b-rad-NDi / Ubuntu-media-tree-kernel-builder

Slip stream the latest LinuxTV.org media drivers into an installable Ubuntu kernel package
95 stars 9 forks source link

Hauppauge QuadTV can't scan channels #14

Closed leigh-richardson closed 7 years ago

leigh-richardson commented 7 years ago

On 2017-09-21 03:51, Leigh Richardson wrote:

Hi Brad.

I'm running a fresh install of Ubuntu 17.04. The only applications I've installed since are Chrome, Teamview, and Plex Media Server.

I've installed your PPA and run all updates.

here is the output of uname -a

Linux Leigh-HTPC 4.10.0-32201708161632-generic #0+mediatree+hauppauge- Ubuntu SMP Thu Aug 17 00:27:10 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

Whe I open plex, the quadtv appears, but scanning for channels does returns nothing, from an antenna that I regularly use for digital TV.

Can you suggest some troubleshooting steps I can take, I'm tearing my hair out!

On Friday, 22 September 2017 1:12 AM, Brad wrote: Hi Leigh,

I need more information than uname. Please follow the link to my github and file an issue. Include the full output from dmesg as part of the issue.

Cheers,

Brad


Hi Brad,

I have attached the full output of dmesg to this thread. Thanks again for your assistance.

[ 0.000000] Linux version 4.10.0-32201708161632-generic (buildd@lgw01-45) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #0+mediatree+hauppauge-Ubuntu SMP Thu Aug 17 00:27:10 UTC 2017 (Ubuntu 4.10.0-32201708161632.0+mediatree+hauppauge-generic 4.10.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-32201708161632-generic root=UUID=27e064d5-449d-48d2-876f-d77c885e1c07 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x00000000dadeafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dadeb000-0x00000000dc354fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dc355000-0x00000000dc447fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dc448000-0x00000000dc819fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dc81a000-0x00000000dd1e7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dd1e8000-0x00000000dd23ffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000dd240000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f37ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.50 by American Megatrends [ 0.000000] efi: ACPI 2.0=0xdc448000 ACPI=0xdc448000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0xd9b991d8 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X370 Taichi, BIOS P3.20 09/08/2017 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21f380 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000DF000000 mask FFFFFF000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000220000000 aka 8704M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 3568M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000d9b991d8 to 0x00000000d9b99210. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff8cbdc0096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x25a2a000, 0x25a2afff] PGTABLE [ 0.000000] BRK [0x25a2b000, 0x25a2bfff] PGTABLE [ 0.000000] BRK [0x25a2c000, 0x25a2cfff] PGTABLE [ 0.000000] BRK [0x25a2d000, 0x25a2dfff] PGTABLE [ 0.000000] BRK [0x25a2e000, 0x25a2efff] PGTABLE [ 0.000000] BRK [0x25a2f000, 0x25a2ffff] PGTABLE [ 0.000000] BRK [0x25a30000, 0x25a30fff] PGTABLE [ 0.000000] BRK [0x25a31000, 0x25a31fff] PGTABLE [ 0.000000] BRK [0x25a32000, 0x25a32fff] PGTABLE [ 0.000000] BRK [0x25a33000, 0x25a33fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x32df9000-0x356f3fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DC448000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x00000000DC448098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DC44E040 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658) [ 0.000000] ACPI: DSDT 0x00000000DC4481E8 005E57 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x00000000DC817C80 000040 [ 0.000000] ACPI: APIC 0x00000000DC44E158 0000DE (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DC44E238 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DC44E280 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ 0.000000] ACPI: FIDT 0x00000000DC456ED0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000DC456F70 0018B4 (v01 AMD AMD CPU 00000001 AMD 00000001) [ 0.000000] ACPI: CRAT 0x00000000DC458828 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 0.000000] ACPI: CDIT 0x00000000DC4593F8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x00000000DC459428 001721 (v01 AMD AMD AOD 00000001 INTL 20120913) [ 0.000000] ACPI: MCFG 0x00000000DC45AB50 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: AAFT 0x00000000DC45AB90 00032C (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DC45AEC0 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: SSDT 0x00000000DC45AEF8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x00000000DC45AF20 000042 (v01 00000000 00000000) [ 0.000000] ACPI: BGRT 0x00000000DC45AF68 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: IVRS 0x00000000DC45AFA0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x00000000DC45B070 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000DC45B168 001664 (v01 AMD CPMCMN 00000001 INTL 20120913) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f37ffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x21f355000-0x21f37ffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000021f37ffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009cfffff] [ 0.000000] node 0: [mem 0x000000000a000000-0x00000000dadeafff] [ 0.000000] node 0: [mem 0x00000000dc355000-0x00000000dc447fff] [ 0.000000] node 0: [mem 0x00000000dd240000-0x00000000deffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000021f37ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f37ffff] [ 0.000000] On node 0 totalpages: 2079933 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 27 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14055 pages used for memmap [ 0.000000] DMA32 zone: 899486 pages, LIFO batch:31 [ 0.000000] Normal zone: 18382 pages used for memmap [ 0.000000] Normal zone: 1176448 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdadeb000-0xdc354fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc448000-0xdc819fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdc81a000-0xdd1e7fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdd1e8000-0xdd23ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff8cbfdec00000 s107992 r8192 d31272 u262144 [ 0.000000] pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2047405 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-32201708161632-generic root=UUID=27e064d5-449d-48d2-876f-d77c885e1c07 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7960568K/8319732K available (9083K kernel code, 1666K rwdata, 3816K rodata, 2232K init, 2364K bss, 359164K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16 [ 0.000000] NR_IRQS:524544 nr_irqs:1096 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 3199.652 MHz processor [ 0.000019] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.30 BogoMIPS (lpj=12798608) [ 0.000021] pid_max: default: 32768 minimum: 301 [ 0.000029] ACPI: Core revision 20160930 [ 0.007696] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.008982] Security Framework initialized [ 0.008983] Yama: becoming mindful. [ 0.009007] AppArmor: AppArmor initialized [ 0.009248] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.010690] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011361] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011366] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.011603] CPU: Physical Processor ID: 0 [ 0.011604] CPU: Processor Core ID: 0 [ 0.011610] mce: CPU supports 23 MCE banks [ 0.011629] LVT offset 1 assigned for vector 0xf9 [ 0.011752] LVT offset 2 assigned for vector 0xf4 [ 0.011763] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.011764] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.011859] Freeing SMP alternatives memory: 36K [ 0.014673] ftrace: allocating 34182 entries in 134 pages [ 0.027665] smpboot: Max logical packages: 3 [ 0.198038] Switched APIC routing to physical flat. [ 0.198817] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.343106] smpboot: CPU0: AMD Ryzen 5 1600 Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1) [ 0.343145] Performance Events: Fam17h core perfctr, AMD PMU driver. [ 0.343148] ... version: 0 [ 0.343148] ... bit width: 48 [ 0.343148] ... generic registers: 6 [ 0.343149] ... value mask: 0000ffffffffffff [ 0.343149] ... max period: 00007fffffffffff [ 0.343149] ... fixed-purpose events: 0 [ 0.343149] ... event mask: 000000000000003f [ 0.343774] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.343784] smp: Bringing up secondary CPUs ... [ 0.343844] x86: Booting SMP configuration: [ 0.343845] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 [ 0.368662] smp: Brought up 1 node, 12 CPUs [ 0.368664] smpboot: Total of 12 processors activated (76791.64 BogoMIPS) [ 0.370275] devtmpfs: initialized [ 0.370319] x86/mm: Memory block size: 128MB [ 0.372731] evm: security.selinux [ 0.372732] evm: security.SMACK64 [ 0.372732] evm: security.SMACK64EXEC [ 0.372732] evm: security.SMACK64TRANSMUTE [ 0.372732] evm: security.SMACK64MMAP [ 0.372733] evm: security.ima [ 0.372733] evm: security.capability [ 0.372786] PM: Registering ACPI NVS region [mem 0xdc448000-0xdc819fff] (4005888 bytes) [ 0.372876] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.372891] futex hash table entries: 4096 (order: 6, 262144 bytes) [ 0.372976] pinctrl core: initialized pinctrl subsystem [ 0.373078] RTC time: 10:39:43, date: 09/21/17 [ 0.373175] NET: Registered protocol family 16 [ 0.383123] cpuidle: using governor ladder [ 0.399126] cpuidle: using governor menu [ 0.399128] PCCT header not found. [ 0.399302] ACPI: bus type PCI registered [ 0.399303] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.399358] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.399360] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.399365] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ 0.399430] PCI: Using configuration type 1 for base access [ 0.415273] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.415274] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.415565] ACPI: Added _OSI(Module Device) [ 0.415566] ACPI: Added _OSI(Processor Device) [ 0.415566] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.415567] ACPI: Added _OSI(Processor Aggregator Device) [ 0.415713] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.415724] ACPI: Executed 2 blocks of module-level executable AML code [ 0.420920] ACPI: Interpreter enabled [ 0.420931] ACPI: (supports S0 S3 S4 S5) [ 0.420932] ACPI: Using IOAPIC for interrupt routing [ 0.421033] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.425939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.425942] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.426087] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.426095] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.426315] PCI host bridge to bus 0000:00 [ 0.426317] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.426318] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.426318] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.426319] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.426320] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.426321] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.426321] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window] [ 0.426322] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.426323] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.426328] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000 [ 0.426396] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600 [ 0.426477] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.426535] pci 0000:00:01.1: [1022:1453] type 01 class 0x060400 [ 0.426577] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.426620] pci 0000:00:01.1: System wakeup disabled by ACPI [ 0.426646] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400 [ 0.426687] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold [ 0.426724] pci 0000:00:01.3: System wakeup disabled by ACPI [ 0.426752] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000 [ 0.426821] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000 [ 0.426876] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400 [ 0.426932] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.426976] pci 0000:00:03.1: System wakeup disabled by ACPI [ 0.427010] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000 [ 0.427083] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000 [ 0.427138] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400 [ 0.427171] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold [ 0.427199] pci 0000:00:07.1: System wakeup disabled by ACPI [ 0.427232] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.427286] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400 [ 0.427320] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.427349] pci 0000:00:08.1: System wakeup disabled by ACPI [ 0.427416] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.427612] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.427811] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000 [ 0.427857] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000 [ 0.427902] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000 [ 0.427947] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000 [ 0.427993] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000 [ 0.428037] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000 [ 0.428082] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000 [ 0.428125] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000 [ 0.428219] pci 0000:01:00.0: [144d:a804] type 00 class 0x010802 [ 0.428233] pci 0000:01:00.0: reg 0x10: [mem 0xfde00000-0xfde03fff 64bit] [ 0.440585] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.440590] pci 0000:00:01.1: bridge window [mem 0xfde00000-0xfdefffff] [ 0.440645] pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330 [ 0.440660] pci 0000:03:00.0: reg 0x10: [mem 0xfd9a0000-0xfd9a7fff 64bit] [ 0.440731] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.440764] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.440792] pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601 [ 0.440832] pci 0000:03:00.1: reg 0x24: [mem 0xfd980000-0xfd99ffff] [ 0.440838] pci 0000:03:00.1: reg 0x30: [mem 0xfd900000-0xfd97ffff pref] [ 0.440871] pci 0000:03:00.1: PME# supported from D3hot D3cold [ 0.440913] pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400 [ 0.440974] pci 0000:03:00.2: PME# supported from D3hot D3cold [ 0.452587] pci 0000:00:01.3: PCI bridge to [bus 03-10] [ 0.452590] pci 0000:00:01.3: bridge window [io 0xd000-0xefff] [ 0.452592] pci 0000:00:01.3: bridge window [mem 0xfd200000-0xfd9fffff] [ 0.452653] pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400 [ 0.452728] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.452786] pci 0000:04:02.0: [1022:43b4] type 01 class 0x060400 [ 0.452858] pci 0000:04:02.0: PME# supported from D3hot D3cold [ 0.452910] pci 0000:04:03.0: [1022:43b4] type 01 class 0x060400 [ 0.452981] pci 0000:04:03.0: PME# supported from D3hot D3cold [ 0.453035] pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400 [ 0.453106] pci 0000:04:04.0: PME# supported from D3hot D3cold [ 0.453172] pci 0000:03:00.2: PCI bridge to [bus 04-10] [ 0.453176] pci 0000:03:00.2: bridge window [io 0xd000-0xefff] [ 0.453179] pci 0000:03:00.2: bridge window [mem 0xfd200000-0xfd8fffff] [ 0.453213] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.453268] pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601 [ 0.453288] pci 0000:06:00.0: reg 0x10: [io 0xe050-0xe057] [ 0.453300] pci 0000:06:00.0: reg 0x14: [io 0xe040-0xe043] [ 0.453311] pci 0000:06:00.0: reg 0x18: [io 0xe030-0xe037] [ 0.453323] pci 0000:06:00.0: reg 0x1c: [io 0xe020-0xe023] [ 0.453334] pci 0000:06:00.0: reg 0x20: [io 0xe000-0xe01f] [ 0.453346] pci 0000:06:00.0: reg 0x24: [mem 0xfd800000-0xfd8001ff] [ 0.464592] pci 0000:04:02.0: PCI bridge to [bus 06] [ 0.464597] pci 0000:04:02.0: bridge window [io 0xe000-0xefff] [ 0.464600] pci 0000:04:02.0: bridge window [mem 0xfd800000-0xfd8fffff] [ 0.464667] pci 0000:07:00.0: [1b21:1184] type 01 class 0x060400 [ 0.464787] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.476592] pci 0000:04:03.0: PCI bridge to [bus 07-0f] [ 0.476597] pci 0000:04:03.0: bridge window [io 0xd000-0xdfff] [ 0.476599] pci 0000:04:03.0: bridge window [mem 0xfd200000-0xfd7fffff] [ 0.476697] pci 0000:08:01.0: [1b21:1184] type 01 class 0x060400 [ 0.476818] pci 0000:08:01.0: PME# supported from D0 D3hot D3cold [ 0.476894] pci 0000:08:03.0: [1b21:1184] type 01 class 0x060400 [ 0.477012] pci 0000:08:03.0: PME# supported from D0 D3hot D3cold [ 0.477090] pci 0000:08:05.0: [1b21:1184] type 01 class 0x060400 [ 0.477208] pci 0000:08:05.0: PME# supported from D0 D3hot D3cold [ 0.477284] pci 0000:08:07.0: [1b21:1184] type 01 class 0x060400 [ 0.477402] pci 0000:08:07.0: PME# supported from D0 D3hot D3cold [ 0.477497] pci 0000:07:00.0: PCI bridge to [bus 08-0f] [ 0.477503] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff] [ 0.477507] pci 0000:07:00.0: bridge window [mem 0xfd200000-0xfd7fffff] [ 0.477597] pci 0000:09:00.0: [8086:24fb] type 00 class 0x028000 [ 0.477642] pci 0000:09:00.0: reg 0x10: [mem 0xfd700000-0xfd701fff 64bit] [ 0.477863] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.488607] pci 0000:08:01.0: PCI bridge to [bus 09] [ 0.488617] pci 0000:08:01.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.488714] pci 0000:0a:00.0: [12d8:2304] type 01 class 0x060400 [ 0.488890] pci 0000:0a:00.0: supports D1 D2 [ 0.488891] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.488978] pci 0000:08:03.0: PCI bridge to [bus 0a-0d] [ 0.488988] pci 0000:08:03.0: bridge window [mem 0xfd200000-0xfd5fffff] [ 0.489081] pci 0000:0b:01.0: [12d8:2304] type 01 class 0x060400 [ 0.489255] pci 0000:0b:01.0: supports D1 D2 [ 0.489256] pci 0000:0b:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489363] pci 0000:0b:02.0: [12d8:2304] type 01 class 0x060400 [ 0.489537] pci 0000:0b:02.0: supports D1 D2 [ 0.489537] pci 0000:0b:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.489680] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] [ 0.489692] pci 0000:0a:00.0: bridge window [mem 0xfd200000-0xfd5fffff] [ 0.489785] pci 0000:0c:00.0: [14f1:8880] type 00 class 0x040000 [ 0.489827] pci 0000:0c:00.0: reg 0x10: [mem 0xfd400000-0xfd5fffff 64bit] [ 0.490051] pci 0000:0c:00.0: supports D1 D2 [ 0.490051] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.490144] pci 0000:0b:01.0: PCI bridge to [bus 0c] [ 0.490157] pci 0000:0b:01.0: bridge window [mem 0xfd400000-0xfd5fffff] [ 0.490251] pci 0000:0d:00.0: [14f1:8880] type 00 class 0x040000 [ 0.490293] pci 0000:0d:00.0: reg 0x10: [mem 0xfd200000-0xfd3fffff 64bit] [ 0.490517] pci 0000:0d:00.0: supports D1 D2 [ 0.490518] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.490615] pci 0000:0b:02.0: PCI bridge to [bus 0d] [ 0.490628] pci 0000:0b:02.0: bridge window [mem 0xfd200000-0xfd3fffff] [ 0.490742] pci 0000:0e:00.0: [8086:1539] type 00 class 0x020000 [ 0.490776] pci 0000:0e:00.0: reg 0x10: [mem 0xfd600000-0xfd61ffff] [ 0.490814] pci 0000:0e:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.490833] pci 0000:0e:00.0: reg 0x1c: [mem 0xfd620000-0xfd623fff] [ 0.491018] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold [ 0.500603] pci 0000:08:05.0: PCI bridge to [bus 0e] [ 0.500610] pci 0000:08:05.0: bridge window [io 0xd000-0xdfff] [ 0.500614] pci 0000:08:05.0: bridge window [mem 0xfd600000-0xfd6fffff] [ 0.500685] pci 0000:08:07.0: PCI bridge to [bus 0f] [ 0.500767] pci 0000:04:04.0: PCI bridge to [bus 10] [ 0.500842] pci 0000:11:00.0: [10de:1d01] type 00 class 0x030000 [ 0.500857] pci 0000:11:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff] [ 0.500871] pci 0000:11:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.500884] pci 0000:11:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.500893] pci 0000:11:00.0: reg 0x24: [io 0xf000-0xf07f] [ 0.500902] pci 0000:11:00.0: reg 0x30: [mem 0xfd000000-0xfd07ffff pref] [ 0.501037] pci 0000:11:00.1: [10de:0fb8] type 00 class 0x040300 [ 0.501052] pci 0000:11:00.1: reg 0x10: [mem 0xfd080000-0xfd083fff] [ 0.512601] pci 0000:00:03.1: PCI bridge to [bus 11] [ 0.512605] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.512607] pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff] [ 0.512611] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.512658] pci 0000:12:00.0: [1022:145a] type 00 class 0x130000 [ 0.512732] pci 0000:12:00.2: [1022:1456] type 00 class 0x108000 [ 0.512742] pci 0000:12:00.2: reg 0x18: [mem 0xfdb00000-0xfdbfffff] [ 0.512750] pci 0000:12:00.2: reg 0x24: [mem 0xfdc00000-0xfdc01fff] [ 0.512807] pci 0000:12:00.3: [1022:145c] type 00 class 0x0c0330 [ 0.512815] pci 0000:12:00.3: reg 0x10: [mem 0xfda00000-0xfdafffff 64bit] [ 0.512852] pci 0000:12:00.3: PME# supported from D0 D3hot D3cold [ 0.512864] pci 0000:12:00.3: System wakeup disabled by ACPI [ 0.512896] pci 0000:00:07.1: PCI bridge to [bus 12] [ 0.512899] pci 0000:00:07.1: bridge window [mem 0xfda00000-0xfdcfffff] [ 0.512939] pci 0000:13:00.0: [1022:1455] type 00 class 0x130000 [ 0.513009] pci 0000:13:00.2: [1022:7901] type 00 class 0x010601 [ 0.513032] pci 0000:13:00.2: reg 0x24: [mem 0xfdd08000-0xfdd08fff] [ 0.513060] pci 0000:13:00.2: PME# supported from D3hot D3cold [ 0.513095] pci 0000:13:00.3: [1022:1457] type 00 class 0x040300 [ 0.513101] pci 0000:13:00.3: reg 0x10: [mem 0xfdd00000-0xfdd07fff] [ 0.513138] pci 0000:13:00.3: PME# supported from D0 D3hot D3cold [ 0.513180] pci 0000:00:08.1: PCI bridge to [bus 13] [ 0.513183] pci 0000:00:08.1: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.513375] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) 0 [ 0.513417] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) 0 [ 0.513452] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) 0 [ 0.513496] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) 0 [ 0.513536] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) 0 [ 0.513570] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) 