LordTricky commented 4 years ago

Hi, is there any news on when this will be supported?

I had my HDR4000 working perfect under ubuntu 18.04 with kernel 5.0.0.36 / 5.0.0.35... but all of a sudden it stopped working, i then removed linux-image-mediatree linux-headers-mediatree with the intention of reinstalling. I now get errors "linux-image-mediatree : Depends: linux-mediatree but it is not going to be installed E: Unable to correct problems, you have held broken packages." even though linux-mediatree is installed. And modprobe: ERROR: could not insert 'cx88_dvb': No such device

I am at the point of accepting defeat and losing satellite completely but any help will be appreciated.

b-rad-NDi commented 4 years ago

There is LTS support for Xenial and Bionic.

In addition I did some virtual package renaming. I tested it out on a variety of platforms and it worked for me, but it seems like there's edge cases. Essentially linux-image-mediatree and linux-headers-mediatree are deprecated. Now there is one single package linux-mediatree. There is also linux-hwe-mediatree. If you wipe out the old packages and ensure only the new one and it's dependency (the 11191317 kernel) then things should work.

I do not touch the cx88 driver, so if it stopped working then that would be an unfortunate side effect of updating the media tree drivers at the beginning of the month. Something in cx88 might have been broken at that instant in time. I'll review the logs.

LordTricky commented 4 years ago

Thank you very much, so if i apt remove everything i have installed from the ppa (currently all hwe variants) and linux-mediatree, reboot and find / install kernel version 5.0.0.11191317 then reinstall linux-hwe-mediatree it should come back?

At the moment it doesn't even show up in dmesg, i know i've broke it (assumed originally from a microcode update) then worse by trying to reinstall it, i just cant reconfigure the whole server as i would lose too much data and time getting it back to where i had it.

b-rad-NDi commented 4 years ago

There is definitely not any reason to re-install. All you should ever have to install is the virtual package, once, thereafter as it updates it installs new kernel and deprecates the old one for auto-removal. By installing (or just leaving it around) an Ubuntu kernel, and removing all mediatree packages you would be at vanilla.

LordTricky commented 4 years ago

So all i need installed is linux-mediatree? does this provide an alternate driver from cx88? Sorry i'm not great with linux but usually get by.

b-rad-NDi commented 4 years ago

linux-mediatree is a virtual package. It's only dependencies are the actual kernel packages, including all drivers, updated to the latest mainline tip Linux kernel version. This includes everything in drivers/media, so cx88 is the most up to date driver available at the sync time. It's done this way to ensure updates happen. When linux-mediatree updates, you get a new version, which depends on new kernel packages. Everything is kept up to date automagically without you having to be specific.

LordTricky commented 4 years ago

ok cool, should i also make clean in linuxtv media_build?

Do you have any idea why it just stopped working about 3 days ago? after reboots i had to modprobe cx88-dvb to get it working but now the card isnt even recognised but i have been messing trying to fix it.

b-rad-NDi commented 4 years ago

Wait...are you building this yourself and installing/using those packages? Are you downloading the linuxtv.org media_build system, compiling it, then installing those drivers?

LordTricky commented 4 years ago

yes im building my own kernel with linuxtv, i was under the impression that i needed linuxtv media_build for my astrometa DVB-C usb tuner (which works perfectly) and linuxtv says they support the HDR4000 as well, so i dont think i am installing any driver as its already in media_build at least thats how i have took it. I have the firmware files in lib/firmware/ dvb-fe-cx24116.fw dvb-fe-cx24116-1.26.90.0.fw but i did also had linux-image-mediatree and linux-headers-mediatree installed from the ppa.

I now cant reinstall linux-image-mediatree linux-headers-mediatree due to apparently held packages or the deprecation, aptitude says The following packages have unmet dependencies: linux-mediatree : Breaks: linux-image-mediatree (> 0) but 0.19.7+bionic is to be installed The following actions will resolve these dependencies:

 Keep the following packages at their current version:

1) linux-image-mediatree [Not Installed]

b-rad-NDi commented 4 years ago

That's the thing. You are essentially overriding the entire purpose of this project. This project uses the linuxtv.org media_build system to produce a set of tip drivers that are then backported and integrated into whatever kernel I offer. When you compile media_build and then install those drivers you are nuking everything included by my packages. Unless you require a commit more recent than last month, you have no reason to use the media_build system. That is why you are using my ppa.

Now onto the dependency issue: linux-mediatree == linux-image-mediatree + linux-headers-mediatree The packages are intentionally broken. You should only install linux-mediatree.

LordTricky commented 4 years ago

ok so for the HDR4000 card my problem is a conflict between linuxtv and your ppa, can you suggest my best option for getting back to your kernel instead of linuxtv please. I assume make clean wont remove linuxtv kernel?

