffffc0 914e4330 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.105557] ee38  e604ee38 ffffffc0 e604ee38 ffffffc0 00000000 00000000 92962148 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.110318] ee58  002000c8 00000004 f43f0368 ffffffc0 fa32dd70 ffffffc0 e605e0d8 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.115115] ee78  e5c4c2ac 0000000b e604ee90 ffffffc0 e6256ee8 ffffffc0 38303831 322d3331
Aug 14 00:36:38 hermes75 kernel: [ 2671.119909] ee98  00363533 f300444d 4414d51b 55551545 d55555b5 00d5f641 00160016 dead4ead
Aug 14 00:36:38 hermes75 kernel: [ 2671.124750] eeb8  ffffffff 5d51f455 ffffffff ffffffff 00000003 55d550dd 08c9aa80 ffffff80
Aug 14 00:36:38 hermes75 kernel: [ 2671.129657] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.129657] X5: 0xffffffc0e604ee10:
Aug 14 00:36:38 hermes75 kernel: [ 2671.138227] ee10  00000000 00000000 914e4c68 ffffffc0 e39bf320 ffffffc0 e604e330 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.143209] ee30  914e4330 ffffffc0 e604ee38 ffffffc0 e604ee38 ffffffc0 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.148230] ee50  92962148 ffffffc0 002000c8 00000004 f43f0368 ffffffc0 fa32dd70 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.153299] ee70  e605e0d8 ffffffc0 e5c4c2ac 0000000b e604ee90 ffffffc0 e6256ee8 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.158403] ee90  38303831 322d3331 00363533 f300444d 4414d51b 55551545 d55555b5 00d5f641
Aug 14 00:36:38 hermes75 kernel: [ 2671.163542] eeb0  00160016 dead4ead ffffffff 5d51f455 ffffffff ffffffff 00000003 55d550dd
Aug 14 00:36:38 hermes75 kernel: [ 2671.168727] eed0  08c9aa80 ffffff80 f479a800 ffffffc0 d46d1555 d74d54c6 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.173957] eef0  e604eef0 ffffffc0 e604eef0 ffffffc0 e605e190 ffffffc0 e605e190 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.179138] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.179138] X8: 0xffffffc094358838:
Aug 14 00:36:38 hermes75 kernel: [ 2671.188142] 8838  00000000 00000000 00000000 00000000 00000000 00000000 f49ec540 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.193309] 8858  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.198419] 8878  00000000 00000000 00000000 00000000 00000000 00000000 94358890 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.203455] 8898  94358890 ffffffc0 943588a0 ffffffc0 943588a0 ffffffc0 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.208507] 88b8  46464646 46464646 943592c0 ffffffc0 081e5f0c ffffff80 f4a9ce00 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.213545] 88d8  cd99191b bc6c0dcd 78a848d5 b1d4f708 6423fa18 7ea3f52b a4695e86 89727bad
Aug 14 00:36:38 hermes75 kernel: [ 2671.218595] 88f8  ffffffff 00000000 ffffffff ffffffff 00000000 00000000 00060000 0002801d
Aug 14 00:36:38 hermes75 kernel: [ 2671.223702] 8918  f4a9ce00 ffffffc0 0842f888 ffffff80 00000000 00000000 f5428c00 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.228775] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.228775] X16: 0xffffff80081e39ac:
Aug 14 00:36:38 hermes75 kernel: [ 2671.237532] 39ac  2a1503e2 aa1703e0 9400fcb0 aa1703e2 52800005 d2800004 52800023 2a1503e1