0 [ 0.513606] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) 0 [ 0.513642] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) 0 [ 0.514140] SCSI subsystem initialized [ 0.514183] libata version 3.00 loaded. [ 0.514221] pci 0000:11:00.0: vgaarb: setting as boot VGA device [ 0.514222] pci 0000:11:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.514223] pci 0000:11:00.0: vgaarb: bridge control possible [ 0.514223] vgaarb: loaded [ 0.514236] ACPI: bus type USB registered [ 0.514245] usbcore: registered new interface driver usbfs [ 0.514250] usbcore: registered new interface driver hub [ 0.514275] usbcore: registered new device driver usb [ 0.514344] Registered efivars operations [ 0.532953] PCI: Using ACPI for IRQ routing [ 0.536547] PCI: pci_cache_line_size set to 64 bytes [ 0.536659] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 0.536660] e820: reserve RAM buffer [mem 0xdadeb000-0xdbffffff] [ 0.536661] e820: reserve RAM buffer [mem 0xdc448000-0xdfffffff] [ 0.536662] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.536662] e820: reserve RAM buffer [mem 0x21f380000-0x21fffffff] [ 0.536732] NetLabel: Initializing [ 0.536733] NetLabel: domain hash size = 128 [ 0.536733] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.536743] NetLabel: unlabeled traffic allowed by default [ 0.536858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.536860] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.538911] clocksource: Switched to clocksource hpet [ 0.544577] VFS: Disk quotas dquot_6.6.0 [ 0.544595] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.544684] AppArmor: AppArmor Filesystem Enabled [ 0.544724] pnp: PnP ACPI init [ 0.544839] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.544842] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.544903] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 0.544904] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.544983] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.545119] system 00:03: [io 0x0280-0x028f] has been reserved [ 0.545120] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.545121] system 00:03: [io 0x02a0-0x02af] has been reserved [ 0.545122] system 00:03: [io 0x02b0-0x02bf] has been reserved [ 0.545123] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.545302] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.545302] system 00:04: [io 0x040b] has been reserved [ 0.545303] system 00:04: [io 0x04d6] has been reserved [ 0.545304] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.545305] system 00:04: [io 0x0c14] has been reserved [ 0.545305] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.545306] system 00:04: [io 0x0c52] has been reserved [ 0.545307] system 00:04: [io 0x0c6c] has been reserved [ 0.545307] system 00:04: [io 0x0c6f] has been reserved [ 0.545308] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.545309] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.545310] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.545310] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.545311] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.545312] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.545313] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.545313] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.545314] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.545315] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.545316] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.545317] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.545318] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.545319] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.545320] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.545321] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.545321] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.545323] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.545573] pnp: PnP ACPI: found 5 devices [ 0.551605] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.551740] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.551743] pci 0000:00:01.1: bridge window [mem 0xfde00000-0xfdefffff] [ 0.551747] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.551756] pci 0000:04:02.0: PCI bridge to [bus 06] [ 0.551757] pci 0000:04:02.0: bridge window [io 0xe000-0xefff] [ 0.551760] pci 0000:04:02.0: bridge window [mem 0xfd800000-0xfd8fffff] [ 0.551767] pci 0000:08:01.0: PCI bridge to [bus 09] [ 0.551772] pci 0000:08:01.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.551782] pci 0000:0b:01.0: PCI bridge to [bus 0c] [ 0.551788] pci 0000:0b:01.0: bridge window [mem 0xfd400000-0xfd5fffff] [ 0.551801] pci 0000:0b:02.0: PCI bridge to [bus 0d] [ 0.551807] pci 0000:0b:02.0: bridge window [mem 0xfd200000-0xfd3fffff] [ 0.551819] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] [ 0.551826] pci 0000:0a:00.0: bridge window [mem 0xfd200000-0xfd5fffff] [ 0.551838] pci 0000:08:03.0: PCI bridge to [bus 0a-0d] [ 0.551843] pci 0000:08:03.0: bridge window [mem 0xfd200000-0xfd5fffff] [ 0.551853] pci 0000:08:05.0: PCI bridge to [bus 0e] [ 0.551855] pci 0000:08:05.0: bridge window [io 0xd000-0xdfff] [ 0.551860] pci 0000:08:05.0: bridge window [mem 0xfd600000-0xfd6fffff] [ 0.551869] pci 0000:08:07.0: PCI bridge to [bus 0f] [ 0.551883] pci 0000:07:00.0: PCI bridge to [bus 08-0f] [ 0.551885] pci 0000:07:00.0: bridge window [io 0xd000-0xdfff] [ 0.551890] pci 0000:07:00.0: bridge window [mem 0xfd200000-0xfd7fffff] [ 0.551900] pci 0000:04:03.0: PCI bridge to [bus 07-0f] [ 0.551901] pci 0000:04:03.0: bridge window [io 0xd000-0xdfff] [ 0.551904] pci 0000:04:03.0: bridge window [mem 0xfd200000-0xfd7fffff] [ 0.551910] pci 0000:04:04.0: PCI bridge to [bus 10] [ 0.551918] pci 0000:03:00.2: PCI bridge to [bus 04-10] [ 0.551920] pci 0000:03:00.2: bridge window [io 0xd000-0xefff] [ 0.551923] pci 0000:03:00.2: bridge window [mem 0xfd200000-0xfd8fffff] [ 0.551928] pci 0000:00:01.3: PCI bridge to [bus 03-10] [ 0.551929] pci 0000:00:01.3: bridge window [io 0xd000-0xefff] [ 0.551931] pci 0000:00:01.3: bridge window [mem 0xfd200000-0xfd9fffff] [ 0.551935] pci 0000:00:03.1: PCI bridge to [bus 11] [ 0.551936] pci 0000:00:03.1: bridge window [io 0xf000-0xffff] [ 0.551939] pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff] [ 0.551940] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.551944] pci 0000:00:07.1: PCI bridge to [bus 12] [ 0.551946] pci 0000:00:07.1: bridge window [mem 0xfda00000-0xfdcfffff] [ 0.551949] pci 0000:00:08.1: PCI bridge to [bus 13] [ 0.551951] pci 0000:00:08.1: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.551955] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.551956] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.551957] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.551957] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.551958] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.551959] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.551960] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.551960] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.551961] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.551962] pci_bus 0000:03: resource 0 [io 0xd000-0xefff] [ 0.551962] pci_bus 0000:03: resource 1 [mem 0xfd200000-0xfd9fffff] [ 0.551963] pci_bus 0000:04: resource 0 [io 0xd000-0xefff] [ 0.551964] pci_bus 0000:04: resource 1 [mem 0xfd200000-0xfd8fffff] [ 0.551964] pci_bus 0000:06: resource 0 [io 0xe000-0xefff] [ 0.551965] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff] [ 0.551966] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff] [ 0.551966] pci_bus 0000:07: resource 1 [mem 0xfd200000-0xfd7fffff] [ 0.551967] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.551968] pci_bus 0000:08: resource 1 [mem 0xfd200000-0xfd7fffff] [ 0.551968] pci_bus 0000:09: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.551969] pci_bus 0000:0a: resource 1 [mem 0xfd200000-0xfd5fffff] [ 0.551970] pci_bus 0000:0b: resource 1 [mem 0xfd200000-0xfd5fffff] [ 0.551970] pci_bus 0000:0c: resource 1 [mem 0xfd400000-0xfd5fffff] [ 0.551971] pci_bus 0000:0d: resource 1 [mem 0xfd200000-0xfd3fffff] [ 0.551972] pci_bus 0000:0e: resource 0 [io 0xd000-0xdfff] [ 0.551972] pci_bus 0000:0e: resource 1 [mem 0xfd600000-0xfd6fffff] [ 0.551973] pci_bus 0000:11: resource 0 [io 0xf000-0xffff] [ 0.551974] pci_bus 0000:11: resource 1 [mem 0xfc000000-0xfd0fffff] [ 0.551975] pci_bus 0000:11: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.551975] pci_bus 0000:12: resource 1 [mem 0xfda00000-0xfdcfffff] [ 0.551976] pci_bus 0000:13: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.552023] NET: Registered protocol family 2 [ 0.552189] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.552290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.552431] TCP: Hash tables configured (established 65536 bind 65536) [ 0.552460] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.552485] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.552541] NET: Registered protocol family 1 [ 0.552724] pci 0000:11:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.552820] PCI: CLS 64 bytes, default 64 [ 0.552855] Unpacking initramfs... [ 0.994339] Freeing initrd memory: 41964K [ 0.994397] AMD-Vi: IOMMU performance counters supported [ 0.994494] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.994495] pci 0000:00:00.2: PCI INT A: not connected [ 0.994761] iommu: Adding device 0000:00:01.0 to group 0 [ 0.994859] iommu: Adding device 0000:00:01.1 to group 1 [ 0.994960] iommu: Adding device 0000:00:01.3 to group 2 [ 0.995079] iommu: Adding device 0000:00:02.0 to group 3 [ 0.995182] iommu: Adding device 0000:00:03.0 to group 4 [ 0.995282] iommu: Adding device 0000:00:03.1 to group 5 [ 0.995380] iommu: Adding device 0000:00:04.0 to group 6 [ 0.995483] iommu: Adding device 0000:00:07.0 to group 7 [ 0.995498] iommu: Adding device 0000:00:07.1 to group 7 [ 0.995603] iommu: Adding device 0000:00:08.0 to group 8 [ 0.995617] iommu: Adding device 0000:00:08.1 to group 8 [ 0.995723] iommu: Adding device 0000:00:14.0 to group 9 [ 0.995736] iommu: Adding device 0000:00:14.3 to group 9 [ 0.995859] iommu: Adding device 0000:00:18.0 to group 10 [ 0.995872] iommu: Adding device 0000:00:18.1 to group 10 [ 0.995886] iommu: Adding device 0000:00:18.2 to group 10 [ 0.995898] iommu: Adding device 0000:00:18.3 to group 10 [ 0.995911] iommu: Adding device 0000:00:18.4 to group 10 [ 0.995922] iommu: Adding device 0000:00:18.5 to group 10 [ 0.995933] iommu: Adding device 0000:00:18.6 to group 10 [ 0.995945] iommu: Adding device 0000:00:18.7 to group 10 [ 0.996046] iommu: Adding device 0000:01:00.0 to group 11 [ 0.996159] iommu: Adding device 0000:03:00.0 to group 12 [ 0.996179] iommu: Adding device 0000:03:00.1 to group 12 [ 0.996199] iommu: Adding device 0000:03:00.2 to group 12 [ 0.996211] iommu: Adding device 0000:04:00.0 to group 12 [ 0.996221] iommu: Adding device 0000:04:02.0 to group 12 [ 0.996232] iommu: Adding device 0000:04:03.0 to group 12 [ 0.996244] iommu: Adding device 0000:04:04.0 to group 12 [ 0.996256] iommu: Adding device 0000:06:00.0 to group 12 [ 0.996272] iommu: Adding device 0000:07:00.0 to group 12 [ 0.996285] iommu: Adding device 0000:08:01.0 to group 12 [ 0.996298] iommu: Adding device 0000:08:03.0 to group 12 [ 0.996311] iommu: Adding device 0000:08:05.0 to group 12 [ 0.996324] iommu: Adding device 0000:08:07.0 to group 12 [ 0.996347] iommu: Adding device 0000:09:00.0 to group 12 [ 0.996367] iommu: Adding device 0000:0a:00.0 to group 12 [ 0.996385] iommu: Adding device 0000:0b:01.0 to group 12 [ 0.996403] iommu: Adding device 0000:0b:02.0 to group 12 [ 0.996431] iommu: Adding device 0000:0c:00.0 to group 12 [ 0.996459] iommu: Adding device 0000:0d:00.0 to group 12 [ 0.996477] iommu: Adding device 0000:0e:00.0 to group 12 [ 0.996592] iommu: Adding device 0000:11:00.0 to group 13 [ 0.996619] iommu: Adding device 0000:11:00.1 to group 13 [ 0.996630] iommu: Adding device 0000:12:00.0 to group 7 [ 0.996639] iommu: Adding device 0000:12:00.2 to group 7 [ 0.996647] iommu: Adding device 0000:12:00.3 to group 7 [ 0.996657] iommu: Adding device 0000:13:00.0 to group 8 [ 0.996666] iommu: Adding device 0000:13:00.2 to group 8 [ 0.996674] iommu: Adding device 0000:13:00.3 to group 8 [ 0.996964] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.996965] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.996966] PPR NX GT IA GA PC GA_vAPIC [ 0.996968] AMD-Vi: Interrupt remapping enabled [ 0.996968] AMD-Vi: virtual APIC enabled [ 0.997092] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.997792] perf: AMD NB counters detected [ 0.997817] perf: AMD L2I counters detected [ 0.998274] perf: amd_iommu: Detected. (0 banks, 0 counters/bank) [ 0.998349] Scanning for low memory corruption every 60 seconds [ 0.998762] audit: initializing netlink subsys (disabled) [ 0.998811] audit: type=2000 audit(1505990383.724:1): initialized [ 0.999087] Initialise system trusted keyrings [ 0.999195] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.000166] zbud: loaded [ 1.000534] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.000684] fuse init (API version 7.26) [ 1.001907] Key type asymmetric registered [ 1.001909] Asymmetric key parser 'x509' registered [ 1.001931] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.001971] io scheduler noop registered [ 1.001971] io scheduler deadline registered [ 1.001976] io scheduler cfq registered (default) [ 1.005163] pcieport 0000:00:01.1: AER enabled with IRQ 218 [ 1.005213] pcieport 0000:00:01.3: AER enabled with IRQ 219 [ 1.005230] pcieport 0000:00:03.1: AER enabled with IRQ 220 [ 1.005239] pcieport 0000:00:01.1: Signaling PME with IRQ 218 [ 1.005244] pcieport 0000:00:01.3: Signaling PME with IRQ 219 [ 1.005250] pcieport 0000:00:03.1: Signaling PME with IRQ 220 [ 1.005261] pcieport 0000:00:07.1: Signaling PME with IRQ 221 [ 1.005272] pcieport 0000:00:08.1: Signaling PME with IRQ 223 [ 1.005302] efifb: probing for efifb [ 1.005316] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k [ 1.005317] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.005317] efifb: scrolling: redraw [ 1.005318] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.005390] Console: switching to colour frame buffer device 128x48 [ 1.005399] fb0: EFI VGA frame buffer device [ 1.005462] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.005465] ACPI: Power Button [PWRB] [ 1.005487] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.005488] ACPI: Power Button [PWRF] [ 1.006537] GHES: HEST is not enabled! [ 1.006612] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.007777] Linux agpgart interface v0.103 [ 1.010792] loop: module loaded [ 1.010903] libphy: Fixed MDIO Bus: probed [ 1.010904] tun: Universal TUN/TAP device driver, 1.6 [ 1.010904] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 1.010931] PPP generic driver version 2.4.2 [ 1.010965] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.010972] ehci-pci: EHCI PCI platform driver [ 1.010979] ehci-platform: EHCI generic platform driver [ 1.010994] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.010996] ohci-pci: OHCI PCI platform driver [ 1.011002] ohci-platform: OHCI generic platform driver [ 1.011006] uhci_hcd: USB Universal Host Controller Interface driver [ 1.011075] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.011079] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 1.066319] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410 [ 1.066404] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.066405] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.066405] usb usb1: Product: xHCI Host Controller [ 1.066406] usb usb1: Manufacturer: Linux 4.10.0-32201708161632-generic xhci-hcd [ 1.066407] usb usb1: SerialNumber: 0000:03:00.0 [ 1.066495] hub 1-0:1.0: USB hub found [ 1.066509] hub 1-0:1.0: 14 ports detected [ 1.067449] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 1.067451] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2 [ 1.067452] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.067476] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.067486] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.067487] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.067488] usb usb2: Product: xHCI Host Controller [ 1.067488] usb usb2: Manufacturer: Linux 4.10.0-32201708161632-generic xhci-hcd [ 1.067489] usb usb2: SerialNumber: 0000:03:00.0 [ 1.067556] hub 2-0:1.0: USB hub found [ 1.067565] hub 2-0:1.0: 8 ports detected [ 1.068176] xhci_hcd 0000:12:00.3: xHCI Host Controller [ 1.068179] xhci_hcd 0000:12:00.3: new USB bus registered, assigned bus number 3 [ 1.068282] xhci_hcd 0000:12:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410 [ 1.068336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.068337] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.068337] usb usb3: Product: xHCI Host Controller [ 1.068338] usb usb3: Manufacturer: Linux 4.10.0-32201708161632-generic xhci-hcd [ 1.068339] usb usb3: SerialNumber: 0000:12:00.3 [ 1.068430] hub 3-0:1.0: USB hub found [ 1.068434] hub 3-0:1.0: 4 ports detected [ 1.068572] xhci_hcd 0000:12:00.3: xHCI Host Controller [ 1.068573] xhci_hcd 0000:12:00.3: new USB bus registered, assigned bus number 4 [ 1.068581] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.068591] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.068592] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.068592] usb usb4: Product: xHCI Host Controller [ 1.068593] usb usb4: Manufacturer: Linux 4.10.0-32201708161632-generic xhci-hcd [ 1.068594] usb usb4: SerialNumber: 0000:12:00.3 [ 1.068662] hub 4-0:1.0: USB hub found [ 1.068666] hub 4-0:1.0: 4 ports detected [ 1.068814] i8042: PNP: No PS/2 controller found. [ 1.068877] mousedev: PS/2 mouse device common for all mice [ 1.069000] rtc_cmos 00:02: RTC can wake from S4 [ 1.069209] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.069262] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.069265] i2c /dev entries driver [ 1.069300] device-mapper: uevent: version 1.0.3 [ 1.069346] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.069557] ledtrig-cpu: registered to indicate activity on CPUs [ 1.069559] EFI Variables Facility v0.08 2004-May-17 [ 1.088744] NET: Registered protocol family 10 [ 1.091558] Segment Routing with IPv6 [ 1.091570] NET: Registered protocol family 17 [ 1.091577] Key type dns_resolver registered [ 1.098835] microcode: CPU0: patch_level=0x08001129 [ 1.098843] microcode: CPU1: patch_level=0x08001129 [ 1.098860] microcode: CPU2: patch_level=0x08001129 [ 1.098866] microcode: CPU3: patch_level=0x08001129 [ 1.098881] microcode: CPU4: patch_level=0x08001129 [ 1.098888] microcode: CPU5: patch_level=0x08001129 [ 1.098904] microcode: CPU6: patch_level=0x08001129 [ 1.098909] microcode: CPU7: patch_level=0x08001129 [ 1.098913] microcode: CPU8: patch_level=0x08001129 [ 1.098917] microcode: CPU9: patch_level=0x08001129 [ 1.098923] microcode: CPU10: patch_level=0x08001129 [ 1.098927] microcode: CPU11: patch_level=0x08001129 [ 1.098961] microcode: Microcode Update Driver: v2.2. [ 1.099088] registered taskstats version 1 [ 1.099096] Loading compiled-in X.509 certificates [ 1.100692] Loaded X.509 cert 'Build time autogenerated kernel key: f66f3f4af1c2f644a1cb2b18b490acf4545608bf' [ 1.100707] zswap: loaded using pool lzo/zbud [ 1.109485] Key type big_key registered [ 1.109488] Key type trusted registered [ 1.110525] Key type encrypted registered [ 1.110527] AppArmor: AppArmor sha1 policy hashing enabled [ 1.110530] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.110542] evm: HMAC attrs: 0x1 [ 1.110981] Magic number: 1:788:679 [ 1.111161] rtc_cmos 00:02: setting system clock to 2017-09-21 10:39:44 UTC (1505990384) [ 1.111275] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.111615] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.111616] EDD information not available. [ 1.111657] PM: Hibernation image not present or could not be loaded. [ 1.113229] Freeing unused kernel memory: 2232K [ 1.113229] Write protecting the kernel read-only data: 14336k [ 1.113653] Freeing unused kernel memory: 1140K [ 1.114117] Freeing unused kernel memory: 280K [ 1.119817] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.127584] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.127641] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.127647] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.127966] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.127987] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.129678] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.129912] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.129949] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.129980] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.130011] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.152000] wmi: Mapper loaded [ 1.152332] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 1.161882] ahci 0000:03:00.1: version 3.0 [ 1.162046] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled [ 1.162105] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode [ 1.162107] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.162262] nvme nvme0: pci function 0000:01:00.0 [ 1.162823] scsi host0: ahci [ 1.162912] scsi host1: ahci [ 1.162998] scsi host2: ahci [ 1.163094] scsi host3: ahci [ 1.163175] scsi host4: ahci [ 1.163272] scsi host5: ahci [ 1.163324] pps_core: LinuxPPS API ver. 1 registered [ 1.163325] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 1.163379] scsi host6: ahci [ 1.163455] scsi host7: ahci [ 1.163497] ata1: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980100 irq 243 [ 1.163499] ata2: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980180 irq 243 [ 1.163500] ata3: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980200 irq 243 [ 1.163501] ata4: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980280 irq 243 [ 1.163502] ata5: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980300 irq 243 [ 1.163504] ata6: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980380 irq 243 [ 1.163505] ata7: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980400 irq 243 [ 1.163506] ata8: SATA max UDMA/133 abar m131072@0xfd980000 port 0xfd980480 irq 243 [ 1.163632] ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled [ 1.163670] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.163671] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 1.163902] scsi host8: ahci [ 1.163988] scsi host9: ahci [ 1.164030] ata9: SATA max UDMA/133 abar m512@0xfd800000 port 0xfd800100 irq 246 [ 1.164034] ata10: SATA max UDMA/133 abar m512@0xfd800000 port 0xfd800180 irq 246 [ 1.164100] PTP clock support registered [ 1.164165] ahci 0000:13:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.164166] ahci 0000:13:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.164298] scsi host10: ahci [ 1.164325] ata11: SATA max UDMA/133 abar m4096@0xfdd08000 port 0xfdd08100 irq 248 [ 1.164785] dca service started, version 1.12.1 [ 1.166981] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 1.166981] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.169787] [drm] Initialized [ 1.195640] pps pps0: new PPS source ptp0 [ 1.195641] igb 0000:0e:00.0: added PHC on eth0 [ 1.195641] igb 0000:0e:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.195642] igb 0000:0e:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:39:50:01 [ 1.195643] igb 0000:0e:00.0: eth0: PBA No: FFFFFF-0FF [ 1.195644] igb 0000:0e:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s) [ 1.196067] MXM: GUID detected in BIOS [ 1.196199] nouveau 0000:11:00.0: unknown chipset (138000a1) [ 1.196203] nouveau: probe of 0000:11:00.0 failed with error -12 [ 1.196642] igb 0000:0e:00.0 enp14s0: renamed from eth0 [ 1.394941] nvme0n1: p1 p2 [ 1.455097] usb 1-7: new full-speed USB device number 2 using xhci_hcd [ 1.478300] ata11: SATA link down (SStatus 0 SControl 300) [ 1.478308] ata9: SATA link down (SStatus 0 SControl 300) [ 1.639432] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.639943] ata1.00: HPA detected: current 7814035055, native 7814037168 [ 1.639993] ata1.00: ATA-9: WDC WD40EZRX-00SPEB0, 80.00A80, max UDMA/133 [ 1.639994] ata1.00: 7814035055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.640566] ata1.00: configured for UDMA/133 [ 1.640896] scsi 0:0:0:0: Direct-Access ATA WDC WD40EZRX-00S 0A80 PQ: 0 ANSI: 5 [ 1.667457] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.667571] sd 0:0:0:0: [sda] 7814035055 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 1.667573] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.667603] sd 0:0:0:0: [sda] Write Protect is off [ 1.667604] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.667641] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.746737] sda: sda1 [ 1.747242] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.835000] usb 1-7: New USB device found, idVendor=045e, idProduct=0745 [ 1.835001] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.835002] usb 1-7: Product: Microsoft® 2.4GHz Transceiver v8.0 [ 1.835003] usb 1-7: Manufacturer: Microsoft [ 1.840201] hidraw: raw HID events driver (C) Jiri Kosina [ 1.865270] usbcore: registered new interface driver usbhid [ 1.865271] usbhid: USB HID core driver [ 1.866524] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:045E:0745.0001/input/input2 [ 1.923744] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:03:00.0-7/input0 [ 1.924032] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.1/0003:045E:0745.0002/input/input3 [ 1.982369] ata2: SATA link down (SStatus 0 SControl 300) [ 1.983327] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:03:00.0-7/input1 [ 1.999864] tsc: Refined TSC clocksource calibration: 3200.163 MHz [ 1.999874] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e20e3fa9db, max_idle_ns: 440795275320 ns [ 2.015199] usb 1-9: new full-speed USB device number 3 using xhci_hcd [ 2.024941] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:045E:0745.0003/input/input4 [ 2.083674] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:03:00.0-7/input2 [ 2.390481] usb 1-9: New USB device found, idVendor=8087, idProduct=0aa7 [ 2.390483] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.459559] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.460191] ata3.00: ATA-9: ST4000DM000-1F2168, CC54, max UDMA/133 [ 2.460192] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.460776] ata3.00: configured for UDMA/133 [ 2.461167] scsi 2:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC54 PQ: 0 ANSI: 5 [ 2.491729] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.491919] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.491920] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 2.491938] sd 2:0:0:0: [sdb] Write Protect is off [ 2.491939] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.491978] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.532753] sdb: sdb1 [ 2.533214] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.807195] ata4: SATA link down (SStatus 0 SControl 300) [ 3.023981] clocksource: Switched to clocksource tsc [ 3.122767] ata5: SATA link down (SStatus 0 SControl 300) [ 3.439032] ata6: SATA link down (SStatus 0 SControl 300) [ 3.915782] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.916273] ata7.00: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100 [ 3.916971] ata7.00: configured for UDMA/100 [ 3.918044] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5 [ 3.918488] random: fast init done [ 3.941977] sr 6:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.941978] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.942116] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 3.942267] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 4.254748] ata8: SATA link down (SStatus 0 SControl 300) [ 4.570929] ata10: SATA link down (SStatus 0 SControl 300) [ 4.806648] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.876400] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.929151] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.929360] systemd[1]: Detected architecture x86-64. [ 4.929472] systemd[1]: Set hostname to . [ 4.966811] systemd[1]: Listening on Syslog Socket. [ 4.966850] systemd[1]: Listening on fsck to fsckd communication Socket. [ 4.966870] systemd[1]: Listening on udev Control Socket. [ 4.967098] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.967180] systemd[1]: Created slice System Slice. [ 4.967474] systemd[1]: Mounting Debug File System... [ 4.967524] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.979388] lp: driver loaded but no devices found [ 4.981357] ppdev: user-space parallel port driver [ 5.014921] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro [ 5.019282] systemd-journald[349]: Received request to flush runtime journal from PID 1 [ 5.048328] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS [ 5.116391] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.130116] random: crng init done [ 5.135845] Bluetooth: Core ver 2.22 [ 5.135875] NET: Registered protocol family 31 [ 5.135876] Bluetooth: HCI device and connection manager initialized [ 5.135879] Bluetooth: HCI socket layer initialized [ 5.135881] Bluetooth: L2CAP socket layer initialized [ 5.135885] Bluetooth: SCO socket layer initialized [ 5.140912] usbcore: registered new interface driver btusb [ 5.157562] Bluetooth: hci0: read Intel version: 370810225019140f0d [ 5.157563] Bluetooth: hci0: Intel device is already patched. patch num: 0d [ 5.161558] Intel(R) Wireless WiFi driver for Linux [ 5.161559] Copyright(c) 2003- 2015 Intel Corporation [ 5.161632] iwlwifi 0000:09:00.0: enabling device (0000 -> 0002) [ 5.162040] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.162041] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 5.162858] iwlwifi 0000:09:00.0: Direct firmware load for iwlwifi-3168-26.ucode failed with error -2 [ 5.163077] iwlwifi 0000:09:00.0: Direct firmware load for iwlwifi-3168-25.ucode failed with error -2 [ 5.163084] iwlwifi 0000:09:00.0: Direct firmware load for iwlwifi-3168-24.ucode failed with error -2 [ 5.163566] iwlwifi 0000:09:00.0: Direct firmware load for iwlwifi-3168-23.ucode failed with error -2 [ 5.164272] ccp 0000:12:00.2: enabling device (0000 -> 0002) [ 5.164344] ccp 0000:12:00.2: 3 command queues available [ 5.164418] ccp 0000:12:00.2: Queue 2 can access 4 LSB regions [ 5.164419] ccp 0000:12:00.2: Queue 3 can access 4 LSB regions [ 5.164420] ccp 0000:12:00.2: Queue 4 can access 4 LSB regions [ 5.164421] ccp 0000:12:00.2: Queue 0 gets LSB 4 [ 5.164422] ccp 0000:12:00.2: Queue 1 gets LSB 5 [ 5.164422] ccp 0000:12:00.2: Queue 2 gets LSB 6 [ 5.165254] ccp 0000:12:00.2: enabled [ 5.167919] iwlwifi 0000:09:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm [ 5.184731] media: Linux media interface: v0.10 [ 5.185280] snd_hda_intel 0000:11:00.1: Disabling MSI [ 5.185293] snd_hda_intel 0000:11:00.1: Handle vga_switcheroo audio client [ 5.185418] snd_hda_intel 0000:13:00.3: enabling device (0000 -> 0002) [ 5.185820] iwlwifi 0000:09:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220 [ 5.188020] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 5.188201] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 5.189391] Linux video capture interface: v2.00 [ 5.191297] AVX2 version of gcm_enc/dec engaged. [ 5.191298] AES CTR mode by8 optimization enabled [ 5.200759] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 5.200761] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.200762] snd_hda_codec_generic hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 5.200763] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0 [ 5.200764] snd_hda_codec_generic hdaudioC1D0: dig-out=0x1e/0x0 [ 5.200765] snd_hda_codec_generic hdaudioC1D0: inputs: [ 5.200766] snd_hda_codec_generic hdaudioC1D0: Front Mic=0x19 [ 5.200767] snd_hda_codec_generic hdaudioC1D0: Rear Mic=0x18 [ 5.200768] snd_hda_codec_generic hdaudioC1D0: Line=0x1a [ 5.212217] cx23885: cx23885 driver version 0.0.4 loaded [ 5.212295] cx23885 0000:0c:00.0: enabling device (0000 -> 0002) [ 5.212418] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:13:00.3/sound/card1/input5 [ 5.212487] cx23885: CORE cx23885[0]: subsystem: 0070:6a18, board: Hauppauge WinTV-QuadHD-ATSC [card=57,autodetected] [ 5.212497] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:13:00.3/sound/card1/input6 [ 5.212552] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:13:00.3/sound/card1/input7 [ 5.212608] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:13:00.3/sound/card1/input8 [ 5.212663] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:13:00.3/sound/card1/input9 [ 5.212720] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:13:00.3/sound/card1/input10 [ 5.212778] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:13:00.3/sound/card1/input11 [ 5.237339] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 5.240204] kvm: disabled by bios [ 5.242277] EDAC MC: Ver: 3.0.0 [ 5.245839] MCE: In-kernel MCE decoding enabled. [ 5.247361] EDAC amd64: DRAM ECC disabled. [ 5.247362] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 5.276685] iwlwifi 0000:09:00.0 wlp9s0: renamed from wlan0 [ 5.384229] EDAC amd64: DRAM ECC disabled. [ 5.384230] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 5.427953] audit: type=1400 audit(1505990388.812:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=920 comm="apparmor_parser" [ 5.427968] audit: type=1400 audit(1505990388.812:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=917 comm="apparmor_parser" [ 5.428008] audit: type=1400 audit(1505990388.812:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=925 comm="apparmor_parser" [ 5.428560] audit: type=1400 audit(1505990388.812:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=916 comm="apparmor_parser" [ 5.429246] audit: type=1400 audit(1505990388.812:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=919 comm="apparmor_parser" [ 5.429248] audit: type=1400 audit(1505990388.812:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=919 comm="apparmor_parser" [ 5.429249] audit: type=1400 audit(1505990388.812:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=919 comm="apparmor_parser" [ 5.429250] audit: type=1400 audit(1505990388.812:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=919 comm="apparmor_parser" [ 5.429279] audit: type=1400 audit(1505990388.812:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=924 comm="apparmor_parser" [ 5.435273] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 5.435890] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.464414] EDAC amd64: DRAM ECC disabled. [ 5.464415] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 5.516343] EDAC amd64: DRAM ECC disabled. [ 5.516344] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 5.565396] tveeprom: Hauppauge model 165100, rev B4I6, serial# 4035976079 [ 5.565397] tveeprom: MAC address is 00:0d:fe:90:1b:8f [ 5.565398] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 5.565399] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 5.565400] tveeprom: audio processor is CX23888 (idx 40) [ 5.565401] tveeprom: decoder processor is CX23888 (idx 34) [ 5.565401] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 5.565402] cx23885: cx23885[0]: hauppauge eeprom: model=165100 [ 5.574314] cx25840 6-0044: cx23888 A/V decoder found @ 0x88 (cx23885[0]) [ 5.587124] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.587125] Bluetooth: BNEP filters: protocol multicast [ 5.587130] Bluetooth: BNEP socket layer initialized [ 6.000356] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:11:00.1/sound/card0/input12 [ 6.000424] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:11:00.1/sound/card0/input13 [ 6.124346] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready [ 6.150416] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready [ 6.153197] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 6.155272] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.155453] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.190033] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.190215] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.210652] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 6.223763] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.223962] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.246925] cx25840 6-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 6.257919] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.258101] iwlwifi 0000:09:00.0: L1 Disabled - LTR Disabled [ 6.270622] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 6.332117] cx23885: cx23885[0]: registered device video0 [v4l2] [ 6.332143] cx23885: cx23885[0]: registered device vbi0 [ 6.332220] cx23885: cx23885[0]: alsa: registered ALSA audio device [ 6.332221] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6.332222] cx23885: cx23885[0]: cx23885 based dvb card [ 6.332223] dvb_register(): board=57 port=1 [ 6.341717] si2157_probe: probing si2157 tuner fe=ffff8cbfd055b810 cfg=ffffab99420cf8a0 addr=0X60 [ 6.341718] si2157_setup_configuration: client=ffff8cbfd4598400 [ 6.341719] si2157_setup_configuration: dev= (null) [ 6.341720] si2157_attach (5-0060) [ 6.341721] si2157 5-0060: creating new instance [ 6.341721] si2157_attach: instance=1 [ 6.341722] si2157_attach(): new instance for tuner @0x60 [ 6.341722] si2157_setup_configuration: client=ffff8cbfd4598400 [ 6.341722] si2157_setup_configuration: dev=ffff8cbfd459c800 [ 6.341723] si2157_setup_configuration(0x60): dvb driver submitted configuration; port=1 invert=1 [ 6.341977] si2157 5-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 6.341984] dvb_register(): QUADHD_ATSC analog setup [ 6.341985] si2157_attach (5-0060) [ 6.341985] si2157 5-0060: attaching existing instance [ 6.341986] si2157_attach: instance=2 [ 6.341986] si2157_attach(): using existing instance for tuner @0x60 [ 6.341986] si2157_setup_configuration: client=ffff8cbfd4598400 [ 6.341987] si2157_setup_configuration: dev=ffff8cbfd459c800 [ 6.341987] si2157_setup_configuration(0x60): dvb driver submitted configuration; port=1 invert=1 [ 6.342241] dvbdev: DVB: registering new adapter (cx23885[0]) [ 6.342244] cx23885 0000:0c:00.0: DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)... [ 6.342401] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 6.342402] cx23885: cx23885[0]: cx23885 based dvb card [ 6.342403] dvb_register(): board=57 port=2 [ 6.349463] si2157_probe: probing si2157 tuner fe=ffff8cbfd35d6010 cfg=ffffab99420cf8a0 addr=0X62 [ 6.349463] si2157_setup_configuration: client=ffff8cbfcc594000 [ 6.349464] si2157_setup_configuration: dev= (null) [ 6.349467] si2157_attach (5-0062) [ 6.349468] si2157 5-0062: creating new instance [ 6.349469] si2157_attach: instance=1 [ 6.349469] si2157_attach(): new instance for tuner @0x62 [ 6.349470] si2157_setup_configuration: client=ffff8cbfcc594000 [ 6.349470] si2157_setup_configuration: dev=ffff8cbfcdb05800 [ 6.349471] si2157_setup_configuration(0x62): dvb driver submitted configuration; port=1 invert=1 [ 6.349726] si2157 5-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 6.349735] dvbdev: DVB: registering new adapter (cx23885[0]) [ 6.349737] cx23885 0000:0c:00.0: DVB: registering adapter 1 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)... [ 6.349912] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xd0 [ 6.349916] cx23885: cx23885[0]/0: found at 0000:0c:00.0, rev: 4, irq: 229, latency: 0, mmio: 0xfd400000 [ 6.349966] cx23885 0000:0d:00.0: enabling device (0000 -> 0002) [ 6.350041] cx23885: CORE cx23885[1]: subsystem: 0070:6b18, board: Hauppauge WinTV-QuadHD-ATSC [card=57,autodetected] [ 6.486118] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 6.693645] tveeprom: Hauppauge model 165101, rev B4I6, serial# 4035976079 [ 6.693646] tveeprom: MAC address is 00:0d:fe:90:1b:8f [ 6.693647] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 6.693648] tveeprom: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) [ 6.693649] tveeprom: audio processor is CX23888 (idx 40) [ 6.693649] tveeprom: decoder processor is CX23888 (idx 34) [ 6.693650] tveeprom: has no radio [ 6.693650] cx23885: cx23885[1]: hauppauge eeprom: model=165101 [ 6.695862] cx25840 9-0044: cx23888 A/V decoder found @ 0x88 (cx23885[1]) [ 7.364590] cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) [ 7.448946] cx23885: cx23885[1]: registered device video1 [v4l2] [ 7.448972] cx23885: cx23885[1]: registered device vbi1 [ 7.449057] cx23885: cx23885[1]: alsa: registered ALSA audio device [ 7.449058] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 7.449059] cx23885: cx23885[1]: cx23885 based dvb card [ 7.449060] dvb_register(): board=57 port=1 [ 7.455936] si2157_probe: probing si2157 tuner fe=ffff8cbfcee80810 cfg=ffffab99420cf8a0 addr=0X60 [ 7.455937] si2157_setup_configuration: client=ffff8cbfd4672800 [ 7.455938] si2157_setup_configuration: dev= (null) [ 7.455942] si2157_attach (8-0060) [ 7.455943] si2157 8-0060: creating new instance [ 7.455944] si2157_attach: instance=1 [ 7.455944] si2157_attach(): new instance for tuner @0x60 [ 7.455945] si2157_setup_configuration: client=ffff8cbfd4672800 [ 7.455945] si2157_setup_configuration: dev=ffff8cbfd4673400 [ 7.455946] si2157_setup_configuration(0x60): dvb driver submitted configuration; port=1 invert=1 [ 7.456178] si2157 8-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 7.456187] dvb_register(): QUADHD_ATSC analog setup [ 7.456190] si2157_attach (8-0060) [ 7.456191] si2157 8-0060: attaching existing instance [ 7.456191] si2157_attach: instance=2 [ 7.456192] si2157_attach(): using existing instance for tuner @0x60 [ 7.456193] si2157_setup_configuration: client=ffff8cbfd4672800 [ 7.456193] si2157_setup_configuration: dev=ffff8cbfd4673400 [ 7.456194] si2157_setup_configuration(0x60): dvb driver submitted configuration; port=1 invert=1 [ 7.456449] dvbdev: DVB: registering new adapter (cx23885[1]) [ 7.456452] cx23885 0000:0d:00.0: DVB: registering adapter 2 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)... [ 7.456694] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 7.456695] cx23885: cx23885[1]: cx23885 based dvb card [ 7.456697] dvb_register(): board=57 port=2 [ 7.463398] si2157_probe: probing si2157 tuner fe=ffff8cbfcee87810 cfg=ffffab99420cf8a0 addr=0X62 [ 7.463399] si2157_setup_configuration: client=ffff8cbfcee9e000 [ 7.463399] si2157_setup_configuration: dev= (null) [ 7.463401] si2157_attach (8-0062) [ 7.463402] si2157 8-0062: creating new instance [ 7.463402] si2157_attach: instance=1 [ 7.463403] si2157_attach(): new instance for tuner @0x62 [ 7.463403] si2157_setup_configuration: client=ffff8cbfcee9e000 [ 7.463404] si2157_setup_configuration: dev=ffff8cbfcee9c800 [ 7.463404] si2157_setup_configuration(0x62): dvb driver submitted configuration; port=1 invert=1 [ 7.463659] si2157 8-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 7.463666] dvbdev: DVB: registering new adapter (cx23885[1]) [ 7.463667] cx23885 0000:0d:00.0: DVB: registering adapter 3 frontend 0 (LG Electronics LGDT3306A VSB/QAM Frontend)... [ 7.463840] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xd0 [ 7.463845] cx23885: cx23885[1]/0: found at 0000:0d:00.0, rev: 4, irq: 226, latency: 0, mmio: 0xfd200000 [ 7.836677] igb 0000:0e:00.0 enp14s0: igb: enp14s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 7.836952] IPv6: ADDRCONF(NETDEV_CHANGE): enp14s0: link becomes ready [ 8.282322] Bluetooth: RFCOMM TTY layer initialized [ 8.282328] Bluetooth: RFCOMM socket layer initialized [ 8.282333] Bluetooth: RFCOMM ver 1.11 [ 8.350603] cx23885: cx23885[0]/1: Audio risc op code error [ 8.350615] cx23885: cx23885[0]: TV Audio - dma channel status dump [ 8.350623] cx23885: cx23885[0]: cmds: init risc lo : 0xff1da000 [ 8.350631] cx23885: cx23885[0]: cmds: init risc hi : 0x00000000 [ 8.350638] cx23885: cx23885[0]: cmds: cdt base : 0x00010930 [ 8.350646] cx23885: cx23885[0]: cmds: cdt size : 0x00000008 [ 8.350653] cx23885: cx23885[0]: cmds: iq base : 0x000106b0 [ 8.350660] cx23885: cx23885[0]: cmds: iq size : 0x00000010 [ 8.350667] cx23885: cx23885[0]: cmds: risc pc lo : 0xff1da010 [ 8.350674] cx23885: cx23885[0]: cmds: risc pc hi : 0x00000000 [ 8.350681] cx23885: cx23885[0]: cmds: iq wr ptr : 0x000041b0 [ 8.350688] cx23885: cx23885[0]: cmds: iq rd ptr : 0x000041ac [ 8.350695] cx23885: cx23885[0]: cmds: cdt current : 0x00000000 [ 8.350702] cx23885: cx23885[0]: cmds: pci target lo : 0x00000000 [ 8.350709] cx23885: cx23885[0]: cmds: pci target hi : 0x00000000 [ 8.350716] cx23885: cx23885[0]: cmds: line / byte : 0x00000000