LordTricky commented 4 years ago

ok so i have tried to build your kernel, at least i assume thats what im doing. I have tried git clone https://github.com/b-rad-NDi/Ubuntu-media-tree-kernel-builder.git brad cd brad ./mediatree-kbuild.sh -i -p -x cd media_build ./build make install which seems to have reset my drivers in /lib/modules i now get this in dmesg dmesg | grep cx [ 7.707975] cx88xx: func 1: Can't get MMIO memory @ 0x0, subsystem: 0070:6902 [ 7.736900] Modules linked in: dvb_core(OE) videobuf2_dma_sg(OE) videobuf2_vmalloc(OE) cx88_alsa(OE+) cx88xx(OE) videobuf2_memops(OE) videobuf2_v4l2(OE) tveeprom(OE) sparse_keymap(+) videobuf2_common(OE) joydev input_leds wmi_bmof ch341 videodev(OE) mc(OE) snd_hdmi_lpe_audio(+) usbserial lpc_ich snd_pcm snd_timer intel_xhci_usb_role_switch roles snd soundcore mei_txe hci_uart mei btqca parport_pc btrtl parport btbcm btintel bluetooth ecdh_generic rfkill_gpio mac_hid intel_int0002_vgpio sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid i915 crct10dif_pclmul crc32_pclmul kvmgt vfio_mdev ghash_clmulni_intel mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit drm_kms_helper aesni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops aes_x86_64 [ 7.737020] snd_cx88_dev_free+0x20/0x40 [cx88_alsa] [ 7.737056] cx88_audio_initdev+0x1ba/0x460 [cx88_alsa] [ 7.737103] cx88_audio_pci_driver_init+0x23/0x1000 [cx88_alsa] [ 7.756136] RIP: 0010:cx88_core_put+0xa/0x100 [cx88xx] [ 7.798737] snd_cx88_dev_free+0x2c/0x40 [cx88_alsa] [ 7.823478] cx88_audio_initdev+0x1ba/0x460 [cx88_alsa] [ 7.878218] cx88_audio_pci_driver_init+0x23/0x1000 [cx88_alsa] [ 7.941922] Modules linked in: dvb_core(OE) videobuf2_dma_sg(OE) videobuf2_vmalloc(OE) cx88_alsa(OE+) cx88xx(OE) videobuf2_memops(OE) videobuf2_v4l2(OE) tveeprom(OE) sparse_keymap(+) videobuf2_common(OE) joydev input_leds wmi_bmof ch341 videodev(OE) mc(OE) snd_hdmi_lpe_audio(+) usbserial lpc_ich snd_pcm snd_timer intel_xhci_usb_role_switch roles snd soundcore mei_txe hci_uart mei btqca parport_pc btrtl parport btbcm btintel bluetooth ecdh_generic rfkill_gpio mac_hid intel_int0002_vgpio sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid i915 crct10dif_pclmul crc32_pclmul kvmgt vfio_mdev ghash_clmulni_intel mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit drm_kms_helper aesni_intel syscopyarea sysfillrect sysimgblt fb_sys_fops aes_x86_64 [ 7.972389] RIP: 0010:cx88_core_put+0xa/0x100 [cx88xx] [ 7.972666] cx88xx: func 2: Can't get MMIO memory @ 0x0, subsystem: 0070:6902 [ 7.989136] cx88-mpeg driver manager: probe of 0000:04:00.2 failed with error -22 [ 8.055101] cx88xx: func 0: Can't get MMIO memory @ 0x0, subsystem: 0070:6902 [ 8.070237] cx8800: probe of 0000:04:00.0 failed with error -22 [ 8.271149] i2c i2c-9: cxd2841er_attach(): I2C adapter 00000000be2ffac5 SLVX addr 6e SLVT addr 6c [ 8.284448] i2c i2c-9: cxd2841er_attach(): attaching CXD2837ER DVB-C/T/T2 frontend [ 8.289095] i2c i2c-9: cxd2841er_attach(): chip ID 0xb1 OK. [ 109.410058] cx88_dvb: cx2388x dvb driver version 1.0.0 loaded [ 109.410144] cx8802: registering cx8802 driver, type: dvb access: shared

What am i misunderstanding or doing wrong please?

b-rad-NDi commented 4 years ago

You are not ever supposed to touch anything in that directory. None of my (minimal) instructions indicate as such.

# help
./mediatree-kbuild.sh -h
# initialize
./mediatree-kbuild.sh -i
# patch
./mediatree-kbuild.sh -px
# clean
./mediatree-kbuild.sh -c
# build
./mediatree-kbuild.sh -b
# to start fresh
./mediatree-kbuild.sh -r

LordTricky commented 4 years ago

yes i was guessing how to use it, and trying to work around an error, ./mediatree-kbuild.sh -c results in ./mediatree-kbuild.sh -c for i in debian.master/control.stub.in; do \ new=echo $i | sed 's/\.in$//'; \ cat $i | sed -e 's/PKGVER/4.15.0/g' \ -e 's/ABINUM/70201911261414/g' \ -e 's/SRCPKGNAME/linux/g' \ -e 's/=HUMAN=/64 bit x86/g' \

$new; \ done flavours="debian.master/control.d/vars.generic debian.master/control.d/vars.generic-lpae debian.master/control.d/vars.lowlatency";\ for i in $flavours; do \ /bin/bash -e debian/scripts/control-create $i "" | \ sed -e 's/PKGVER/4.15.0/g' \ -e 's/ABINUM/70201911261414/g' \ -e 's/SRCPKGNAME/linux/g' \ -e 's/=HUMAN=/64 bit x86/g' \

debian.master/control.stub; \ done echo "# placebo control.stub for kernel-wedge flow change" >debian/control.stub cp debian.master/control.stub debian/control export KW_DEFCONFIG_DIR=debian.master/d-i && \ export KW_CONFIG_DIR=debian.master/d-i && \ LANG=C kernel-wedge gen-control 4.15.0-70201911261414 | \ perl -f debian/scripts/misc/kernel-wedge-arch.pl amd64 \ /home/tricky/brad/ubuntu-bionic/debian/control /bin/bash: line 2: kernel-wedge: command not found dh_testdir /bin/bash: dh_testdir: command not found debian/rules:116: recipe for target 'clean' failed make: *** [clean] Error 127

am i missing a dependency or something?

LordTricky commented 4 years ago

was missing kernel-wedge. Now building / compiling, will report back in an hour or so once its finished.

Thank you for your help :)

LordTricky commented 4 years ago

wow, almost 4 hours of building then failed with some package not found errors

II: dkms-build downloading spl (spl-dkms_0.7.5-1ubuntu2_all.deb) --2019-11-26 18:31:03-- http://ppa.launchpad.net/b-rad/kernel+mediatree+hauppauge/ubuntu/pool/universe/s/spl-linux/spl-dkms_0.7.5-1ubuntu2_all.deb Resolving ppa.launchpad.net (ppa.launchpad.net)... 91.189.95.83, 2001:67c:1560:8008::15 Connecting to ppa.launchpad.net (ppa.launchpad.net)|91.189.95.83|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2019-11-26 18:31:03 ERROR 404: Not Found.