Aug 14 00:36:38 hermes75 kernel: [ 2671.242545] 39cc  aa1803e0 9400fb7b aa1403e1 2a1603e0 94007243 17ffffcf a9bd7bfd 910003fd
Aug 14 00:36:38 hermes75 kernel: [ 2671.247546] 39ec  a90153f3 f90013f5 aa0103f4 aa0203f5 aa0003f3 aa1e03e0 d503201f 2a1503e3
Aug 14 00:36:38 hermes75 kernel: [ 2671.252537] 3a0c  320f0282 aa1303e1 12800c60 97ffff65 f94013f5 a94153f3 a8c37bfd d65f03c0
Aug 14 00:36:38 hermes75 kernel: [ 2671.257535] 3a2c  a9bd7bfd 910003fd a90153f3 a9025bf5 aa0003f3 aa0103f4 aa1e03e0 aa0203f5
Aug 14 00:36:38 hermes75 kernel: [ 2671.262526] 3a4c  aa0303f6 d503201f 2a1603e3 320f02a2 aa1403e1 2a1303e0 97ffff52 a94153f3
Aug 14 00:36:38 hermes75 kernel: [ 2671.267495] 3a6c  a9425bf5 a8c37bfd d65f03c0 a9be7bfd 910003fd a90153f3 aa0103f4 aa0003f3
Aug 14 00:36:38 hermes75 kernel: [ 2671.272522] 3a8c  aa1e03e0 d503201f 2a1403e2 52804821 aa1303e0 97ffffd1 a94153f3 a8c27bfd
Aug 14 00:36:38 hermes75 kernel: [ 2671.277536] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.277536] X19: 0xffffffc0e904fcd0:
Aug 14 00:36:38 hermes75 kernel: [ 2671.286225] fcd0  92ff8db8 00000026 6c22a09b ffffffc0 00000000 ffffffc0 081f3a90 ffffff80
Aug 14 00:36:38 hermes75 kernel: [ 2671.291228] fcf0  e904fe7c ffffffc0 00000001 00000000 ffffff9c 00000000 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.296262] fd10  e904fe20 ffffffc0 081e3904 ffffff80 6c22a000 ffffffc0 ffffff9c 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.301298] fd30  000a0042 00000000 00000052 00000000 e904fdb0 ffffffc0 082000dc ffffff80
Aug 14 00:36:38 hermes75 kernel: [ 2671.306336] fd50  f09fe720 ffffffc0 e604ee58 ffffffc0 be776276 be776276 6c22a04d ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.311391] fd70  f092a020 ffffffc0 e28ed438 ffffffc0 e6256ee8 ffffffc0 00000051 00000004
Aug 14 00:36:38 hermes75 kernel: [ 2671.316411] fd90  00000b62 00000000 00000000 00000000 e904fda8 ffffffc0 082000c0 ffffff80
Aug 14 00:36:38 hermes75 kernel: [ 2671.321468] fdb0  e904fe00 ffffffc0 08200224 ffffff80 000a0042 00000000 ffffff9c 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.326522] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.326522] X21: 0xffffffc12a9a0243:
Aug 14 00:36:38 hermes75 kernel: [ 2671.335300] 0240  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.340374] 0260  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.345378] 0280  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.350311] 02a0  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.355149] 02c0  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.359898] 02e0  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.364555] 0300  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.369186] 0320  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.373704] 0340  ******** ******** ******** ******** ******** ******** ******** ********
Aug 14 00:36:38 hermes75 kernel: [ 2671.378162] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.378162] X27: 0xffffffc06c229f9c:
Aug 14 00:36:38 hermes75 kernel: [ 2671.385810] 9f9c  00000000 c0a55bc0 ffffffbd 00001000 00000000 c07e8100 ffffffbd 00001000
Aug 14 00:36:38 hermes75 kernel: [ 2671.390288] 9fbc  00000000 c0717480 ffffffbd 00001000 00000000 c150f740 ffffffbd 00001000