[ 8.350725] 0x00000000 [ INVALID count=0 ]

[ 8.350732] 0x00000000 [ INVALID count=0 ]

[ 8.350740] 0x00000000 [ INVALID count=0 ]

[ 8.350748] 0x00000000 [ INVALID count=0 ] [ 8.350756] cx23885: cx23885[0]: (0x000106b0) iq 0: [ 8.350756] 0x9736315d [ read eol irq2 irq1 21 20 18 cnt1 13 12 count=349 ] [ 8.350765] cx23885: cx23885[0]: (0x000106b4) iq 1: [ 8.350766] 0xac894797 [ readc sol eol 23 19 cnt0 14 count=1943 ] [ 8.350774] cx23885: cx23885[0]: (0x000106b8) iq 2: [ 8.350774] 0x04a41a27 [ INVALID eol 23 21 18 12 count=2599 ] [ 8.350782] cx23885: cx23885[0]: (0x000106bc) iq 3: [ 8.350783] 0x44ec6e23 [ INVALID eol 23 22 21 19 18 14 13 count=3619 ] [ 8.350791] cx23885: cx23885[0]: (0x000106c0) iq 4: [ 8.350792] 0x3ac8d304 [ INVALID sol irq2 23 22 19 resync 14 12 count=772 ] [ 8.350800] cx23885: cx23885[0]: (0x000106c4) iq 5: [ 8.350800] 0x8993cfe3 [ sync sol irq1 23 20 cnt1 cnt0 resync 14 count=4067 ] [ 8.350809] cx23885: cx23885[0]: (0x000106c8) iq 6: [ 8.350810] 0xdb793e00 [ writecr sol irq2 irq1 22 21 20 19 cnt0 13 12 count=3584 ] [ 8.350819] cx23885: cx23885[0]: iq 7: 0xad350908 [ arg #1 ] [ 8.350826] cx23885: cx23885[0]: iq 8: 0xbb4aad06 [ arg #2 ] [ 8.350833] cx23885: cx23885[0]: iq 9: 0xf5e05296 [ arg #3 ] [ 8.350840] cx23885: cx23885[0]: (0x000106d8) iq a: [ 8.350840] 0x3f278038 [ INVALID sol eol irq2 irq1 21 18 cnt1 cnt0 resync count=56 ] [ 8.350849] cx23885: cx23885[0]: (0x000106dc) iq b: [ 8.350850] 0x63c57b34 [ INVALID irq2 irq1 23 22 18 cnt0 14 13 12 count=2868 ] [ 8.350858] cx23885: cx23885[0]: (0x000106e0) iq c: [ 8.350858] 0xc6c9f675 [ writecm eol irq2 23 22 19 cnt0 resync 14 13 12 count=1653 ] [ 8.350867] cx23885: cx23885[0]: iq d: 0x765777ea [ arg #1 ] [ 8.350875] cx23885: cx23885[0]: iq e: 0xf0fab3a1 [ arg #2 ] [ 8.350882] cx23885: cx23885[0]: (0x000106ec) iq f: [ 8.350882] 0xb11889f3 [ writerm irq1 20 19 resync count=2547 ] [ 8.350890] cx23885: cx23885[0]: iq 10: 0xb504245e [ arg #1 ] [ 8.350897] cx23885: cx23885[0]: iq 11: 0xe7170cb2 [ arg #2 ] [ 8.350898] cx23885: cx23885[0]: fifo: 0x00007000 -> 0x8000 [ 8.350898] cx23885: cx23885[0]: ctrl: 0x000106b0 -> 0x10710 [ 8.350905] cx23885: cx23885[0]: ptr1_reg: 0x000073a0 [ 8.350912] cx23885: cx23885[0]: ptr2_reg: 0x00010938 [ 8.350919] cx23885: cx23885[0]: cnt1_reg: 0x00000074 [ 8.350926] cx23885: cx23885[0]: cnt2_reg: 0x00000007 [ 8.370689] cx23885: cx23885[1]/1: Audio risc op code error [ 8.370693] cx23885: cx23885[1]: TV Audio - dma channel status dump [ 8.370697] cx23885: cx23885[1]: cmds: init risc lo : 0xff1d8000 [ 8.370701] cx23885: cx23885[1]: cmds: init risc hi : 0x00000000 [ 8.370704] cx23885: cx23885[1]: cmds: cdt base : 0x00010930 [ 8.370708] cx23885: cx23885[1]: cmds: cdt size : 0x00000008 [ 8.370711] cx23885: cx23885[1]: cmds: iq base : 0x000106b0 [ 8.370714] cx23885: cx23885[1]: cmds: iq size : 0x00000010 [ 8.370718] cx23885: cx23885[1]: cmds: risc pc lo : 0xff1d8014 [ 8.370721] cx23885: cx23885[1]: cmds: risc pc hi : 0x00000000 [ 8.370725] cx23885: cx23885[1]: cmds: iq wr ptr : 0x000041b1 [ 8.370728] cx23885: cx23885[1]: cmds: iq rd ptr : 0x000041ac [ 8.370731] cx23885: cx23885[1]: cmds: cdt current : 0x00000000 [ 8.370735] cx23885: cx23885[1]: cmds: pci target lo : 0x00000000 [ 8.370738] cx23885: cx23885[1]: cmds: pci target hi : 0x00000000 [ 8.370741] cx23885: cx23885[1]: cmds: line / byte : 0x00000000

[ 8.370746] 0x00000000 [ INVALID count=0 ]

[ 8.370750] 0x00000000 [ INVALID count=0 ]

[ 8.370754] 0x00000000 [ INVALID count=0 ]

[ 8.370758] 0x00000000 [ INVALID count=0 ] [ 8.370761] cx23885: cx23885[1]: (0x000106b0) iq 0: [ 8.370762] 0x9f03cd04 [ read sol eol irq2 irq1 cnt1 cnt0 resync 14 count=3332 ] [ 8.370767] cx23885: cx23885[1]: (0x000106b4) iq 1: [ 8.370768] 0x272d1411 [ skip eol irq2 irq1 21 19 18 cnt0 12 count=1041 ] [ 8.370773] cx23885: cx23885[1]: (0x000106b8) iq 2: [ 8.370773] 0x9b9112bb [ read sol irq2 irq1 23 20 cnt0 12 count=699 ] [ 8.370778] cx23885: cx23885[1]: (0x000106bc) iq 3: [ 8.370778] 0x22459c02 [ skip irq2 22 18 cnt0 resync 12 count=3074 ] [ 8.370783] cx23885: cx23885[1]: (0x000106c0) iq 4: [ 8.370783] 0x37d539e5 [ INVALID eol irq2 irq1 23 22 20 18 cnt0 13 12 count=2533 ] [ 8.370788] cx23885: cx23885[1]: (0x000106c4) iq 5: [ 8.370789] 0x1c3e1b67 [ write sol eol 21 20 19 18 cnt1 12 count=2919 ] [ 8.370794] cx23885: cx23885[1]: iq 6: 0x361d1d45 [ arg #1 ] [ 8.370797] cx23885: cx23885[1]: iq 7: 0x3f8c827a [ arg #2 ] [ 8.370801] cx23885: cx23885[1]: (0x000106d0) iq 8: [ 8.370801] 0x4c0a5d13 [ INVALID sol eol 19 cnt1 14 12 count=3347 ] [ 8.370806] cx23885: cx23885[1]: (0x000106d4) iq 9: [ 8.370806] 0x6f5e8c9a [ INVALID sol eol irq2 irq1 22 20 19 18 cnt1 resync count=3226 ] [ 8.370811] cx23885: cx23885[1]: (0x000106d8) iq a: [ 8.370812] 0xd3a02513 [ writecr irq2 irq1 23 21 13 count=1299 ] [ 8.370816] cx23885: cx23885[1]: iq b: 0xf6a9cdca [ arg #1 ] [ 8.370820] cx23885: cx23885[1]: iq c: 0x3707fafa [ arg #2 ] [ 8.370823] cx23885: cx23885[1]: iq d: 0x097d35b3 [ arg #3 ] [ 8.370826] cx23885: cx23885[1]: (0x000106e8) iq e: [ 8.370827] 0xb56d421b [ writerm eol irq1 22 21 19 18 cnt0 14 count=539 ] [ 8.370832] cx23885: cx23885[1]: iq f: 0x2ba4c355 [ arg #1 ] [ 8.370835] cx23885: cx23885[1]: iq 10: 0x67da4595 [ arg #2 ] [ 8.370836] cx23885: cx23885[1]: fifo: 0x00007000 -> 0x8000 [ 8.370836] cx23885: cx23885[1]: ctrl: 0x000106b0 -> 0x10710 [ 8.370840] cx23885: cx23885[1]: ptr1_reg: 0x00007360 [ 8.370843] cx23885: cx23885[1]: ptr2_reg: 0x00010938 [ 8.370846] cx23885: cx23885[1]: cnt1_reg: 0x0000006c [ 8.370850] cx23885: cx23885[1]: cnt2_reg: 0x00000007 [ 13.066053] cx23885: cx23885[0]/1: Audio risc op code error [ 13.066058] cx23885: cx23885[0]: TV Audio - dma channel status dump [ 13.066062] cx23885: cx23885[0]: cmds: init risc lo : 0xff9d2000 [ 13.066066] cx23885: cx23885[0]: cmds: init risc hi : 0x00000000 [ 13.066069] cx23885: cx23885[0]: cmds: cdt base : 0x00010930 [ 13.066073] cx23885: cx23885[0]: cmds: cdt size : 0x00000008 [ 13.066077] cx23885: cx23885[0]: cmds: iq base : 0x000106b0 [ 13.066080] cx23885: cx23885[0]: cmds: iq size : 0x00000010 [ 13.066084] cx23885: cx23885[0]: cmds: risc pc lo : 0xff9d2010 [ 13.066087] cx23885: cx23885[0]: cmds: risc pc hi : 0x00000000 [ 13.066091] cx23885: cx23885[0]: cmds: iq wr ptr : 0x000041b0 [ 13.066094] cx23885: cx23885[0]: cmds: iq rd ptr : 0x000041ac [ 13.066097] cx23885: cx23885[0]: cmds: cdt current : 0x00000000 [ 13.066101] cx23885: cx23885[0]: cmds: pci target lo : 0x00000000 [ 13.066104] cx23885: cx23885[0]: cmds: pci target hi : 0x00000000 [ 13.066108] cx23885: cx23885[0]: cmds: line / byte : 0x00000000

[ 13.066112] 0x00000000 [ INVALID count=0 ]

[ 13.066117] 0x00000000 [ INVALID count=0 ]

[ 13.066121] 0x00000000 [ INVALID count=0 ]