--2019-11-26 18:31:03-- http://ppa.launchpad.net/b-rad/kernel+mediatree+hauppauge/ubuntu/pool/main/s/spl-linux/spl-dkms_0.7.5-1ubuntu2_all.deb Resolving ppa.launchpad.net (ppa.launchpad.net)... 91.189.95.83, 2001:67c:1560:8008::15 Connecting to ppa.launchpad.net (ppa.launchpad.net)|91.189.95.83|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2019-11-26 18:31:03 ERROR 404: Not Found.

--2019-11-26 18:31:03-- http://security.ubuntu.com/ubuntu/pool/universe/s/spl-linux/spl-dkms_0.7.5-1ubuntu2_all.deb Resolving security.ubuntu.com (security.ubuntu.com)... 91.189.91.26, 91.189.91.23, 91.189.88.162, ... Connecting to security.ubuntu.com (security.ubuntu.com)|91.189.91.26|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 392728 (384K) [application/x-debian-package] Saving to: 'spl-dkms_0.7.5-1ubuntu2_all.deb'

spl-dkms_0.7.5-1ubuntu2_all.deb 100%[=====================================================================================================================>] 383.52K 836KB/s in 0.5s

2019-11-26 18:31:04 (836 KB/s) - 'spl-dkms_0.7.5-1ubuntu2_all.deb' saved [392728/392728]

II: dkms-build building spl debian/scripts/dkms-build: line 120: /usr/sbin/dkms: No such file or directory debian/scripts/dkms-build: line 132: /home/tricky/brad/ubuntu-bionic/debian/build/build-generic/_____dkms/build/spl/0.7.5/4.15.0-70201911261500-generic/*/log/make.log: No such file or directory debian/rules.d/2-binary-arch.mk:112: recipe for target 'install-generic' failed make: *** [install-generic] Error 1

real 210m0.149s user 629m30.948s sys 106m10.105s

Any idea's?

b-rad-NDi commented 4 years ago

This is something dumb that Ubuntu did recently. They hardcoded package versions into their build system. Packages which update more quickly than the kernel does and which are removed from the archives the moment they're deprecated. You basically need to bump the version number yourself in debian/dkms-versions. There's three packages that couple have changed, so you might as well look each up the first time. They're all in the dkms-versions file. You basically look through universe/multiverse repos for the correct version. Yes, it's a hassle.

LordTricky commented 4 years ago

ok i did apt-get install dkms spl-dkms sudo ./mediatree-kbuild.sh -c sudo ./mediatree-kbuild.sh -b And after almost 5 hours i think it has finally built, with the last part of the output saying Debug: install-perarch

Add the tools.

Debug: binary-perarch

real 257m42.386s user 676m45.149s sys 130m23.804s

Now i really don't want to screw this up and wait another 5 hours. How do i now install the kernel? or is it already installed by your script? It sounds like ./mediatree-kbuild.sh -r will wipe out the last 5 hours of compiling?

LordTricky commented 4 years ago

should i be doing sudo dpkg -i linux-image-4.15.0-70201911261949-generic_4.15.0-70201911261949.1+mediatree+hauppauge_amd64.deb linux-modules-4.15.0-70201911261949-generic_4.15.0-70201911261949.1+mediatree+hauppauge_amd64.deb linux-modules-extra-4.15.0-70201911261949-generic_4.15.0-70201911261949.1+mediatree+hauppauge_amd64.deb linux-buildinfo-mediatree-4.15.0-70201911261949-generic_4.15.0-70201911261949.1+mediatree+hauppauge_amd64.deb linux-headers-4.15.0-70201911261949-generic_4.15.0-70201911261949.1+mediatree+hauppauge_amd64.deb

does the order matter? i also have 2 other header files but they were created hours ago so i assume they are from the failed builds, should i ignore those?

b-rad-NDi commented 4 years ago

As you've found, the debs are produced in the top level directory. Now that you've built it (4+ hours ouch, mine takes under 60min) you will only have to reset the directories to do a fresh build. This will not affect the built debs. All packages are time stamped, and one headers package is created very early so will exist even in the case of failed build. You will need two headers packages, image, modules, and modules-extra. If you tell dpkg to install all of them at once it will figure things out.

LordTricky commented 4 years ago

yeah i went with sudo dpkg -i linux4.15.0-70201911261949 it installed, rebooted but still had no DVR4000 :(

LordTricky commented 4 years ago

can you see anything that is glaringly obvious to you but i'm blind to?

i do see something about trying to free an already free IRQ but have no idea how to handle it.