Aug 14 00:36:38 hermes75 kernel: [ 2671.394689] 9fdc  00000000 c29f5bc0 ffffffbd 00001000 00000000 c37fdcc0 ffffffbd 00001000
Aug 14 00:36:38 hermes75 kernel: [ 2671.399030] 9ffc  00000000 6c22a01c ffffffc0 0c08da70 0000007f 00000000 00000000 00000001
Aug 14 00:36:38 hermes75 kernel: [ 2671.403351] a01c  64656d2f 752f6169 63616272 2f70756b 6d726568 35377365 7265685b 3773656d
Aug 14 00:36:38 hermes75 kernel: [ 2671.407673] a03c  5d625f35 3038312f 2d333138 36353332 61682e2f 73656873 6165732f 656c6966
Aug 14 00:36:38 hermes75 kernel: [ 2671.412065] a05c  7461642d 2f305f61 726f7473 2f656761 636f6c62 642f736b 35323863 2d376661
Aug 14 00:36:38 hermes75 kernel: [ 2671.416444] a07c  38656166 6335342d 39382d37 362d3830 37646239 38663262 2f623336 612f6635
Aug 14 00:36:38 hermes75 kernel: [ 2671.420890] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.420890] X28: 0xffffffc0e3ccef80:
Aug 14 00:36:38 hermes75 kernel: [ 2671.428587] ef80  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.433097] efa0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.437509] efc0  00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.441826] efe0  00000000 00000000 00000000 00000000 1c454f55 56957d5e d555dd55 4dd57c55
Aug 14 00:36:38 hermes75 kernel: [ 2671.446134] f000  00000002 00000000 ffffffff ffffffff 00000000 00000000 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.450418] f020  e904c000 ffffffc0 00000002 00400040 00000000 00000000 00000000 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.454732] f040  00000001 00000002 0000004a 00000000 00242afb 00000001 f0a12a00 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.458996] f060  00000002 00000001 00000078 00000078 00000078 00000000 08c3e4c8 ffffff80
Aug 14 00:36:38 hermes75 kernel: [ 2671.463208] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.463208] X29: 0xffffffc0e904fb50:
Aug 14 00:36:38 hermes75 kernel: [ 2671.470317] fb50  fefefeff fefefefe 2f2f2f2f 2f2f2f2f d0d0d0d0 d0d0d0d0 80b583eb 61c88646
Aug 14 00:36:38 hermes75 kernel: [ 2671.474514] fb70  00000038 00000000 6c22a01c ffffffc0 e3ccf000 ffffffc0 e904fbd0 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.478723] fb90  081f0f24 ffffff80 e904fbd0 ffffffc0 081f0e38 ffffff80 a0000145 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.482923] fbb0  e904fd50 ffffffc0 00000000 00000000 00000000 00000080 e604ee58 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.487109] fbd0  e904fc40 ffffffc0 081f2330 ffffff80 e904fd50 ffffffc0 94358780 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.491247] fbf0  ffffff9c 00000000 6c22a000 ffffffc0 e904fe7c ffffffc0 00000015 00000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.495425] fc10  0000011d 00000000 00000038 00000000 6c22a01c ffffffc0 e3ccf000 ffffffc0
Aug 14 00:36:38 hermes75 kernel: [ 2671.499574] fc30  e904fe7c ffffffc0 081f2d90 ffffff80 e904fd10 ffffffc0 081f3aa0 ffffff80
Aug 14 00:36:38 hermes75 kernel: [ 2671.503698] 
Aug 14 00:36:38 hermes75 kernel: [ 2671.507109] Process fbackup write (pid: 1940, stack limit = 0xffffffc0e904c000)
Aug 14 00:36:38 hermes75 kernel: [ 2671.511137] Stack: (0xffffffc0e904fbd0 to 0xffffffc0e9050000)