[ 13.066125] 0x00000000 [ INVALID count=0 ] [ 13.066129] cx23885: cx23885[0]: (0x000106b0) iq 0: [ 13.066130] 0x9736315d [ read eol irq2 irq1 21 20 18 cnt1 13 12 count=349 ] [ 13.066136] cx23885: cx23885[0]: (0x000106b4) iq 1: [ 13.066136] 0xac894797 [ readc sol eol 23 19 cnt0 14 count=1943 ] [ 13.066140] cx23885: cx23885[0]: (0x000106b8) iq 2: [ 13.066141] 0x04a41a27 [ INVALID eol 23 21 18 12 count=2599 ] [ 13.066145] cx23885: cx23885[0]: (0x000106bc) iq 3: [ 13.066145] 0x44ec6e23 [ INVALID eol 23 22 21 19 18 14 13 count=3619 ] [ 13.066150] cx23885: cx23885[0]: (0x000106c0) iq 4: [ 13.066150] 0x3ac8d304 [ INVALID sol irq2 23 22 19 resync 14 12 count=772 ] [ 13.066154] cx23885: cx23885[0]: (0x000106c4) iq 5: [ 13.066155] 0x8993cfe3 [ sync sol irq1 23 20 cnt1 cnt0 resync 14 count=4067 ] [ 13.066159] cx23885: cx23885[0]: (0x000106c8) iq 6: [ 13.066160] 0xdb793e00 [ writecr sol irq2 irq1 22 21 20 19 cnt0 13 12 count=3584 ] [ 13.066164] cx23885: cx23885[0]: iq 7: 0xad350908 [ arg #1 ] [ 13.066168] cx23885: cx23885[0]: iq 8: 0xbb4aad06 [ arg #2 ] [ 13.066171] cx23885: cx23885[0]: iq 9: 0xf5e05296 [ arg #3 ] [ 13.066174] cx23885: cx23885[0]: (0x000106d8) iq a: [ 13.066175] 0x3f278038 [ INVALID sol eol irq2 irq1 21 18 cnt1 cnt0 resync count=56 ] [ 13.066180] cx23885: cx23885[0]: (0x000106dc) iq b: [ 13.066180] 0x63c57b34 [ INVALID irq2 irq1 23 22 18 cnt0 14 13 12 count=2868 ] [ 13.066186] cx23885: cx23885[0]: (0x000106e0) iq c: [ 13.066186] 0xc6c9f675 [ writecm eol irq2 23 22 19 cnt0 resync 14 13 12 count=1653 ] [ 13.066192] cx23885: cx23885[0]: iq d: 0x765777ea [ arg #1 ] [ 13.066196] cx23885: cx23885[0]: iq e: 0xf0fab3a1 [ arg #2 ] [ 13.066199] cx23885: cx23885[0]: (0x000106ec) iq f: [ 13.066200] 0xb11889f3 [ writerm irq1 20 19 resync count=2547 ] [ 13.066205] cx23885: cx23885[0]: iq 10: 0xb504245e [ arg #1 ] [ 13.066208] cx23885: cx23885[0]: iq 11: 0xe7170cb2 [ arg #2 ] [ 13.066209] cx23885: cx23885[0]: fifo: 0x00007000 -> 0x8000 [ 13.066209] cx23885: cx23885[0]: ctrl: 0x000106b0 -> 0x10710 [ 13.066213] cx23885: cx23885[0]: ptr1_reg: 0x000073d0 [ 13.066217] cx23885: cx23885[0]: ptr2_reg: 0x00010938 [ 13.066220] cx23885: cx23885[0]: cnt1_reg: 0x0000007a [ 13.066223] cx23885: cx23885[0]: cnt2_reg: 0x00000007 [ 13.084030] cx23885: cx23885[1]/1: Audio risc op code error [ 13.084036] cx23885: cx23885[1]: TV Audio - dma channel status dump [ 13.084042] cx23885: cx23885[1]: cmds: init risc lo : 0xff05e000 [ 13.084048] cx23885: cx23885[1]: cmds: init risc hi : 0x00000000 [ 13.084052] cx23885: cx23885[1]: cmds: cdt base : 0x00010930 [ 13.084056] cx23885: cx23885[1]: cmds: cdt size : 0x00000008 [ 13.084059] cx23885: cx23885[1]: cmds: iq base : 0x000106b0 [ 13.084589] cx23885: cx23885[1]: cmds: iq size : 0x00000010 [ 13.084593] cx23885: cx23885[1]: cmds: risc pc lo : 0xff05e014 [ 13.084596] cx23885: cx23885[1]: cmds: risc pc hi : 0x00000000 [ 13.084600] cx23885: cx23885[1]: cmds: iq wr ptr : 0x000041b1 [ 13.084603] cx23885: cx23885[1]: cmds: iq rd ptr : 0x000041ac [ 13.084607] cx23885: cx23885[1]: cmds: cdt current : 0x00000000 [ 13.084611] cx23885: cx23885[1]: cmds: pci target lo : 0x00000000 [ 13.084614] cx23885: cx23885[1]: cmds: pci target hi : 0x00000000 [ 13.084618] cx23885: cx23885[1]: cmds: line / byte : 0x00000000

[ 13.084623] 0x00000000 [ INVALID count=0 ]

[ 13.084627] 0x00000000 [ INVALID count=0 ]

[ 13.084632] 0x00000000 [ INVALID count=0 ]

[ 13.084636] 0x00000000 [ INVALID count=0 ] [ 13.084640] cx23885: cx23885[1]: (0x000106b0) iq 0: [ 13.084641] 0x9f03cd04 [ read sol eol irq2 irq1 cnt1 cnt0 resync 14 count=3332 ] [ 13.084648] cx23885: cx23885[1]: (0x000106b4) iq 1: [ 13.084648] 0x272d1411 [ skip eol irq2 irq1 21 19 18 cnt0 12 count=1041 ] [ 13.084655] cx23885: cx23885[1]: (0x000106b8) iq 2: [ 13.084655] 0x9b9112bb [ read sol irq2 irq1 23 20 cnt0 12 count=699 ] [ 13.084661] cx23885: cx23885[1]: (0x000106bc) iq 3: [ 13.084662] 0x22459c02 [ skip irq2 22 18 cnt0 resync 12 count=3074 ] [ 13.084667] cx23885: cx23885[1]: (0x000106c0) iq 4: [ 13.084668] 0x37d539e5 [ INVALID eol irq2 irq1 23 22 20 18 cnt0 13 12 count=2533 ] [ 13.084674] cx23885: cx23885[1]: (0x000106c4) iq 5: [ 13.084675] 0x1c3e1b67 [ write sol eol 21 20 19 18 cnt1 12 count=2919 ] [ 13.084681] cx23885: cx23885[1]: iq 6: 0x361d1d45 [ arg #1 ] [ 13.084685] cx23885: cx23885[1]: iq 7: 0x3f8c827a [ arg #2 ] [ 13.084689] cx23885: cx23885[1]: (0x000106d0) iq 8: [ 13.084689] 0x4c0a5d13 [ INVALID sol eol 19 cnt1 14 12 count=3347 ] [ 13.084695] cx23885: cx23885[1]: (0x000106d4) iq 9: [ 13.084695] 0x6f5e8c9a [ INVALID sol eol irq2 irq1 22 20 19 18 cnt1 resync count=3226 ] [ 13.084702] cx23885: cx23885[1]: (0x000106d8) iq a: [ 13.084702] 0xd3a02513 [ writecr irq2 irq1 23 21 13 count=1299 ] [ 13.084708] cx23885: cx23885[1]: iq b: 0xf6a9cdca [ arg #1 ] [ 13.084712] cx23885: cx23885[1]: iq c: 0x3707fafa [ arg #2 ] [ 13.084715] cx23885: cx23885[1]: iq d: 0x097d35b3 [ arg #3 ] [ 13.084719] cx23885: cx23885[1]: (0x000106e8) iq e: [ 13.084719] 0xb56d421b [ writerm eol irq1 22 21 19 18 cnt0 14 count=539 ] [ 13.084725] cx23885: cx23885[1]: iq f: 0x2ba4c355 [ arg #1 ] [ 13.084729] cx23885: cx23885[1]: iq 10: 0x67da4595 [ arg #2 ] [ 13.084730] cx23885: cx23885[1]: fifo: 0x00007000 -> 0x8000 [ 13.084730] cx23885: cx23885[1]: ctrl: 0x000106b0 -> 0x10710 [ 13.084734] cx23885: cx23885[1]: ptr1_reg: 0x000073f8 [ 13.084737] cx23885: cx23885[1]: ptr2_reg: 0x00010938 [ 13.084741] cx23885: cx23885[1]: cnt1_reg: 0x0000007f [ 13.084744] cx23885: cx23885[1]: cnt2_reg: 0x00000007 [ 24.145305] cx23885: cx23885[1]/1: Audio risc op code error [ 24.145310] cx23885: cx23885[1]: TV Audio - dma channel status dump [ 24.145315] cx23885: cx23885[1]: cmds: init risc lo : 0xff654000 [ 24.145318] cx23885: cx23885[1]: cmds: init risc hi : 0x00000000 [ 24.145322] cx23885: cx23885[1]: cmds: cdt base : 0x00010930 [ 24.145325] cx23885: cx23885[1]: cmds: cdt size : 0x00000008 [ 24.145329] cx23885: cx23885[1]: cmds: iq base : 0x000106b0 [ 24.145332] cx23885: cx23885[1]: cmds: iq size : 0x00000010 [ 24.145335] cx23885: cx23885[1]: cmds: risc pc lo : 0xff654014 [ 24.145339] cx23885: cx23885[1]: cmds: risc pc hi : 0x00000000 [ 24.145342] cx23885: cx23885[1]: cmds: iq wr ptr : 0x000041b1 [ 24.145345] cx23885: cx23885[1]: cmds: iq rd ptr : 0x000041ac [ 24.145348] cx23885: cx23885[1]: cmds: cdt current : 0x00000000 [ 24.145352] cx23885: cx23885[1]: cmds: pci target lo : 0x00000000 [ 24.145355] cx23885: cx23885[1]: cmds: pci target hi : 0x00000000 [ 24.145362] cx23885: cx23885[1]: cmds: line / byte : 0x00000000

[ 24.145370] 0x00000000 [ INVALID count=0 ]

[ 24.145378] 0x00000000 [ INVALID count=0 ]

[ 24.145385] 0x00000000 [ INVALID count=0 ]

[ 24.145393] 0x00000000 [ INVALID count=0 ] [ 24.145400] cx23885: cx23885[1]: (0x000106b0) iq 0: [ 24.145400] 0x9f03cd04 [ read sol eol irq2 irq1 cnt1 cnt0 resync 14 count=3332 ] [ 24.145410] cx23885: cx23885[1]: (0x000106b4) iq 1: [ 24.145410] 0x272d1411 [ skip eol irq2 irq1 21 19 18 cnt0 12 count=1041 ] [ 24.145418] cx23885: cx23885[1]: (0x000106b8) iq 2: [ 24.145419] 0x9b9112bb [ read sol irq2 irq1 23 20 cnt0 12 count=699 ] [ 24.145427] cx23885: cx23885[1]: (0x000106bc) iq 3: [ 24.145428] 0x22459c02 [ skip irq2 22 18 cnt0 resync 12 count=3074 ] [ 24.145436] cx23885: cx23885[1]: (0x000106c0) iq 4: [ 24.145436] 0x37d539e5 [ INVALID eol irq2 irq1 23 22 20 18 cnt0 13 12 count=2533 ] [ 24.145445] cx23885: cx23885[1]: (0x000106c4) iq 5: [ 24.145445] 0x1c3e1b67 [ write sol eol 21 20 19 18 cnt1 12 count=2919 ] [ 24.145454] cx23885: cx23885[1]: iq 6: 0x361d1d45 [ arg #1 ] [ 24.145461] cx23885: cx23885[1]: iq 7: 0x3f8c827a [ arg #2 ] [ 24.145468] cx23885: cx23885[1]: (0x000106d0) iq 8: [ 24.145468] 0x4c0a5d13 [ INVALID sol eol 19 cnt1 14 12 count=3347 ] [ 24.145476] cx23885: cx23885[1]: (0x000106d4) iq 9: [ 24.145477] 0x6f5e8c9a [ INVALID sol eol irq2 irq1 22 20 19 18 cnt1 resync count=3226 ] [ 24.145486] cx23885: cx23885[1]: (0x000106d8) iq a: [ 24.145486] 0xd3a02513 [ writecr irq2 irq1 23 21 13 count=1299 ] [ 24.145494] cx23885: cx23885[1]: iq b: 0xf6a9cdca [ arg #1 ] [ 24.145501] cx23885: cx23885[1]: iq c: 0x3707fafa [ arg #2 ] [ 24.145508] cx23885: cx23885[1]: iq d: 0x097d35b3 [ arg #3 ] [ 24.145515] cx23885: cx23885[1]: (0x000106e8) iq e: [ 24.145516] 0xb56d421b [ writerm eol irq1 22 21 19 18 cnt0 14 count=539 ] [ 24.145524] cx23885: cx23885[1]: iq f: 0x2ba4c355 [ arg #1 ] [ 24.145531] cx23885: cx23885[1]: iq 10: 0x67da4595 [ arg #2 ] [ 24.145532] cx23885: cx23885[1]: fifo: 0x00007000 -> 0x8000 [ 24.145532] cx23885: cx23885[1]: ctrl: 0x000106b0 -> 0x10710 [ 24.145539] cx23885: cx23885[1]: ptr1_reg: 0x000073c8 [ 24.145546] cx23885: cx23885[1]: ptr2_reg: 0x00010938 [ 24.145553] cx23885: cx23885[1]: cnt1_reg: 0x00000079 [ 24.145560] cx23885: cx23885[1]: cnt2_reg: 0x00000007 [ 328.356695] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 643.407836] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 958.456787] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 1273.511794] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 1588.568008] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 1903.621673] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 2218.669025] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 2533.714965] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 2848.764943] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 3163.814559] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 3478.864432] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 3793.912645] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 4108.965231] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 4424.012820] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 4739.056909] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 5054.102947] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 5369.162307] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 5684.212346] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 5999.259894] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 6314.308331] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 6629.358328] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 6944.408293] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 7259.457967] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 7574.507699] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 7889.557542] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 8204.604303] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 8523.643714] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 8838.690689] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 9154.740309] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 9469.786562] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [ 9784.831815] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [10099.882017] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [10414.938760] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [10729.992308] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [11045.044986] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [11360.096134] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [11675.147356] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [11990.197625] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [12305.246399] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [12620.294761] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [12935.344353] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [13250.395387] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [13565.441253] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [13880.494271] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [14195.544023] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [14510.589737] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [14825.634203] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [15140.678899] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [15455.725777] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [15770.773770] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [16085.821695] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [16400.870491] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [16715.928399] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [17030.984247] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [17346.035647] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [17661.081103] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [17976.137211] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [18291.185807] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [18606.233056] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [18921.276705] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [19236.321551] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [19551.367384] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [19866.409299] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [20181.461188] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [20496.509823] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [20811.563319] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [21126.612375] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [21441.662400] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [21756.702724] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [22071.760488] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [22386.809554] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [22701.864560] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [23016.922386] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [23331.975350] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [23647.030386] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [23962.080134] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [24277.134769] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [24592.185702] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [24907.225483] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [25222.269395] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [25537.315501] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [25852.363552] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [26167.412677] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [26482.461223] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [26797.509223] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [27112.559277] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [27427.605827] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [27742.655261] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [28057.705990] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [28372.755169] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [28687.804550] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [29002.861320] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [29317.915254] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [29632.965765] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [29948.015395] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [30263.067891] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [30578.116390] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [30893.164639] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [31208.207152] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [31523.246258] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [31838.299323] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [32153.342587] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [32468.393983] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [32783.439427] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [33098.494127] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [33413.535607] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [33728.586730] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [34043.642988] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [34358.689727] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [34673.740732] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [34988.795471] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [35303.856486] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [35618.915080] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [35933.969280] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [36249.023569] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [36564.075410] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [36879.125685] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [37194.166769] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [37509.210352] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [37824.256746] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [38139.305650] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [38454.354616] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [38769.403023] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [39084.450156] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [39399.493044] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [39714.538816] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [40029.585544] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [40344.635034] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [40659.684191] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [40974.732886] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready [41289.784290] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready

Leigh

b-rad-NDi commented 7 years ago

Hi,

Could you paste the dmesg log that are generated when you try and run a Plex scan? This will show you your current time spot:

dmesg | tail

I would like everything that shows up after that.

vandammages commented 7 years ago

i seems my issue is with the way VMware passes the USB controller to ubuntu ..work fine in windows If I add a hardware USB controller card. and pass it trough to ubuntu VM all works fine.

so issue is VMware and USB passthrough on Ubuntu. with default onboard controllers.

Thanks

On Fri, Sep 22, 2017 at 1:48 PM, Brad Love notifications@github.com wrote:

Hi,

Could you paste the dmesg log that are generated when you try and run a Plex scan? This will show you your current time spot:

dmesg | tail

I would like everything that shows up after that.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/b-rad-NDi/Ubuntu-media-tree-kernel-builder/issues/14#issuecomment-331515848, or mute the thread https://github.com/notifications/unsubscribe-auth/AGNVoVgTshf7T91waaHRf0VQoa4Fx9DVks5sk_L9gaJpZM4PgQ8i .

leigh-richardson commented 7 years ago

Hi Brad, I'm so sorry to waste your time, I've just realised the stupidest thing. I've been sold the wrong format tuner card for Australia. The shop stocks both and they sent me the wrong one.

Thanks for your prompt follow up.

Regards,

Leigh Richardson National Sales Manager

[http://files.ordermatepos.com/email-signature/ordermate-logo.gif]http://www.ordermate.com.au/

OrderMate POS Level 6 / 69 Reservoir St, Surry Hills, NSW 2010 Tel: 1300 667 067<tel:1300%20667%20067> | Fax: 1300 667 101<tel:1300%20667%20101> | Mob: +61 447 554 446<tel:+61%20447%20554%20446> | Web: www.ordermate.com.auhttp://www.ordermate.com.au/

On 23 Sep 2017, at 3:49 am, Brad Love notifications@github.com<mailto:notifications@github.com> wrote:

Hi,

Could you paste the dmesg log that are generated when you try and run a Plex scan? This will show you your current time spot:

dmesg | tail

I would like everything that shows up after that.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/b-rad-NDi/Ubuntu-media-tree-kernel-builder/issues/14#issuecomment-331515848, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AesmGjI1idVuMvq549pEWbFbOR9X07BGks5sk_L-gaJpZM4PgQ8i.


This email has been scanned by LANserve Email Defence. For more information please visit www.emergingit.com.auhttp://www.emergingit.com.au/


Report this message as spamhttps://console.mailguard.com.au/ras/1RJaXJeXC3/6LzvkZELSmkMc4fU31oEPn/3.3

--


This email has been scanned by LANserve Email Defence. For more information please visit www.emergingit.com.au


b-rad-NDi commented 7 years ago

oops :)

Saentist commented 6 years ago

I have same problem with correct device. I hope cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB [card=56,autodetected] (56 | Hauppauge WinTV-QuadHD-DVB | 0070:6a28, 0070:6b28)

dmesg |grep si2 [ 15.423656] si2168 5-0064: Silicon Labs Si2168-B40 successfully identified [ 15.423657] si2168 5-0064: firmware version: B 4.0.2 [ 15.550144] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 15.556503] si2168 5-0066: Silicon Labs Si2168-B40 successfully identified [ 15.556504] si2168 5-0066: firmware version: B 4.0.2 [ 15.557836] si2157 6-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 15.906135] si2168 10-0064: Silicon Labs Si2168-B40 successfully identified [ 15.906136] si2168 10-0064: firmware version: B 4.0.2 [ 15.907470] si2157 11-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 15.914310] si2168 10-0066: Silicon Labs Si2168-B40 successfully identified [ 15.914311] si2168 10-0066: firmware version: B 4.0.2 [ 15.917898] si2157 11-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 22.979202] si2168 10-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 23.590260] si2168 10-0066: firmware version: B 4.0.11 [ 23.596547] si2157 11-0062: found a 'Silicon Labs Si2157-A30' [ 23.645326] si2157 11-0062: firmware version: 3.0.5 [ 23.652146] si2168 10-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 24.257463] si2168 10-0064: firmware version: B 4.0.11 [ 24.263755] si2157 11-0060: found a 'Silicon Labs Si2157-A30' [ 24.312752] si2157 11-0060: firmware version: 3.0.5 [ 24.317277] si2168 5-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 24.922612] si2168 5-0066: firmware version: B 4.0.11 [ 24.928898] si2157 6-0062: found a 'Silicon Labs Si2157-A30' [ 24.977426] si2157 6-0062: firmware version: 3.0.5 [ 24.984257] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 25.590301] si2168 5-0064: firmware version: B 4.0.11 [ 25.596598] si2157 6-0060: found a 'Silicon Labs Si2157-A30' [ 25.645388] si2157 6-0060: firmware version: 3.0.5 lspci `03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) Subsystem: Hauppauge computer works Inc. CX23885 PCI Video and Audio Decoder Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at ff400000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 2 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: cx23885 Kernel modules: cx23885

04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) Subsystem: Hauppauge computer works Inc. CX23885 PCI Video and Audio Decoder Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at ff200000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 2 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel Kernel driver in use: cx23885 Kernel modules: cx23885 ` tuner reported as Silicon Labs Si2168 I scan DVB-C