dmesg [ 0.000000] microcode: microcode updated early to revision 0x368, date = 2019-04-23 [ 0.000000] Linux version 4.15.0-70201911261949-generic (root@ubuntu) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #1+mediatree+hauppauge SMP Tue Nov 26 19:52:26 GMT 2019 (Ubuntu 4.15.0-70201911261949.1+mediatree+hauppauge-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-70201911261949-generic root=/dev/mapper/ubuntu--vg-root ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000725e2fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000725e3000-0x0000000072660fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000072661000-0x0000000072672fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000072673000-0x000000007355efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007355f000-0x000000007389afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007389b000-0x00000000738f2fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000738f3000-0x0000000073adffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000073ae0000-0x0000000073fc2fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000073fc3000-0x0000000073ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x73897218 ACPI=0x72664000 ACPI 2.0=0x72664000 SMBIOS=0xf05b0 MPS=0xfd610 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: ASUS All Series/N3150M-E, BIOS 0304 06/09/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 076B00000 mask FFFF00000 uncachable [ 0.000000] 2 base 076C00000 mask FFFC00000 uncachable [ 0.000000] 3 base 077000000 mask FFF000000 uncachable [ 0.000000] 4 base 078000000 mask FF8000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask F80000000 write-back [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 8043M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 7 lose cover RAM: 0G [ 0.000000] e820: update [mem 0x76b00000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x74000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] [ 0.000000] esrt: Reserving ESRT space from 0x0000000073897218 to 0x0000000073897250. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] BRK [0x240f41000, 0x240f41fff] PGTABLE [ 0.000000] BRK [0x240f42000, 0x240f42fff] PGTABLE [ 0.000000] BRK [0x240f43000, 0x240f43fff] PGTABLE [ 0.000000] BRK [0x240f44000, 0x240f44fff] PGTABLE [ 0.000000] BRK [0x240f45000, 0x240f45fff] PGTABLE [ 0.000000] BRK [0x240f46000, 0x240f46fff] PGTABLE [ 0.000000] BRK [0x240f47000, 0x240f47fff] PGTABLE [ 0.000000] BRK [0x240f48000, 0x240f48fff] PGTABLE [ 0.000000] BRK [0x240f49000, 0x240f49fff] PGTABLE [ 0.000000] BRK [0x240f4a000, 0x240f4afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x310a3000-0x34848fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000072664000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x0000000072664080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000726711E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170831/tbfadt-603) [ 0.000000] ACPI: DSDT 0x0000000072664198 00D04D (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x000000007355EE80 000040 [ 0.000000] ACPI: APIC 0x00000000726712F8 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x0000000072671380 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000726713C8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x0000000072671468 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000726714A8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x0000000072671C10 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x0000000072671EA0 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x0000000072672020 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: LPIT 0x0000000072672068 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D) [ 0.000000] ACPI: CSRT 0x00000000726721C8 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x27ffd0000-0x27fffafff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000003efff] [ 0.000000] node 0: [mem 0x0000000000040000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000725e2fff] [ 0.000000] node 0: [mem 0x00000000738f3000-0x0000000073adffff] [ 0.000000] node 0: [mem 0x0000000073fc3000-0x0000000073ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Reserved but unavailable: 97 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.000000] On node 0 totalpages: 2041259 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 26 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7257 pages used for memmap [ 0.000000] DMA32 zone: 464397 pages, LIFO batch:31 [ 0.000000] Normal zone: 24576 pages used for memmap [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x0000000076f00000-0x000000007eefffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x725e3000-0x72660fff] [ 0.000000] PM: Registered nosave memory: [mem 0x72661000-0x72672fff] [ 0.000000] PM: Registered nosave memory: [mem 0x72673000-0x7355efff] [ 0.000000] PM: Registered nosave memory: [mem 0x7355f000-0x7389afff] [ 0.000000] PM: Registered nosave memory: [mem 0x7389b000-0x738f2fff] [ 0.000000] PM: Registered nosave memory: [mem 0x73ae0000-0x73fc2fff] [ 0.000000] PM: Registered nosave memory: [mem 0x74000000-0x76efffff] [ 0.000000] PM: Registered nosave memory: [mem 0x76f00000-0x7eefffff] [ 0.000000] PM: Registered nosave memory: [mem 0x7ef00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfe9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0x7ef00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2009336 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-70201911261949-generic root=/dev/mapper/ubuntu--vg-root ro [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7809100K/8165036K available (12300K kernel code, 2481K rwdata, 4260K rodata, 2432K init, 2388K bss, 355936K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39315 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.024000] tsc: Detected 1600.000 MHz processor [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.030440] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.032419] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.032549] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.032621] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.033134] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.033147] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.033180] CPU0: Thermal monitoring enabled (TM1) [ 0.033191] process: using mwait in idle threads [ 0.033202] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.033208] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 [ 0.033216] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.033225] Spectre V2 : Mitigation: Full generic retpoline [ 0.033231] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.033238] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.033259] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.033306] MDS: Mitigation: Clear CPU buffers [ 0.033708] Freeing SMP alternatives memory: 36K [ 0.044515] TSC deadline timer enabled [ 0.044521] smpboot: CPU0: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3) [ 0.044793] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.044828] ... version: 3 [ 0.044833] ... bit width: 40 [ 0.044837] ... generic registers: 2 [ 0.044842] ... value mask: 000000ffffffffff [ 0.044847] ... max period: 0000007fffffffff [ 0.044852] ... fixed-purpose events: 3 [ 0.044857] ... event mask: 0000000700000003 [ 0.044979] Hierarchical SRCU implementation. [ 0.047144] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.047217] smp: Bringing up secondary CPUs ... [ 0.047597] x86: Booting SMP