Aug 14 00:36:38 hermes75 kernel: [ 2671.515014] fbc0:                                   ffffffc0e904fc40 ffffff80081f2330
Aug 14 00:36:38 hermes75 kernel: [ 2671.519145] fbe0: ffffffc0e904fd50 ffffffc094358780 00000000ffffff9c ffffffc06c22a000
Aug 14 00:36:38 hermes75 kernel: [ 2671.523285] fc00: ffffffc0e904fe7c 0000000000000015 000000000000011d 0000000000000038
Aug 14 00:36:38 hermes75 kernel: [ 2671.527403] fc20: ffffffc06c22a01c ffffffc0e3ccf000 ffffffc0e904fe7c ffffff80081f2d90
Aug 14 00:36:38 hermes75 kernel: [ 2671.531493] fc40: ffffffc0e904fd10 ffffff80081f3aa0 ffffffc0e904fe7c 0000000000000001
Aug 14 00:36:38 hermes75 kernel: [ 2671.535602] fc60: 00000000ffffff9c ffffffc06c22a000 0000000080000000 0000000000000015
Aug 14 00:36:38 hermes75 kernel: [ 2671.539667] fc80: 000000000000011d 0000000000000038 ffffff8008c32000 ffffffc0e3ccf000
Aug 14 00:36:38 hermes75 kernel: [ 2671.543810] fca0: ffffffc0e904fe10 0000007f0c08da70 0000000000000041 ffffff8008119fd4
Aug 14 00:36:38 hermes75 kernel: [ 2671.548024] fcc0: ffffffc0f09fe720 ffffffc0970e1af8 0000002692ff8db8 ffffffc06c22a09b
Aug 14 00:36:38 hermes75 kernel: [ 2671.552300] fce0: ffffffc000000000 ffffff80081f3a90 ffffffc0e904fe7c 0000000000000001
Aug 14 00:36:38 hermes75 kernel: [ 2671.556653] fd00: 00000000ffffff9c 0000000000000000 ffffffc0e904fe20 ffffff80081e3904
Aug 14 00:36:38 hermes75 kernel: [ 2671.561075] fd20: ffffffc06c22a000 00000000ffffff9c 00000000000a0042 0000000000000052
Aug 14 00:36:38 hermes75 kernel: [ 2671.565572] fd40: ffffffc0e904fdb0 ffffff80082000dc ffffffc0f09fe720 ffffffc0e604ee58
Aug 14 00:36:38 hermes75 kernel: [ 2671.570143] fd60: be776276be776276 ffffffc06c22a04d ffffffc0f092a020 ffffffc0e28ed438
Aug 14 00:36:38 hermes75 kernel: [ 2671.574767] fd80: ffffffc0e6256ee8 0000000400000051 0000000000000b62 0000000000000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.579379] fda0: ffffffc0e904fda8 ffffff80082000c0 ffffffc0e904fe00 ffffff8008200224
Aug 14 00:36:38 hermes75 kernel: [ 2671.584041] fdc0: 00000000000a0042 00000000ffffff9c 00000000000a0042 0000007f0c08da70
Aug 14 00:36:38 hermes75 kernel: [ 2671.588687] fde0: 0000000080000000 0000000000000015 000000000000011d 0000000000000038
Aug 14 00:36:38 hermes75 kernel: [ 2671.593351] fe00: ffffffc0e904fe20 ffffffc06c22a000 0000000000000000 ffffff9c00000002
Aug 14 00:36:38 hermes75 kernel: [ 2671.598066] fe20: ffffffc0e904fe90 ffffff80081e3a68 ffffffffffffff9c 0000007f0c08da70
Aug 14 00:36:38 hermes75 kernel: [ 2671.602793] fe40: 0000000000080042 00000000000001f8 0000000080000000 0000000000000015
Aug 14 00:36:38 hermes75 kernel: [ 2671.607496] fe60: ffffffc0f09fe720 ffffffc03ffbf438 0000000514496ef2 000200426c22a065
Aug 14 00:36:38 hermes75 kernel: [ 2671.612173] fe80: 0000002692ff81f8 0000000100000300 0000000000000000 ffffff8008082f30
Aug 14 00:36:38 hermes75 kernel: [ 2671.616845] fea0: 0000000000000000 00000040f5de3000 ffffffffffffffff 0000007f9c9ce568
Aug 14 00:36:38 hermes75 kernel: [ 2671.621505] fec0: ffffffffffffff9c 0000007f0c08da70 0000000000080042 00000000000001f8
Aug 14 00:36:38 hermes75 kernel: [ 2671.626133] fee0: 0000000000000000 0000007f57fff1c0 0000007f57fff8b0 0000000000000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.630793] ff00: 0000000000000038 642f736b636f6c62 2d37666135323863 6335342d38656166