`w_scan -f c -F -t 3 -Q 2 -e 1 -v w_scan version 20141122 (compiled for DVB API 5.10) WARNING: could not guess your country. Falling back to 'DE' guessing country 'DE', use -c to override using settings for GERMANY DVB cable DVB-C scan type CABLE, channellist 7 output format vdr-2.0 WARNING: could not guess your codepage. Falling back to 'UTF-8' output charset 'UTF-8', use -C to override Info: using DVB adapter auto detection. check Silicon Labs Si2168: DVB-C ann.A DVB-T2 DVB-T /dev/dvb/adapter0/frontend0 -> CABLE "Silicon Labs Si2168": very good :-))

Using CABLE frontend (adapter /dev/dvb/adapter0/frontend0) ---- Getting frontend capabilities---- Using DVB API 5.10 frontend 'Silicon Labs Si2168' supports INVERSION_AUTO QAM_AUTO FECAUTO FREQ (42.00MHz ... 870.00MHz) SRATE (1.000MSym/s ... 7.200MSym/s) ----------------------- check Silicon Labs Si2168: DVB-C ann.A DVB-T2 DVB-T

322000: sr6900 (time: 00:58.563) sr6875 (time: 00:58.779) sr6957 (time: 00:59.035) (0.256sec): SC (0x3) (0.256sec) signal (0.412sec): (0x0) (0.520sec): SC (0x3) (0.572sec): (0x0)sr6956 (time: 00:59.711) (0.260sec): SC (0x3) (0.260sec) signal (0.416sec): (0x0) (0.520sec): SC (0x3) (0.572sec): (0x0)sr6952 (time: 01:00.395) sr6950 (time: 01:00.611) sr6790 (time: 01:00.819) (0.256sec): SC (0x3) (0.256sec) signal (0.416sec): (0x0)sr6811 (time: 01:01.495) (0.256sec): SC (0x3) (0.256sec) signal (0.416sec): (0x0) (0.676sec): SC (0x3)sr6250 (time: 01:02.175) sr6111 (time: 01:02.431) sr6086 (time: 01:02.695) sr5900 (time: 01:02.911) sr5483 (time: 01:03.167) sr5217 (time: 01:03.379) sr5156 (time: 01:03.635) sr5000 (time: 01:03.895) sr4000 (time: 01:04.155) sr3450 (time: 01:04.363) 330000: sr6900 (time: 01:04.619) sr6875 (time: 01:04.831) sr6957 (time: 01:05.039) (0.156sec): SCL (0x1F) (0.156sec) signal (0.156sec) lock signal ok: QAM_AUTO f = 330000 kHz S6957C999 (0:0:0) initial PAT lookup.. Info: no data from PAT after 6 seconds deleting (QAM_AUTO f = 330000 kHz S6957C999 (0:0:0)) 338000: sr6900 (time: 01:11.707) sr6875 (time: 01:11.963) sr6957 (time: 01:12.223) (0.156sec): SCL (0x1F) (0.156sec) signal (0.156sec) lock signal ok: QAM_AUTO f = 338000 kHz S6957C999 (0:0:0) initial PAT lookup.. Info: no data from PAT after 6 seconds deleting (QAM_AUTO f = 338000 kHz S6957C999 (0:0:0)) 346000: sr6900 (time: 01:18.691) sr6875 (time: 01:18.947) sr6957 (time: 01:19.155) (0.152sec): SCL (0x1F) (0.152sec) signal (0.152sec) lock signal ok: QAM_AUTO f = 346000 kHz S6957C999 (0:0:0) initial PAT lookup.. Info: no data from PAT after 6 seconds deleting (QAM_AUTO f = 346000 kHz S6957C999 (0:0:0)) 354000: sr6900 (time: 01:25.695) sr6875 (time: 01:25.903) sr6957 (time: 01:26.163) (0.104sec): SC (0x3) (0.104sec) signal (0.156sec): SCL (0x1F) (0.156sec) lock signal ok: QAM_AUTO f = 354000 kHz S6957C999 (0:0:0) initial PAT lookup.. Info: no data from PAT after 6 seconds deleting (QAM_AUTO f = 354000 kHz S6957C999 (0:0:0)) ....... ERROR: Sorry - i couldn't get any working frequency/transponder Nothing to scan!! MuMuDVB Version 2.1.0_20170408_mumudvb2 --- Build information --- Built with CAM support. Built with SCAM support. Built with ATSC support. Built with ATSC long channel names support. Built with support for DVB API Version 5.10. Built with support for DVB-T2.

Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004 Released under the GPL. Latest version available from http://mumudvb.net/ Project from the cr@ns (http://www.crans.org) by Brice DUBOST (mumudvb@braice.net)

Deb2: Main: ==== Configuration file ==== Deb2: Main: 001 freq=746000 Deb2: Main: 002 modulation=QAM64 Deb2: Main: 003 delivery_system=DVBC_ANNEX_AC Deb2: Main: 004 card=0 Deb2: Main: 005 srate=6875 Deb2: Main: 006 autoconfiguration=full Deb2: Main: 007 multicast_ipv4=0 Deb2: Main: 008 multicast_ipv6=0 Deb2: Main: 009 card=0 Deb2: Main: 010 store_eit=1 Deb2: Main: 011 sort_eit=1 Deb2: Main: 012 dont_send_scrambled=1 Deb2: Main: 013 filter_transport_error=1 Deb2: Main: 014 check_cc=1 Deb2: Main: 015 autoconf_radios=1 Deb2: Main: 016 unicast=1 Deb2: Main: 017 port_http=8005 Deb2: Main: 018 scam_support=1 Deb2: Main: 019 autoconf_scrambled=1 Deb2: Main: 020 ring_buffer_default_size=64535 Deb2: Main: 021 decsa_default_delay=500000 Deb2: Main: 022 send_default_delay=1500000 Deb2: Main: 023 #oscam=1 Deb2: Main: 024 Deb2: Main: ============ done =========== Info: Tune: You will use DVB API version 5 for tuning your card. ERRO: Tune: Card defined on the command line: 0, overrides conf file 0 Info: Rewrite: You have enabled the EIT (EPG) storage for webservices Info: Rewrite: You have enabled the EIT rewriting WARN: SCAM_COMMON: You have enabled the support for software descrambling (scrambled channels). Please report any bug/comment Deb1: SCAM_COMMON: Ring buffer default size set to 65536 Info: Main: Autoconfiguration, we activate SAP announces. if you want to disable them see the README. Info: Main: Autoconfiguration, we activate PAT rewriting. if you want to disable it see the README. Info: Main: Autoconfiguration, we activate SDT rewriting. if you want to disable it see the README. Info: Main: ========== End of configuration, MuMuDVB version 2.1.0_20170408_mumudvb2 is starting ========== WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter0_tuner0: No such file or directory WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter0_tuner0: No such file or directory Info: Main: Streaming. Freq 746000000 Info: Tune: Using DVB card "Silicon Labs Si2168" tuner 0 Info: Tune: tuning DVB-C to 746000000 Hz, srate=6875000 Info: Tune: Tuning With DVB-API version 5. delivery system : 1 Info: Tune: Stream_id = 0, stream id with PLS parameters 0 Deb0: Tune: polling.... Info: Tune: FE_STATUS: Deb0: Tune: polling.... Info: Tune: FE_STATUS: Info: Tune: FE_HAS_SIGNAL : found something above the noise level Info: Tune: FE_HAS_CARRIER : found a DVB signal Info: Tune: FE_HAS_VITERBI : FEC is stable Info: Tune: FE_HAS_SYNC : found sync bytes Info: Tune: FE_HAS_LOCK : everything's working... Info: Tune: Event: Frequency: 0 Info: Tune: SymbolRate: -102140612 Info: Tune: FEC_inner: 32642 Info: Main: Card 0, tuner 0 tuned main 0x7fffd3ff38f0 Deb1: SCAM_GETCW: Getcw thread started Info: Common chan: Looking through all services to update their filters Deb0: Common chan: Open the new filters Deb1: DVB: Setting filter for PID 0 WARN: DVB: An issue happened during the IOCTLS to take BER measurements error: Operation not supported Deb1: DVB: Setting filter for PID 1 Deb1: DVB: Setting filter for PID 16 Deb1: DVB: Setting filter for PID 17 Deb1: DVB: Setting filter for PID 18 Deb1: DVB: Setting filter for PID 20 Info: Unicast: We open the Master http socket for address 0.0.0.0:8005 Deb1: Unicast : unicast : unicast_vars->pfdsnum : 1 Info: Autoconf: Autoconfiguration is now ready to work for you ! WARN: DVB: An issue happened during the IOCTLS to take strength measurements error: Operation not supported WARN: DVB: An issue happened during the IOCTLS to take SNR measurements error: Operation not supported WARN: DVB: An issue happened during the IOCTLS to take uncorrected blocks measurements error: Operation not supported

femon -H -a 1 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 40% | snr 45% | ber 1869833334 | unc 1 |

no data from PAT or poll TIMEOUT SNR 38dB Signal -41dBm but no reception

b-rad-NDi commented 6 years ago

Please include dmesg.

If you have a DVB model, did you install the required firmware so the demod works?

If you are missing firmware, and using my ppa then: sudo apt-get install linux-firmware-hauppauge should fix you up.

Saentist commented 6 years ago

I use Ubuntu 16.04 server x64 standard kernel 4.4 no card recognized install PPA path kernel 4.4-somelongnumberstring card recognized no channels currently

uname -a
Linux tvserv2 4.10.0-42-generic #46~16.04.1-Ubuntu SMP Mon Dec 4 15:57:59 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

card recognied no channels but some strange errors appear in dmesg somtimes from cx23885