configuration: [ 0.047606] .... node #0, CPUs: #1 #2 #3 [ 0.052491] smp: Brought up 1 node, 4 CPUs [ 0.052491] smpboot: Max logical packages: 1 [ 0.052491] smpboot: Total of 4 processors activated (12800.00 BogoMIPS) [ 0.054239] devtmpfs: initialized [ 0.054239] x86/mm: Memory block size: 128MB [ 0.057511] evm: security.selinux [ 0.057518] evm: security.SMACK64 [ 0.057523] evm: security.SMACK64EXEC [ 0.057527] evm: security.SMACK64TRANSMUTE [ 0.057531] evm: security.SMACK64MMAP [ 0.057536] evm: security.apparmor [ 0.057540] evm: security.ima [ 0.057544] evm: security.capability [ 0.057599] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes) [ 0.057599] PM: Registering ACPI NVS region [mem 0x72673000-0x7355efff] (15646720 bytes) [ 0.057599] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.057599] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.057599] pinctrl core: initialized pinctrl subsystem [ 0.057599] RTC time: 2:51:34, date: 11/27/19 [ 0.057599] NET: Registered protocol family 16 [ 0.057599] audit: initializing netlink subsys (disabled) [ 0.057599] audit: type=2000 audit(1574823094.056:1): state=initialized audit_enabled=0 res=1 [ 0.060047] cpuidle: using governor ladder [ 0.060056] cpuidle: using governor menu [ 0.060099] ACPI: bus type PCI registered [ 0.060109] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.060268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.060283] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.060292] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) [ 0.060320] PCI: Using configuration type 1 for base access [ 0.064080] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.064262] ACPI: Added _OSI(Module Device) [ 0.064271] ACPI: Added _OSI(Processor Device) [ 0.064277] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.064282] ACPI: Added _OSI(Processor Aggregator Device) [ 0.064289] ACPI: Added _OSI(Linux-Dell-Video) [ 0.064295] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.064301] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.084590] ACPI: Dynamic OEM Table Load: [ 0.084615] ACPI: SSDT 0xFFFF8C6CF675B000 000613 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.085503] ACPI: Dynamic OEM Table Load: [ 0.085520] ACPI: SSDT 0xFFFF8C6CF61AFC00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.087301] ACPI: Dynamic OEM Table Load: [ 0.087317] ACPI: SSDT 0xFFFF8C6CF6189800 00015F (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.088076] ACPI: Dynamic OEM Table Load: [ 0.088091] ACPI: SSDT 0xFFFF8C6CF61A2D80 00008D (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.093837] ACPI: Interpreter enabled [ 0.093900] ACPI: (supports S0 S3 S4 S5) [ 0.093908] ACPI: Using IOAPIC for interrupt routing [ 0.094013] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.095863] ACPI: Enabled 7 GPEs in block 00 to 3F [ 0.109208] ACPI: Power Resource [USBC] (on) [ 0.126903] ACPI: Power Resource [CLK0] (off) [ 0.127949] ACPI: Power Resource [CLK0] (off) [ 0.128090] ACPI: Power Resource [CLK1] (off) [ 0.147064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.147089] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.148189] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.148236] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.149872] PCI host bridge to bus 0000:00 [ 0.149883] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.149892] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.149900] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.149907] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.149915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.149923] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.149932] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.149940] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.149949] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.149968] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 [ 0.150444] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000 [ 0.150471] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] [ 0.150484] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] [ 0.150495] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.150528] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.150913] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601 [ 0.150981] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f] [ 0.150994] pci 0000:00:13.0: reg 0x24: [mem 0x91311000-0x913117ff] [ 0.151065] pci 0000:00:13.0: PME# supported from D3hot [ 0.151408] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 [ 0.151443] pci 0000:00:14.0: reg 0x10: [mem 0x91300000-0x9130ffff 64bit] [ 0.151550] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.151939] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 [ 0.151969] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff] [ 0.151982] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff] [ 0.152086] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.152429] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 [ 0.152556] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.152908] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400 [ 0.153038] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.153385] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400 [ 0.153513] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.153871] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 [ 0.154328] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500 [ 0.154399] pci 0000:00:1f.3: reg 0x10: [mem 0x91310000-0x9131001f] [ 0.154515] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.155116] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.155300] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.155346] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.155386] pci 0000:02:00.0: reg 0x18: [mem 0x91204000-0x91204fff 64bit] [ 0.155411] pci 0000:02:00.0: reg 0x20: [mem 0x91200000-0x91203fff 64bit] [ 0.155560] pci 0000:02:00.0: supports D1 D2 [ 0.155563] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164054] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.164067] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.164072] pci 0000:00:1c.2: bridge window [mem 0x91200000-0x912fffff] [ 0.164226] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400 [ 0.164459] pci 0000:03:00.0: supports D1 D2 [ 0.164462] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.176031] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.176172] pci 0000:04:00.0: [14f1:8800] type 00 class 0x040000 [ 0.176468] pci 0000:04:00.1: [14f1:8811] type 00 class 0x048000 [ 0.176751] pci 0000:04:00.2: [14f1:8802] type 00 class 0x048000 [ 0.177030] pci 0000:04:00.4: [14f1:8804] type 00 class 0x048000 [ 0.177380] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.182264] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.182552] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.182842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.183130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.183417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.183702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) [ 0.183986] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.184272] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.185879] SCSI subsystem initialized [ 0.185927] libata version 3.00 loaded. [ 0.185927] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.185927] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.185927] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.185927] vgaarb: loaded [ 0.185927] ACPI: bus type USB registered [ 0.185927] usbcore: registered new interface driver usbfs [ 0.185927] usbcore: registered new interface driver hub [ 0.185927] usbcore: registered new device driver usb [ 0.185927] EDAC MC: Ver: 3.0.0 [ 0.185927] Registered efivars operations [ 0.192554] PCI: Using ACPI for IRQ routing [ 0.194654] PCI: pci_cache_line_size set to 64 bytes [ 0.194747] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 0.194750] e820: reserve RAM buffer [mem 0x725e3000-0x73ffffff] [ 0.194753] e820: reserve RAM buffer [mem 0x73ae0000-0x73ffffff] [ 0.194993] NetLabel: Initializing [ 0.195001] NetLabel: domain hash size = 128 [ 0.195005] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.195042] NetLabel: unlabeled traffic allowed by default [ 0.197424] clocksource: Switched to clocksource refined-jiffies [ 0.226354] VFS: Disk quotas dquot_6.6.0 [ 0.226409] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.226671] AppArmor: AppArmor Filesystem Enabled [ 0.226752] pnp: PnP ACPI init [ 0.226917] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.227399] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.227410] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.227418] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.227434] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.227808] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.227826] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.229316] pnp 00:03: [irq 0 disabled] [ 0.229320] pnp 00:03: [dma 0 disabled] [ 0.229751] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 PNP0401 (active) [ 0.230714] pnp 00:04: [irq 0 disabled] [ 0.230718] pnp 00:04: [dma 0 disabled] [ 0.230845] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.235705] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.235839] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.235851] system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved [ 0.235859] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.235868] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.235875] system 00:06: [mem 0xfed06000-0xfed06fff] has been reserved [ 0.235884] system 00:06: [mem 0xfed08000-0xfed09fff] has been reserved [ 0.235892] system 00:06: [mem 0xfed80000-0xfedbffff] has been reserved [ 0.235900] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.235914] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.235931] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.236871] pnp: PnP ACPI: found 7 devices [ 0.245904] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.245952] clocksource: Switched to clocksource acpi_pm [ 0.245991] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.245997] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.246002] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.246060] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91400000-0x915fffff] [ 0.246077] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91600000-0x917fffff 64bit pref] [ 0.246089] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.246100] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.246108] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.246120] pci 0000:00:1c.0: bridge window [mem 0x91400000-0x915fffff] [ 0.246131] pci 0000:00:1c.0: bridge window [mem 0x91600000-0x917fffff 64bit pref] [ 0.246146] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.246155] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff] [ 0.246166] pci 0000:00:1c.2: bridge window [mem 0x91200000-0x912fffff] [ 0.246184] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.246215] pci 0000:00:1c.3: PCI bridge to [bus 03-04] [ 0.246235] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.246239] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.246242] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.246245] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.246248] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.246251] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.246254] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.246257] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window] [ 0.246261] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.246264] pci_bus 0000:01: resource 1 [mem 0x91400000-0x915fffff] [ 0.246267] pci_bus 0000:01: resource 2 [mem 0x91600000-0x917fffff 64bit pref] [ 0.246270] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.246273] pci_bus 0000:02: resource 1 [mem 0x91200000-0x912fffff] [ 0.246652] NET: Registered protocol family 2 [ 0.247028] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.247348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.247731] TCP: Hash tables configured (established 65536 bind 65536) [ 0.247897] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.248000] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.248000] NET: Registered protocol family 1 [ 0.248000] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.248000] PCI: CLS 64 bytes, default 64 [ 0.248000] Unpacking initramfs... [ 1.891888] Freeing initrd memory: 56984K [ 1.891985] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.891998] software IO TLB: mapped [mem 0x69cf8000-0x6dcf8000] (64MB) [ 1.892148] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns [ 1.892227] clocksource: Switched to clocksource tsc [ 1.892443] Scanning for low memory corruption every 60 seconds [ 1.893904] Initialise system trusted keyrings [ 1.893936] Key type blacklist registered [ 1.894044] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.897008] zbud: loaded [ 1.898197] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.898638] fuse init (API version 7.26) [ 1.902482] Key type asymmetric registered [ 1.902495] Asymmetric key parser 'x509' registered [ 1.902618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.902725] io scheduler noop registered [ 1.902733] io scheduler deadline registered [ 1.902808] io scheduler cfq registered (default) [ 1.904275] pcieport 0000:00:1c.0: Signaling PME with IRQ 115 [ 1.904330] pcieport 0000:00:1c.2: Signaling PME with IRQ 116 [ 1.904385] pcieport 0000:00:1c.3: Signaling PME with IRQ 117 [ 1.904489] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ [ 1.904725] efifb: probing for efifb [ 1.904762] efifb: framebuffer at 0x80000000, using 3072k, total 3072k [ 1.904770] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.904775] efifb: scrolling: redraw [ 1.904781] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.910868] Console: switching to colour frame buffer device 128x48 [ 1.916794] fb0: EFI VGA frame buffer device [ 1.916871] intel_idle: MWAIT substates: 0x33000020 [ 1.916873] intel_idle: v0.4.1 model 0x4C [ 1.917238] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.917527] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.917656] ACPI: Power Button [PWRB] [ 1.917807] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 1.917925] ACPI: Sleep Button [SLPB] [ 1.918055] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.918208] ACPI: Power Button [PWRF] [ 1.924865] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.943781] hpet: number irqs doesn't agree with number of timers [ 1.944365] Linux agpgart interface v0.103 [ 1.949741] loop: module loaded [ 1.950264] libphy: Fixed MDIO Bus: probed [ 1.950320] tun: Universal TUN/TAP device driver, 1.6 [ 1.950525] PPP generic driver version 2.4.2 [ 1.950692] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.950779] ehci-pci: EHCI PCI platform driver [ 1.950866] ehci-platform: EHCI generic platform driver [ 1.950954] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.951034] ohci-pci: OHCI PCI platform driver [ 1.951110] ohci-platform: OHCI generic platform driver [ 1.951190] uhci_hcd: USB Universal Host Controller Interface driver [ 1.951714] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.951795] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.955422] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001509810 [ 1.957900] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.958230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.960728] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.963199] usb usb1: Product: xHCI Host Controller [ 1.965648] usb usb1: Manufacturer: Linux 4.15.0-70201911261949-generic xhci-hcd [ 1.968136] usb usb1: SerialNumber: 0000:00:14.0 [ 1.971478] hub 1-0:1.0: USB hub found [ 1.974044] hub 1-0:1.0: 7 ports detected [ 1.978036] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.980505] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.982958] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.985499] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.987977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.990493] usb usb2: Product: xHCI Host Controller [ 1.992991] usb usb2: Manufacturer: Linux 4.15.0-70201911261949-generic xhci-hcd [ 1.995551] usb usb2: SerialNumber: 0000:00:14.0 [ 1.999033] hub 2-0:1.0: USB hub found [ 2.001692] hub 2-0:1.0: 6 ports detected [ 2.005750] i8042: PNP: No PS/2 controller found. [ 2.008999] mousedev: PS/2 mouse device common for all mice [ 2.014735] rtc_cmos 00:00: RTC can wake from S4 [ 2.018144] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 2.020789] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram [ 2.023332] i2c /dev entries driver [ 2.025983] device-mapper: uevent: version 1.0.3 [ 2.029428] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.031975] intel_pstate: Intel P-state driver initializing [ 2.035894] ledtrig-cpu: registered to indicate activity on CPUs [ 2.037933] EFI Variables Facility v0.08 2004-May-17 [ 2.047666] NET: Registered protocol family 10 [ 2.068485] Segment Routing with IPv6 [ 2.070536] NET: Registered protocol family 17 [ 2.072942] Key type dns_resolver registered [ 2.075904] mce: Using 6 MCE banks [ 2.077806] RAS: Correctable Errors collector initialized. [ 2.079761] microcode: sig=0x406c3, pf=0x1, revision=0x368 [ 2.082475] microcode: Microcode Update Driver: v2.2. [ 2.082514] sched_clock: Marking stable (2082396348, 0)->(2063431000, 18965348) [ 2.088247] registered taskstats version 1 [ 2.090179] Loading compiled-in X.509 certificates [ 2.101085] Loaded X.509 cert 'Build time autogenerated kernel key: a2e385bf04403e81d6365deee40184ae8bcb8d89' [ 2.112025] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring [ 2.116713] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring [ 2.121046] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 2.125591] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 2.130831] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring [ 2.135922] Couldn't get size: 0x800000000000000e [ 2.138361] MODSIGN: Couldn't get UEFI MokListRT [ 2.141036] zswap: loaded using pool lzo/zbud [ 2.159605] Key type big_key registered [ 2.162291] Key type trusted registered [ 2.173204] Key type encrypted registered [ 2.175607] AppArmor: AppArmor sha1 policy hashing enabled [ 2.178017] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.180433] ima: Allocated hash algorithm: sha1 [ 2.182856] evm: HMAC attrs: 0x1 [ 2.185896] Magic number: 11:608:865 [ 2.188853] rtc_cmos 00:00: setting system clock to 2019-11-27 02:51:36 UTC (1574823096) [ 2.191608] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.194060] EDD information not available. [ 2.216777] Freeing unused kernel image memory: 2432K [ 2.240649] Write protecting the kernel read-only data: 20480k [ 2.245935] Freeing unused kernel image memory: 2008K [ 2.249828] Freeing unused kernel image memory: 1884K [ 2.273511] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.276304] x86/mm: Checking user space page tables [ 2.299185] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.312154] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 2.467000] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610 [ 2.469450] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.471855] usb 1-5: Product: USB2.0 Hub [ 2.475259] hub 1-5:1.0: USB hub found [ 2.478299] hub 1-5:1.0: 4 ports detected [ 2.591175] hidraw: raw HID events driver (C) Jiri Kosina [ 2.653475] ahci 0000:00:13.0: version 3.0 [ 2.663489] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.663979] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.668532] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst [ 2.674804] scsi host0: ahci [ 2.682148] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 30:5a:3a:09:00:29, XID 14100800 IRQ 120 [ 2.684787] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.687597] SSE version of gcm_enc/dec engaged. [ 2.690281] scsi host1: ahci [ 2.692954] ata1: SATA max UDMA/133 abar m2048@0x91311000 port 0x91311100 irq 119 [ 2.695528] ata2: SATA max UDMA/133 abar m2048@0x91311000 port 0x91311180 irq 119 [ 2.748064] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.776346] usb 1-5.2: new high-speed USB device number 3 using xhci_hcd [ 2.819036] [drm] Memory usable by graphics device = 2048M [ 2.821384] checking generic (80000000 300000) vs hw (80000000 10000000) [ 2.821385] fb: switching to inteldrmfb from EFI VGA [ 2.823561] Console: switching to colour dummy device 80x25 [ 2.823858] [drm] Replacing VGA console driver [ 2.824182] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.824189] [drm] Driver supports precise vblank timestamp query. [ 2.836722] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.861512] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0 [ 2.864598] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.865323] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 2.865551] [drm] HDaudio controller not detected, using LPE audio instead [ 2.896434] usb 1-5.2: New USB device found, idVendor=15f4, idProduct=0131 [ 2.896452] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.896464] usb 1-5.2: Product: dvbt2 [ 2.896470] usb 1-5.2: Manufacturer: astrometadvbt2 [ 2.984044] usb 1-5.3: new low-speed USB device number 4 using xhci_hcd [ 3.016578] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.016619] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.018620] ata2.00: ATA-8: TOSHIBA HDWD130, MX6OACF0, max UDMA/133 [ 3.018636] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.020777] ata2.00: configured for UDMA/133 [ 3.039747] ata1.00: HPA detected: current 234439535, native 234441648 [ 3.039812] ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133 [ 3.039823] ata1.00: 234439535 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 3.045665] ata1.00: configured for UDMA/133 [ 3.046330] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5 [ 3.047424] sd 0:0:0:0: [sda] 234439535 512-byte logical blocks: (120 GB/112 GiB) [ 3.047462] sd 0:0:0:0: [sda] Write Protect is off [ 3.047470] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.047520] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.047577] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.048618] scsi 1:0:0:0: Direct-Access ATA TOSHIBA HDWD130 ACF0 PQ: 0 ANSI: 5 [ 3.049514] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.049543] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.049555] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.049596] sd 