Aug 14 00:36:38 hermes75 kernel: [ 2671.635421] ff20: 362d383039382d37 3866326237646239 612f66352f623336 0000070c519d8a34
Aug 14 00:36:38 hermes75 kernel: [ 2671.640136] ff40: 000000000094a180 0000007f9c9ce478 0000007f0c0207b8 0000000000080042
Aug 14 00:36:38 hermes75 kernel: [ 2671.644941] ff60: 0000007f0c08da70 0000000000949000 00000000fffffffe 0000000000000042
Aug 14 00:36:38 hermes75 kernel: [ 2671.649741] ff80: 0000007f57ffdab8 0000007f1c057bc8 0000007f57ffe808 0000000000000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.654505] ffa0: 00000000004539f8 0000007f57ffd970 0000007f9c9ce54c 0000007f57ffd970
Aug 14 00:36:38 hermes75 kernel: [ 2671.659274] ffc0: 0000007f9c9ce568 0000000080000000 ffffffffffffff9c 0000000000000038
Aug 14 00:36:38 hermes75 kernel: [ 2671.664045] ffe0: 0000000000000000 0000000000000000 ffffffbdc292d800 ffffffbdc292aac0
Aug 14 00:36:38 hermes75 kernel: [ 2671.668835] Call trace:
Aug 14 00:36:38 hermes75 kernel: [ 2671.673068] Exception stack(0xffffffc0e904fa00 to 0xffffffc0e904fb30)
Aug 14 00:36:38 hermes75 kernel: [ 2671.677766] fa00: ffffffc0e904fd50 0000008000000000 ffffffc0e904fbd0 ffffff80081f0e38
Aug 14 00:36:38 hermes75 kernel: [ 2671.682579] fa20: ffffffc0e904fa40 ffffff800845a8f0 ffffffc0e475d600 ffffffc0e8b94578
Aug 14 00:36:38 hermes75 kernel: [ 2671.687351] fa40: ffffffc0e904fa70 ffffff800845adac ffffffc0e475d600 ffffffc0e8b94578
Aug 14 00:36:38 hermes75 kernel: [ 2671.692065] fa60: ffffffc0e8b94510 ffffffc0e2bec840 ffffffc0e904fa90 ffffff800841485c
Aug 14 00:36:38 hermes75 kernel: [ 2671.696743] fa80: 0000000000000002 ffffffc0f3584000 ffffffc0e904fac0 ffffff8008c16468
Aug 14 00:36:38 hermes75 kernel: [ 2671.701411] faa0: ffffffc0e604ee58 be776276be776276 00000000002000c8 0000000000000008
Aug 14 00:36:38 hermes75 kernel: [ 2671.706110] fac0: 0000000000000000 ffffffc0e604ee90 000000000000003f 0000000000000000
Aug 14 00:36:38 hermes75 kernel: [ 2671.710786] fae0: ffffffc0943588b8 0000000000000000 2d37666135323863 6335342d38656166
Aug 14 00:36:38 hermes75 kernel: [ 2671.715482] fb00: 362d383039382d37 3866326237646239 612f66352f623336 0000070c519d8a34
Aug 14 00:36:38 hermes75 kernel: [ 2671.720171] fb20: ffffff80081e3a2c 0000007f9c9ce478
Aug 14 00:36:38 hermes75 kernel: [ 2671.724567] [<ffffff80081f0e38>] link_path_walk+0x158/0x488
Aug 14 00:36:38 hermes75 kernel: [ 2671.728995] [<ffffff80081f2330>] path_openat+0xa24/0xd30
Aug 14 00:36:38 hermes75 kernel: [ 2671.733338] [<ffffff80081f3aa0>] do_filp_open+0x48/0x94
Aug 14 00:36:38 hermes75 kernel: [ 2671.737621] [<ffffff80081e3904>] do_sys_open+0x158/0x238
Aug 14 00:36:38 hermes75 kernel: [ 2671.741874] [<ffffff80081e3a68>] SyS_openat+0x3c/0x4c
Aug 14 00:36:38 hermes75 kernel: [ 2671.746068] [<ffffff8008082f30>] el0_svc_naked+0x24/0x28
Aug 14 00:36:38 hermes75 kernel: [ 2671.750281] Code: b9003a60 a9015661 8b4182b5 b9004674 (394002a0) 
Aug 14 00:36:38 hermes75 kernel: [ 2671.766115] ---[ end trace e222756138ba3140 ]---
Aug 14 00:36:38 hermes75 rsyslogd-2007: action 'action 9' suspended, next retry is Tue Aug 14 00:38:08 2018 [v8.16.0 try http://www.rsyslog.com/e/2007