[ 0.000000] Linux version 4.10.0-42-generic (buildd@lgw01-amd64-007) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #46~16.04.1-Ubuntu SMP Mon Dec 4 15:57:59 UTC 2017 (Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=fe0308a0-b6a1-4825-817c-24a08016516e ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d76bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000009d76c000-0x000000009d7effff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009d7f0000-0x000000009d7fdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000009d7fe000-0x000000009d831fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000009d832000-0x00000000adb15fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000adb16000-0x00000000ae4ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ae4ec000-0x00000000ae4ecfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ae4ed000-0x00000000ae6f2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ae6f3000-0x00000000aeb31fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000aeb32000-0x00000000aeff2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000aeff3000-0x00000000aeffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000011effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq Pro 6305 SFF/1850, BIOS K06 v02.74 10/24/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000AF000000 mask FFFFFF000000 uncachable [ 0.000000] 3 base 0000B0000000 mask FFFFF0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] total RAM covered: 2800M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 4 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xaf000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4ce0-0x000f4cef] mapped at [ffff9422800f4ce0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff942280099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x65628000, 0x65628fff] PGTABLE [ 0.000000] BRK [0x65629000, 0x65629fff] PGTABLE [ 0.000000] BRK [0x6562a000, 0x6562afff] PGTABLE [ 0.000000] BRK [0x6562b000, 0x6562bfff] PGTABLE [ 0.000000] BRK [0x6562c000, 0x6562cfff] PGTABLE [ 0.000000] BRK [0x6562d000, 0x6562dfff] PGTABLE [ 0.000000] BRK [0x6562e000, 0x6562efff] PGTABLE [ 0.000000] BRK [0x6562f000, 0x6562ffff] PGTABLE [ 0.000000] BRK [0x65630000, 0x65630fff] PGTABLE [ 0.000000] BRK [0x65631000, 0x65631fff] PGTABLE [ 0.000000] BRK [0x65632000, 0x65632fff] PGTABLE [ 0.000000] BRK [0x65633000, 0x65633fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33528000-0x35a8bfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FE740 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x000000009D7F0088 000094 (v01 HPQOEM SLIC-BPC 10242016 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000009D7F6DC8 00010C (v05 HPQOEM SLIC-BPC 10242016 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658) [ 0.000000] ACPI: DSDT 0x000000009D7F01B0 006C17 (v02 HPQOEM SLIC-BPC 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000009D827080 000040 [ 0.000000] ACPI: APIC 0x000000009D7F6ED8 000072 (v03 HPQOEM SLIC-BPC 10242016 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000009D7F6F50 000044 (v01 HPQOEM SLIC-BPC 10242016 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000009D7F6F98 00003C (v01 HPQOEM SLIC-BPC 10242016 MSFT 00010013) [ 0.000000] ACPI: HPET 0x000000009D7F6FD8 000038 (v01 HPQOEM SLIC-BPC 10242016 AMI 00000005) [ 0.000000] ACPI: ASF! 0x000000009D7F7010 00006E (v32 HPQOEM SB700ASF 00000001 TFSM 000F4240) [ 0.000000] ACPI: SSDT 0x000000009D7F7080 005270 (v01 COMPAQ WMI 00000001 MSFT 03000001) [ 0.000000] ACPI: SLIC 0x000000009D7FC2F0 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: TCPA 0x000000009D7FC468 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.000000] ACPI: UEFI 0x000000009D7FC4A0 000042 (v01 HPQOEM SLIC-BPC 10242016 00000000) [ 0.000000] ACPI: IVRS 0x000000009D7FC4E8 000070 (v02 AMD ANNAPURN 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 0x000000009D7FC558 0006B2 (v01 AMD ANNAPURN 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x000000009D7FCC10 0004B7 (v02 AMD ANNAPURN 00000001 MSFT 04000000) [ 0.000000] ACPI: CRAT 0x000000009D7FD0C8 0001A8 (v01 AMD ANNAPURN 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11efd3000-0x11effdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000009d76bfff] [ 0.000000] node 0: [mem 0x000000009d832000-0x00000000adb15fff] [ 0.000000] node 0: [mem 0x00000000ae4ec000-0x00000000ae4ecfff] [ 0.000000] node 0: [mem 0x00000000ae6f3000-0x00000000aeb31fff] [ 0.000000] node 0: [mem 0x00000000aeff3000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x0000000100001000-0x000000011effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] [ 0.000000] On node 0 totalpages: 839226 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11067 pages used for memmap [ 0.000000] DMA32 zone: 708253 pages, LIFO batch:31 [ 0.000000] Normal zone: 1984 pages used for memmap [ 0.000000] Normal zone: 126975 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d76c000-0x9d7effff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d7f0000-0x9d7fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x9d7fe000-0x9d831fff] [ 0.000000] PM: Registered nosave memory: [mem 0xadb16000-0xae4ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0xae4ed000-0xae6f2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaeb32000-0xaeff2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff] [ 0.000000] e820: [mem 0xaf000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 36 pages/cpu @ffff94239ec00000 s107992 r8192 d31272 u524288 [ 0.000000] pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 826090 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=fe0308a0-b6a1-4825-817c-24a08016516e ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3177824K/3356904K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 179080K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:524544 nr_irqs:456 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3593.281 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.56 BogoMIPS (lpj=14373124) [ 0.000059] pid_max: default: 32768 minimum: 301 [ 0.000096] ACPI: Core revision 20160930 [ 0.003524] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.003580] Security Framework initialized [ 0.003610] Yama: becoming mindful. [ 0.003653] AppArmor: AppArmor initialized [ 0.003927] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005302] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.006008] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.006314] CPU: Physical Processor ID: 0 [ 0.006347] CPU: Processor Core ID: 0 [ 0.006377] mce: CPU supports 7 MCE banks [ 0.006424] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.006455] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.007153] Freeing SMP alternatives memory: 32K [ 0.027436] ftrace: allocating 34227 entries in 134 pages [ 0.041899] smpboot: Max logical packages: 2 [ 0.124933] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.271185] smpboot: CPU0: AMD A6-5400B APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1) [ 0.271320] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 4: b600000000070f0f [ 0.271354] mce: [Hardware Error]: TSC 0 ADDR ff590010 [ 0.271385] mce: [Hardware Error]: PROCESSOR 2:610f01 TIME 1517872830 SOCKET 0 APIC 0 microcode 6001119 [ 0.271425] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.271459] ... version: 0 [ 0.271489] ... bit width: 48 [ 0.271518] ... generic registers: 6 [ 0.271547] ... value mask: 0000ffffffffffff [ 0.271577] ... max period: 00007fffffffffff [ 0.271606] ... fixed-purpose events: 0 [ 0.271636] ... event mask: 000000000000003f [ 0.274670] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.274722] smp: Bringing up secondary CPUs ... [ 0.274848] x86: Booting SMP configuration: [ 0.274879] .... node #0, CPUs: #1 [ 0.277084] smp: Brought up 1 node, 2 CPUs [ 0.277148] smpboot: Total of 2 processors activated (14373.12 BogoMIPS) [ 0.277787] devtmpfs: initialized [ 0.277882] x86/mm: Memory block size: 128MB [ 0.280389] evm: security.selinux [ 0.280418] evm: security.SMACK64 [ 0.280447] evm: security.SMACK64EXEC [ 0.280476] evm: security.SMACK64TRANSMUTE [ 0.280506] evm: security.SMACK64MMAP [ 0.280535] evm: security.ima [ 0.280564] evm: security.capability [ 0.280637] PM: Registering ACPI NVS region [mem 0x9d76c000-0x9d7effff] (540672 bytes) [ 0.280680] PM: Registering ACPI NVS region [mem 0x9d7fe000-0x9d831fff] (212992 bytes) [ 0.280715] PM: Registering ACPI NVS region [mem 0xae4ed000-0xae6f2fff] (2121728 bytes) [ 0.280783] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.280867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.280908] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.280987] pinctrl core: initialized pinctrl subsystem [ 0.281123] RTC time: 23:20:30, date: 02/05/18 [ 0.281247] NET: Registered protocol family 16 [ 0.293133] cpuidle: using governor ladder [ 0.305132] cpuidle: using governor menu [ 0.305169] PCCT header not found. [ 0.305266] ACPI: bus type PCI registered [ 0.305297] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.305402] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.305438] PCI: not using MMCONFIG [ 0.305467] PCI: Using configuration type 1 for base access [ 0.305497] PCI: Using configuration type 1 for extended access [ 0.317322] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.317356] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.317659] ACPI: Added _OSI(Module Device) [ 0.317689] ACPI: Added _OSI(Processor Device) [ 0.317718] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.317748] ACPI: Added _OSI(Processor Aggregator Device) [ 0.317923] ACPI: Executed 1 blocks of module-level executable AML code [ 0.321260] ACPI: Interpreter enabled [ 0.321309] ACPI: (supports S0 S3 S4 S5) [ 0.321339] ACPI: Using IOAPIC for interrupt routing [ 0.321490] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.321557] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources [ 0.321596] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.327478] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.327516] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.327742] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.327786] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.328079] PCI host bridge to bus 0000:00 [ 0.328110] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.328141] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.328172] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.328203] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.328233] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.328267] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.328301] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window] [ 0.328335] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.328371] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000 [ 0.328467] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600 [ 0.328563] pci 0000:00:01.0: [1002:9991] type 00 class 0x030000 [ 0.328570] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] [ 0.328574] pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff] [ 0.328578] pci 0000:00:01.0: reg 0x18: [mem 0xff700000-0xff73ffff] [ 0.328609] pci 0000:00:01.0: supports D1 D2 [ 0.328671] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300 [ 0.328678] pci 0000:00:01.1: reg 0x10: [mem 0xff744000-0xff747fff] [ 0.328713] pci 0000:00:01.1: supports D1 D2 [ 0.328777] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400 [ 0.328812] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.328852] pci 0000:00:02.0: System wakeup disabled by ACPI [ 0.328937] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330 [ 0.328956] pci 0000:00:10.0: reg 0x10: [mem 0xff74a000-0xff74bfff 64bit] [ 0.329042] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.329092] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.329164] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330 [ 0.329183] pci 0000:00:10.1: reg 0x10: [mem 0xff748000-0xff749fff 64bit] [ 0.329270] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold [ 0.329318] pci 0000:00:10.1: System wakeup disabled by ACPI [ 0.329389] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.329401] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147] [ 0.329409] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133] [ 0.329416] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127] [ 0.329423] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113] [ 0.329430] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f] [ 0.329437] pci 0000:00:11.0: reg 0x24: [mem 0xff751000-0xff7517ff] [ 0.329535] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.329546] pci 0000:00:12.0: reg 0x10: [mem 0xff750000-0xff750fff] [ 0.329626] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.329692] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.329705] pci 0000:00:12.2: reg 0x10: [mem 0xff74f000-0xff74f0ff] [ 0.329768] pci 0000:00:12.2: supports D1 D2 [ 0.329769] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.329809] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.329876] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.329887] pci 0000:00:13.0: reg 0x10: [mem 0xff74e000-0xff74efff] [ 0.329968] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.330036] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.330049] pci 0000:00:13.2: reg 0x10: [mem 0xff74d000-0xff74d0ff] [ 0.330111] pci 0000:00:13.2: supports D1 D2 [ 0.330112] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.330151] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.330218] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.330330] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.330345] pci 0000:00:14.2: reg 0x10: [mem 0xff740000-0xff743fff 64bit] [ 0.330398] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.330436] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.330499] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.330616] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401 [ 0.330680] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.330744] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310 [ 0.330754] pci 0000:00:14.5: reg 0x10: [mem 0xff74c000-0xff74cfff] [ 0.330834] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.330902] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400 [ 0.330957] pci 0000:00:15.0: supports D1 D2 [ 0.330999] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.331066] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400 [ 0.331121] pci 0000:00:15.2: supports D1 D2 [ 0.331165] pci 0000:00:15.2: System wakeup disabled by ACPI [ 0.331235] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000 [ 0.331303] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000 [ 0.331368] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000 [ 0.331435] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000 [ 0.331507] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000 [ 0.331574] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000 [ 0.331688] pci 0000:01:00.0: [12d8:2304] type 01 class 0x060400 [ 0.331758] pci 0000:01:00.0: supports D1 D2 [ 0.331759] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331811] pci 0000:00:02.0: PCI bridge to [bus 01-04] [ 0.331845] pci 0000:00:02.0: bridge window [mem 0xff200000-0xff5fffff] [ 0.331892] pci 0000:02:01.0: [12d8:2304] type 01 class 0x060400 [ 0.331962] pci 0000:02:01.0: supports D1 D2 [ 0.331962] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332027] pci 0000:02:02.0: [12d8:2304] type 01 class 0x060400 [ 0.332096] pci 0000:02:02.0: supports D1 D2 [ 0.332097] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332172] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 0.332207] pci 0000:01:00.0: bridge window [mem 0xff200000-0xff5fffff] [ 0.332261] pci 0000:03:00.0: [14f1:8852] type 00 class 0x040000 [ 0.332291] pci 0000:03:00.0: reg 0x10: [mem 0xff400000-0xff5fffff 64bit] [ 0.332441] pci 0000:03:00.0: supports D1 D2 [ 0.332441] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot [ 0.332507] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.332550] pci 0000:02:01.0: PCI bridge to [bus 03] [ 0.332586] pci 0000:02:01.0: bridge window [mem 0xff400000-0xff5fffff] [ 0.332640] pci 0000:04:00.0: [14f1:8852] type 00 class 0x040000 [ 0.332669] pci 0000:04:00.0: reg 0x10: [mem 0xff200000-0xff3fffff 64bit] [ 0.332818] pci 0000:04:00.0: supports D1 D2 [ 0.332819] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot [ 0.332886] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.332927] pci 0000:02:02.0: PCI bridge to [bus 04] [ 0.332961] pci 0000:02:02.0: bridge window [mem 0xff200000-0xff3fffff] [ 0.333037] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 0.333074] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.333075] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.333076] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.333077] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.333078] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.333079] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.333080] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode) [ 0.333121] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.333221] pci 0000:07:00.0: [14e4:1681] type 00 class 0x020000 [ 0.333246] pci 0000:07:00.0: reg 0x10: [mem 0xff610000-0xff61ffff 64bit] [ 0.333263] pci 0000:07:00.0: reg 0x18: [mem 0xff600000-0xff60ffff 64bit] [ 0.333383] pci 0000:07:00.0: PME# supported from D3hot D3cold [ 0.333432] pci 0000:07:00.0: System wakeup disabled by ACPI [ 0.343279] pci 0000:00:15.2: PCI bridge to [bus 07] [ 0.343321] pci 0000:00:15.2: bridge window [mem 0xff600000-0xff6fffff] [ 0.343959] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344044] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344130] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344217] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344293] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344359] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344426] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344491] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) 0 [ 0.344908] SCSI subsystem initialized [ 0.344994] libata version 3.00 loaded. [ 0.345034] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.345066] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.345109] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.345139] vgaarb: loaded [ 0.345188] ACPI: bus type USB registered [ 0.345232] usbcore: registered new interface driver usbfs [ 0.345271] usbcore: registered new interface driver hub [ 0.345313] usbcore: registered new device driver usb [ 0.345458] PCI: Using ACPI for IRQ routing [ 0.346978] PCI: pci_cache_line_size set to 64 bytes [ 0.347040] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.347042] e820: reserve RAM buffer [mem 0x9d76c000-0x9fffffff] [ 0.347042] e820: reserve RAM buffer [mem 0xadb16000-0xafffffff] [ 0.347043] e820: reserve RAM buffer [mem 0xae4ed000-0xafffffff] [ 0.347044] e820: reserve RAM buffer [mem 0xaeb32000-0xafffffff] [ 0.347045] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff] [ 0.347045] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] [ 0.347143] NetLabel: Initializing [ 0.347172] NetLabel: domain hash size = 128 [ 0.347207] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.347251] NetLabel: unlabeled traffic allowed by default [ 0.347370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.347402] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.349475] clocksource: Switched to clocksource hpet [ 0.358675] VFS: Disk quotas dquot_6.6.0 [ 0.358734] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.358880] AppArmor: AppArmor Filesystem Enabled [ 0.358963] pnp: PnP ACPI init [ 0.359140] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.359173] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.359247] system 00:01: [mem 0xb0000000-0xdfffffff] has been reserved [ 0.359279] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.359349] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved [ 0.359381] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.359541] system 00:03: [io 0x0620-0x063f] has been reserved [ 0.359572] system 00:03: [io 0x0a00-0x0afe] has been reserved [ 0.359603] system 00:03: [io 0x0610-0x061f] has been reserved [ 0.359634] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.359671] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.359716] pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.359753] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.359777] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.359829] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.359861] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.360007] pnp 00:09: [dma 0 disabled] [ 0.360070] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.360260] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.360483] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.360515] system 00:0b: [io 0x040b] has been reserved [ 0.360545] system 00:0b: [io 0x04d6] has been reserved [ 0.360576] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 0.360606] system 00:0b: [io 0x0c14] has been reserved [ 0.360637] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.360667] system 00:0b: [io 0x0c52] has been reserved [ 0.360698] system 00:0b: [io 0x0c6c] has been reserved [ 0.360728] system 00:0b: [io 0x0c6f] has been reserved [ 0.360758] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved [ 0.360789] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved [ 0.360820] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 0.360851] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 0.360881] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 0.360912] system 00:0b: [io 0x0800-0x089f] has been reserved [ 0.360942] system 00:0b: [io 0x0b20-0x0b3f] has been reserved [ 0.360973] system 00:0b: [io 0x0900-0x090f] has been reserved [ 0.361003] system 00:0b: [io 0x0910-0x091f] has been reserved [ 0.361034] system 00:0b: [io 0xfe00-0xfefe] has been reserved [ 0.361065] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.361097] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.361128] system 00:0b: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.361160] system 00:0b: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.361190] system 00:0b: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.361221] system 00:0b: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.361252] system 00:0b: [mem 0xff800000-0xffffffff] has been reserved [ 0.361284] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.361467] pnp: PnP ACPI: found 12 devices [ 0.367974] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.368054] pci 0000:02:01.0: PCI bridge to [bus 03] [ 0.368088] pci 0000:02:01.0: bridge window [mem 0xff400000-0xff5fffff] [ 0.368124] pci 0000:02:02.0: PCI bridge to [bus 04] [ 0.368156] pci 0000:02:02.0: bridge window [mem 0xff200000-0xff3fffff] [ 0.368191] pci 0000:01:00.0: PCI bridge to [bus 02-04] [ 0.368224] pci 0000:01:00.0: bridge window [mem 0xff200000-0xff5fffff] [ 0.368259] pci 0000:00:02.0: PCI bridge to [bus 01-04] [ 0.368290] pci 0000:00:02.0: bridge window [mem 0xff200000-0xff5fffff] [ 0.368323] pci 0000:00:14.4: PCI bridge to [bus 05] [ 0.368362] pci 0000:00:15.0: PCI bridge to [bus 06] [ 0.368399] pci 0000:00:15.2: PCI bridge to [bus 07] [ 0.368431] pci 0000:00:15.2: bridge window [mem 0xff600000-0xff6fffff] [ 0.368466] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.368467] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.368468] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.368469] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.368471] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.368472] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.368473] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.368474] pci_bus 0000:01: resource 1 [mem 0xff200000-0xff5fffff] [ 0.368475] pci_bus 0000:02: resource 1 [mem 0xff200000-0xff5fffff] [ 0.368476] pci_bus 0000:03: resource 1 [mem 0xff400000-0xff5fffff] [ 0.368477] pci_bus 0000:04: resource 1 [mem 0xff200000-0xff3fffff] [ 0.368478] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window] [ 0.368479] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window] [ 0.368480] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window] [ 0.368481] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window] [ 0.368482] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.368483] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.368484] pci_bus 0000:05: resource 10 [mem 0xe0000000-0xffffffff window] [ 0.368485] pci_bus 0000:07: resource 1 [mem 0xff600000-0xff6fffff] [ 0.368564] NET: Registered protocol family 2 [ 0.368764] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.371129] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.371285] TCP: Hash tables configured (established 32768 bind 32768) [ 0.371362] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.371415] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.371515] NET: Registered protocol family 1 [ 0.371564] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.637737] PCI: CLS 64 bytes, default 64 [ 0.637799] Unpacking initramfs... [ 1.149902] Freeing initrd memory: 38288K [ 1.150339] iommu: Adding device 0000:00:01.0 to group 0 [ 1.150384] iommu: Adding device 0000:00:01.1 to group 0 [ 1.150468] iommu: Adding device 0000:00:02.0 to group 1 [ 1.150561] iommu: Adding device 0000:00:10.0 to group 2 [ 1.150608] iommu: Adding device 0000:00:10.1 to group 2 [ 1.150690] iommu: Adding device 0000:00:11.0 to group 3 [ 1.150778] iommu: Adding device 0000:00:12.0 to group 4 [ 1.150821] iommu: Adding device 0000:00:12.2 to group 4 [ 1.150908] iommu: Adding device 0000:00:13.0 to group 5 [ 1.150950] iommu: Adding device 0000:00:13.2 to group 5 [ 1.151041] iommu: Adding device 0000:00:14.0 to group 6 [ 1.151085] iommu: Adding device 0000:00:14.2 to group 6 [ 1.151129] iommu: Adding device 0000:00:14.3 to group 6 [ 1.151213] iommu: Adding device 0000:00:14.4 to group 7 [ 1.151295] iommu: Adding device 0000:00:14.5 to group 8 [ 1.151391] iommu: Adding device 0000:00:15.0 to group 9 [ 1.151438] iommu: Adding device 0000:00:15.2 to group 9 [ 1.151547] iommu: Adding device 0000:00:18.0 to group 10 [ 1.151591] iommu: Adding device 0000:00:18.1 to group 10 [ 1.151636] iommu: Adding device 0000:00:18.2 to group 10 [ 1.151681] iommu: Adding device 0000:00:18.3 to group 10 [ 1.151725] iommu: Adding device 0000:00:18.4 to group 10 [ 1.151770] iommu: Adding device 0000:00:18.5 to group 10 [ 1.151812] iommu: Adding device 0000:01:00.0 to group 1 [ 1.151853] iommu: Adding device 0000:02:01.0 to group 1 [ 1.151893] iommu: Adding device 0000:02:02.0 to group 1 [ 1.151940] iommu: Adding device 0000:03:00.0 to group 1 [ 1.151985] iommu: Adding device 0000:04:00.0 to group 1 [ 1.152029] iommu: Adding device 0000:07:00.0 to group 9 [ 1.152668] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.152701] AMD-Vi: Extended features (0x800000853): [ 1.152731] PreF PPR GT IA [ 1.152761] AMD-Vi: Interrupt remapping enabled [ 1.152923] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.154422] perf: AMD NB counters detected [ 1.154494] LVT offset 0 assigned for vector 0x400 [ 1.154542] perf: AMD IBS detected (0x000000ff) [ 1.154637] Scanning for low memory corruption every 60 seconds [ 1.155029] audit: initializing netlink subsys (disabled) [ 1.155096] audit: type=2000 audit(1517872830.952:1): initialized [ 1.155401] Initialise system trusted keyrings [ 1.155509] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 1.157131] zbud: loaded [ 1.157634] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.157874] fuse init (API version 7.26) [ 1.159225] Key type asymmetric registered [ 1.159258] Asymmetric key parser 'x509' registered [ 1.159328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.159395] io scheduler noop registered [ 1.159425] io scheduler deadline registered [ 1.159462] io scheduler cfq registered (default) [ 1.160411] pcieport 0000:00:02.0: Signaling PME with IRQ 25 [ 1.160456] pcieport 0000:00:15.0: Signaling PME with IRQ 26 [ 1.160502] pcieport 0000:00:15.2: Signaling PME with IRQ 27 [ 1.160662] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.160700] ACPI: Power Button [PWRB] [ 1.160763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.160797] ACPI: Power Button [PWRF] [ 1.161061] GHES: HEST is not enabled! [ 1.161181] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.181639] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.183061] Linux agpgart interface v0.103 [ 1.183347] tpm_tis 00:0a: can't request region for resource [mem 0xfed40000-0xfed4ffff] [ 1.183381] tpm_tis: probe of 00:0a failed with error -16 [ 1.184890] loop: module loaded [ 1.185126] libphy: Fixed MDIO Bus: probed [ 1.185156] tun: Universal TUN/TAP device driver, 1.6 [ 1.185186] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 1.185252] PPP generic driver version 2.4.2 [ 1.185331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.185364] ehci-pci: EHCI PCI platform driver [ 1.185575] QUIRK: Enable AMD PLL fix [ 1.185600] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.185635] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.185672] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.185713] ehci-pci 0000:00:12.2: debug port 1 [ 1.185787] ehci-pci 0000:00:12.2: irq 17, io mem 0xff74f000 [ 1.201564] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.201662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.201694] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.201728] usb usb1: Product: EHCI Host Controller [ 1.201758] usb usb1: Manufacturer: Linux 4.10.0-42-generic ehci_hcd [ 1.201788] usb usb1: SerialNumber: 0000:00:12.2 [ 1.201959] hub 1-0:1.0: USB hub found [ 1.201994] hub 1-0:1.0: 5 ports detected [ 1.202362] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.202396] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.202432] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.202473] ehci-pci 0000:00:13.2: debug port 1 [ 1.202536] ehci-pci 0000:00:13.2: irq 17, io mem 0xff74d000 [ 1.217562] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.217649] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.217680] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.217714] usb usb2: Product: EHCI Host Controller [ 1.217744] usb usb2: Manufacturer: Linux 4.10.0-42-generic ehci_hcd [ 1.217775] usb usb2: SerialNumber: 0000:00:13.2 [ 1.217947] hub 2-0:1.0: USB hub found [ 1.217980] hub 2-0:1.0: 5 ports detected [ 1.218233] ehci-platform: EHCI generic platform driver [ 1.218278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.218310] ohci-pci: OHCI PCI platform driver [ 1.218472] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.218505] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.218572] ohci-pci 0000:00:12.0: irq 18, io mem 0xff750000 [ 1.281604] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.281639] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.281673] usb usb3: Product: OHCI PCI host controller [ 1.281703] usb usb3: Manufacturer: Linux 4.10.0-42-generic ohci_hcd [ 1.281733] usb usb3: SerialNumber: 0000:00:12.0 [ 1.281916] hub 3-0:1.0: USB hub found [ 1.281951] hub 3-0:1.0: 5 ports detected [ 1.282303] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.282337] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.282392] ohci-pci 0000:00:13.0: irq 18, io mem 0xff74e000 [ 1.345627] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.345663] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.345697] usb usb4: Product: OHCI PCI host controller [ 1.345727] usb usb4: Manufacturer: Linux 4.10.0-42-generic ohci_hcd [ 1.345757] usb usb4: SerialNumber: 0000:00:13.0 [ 1.345943] hub 4-0:1.0: USB hub found [ 1.345979] hub 4-0:1.0: 5 ports detected [ 1.346340] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.346374] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5 [ 1.346433] ohci-pci 0000:00:14.5: irq 18, io mem 0xff74c000 [ 1.409602] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.409638] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.409672] usb usb5: Product: OHCI PCI host controller [ 1.409703] usb usb5: Manufacturer: Linux 4.10.0-42-generic ohci_hcd [ 1.409733] usb usb5: SerialNumber: 0000:00:14.5 [ 1.409919] hub 5-0:1.0: USB hub found [ 1.409955] hub 5-0:1.0: 2 ports detected [ 1.410122] ohci-platform: OHCI generic platform driver [ 1.410165] uhci_hcd: USB Universal Host Controller Interface driver [ 1.410362] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.410396] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 1.410616] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608 [ 1.410795] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.410827] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.410861] usb usb6: Product: xHCI Host Controller [ 1.410890] usb usb6: Manufacturer: Linux 4.10.0-42-generic xhci-hcd [ 1.410920] usb usb6: SerialNumber: 0000:00:10.0 [ 1.411044] hub 6-0:1.0: USB hub found [ 1.411083] hub 6-0:1.0: 2 ports detected [ 1.411198] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.411229] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7 [ 1.414029] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.414079] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.414110] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.414144] usb usb7: Product: xHCI Host Controller [ 1.416445] usb usb7: Manufacturer: Linux 4.10.0-42-generic xhci-hcd [ 1.416475] usb usb7: SerialNumber: 0000:00:10.0 [ 1.416597] hub 7-0:1.0: USB hub found [ 1.416632] hub 7-0:1.0: 2 ports detected [ 1.416855] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 1.416887] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8 [ 1.417106] xhci_hcd 0000:00:10.1: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608 [ 1.417272] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.417304] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.417338] usb usb8: Product: xHCI Host Controller [ 1.417368] usb usb8: Manufacturer: Linux 4.10.0-42-generic xhci-hcd [ 1.417399] usb usb8: SerialNumber: 0000:00:10.1 [ 1.417532] hub 8-0:1.0: USB hub found [ 1.417567] hub 8-0:1.0: 2 ports detected [ 1.417682] xhci_hcd 0000:00:10.1: xHCI Host Controller [ 1.417714] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9 [ 1.420518] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.420568] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.420599] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.420633] usb usb9: Product: xHCI Host Controller [ 1.420663] usb usb9: Manufacturer: Linux 4.10.0-42-generic xhci-hcd [ 1.420693] usb usb9: SerialNumber: 0000:00:10.1 [ 1.420813] hub 9-0:1.0: USB hub found [ 1.420848] hub 9-0:1.0: 2 ports detected [ 1.421025] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.423950] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.423983] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.424144] mousedev: PS/2 mouse device common for all mice [ 1.424314] rtc_cmos 00:07: RTC can wake from S4 [ 1.424444] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.424497] rtc_cmos 00:07: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.424535] i2c /dev entries driver [ 1.424616] device-mapper: uevent: version 1.0.3 [ 1.424711] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.424766] ledtrig-cpu: registered to indicate activity on CPUs [ 1.425099] NET: Registered protocol family 10 [ 1.428491] Segment Routing with IPv6 [ 1.428545] NET: Registered protocol family 17 [ 1.428586] Key type dns_resolver registered [ 1.428805] microcode: CPU0: patch_level=0x06001119 [ 1.428842] microcode: CPU1: patch_level=0x06001119 [ 1.428903] microcode: Microcode Update Driver: v2.2. [ 1.429025] registered taskstats version 1 [ 1.429093] Loading compiled-in X.509 certificates [ 1.431453] Loaded X.509 cert 'Build time autogenerated kernel key: 08f7e76e35960ddc5f58d339c2ab190bcc4bf201' [ 1.431515] zswap: loaded using pool lzo/zbud [ 1.440054] Key type big_key registered [ 1.440091] Key type trusted registered [ 1.441601] Key type encrypted registered [ 1.441640] AppArmor: AppArmor sha1 policy hashing enabled [ 1.441672] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.441722] evm: HMAC attrs: 0x1 [ 1.442055] Magic number: 6:63:352 [ 1.442204] rtc_cmos 00:07: setting system clock to 2018-02-05 23:20:31 UTC (1517872831) [ 1.442371] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.442471] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.442501] EDD information not available. [ 1.442586] PM: Hibernation image not present or could not be loaded. [ 1.444500] Freeing unused kernel memory: 2228K [ 1.444533] Write protecting the kernel read-only data: 14336k [ 1.445116] Freeing unused kernel memory: 1156K [ 1.445774] Freeing unused kernel memory: 268K [ 1.453147] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.464993] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.465097] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.465136] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.465178] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.466712] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.466765] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.474176] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.474229] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.474283] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.474649] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.518140] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED [ 1.530874] wmi: Mapper loaded [ 1.535412] ahci 0000:00:11.0: version 3.0 [ 1.535757] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xd impl SATA mode [ 1.535796] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 1.535834] ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented [ 1.539189] pps_core: LinuxPPS API ver. 1 registered [ 1.539223] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 1.540299] PTP clock support registered [ 1.541714] scsi host0: ahci [ 1.541916] scsi host1: ahci [ 1.542036] scsi host2: ahci [ 1.542151] scsi host3: ahci [ 1.542232] ata1: SATA max UDMA/133 abar m2048@0xff751000 port 0xff751100 irq 36 [ 1.542266] ata2: DUMMY [ 1.542296] ata3: SATA max UDMA/133 abar m2048@0xff751000 port 0xff751200 irq 38 [ 1.542332] ata4: SATA max UDMA/133 abar m2048@0xff751000 port 0xff751280 irq 39 [ 1.542964] tg3.c:v3.137 (May 11, 2014) [ 1.564263] AVX version of gcm_enc/dec engaged. [ 1.564299] AES CTR mode by8 optimization enabled [ 1.590928] tg3 0000:07:00.0 eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address a0:48:1c:8f:e6:0b [ 1.590969] tg3 0000:07:00.0 eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.591005] tg3 0000:07:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 1.591040] tg3 0000:07:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.593257] tg3 0000:07:00.0 enp7s0: renamed from eth0 [ 1.857473] ata4: SATA link down (SStatus 0 SControl 300) [ 2.017588] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.017646] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.018625] ata1.00: ATA-8: ST250DM000-1BD141, HP73, max UDMA/100 [ 2.018661] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.019927] ata1.00: configured for UDMA/100 [ 2.020166] ata3.00: ATAPI: hp DVD-RAM GHB0N, RK03, max UDMA/100 [ 2.020198] scsi 0:0:0:0: Direct-Access ATA ST250DM000-1BD14 HP73 PQ: 0 ANSI: 5 [ 2.024419] ata3.00: configured for UDMA/100 [ 2.049852] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.049892] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.049934] sd 0:0:0:0: [sda] Write Protect is off [ 2.049966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.049986] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.050017] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.052874] scsi 2:0:0:0: CD-ROM hp DVD-RAM GHB0N RK03 PQ: 0 ANSI: 5 [ 2.081362] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.081402] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.081622] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.081717] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.097455] sda: sda1 sda2 < sda5 > [ 2.097927] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.185574] tsc: Refined TSC clocksource calibration: 3593.285 MHz [ 2.185614] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb8b9d600, max_idle_ns: 440795234618 ns [ 3.209640] clocksource: Switched to clocksource tsc [ 3.537485] raid6: sse2x1 gen() 6357 MB/s [ 3.585483] raid6: sse2x1 xor() 4404 MB/s [ 3.633483] raid6: sse2x2 gen() 10554 MB/s [ 3.681481] raid6: sse2x2 xor() 6896 MB/s [ 3.729482] raid6: sse2x4 gen() 12262 MB/s [ 3.777483] raid6: sse2x4 xor() 5980 MB/s [ 3.777513] raid6: using algorithm sse2x4 gen() 12262 MB/s [ 3.777543] raid6: .... xor() 5980 MB/s, rmw enabled [ 3.777573] raid6: using ssse3x2 recovery algorithm [ 3.778689] xor: automatically using best checksumming function avx [ 3.779781] async_tx: api initialized (async) [ 3.819411] Btrfs loaded, crc32c=crc32c-intel [ 4.014688] random: fast init done [ 4.389311] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.683491] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 5.685935] systemd[1]: Detected architecture x86-64. [ 5.709540] systemd[1]: Set hostname to . [ 6.211219] random: crng init done [ 7.570434] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.570755] systemd[1]: Listening on udev Kernel Socket. [ 7.570988] systemd[1]: Listening on LVM2 metadata daemon socket. [ 7.571224] systemd[1]: Listening on udev Control Socket. [ 7.571454] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 7.571694] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.571941] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 8.612609] Loading iSCSI transport class v2.0-870. [ 8.752831] iscsi: registered transport (tcp) [ 8.947497] iscsi: registered transport (iser) [ 9.767477] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.148475] systemd-journald[387]: Received request to flush runtime journal from PID 1 [ 10.909301] tpm_inf_pnp 00:0a: Found TPM with ID IFX0102 [ 10.909308] tpm_inf_pnp: probe of 00:0a failed with error -22 [ 11.419433] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.483213] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 12.483216] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 12.483485] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 12.518754] kvm: Nested Virtualization enabled [ 12.518757] kvm: Nested Paging enabled [ 12.538560] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 12.683778] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5 [ 12.683838] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6 [ 12.683891] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7 [ 12.683944] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8 [ 12.695531] snd_hda_codec_realtek hdaudioC1D0: ALC221: SKU not ready 0x411111f0 [ 12.695860] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 12.695862] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 12.695863] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 12.695864] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 12.695865] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 12.695867] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 12.695868] snd_hda_codec_realtek hdaudioC1D0: Line=0x1b [ 12.705307] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 12.705367] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 [ 12.705421] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 12.705473] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 12.932267] EDAC MC: Ver: 3.0.0 [ 12.953097] MCE: In-kernel MCE decoding enabled. [ 13.168351] EDAC amd64: DRAM ECC disabled. [ 13.168353] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 13.642763] media: Linux media interface: v0.10 [ 13.676900] Linux video capture interface: v2.00 [ 14.058691] audit: type=1400 audit(1517872844.115:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=663 comm="apparmor_parser" [ 14.058694] audit: type=1400 audit(1517872844.115:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=663 comm="apparmor_parser" [ 14.058695] audit: type=1400 audit(1517872844.115:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=663 comm="apparmor_parser" [ 14.058696] audit: type=1400 audit(1517872844.115:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=663 comm="apparmor_parser" [ 14.177427] cx23885: cx23885 driver version 0.0.4 loaded [ 14.177623] cx23885: CORE cx23885[0]: subsystem: 0070:6a28, board: Hauppauge WinTV-QuadHD-DVB [card=56,autodetected] [ 14.280304] audit: type=1400 audit(1517872844.331:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=662 comm="apparmor_parser" [ 14.280307] audit: type=1400 audit(1517872844.331:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=662 comm="apparmor_parser" [ 14.280308] audit: type=1400 audit(1517872844.331:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=662 comm="apparmor_parser" [ 14.280310] audit: type=1400 audit(1517872844.331:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=662 comm="apparmor_parser" [ 14.329408] audit: type=1400 audit(1517872844.383:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=667 comm="apparmor_parser" [ 14.340966] audit: type=1400 audit(1517872844.391:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=668 comm="apparmor_parser" [ 14.517340] tveeprom: Hauppauge model 166200, rev B4I6, serial# 4035964939 [ 14.517342] tveeprom: MAC address is 00:0d:fe:8f:f0:0b [ 14.517343] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 14.517344] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 14.517345] tveeprom: audio processor is CX23885 (idx 39) [ 14.517346] tveeprom: decoder processor is CX23885 (idx 33) [ 14.517346] tveeprom: has no radio, has IR receiver, has no IR transmitter [ 14.517347] cx23885: cx23885[0]: warning: unknown hauppauge model #166200 [ 14.517348] cx23885: cx23885[0]: hauppauge eeprom: model=166200 [ 14.517350] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 14.518193] cx23885: cx23885[0]: cx23885 based dvb card [ 14.572230] i2c i2c-5: Added multiplexed i2c bus 8 [ 14.572233] si2168 5-0064: Silicon Labs Si2168-B40 successfully identified [ 14.572234] si2168 5-0064: firmware version: B 4.0.2 [ 14.665078] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 14.665091] dvbdev: DVB: registering new adapter (cx23885[0]) [ 14.665094] cx23885 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 14.665333] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 14.665334] cx23885: cx23885[0]: cx23885 based dvb card [ 14.671788] i2c i2c-5: Added multiplexed i2c bus 9 [ 14.671791] si2168 5-0066: Silicon Labs Si2168-B40 successfully identified [ 14.671792] si2168 5-0066: firmware version: B 4.0.2 [ 14.673149] si2157 6-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 14.673163] dvbdev: DVB: registering new adapter (cx23885[0]) [ 14.673166] cx23885 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 14.673398] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 14.673402] cx23885: cx23885[0]/0: found at 0000:03:00.0, rev: 4, irq: 19, latency: 0, mmio: 0xff400000 [ 14.674152] cx23885: CORE cx23885[1]: subsystem: 0070:6b28, board: Hauppauge WinTV-QuadHD-DVB [card=56,autodetected] [ 15.013241] tveeprom: Hauppauge model 166201, rev B4I6, serial# 4035964939 [ 15.013243] tveeprom: MAC address is 00:0d:fe:8f:f0:0b [ 15.013243] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4) [ 15.013244] tveeprom: TV standards ATSC/DVB Digital (eeprom 0x80) [ 15.013245] tveeprom: audio processor is CX23885 (idx 39) [ 15.013246] tveeprom: decoder processor is CX23885 (idx 33) [ 15.013246] tveeprom: has no radio [ 15.013247] cx23885: cx23885[1]: warning: unknown hauppauge model #166201 [ 15.013247] cx23885: cx23885[1]: hauppauge eeprom: model=166201 [ 15.013249] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 15.013251] cx23885: cx23885[1]: cx23885 based dvb card [ 15.019283] i2c i2c-10: Added multiplexed i2c bus 13 [ 15.019286] si2168 10-0064: Silicon Labs Si2168-B40 successfully identified [ 15.019287] si2168 10-0064: firmware version: B 4.0.2 [ 15.020603] si2157 11-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 15.020612] dvbdev: DVB: registering new adapter (cx23885[1]) [ 15.020615] cx23885 0000:04:00.0: DVB: registering adapter 2 frontend 0 (Silicon Labs Si2168)... [ 15.020878] cx23885: cx23885_dvb_register() allocating 1 frontend(s) [ 15.020879] cx23885: cx23885[1]: cx23885 based dvb card [ 15.027548] i2c i2c-10: Added multiplexed i2c bus 14 [ 15.027551] si2168 10-0066: Silicon Labs Si2168-B40 successfully identified [ 15.027552] si2168 10-0066: firmware version: B 4.0.2 [ 15.034827] si2157 11-0062: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 15.034839] dvbdev: DVB: registering new adapter (cx23885[1]) [ 15.034842] cx23885 0000:04:00.0: DVB: registering adapter 3 frontend 0 (Silicon Labs Si2168)... [ 15.035076] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5 [ 15.035080] cx23885: cx23885[1]/0: found at 0000:04:00.0, rev: 4, irq: 16, latency: 0, mmio: 0xff200000 [ 15.360995] ppdev: user-space parallel port driver [ 15.367275] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready [ 15.461042] input: HP WMI hotkeys as /devices/virtual/input/input13 [ 16.146335] Adding 3355644k swap on /dev/sda5. Priority:-1 extents:1 across:3355644k FS [ 17.383706] cgroup: new mount options do not match the existing superblock, will be ignored [ 18.133994] tg3 0000:07:00.0 enp7s0: Link is up at 1000 Mbps, full duplex [ 18.133996] tg3 0000:07:00.0 enp7s0: Flow control is off for TX and off for RX [ 18.134013] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready [ 24.366465] si2168 10-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 24.979264] si2168 10-0066: firmware version: B 4.0.11 [ 24.981683] cx23885 0000:04:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (42000000..870000000) [ 25.094980] si2168 10-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 25.704414] si2168 10-0064: firmware version: B 4.0.11 [ 25.706835] cx23885 0000:04:00.0: DVB: adapter 2 frontend 0 frequency 0 out of range (42000000..870000000) [ 25.726156] si2168 5-0066: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 26.333195] si2168 5-0066: firmware version: B 4.0.11 [ 26.335624] cx23885 0000:03:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (42000000..870000000) [ 26.379278] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 26.985455] si2168 5-0064: firmware version: B 4.0.11 [ 26.987882] cx23885 0000:03:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (42000000..870000000)

b-rad-NDi commented 6 years ago

You're using w_scan correct? Or is this Plex? The tail end of your logs would seem to imply something is trying, and failing, tuning to 0MHz.

I'll ask support if they've recall seeing something like this.

Saentist commented 6 years ago

I'm not using Plex, I have TVHeadend ;) This is how TVHedend detect frontend capability (this can be ignored it appear on each service restart)

estimadarocha commented 6 years ago

@b-rad-NDi i am probably with problems also!

i am also reporting on issue #17 using same cards but on the amd platform!

so i get back cards to z270 asus board with i7-7700k and brand new installation SO.

uname -a Linux srvtv 4.14.16-041416-generic #201801310931 SMP Wed Jan 31 14:33:23 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

lspci 00:00.0 Host bridge: Intel Corporation Device 591f (rev 05) 00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 05) 00:01.1 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x8) (rev 05) 00:14.0 USB controller: Intel Corporation Device a2af 00:16.0 Communication controller: Intel Corporation Device a2ba 00:17.0 SATA controller: Intel Corporation Device a282 00:1b.0 PCI bridge: Intel Corporation Device a2e7 (rev f0) 00:1c.0 PCI bridge: Intel Corporation Device a290 (rev f0) 00:1c.1 PCI bridge: Intel Corporation Device a291 (rev f0) 00:1c.2 PCI bridge: Intel Corporation Device a292 (rev f0) 00:1c.4 PCI bridge: Intel Corporation Device a294 (rev f0) 00:1c.6 PCI bridge: Intel Corporation Device a296 (rev f0) 00:1d.0 PCI bridge: Intel Corporation Device a298 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2c5 00:1f.2 Memory controller: Intel Corporation Device a2a1 00:1f.3 Audio device: Intel Corporation Device a2f0 00:1f.4 SMBus: Intel Corporation Device a2a3 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 01:00.1 Audio device: NVIDIA Corporation Device 10f1 (rev a1) 02:00.0 PCI bridge: Pericom Semiconductor Device 2304 (rev 05) 03:01.0 PCI bridge: Pericom Semiconductor Device 2304 (rev 05) 03:02.0 PCI bridge: Pericom Semiconductor Device 2304 (rev 05) 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) 05:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) 08:00.0 PCI bridge: Pericom Semiconductor Device 2304 (rev 05) 09:01.0 PCI bridge: Pericom Semiconductor Device 2304 (rev 05) 09:02.0 PCI bridge: Pericom Semiconductor Device 2304 (rev 05) 0a:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) 0b:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04) 0c:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32) 0d:00.0 USB controller: ASMedia Technology Inc. Device 2142 0e:00.0 USB controller: ASMedia Technology Inc. Device 2142 0f:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a804

On previous SO reinstall i just have to update kernel to a recent one and put on /lib/firmware this https://github.com/OpenELEC/dvb-firmware/blob/master/firmware/dvb-demod-si2168-b40-01.fw and everything it's fine.

dvb-fe-tool Device Silicon Labs Si2168 (/dev/dvb/adapter0/frontend0) capabilities: CAN_2G_MODULATION CAN_FEC_1_2 CAN_FEC_2_3 CAN_FEC_3_4 CAN_FEC_5_6 CAN_FEC_7_8 CAN_FEC_AUTO CAN_GUARD_INTERVAL_AUTO CAN_HIERARCHY_AUTO CAN_INVERSION_AUTO CAN_MULTISTREAM CAN_MUTE_TS CAN_QAM_16 CAN_QAM_32 CAN_QAM_64 CAN_QAM_128 CAN_QAM_256 CAN_QAM_AUTO CAN_QPSK CAN_TRANSMISSION_MODE_AUTO DVB API Version 5.10, Current v5 delivery system: DVBT Supported delivery systems: [DVBT] DVBT2 DVBC/ANNEX_A

femon -H -a 1 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 |

but can't use it on tvheadend also!

estimadarocha commented 6 years ago

how is this possible?

root@srvtv:/# femon -H -a 0 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | root@srvtv:/# femon -H -a 1 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | root@srvtv:/# femon -H -a 2 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | root@srvtv:/# femon -H -a 3 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | root@srvtv:/# femon -H -a 4 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | root@srvtv:/# femon -H -a 5 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 0% | snr 0% | ber 0 | unc 1 | root@srvtv:/# femon -H -a 6 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | root@srvtv:/# femon -H -a 7 -c 2 FE: Silicon Labs Si2168 (DVBT) Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 | Problem retrieving frontend information: Operation not supported status | signal 38% | snr 45% | ber 1819042149 | unc 1 |