@ayufan: Could you give some advice how to get it work? Or will there be a patch for the legacy kernel in order to provide stable usb3 capabilities? Or would it help to employ a mainline-kernel (e.g. 4.18) as an alternative to get usb3 working properly?

Of course, one could disable uas or limit transfer speed as @h31 mentioned, but one main reason for me to use rock64 was the hoped-for increased usb3 performance.

P.S.: Can confirm the problem still exists with latest pre-release 4.4.138-1094-rockchip-ayufan.

cnxsoft commented 6 years ago

I'm not sure whether it is related, but I also have a USB disconnect issue with a USB 3.0 drive connected to a USB 2.0 board on RockPro64:

[ 4223.165620] usb 5-1: USB disconnect, device number 3 [ 4223.168190] sd 1:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD [ 4223.168222] sd 1:0:0:0: [sda] tag#1 CDB: opcode=0x28 28 00 07 7c 4b 38 00 01 00 00 [ 4223.168368] sd 1:0:0:0: [sda] tag#1 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00 [ 4223.168379] sd 1:0:0:0: [sda] tag#1 CDB: opcode=0x28 28 00 07 7c 4b 38 00 01 00 00 [ 4223.168385] blk_update_request: I/O error, dev sda, sector 125586232 [ 4223.168997] ntfs: (device sda1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 0x77c4338.

mstattma commented 6 years ago

FWIW, I'm experiencing random crashes on Bionic but also AndroidTV with a Wifi dongle (https://www.pine64.org/?product=usb-wifi-802-11bgn-rtl8188eu-for-rock64) connected to the USB 3 port. The system is either freezing or rebooting, I never got hold of any logs. But connecting the dongle to another port seems to make it stable. I'm still testing, but it looks promising so far.

hermes73 commented 6 years ago

Will try another approach. Read an interesting post from tkaiser in openmediavault forum (https://forum.openmediavault.org/index.php/Thread/19871-Which-energy-efficient-ARM-platform-to-choose/?postID=169303#post169303) concerning suitable hardware for deployment of two harddrives with one usb3 port.

I will test a setting with a powered HD622-PCBA Board USB 3.0 to Dual SATA Adapter Card and report here afterwards whether rock64 still crashes during file transfer or not.

In the meanwhile, @ayufan and others: Are there any news concerning the problem, patches or workarounds?

ShapeShifter499 commented 6 years ago

After many days of up time I saw this error, all drives stopped working and USB 3.0 died.

xhci-hcd xhci-hcd.9.auto: Assuming host is dying, halting host.

The full log is here: https://gist.github.com/ShapeShifter499/a136d9a47359f6f3966b9f3484a7a93c

hermes73 commented 6 years ago

@ShapeShifter499 : Did this happen while you used Arch-Linux (cp. https://archlinuxarm.org/forum/viewtopic.php?f=67&t=12826&sid=6d006809bc4c6a4f3d41cfdc513a0f83&start=10#p59066)? If so, then currently there is no linux-distro available for rock64 with a stable usb3 support, isn't it?

vitaliy-kuzmich commented 6 years ago

same, after heavy nextcloud indexing in docker, board stop responding(after ~1 hour), I've noticed that cache usage in ram fill whole 4gb of ram, only 1 gb took real data

berturion commented 6 years ago

I have the same problem. My Rock64 is on Arch ARM mainline kernel. It hangs after browsing a big collection of photos on my nextcloud instance. My rootfs is on a Sandisk Extreme Pro 32Go SDCard, the Mysql database is stored on an external 3.5" drive self powered behind a powered USB 2.0 hub, itself connected to an USB 2.0 port of my Rock64. I also have a 2.5" drive, not self powered, connected to the powered hub that I use to backup data from the big one.

Sometimes, the system hangs just few minutes later after browsing, sometimes immediately. System must be then rebooted.

The system can not run a day, even doing nothing on nextcloud. Some CRON jobs for system and data backups are running during the day but the system hangs at a quite random moment of the day.

I have found no log for that...

EDIT: I know the issue is on the USB 3.0 port and my setup doesn't use it but it might be related as the symptoms look the same.

vitaliy-kuzmich commented 6 years ago

upd: I've tried usb2 port, and issue were the same. After I've disabled APM and HDD spindown, now it is 3 hours stable work, will test more.

upd: nope, it still failing.

ayufan-rock64 / linux-build

USB 3 hangup during file transfer #112