1:0:0:0: [sdb] Write Protect is off [ 3.049604] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.049663] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.051349] sda: sda1 sda2 sda3 [ 3.052621] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.091901] sdb: sdb1 sdb2 [ 3.092580] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.134503] usb 1-5.3: New USB device found, idVendor=04f3, idProduct=0103 [ 3.134522] usb 1-5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.149757] usbcore: registered new interface driver usbhid [ 3.149773] usbhid: USB HID core driver [ 3.156108] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.0/0003:04F3:0103.0001/input/input4 [ 3.156467] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:14.0-5.3/input0 [ 3.156823] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.1/0003:04F3:0103.0002/input/input5 [ 3.157242] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:14.0-5.3/input1 [ 3.220377] usb 1-5.4: new full-speed USB device number 5 using xhci_hcd [ 3.323028] usb 1-5.4: New USB device found, idVendor=1a86, idProduct=7523 [ 3.323078] usb 1-5.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.323089] usb 1-5.4: Product: USB2.0-Serial [ 3.385642] fbcon: inteldrmfb (fb0) is primary device [ 3.495471] Console: switching to colour frame buffer device 240x67 [ 3.518581] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.670475] random: fast init done [ 3.703531] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.703575] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 3.703667] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.232388] raid6: sse2x1 gen() 2990 MB/s [ 4.280331] raid6: sse2x1 xor() 2156 MB/s [ 4.328336] raid6: sse2x2 gen() 2879 MB/s [ 4.376297] raid6: sse2x2 xor() 2389 MB/s [ 4.424311] raid6: sse2x4 gen() 3955 MB/s [ 4.472295] raid6: sse2x4 xor() 1896 MB/s [ 4.472343] raid6: using algorithm sse2x4 gen() 3955 MB/s [ 4.472397] raid6: .... xor() 1896 MB/s, rmw enabled [ 4.472446] raid6: using ssse3x2 recovery algorithm [ 4.475948] xor: measuring software checksum speed [ 4.516296] prefetch64-sse: 6444.000 MB/sec [ 4.556461] generic_sse: 6020.000 MB/sec [ 4.556507] xor: using function: prefetch64-sse (6444.000 MB/sec) [ 4.559807] async_tx: api initialized (async) [ 4.907278] Btrfs loaded, crc32c=crc32c-intel [ 5.071910] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 5.456676] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.490607] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.509202] systemd[1]: Detected architecture x86-64. [ 5.526419] systemd[1]: Set hostname to . [ 5.763210] systemd[1]: Created slice System Slice. [ 5.772850] systemd[1]: Listening on udev Control Socket. [ 5.782076] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.791743] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.801460] systemd[1]: Listening on Journal Audit Socket. [ 5.810913] systemd[1]: Listening on udev Kernel Socket. [ 5.820328] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.958196] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 6.017603] Loading iSCSI transport class v2.0-870. [ 6.041271] iscsi: registered transport (tcp) [ 6.146364] iscsi: registered transport (iser) [ 6.247630] systemd-journald[464]: Received request to flush runtime journal from PID 1 [ 7.199526] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.252552] Bluetooth: Core ver 2.22 [ 7.252590] NET: Registered protocol family 31 [ 7.252591] Bluetooth: HCI device and connection manager initialized [ 7.252604] Bluetooth: HCI socket layer initialized [ 7.252610] Bluetooth: L2CAP socket layer initialized [ 7.252621] Bluetooth: SCO socket layer initialized [ 7.316543] parport_pc 00:03: reported by Plug and Play ACPI [ 7.540531] asus_wmi: ASUS WMI generic driver loaded [ 7.544389] asus_wmi: Initialization: 0x0 [ 7.544505] asus_wmi: BIOS WMI version: 0.9 [ 7.544717] asus_wmi: SFUN value: 0x0 [ 7.561356] mc: Linux media interface: v0.10 [ 7.564459] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6 [ 7.565135] asus_wmi: Number of fans: 1 [ 7.599546] Bluetooth: HCI UART driver ver 2.3 [ 7.599551] Bluetooth: HCI UART protocol H4 registered [ 7.599553] Bluetooth: HCI UART protocol BCSP registered [ 7.599760] Bluetooth: HCI UART protocol LL registered [ 7.599762] Bluetooth: HCI UART protocol ATH3K registered [ 7.599764] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 7.599824] Bluetooth: HCI UART protocol Intel registered [ 7.599880] Bluetooth: HCI UART protocol Broadcom registered [ 7.599881] Bluetooth: HCI UART protocol QCA registered [ 7.599883] Bluetooth: HCI UART protocol AG6XX registered [ 7.599884] Bluetooth: HCI UART protocol Marvell registered [ 7.611601] usbcore: registered new interface driver usbserial_generic [ 7.611624] usbserial: USB Serial support registered for generic [ 7.615368] videodev: Linux video capture interface: v2.00 [ 7.615373] WARNING: You are using an experimental version of the media stack. As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production. Use it with care. Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): 3ff3a712a9eabb3d7bf52c263dd1ece054345df4 media: ti-vpe: vpe: don't rely on colorspace member for conversion b373f84d77e1c409aacb4ff5bb5726c45fc8b166 media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info d5a897c8428b38053df4b427a4277b1a0722bfa0 media: v4l2-common: add pixel encoding support [ 7.637746] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input7 [ 7.637887] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input8 [ 7.638454] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input9 [ 7.701955] usbcore: registered new interface driver ch341 [ 7.701981] usbserial: USB Serial support registered for ch341-uart [ 7.702015] ch341 1-5.4:1.0: ch341-uart converter detected [ 7.710424] usb 1-5.4: ch341-uart converter now attached to ttyUSB0 [ 7.733541] WARNING: You are using an experimental version of the media stack. As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production. Use it with care. Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): 3ff3a712a9eabb3d7bf52c263dd1ece054345df4 media: ti-vpe: vpe: don't rely on colorspace member for conversion b373f84d77e1c409aacb4ff5bb5726c45fc8b166 media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info d5a897c8428b38053df4b427a4277b1a0722bfa0 media: v4l2-common: add pixel encoding support [ 7.853849] WARNING: You are using an experimental version of the media stack. As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production. Use it with care. Latest git patches (needed if you report a bug to linux-media@vger.kernel.org): 3ff3a712a9eabb3d7bf52c263dd1ece054345df4 media: ti-vpe: vpe: don't rely on colorspace member for conversion b373f84d77e1c409aacb4ff5bb5726c45fc8b166 media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info d5a897c8428b38053df4b427a4277b1a0722bfa0 media: v4l2-common: add pixel encoding support [ 7.935848] cx88xx: func 1: Can't get MMIO memory @ 0x0, subsystem: 0070:6902 [ 7.939286] ------------[ cut here ]------------ [ 7.939289] Trying to free already-free IRQ 0 [ 7.939313] WARNING: CPU: 1 PID: 514 at /home/tricky/brad/ubuntu-bionic/kernel/irq/manage.c:1633 free_irq+0xab/0x2d0 [ 7.939314] Modules linked in: cx8800(+) cx88_alsa(+) kvm cx88xx dvb_core tveeprom irqbypass videobuf2_dma_sg rc_core videobuf2_vmalloc punit_atom_debug videobuf2_v4l2 videobuf2_memops intel_cstate videobuf2_common ch341 snd_hdmi_lpe_audio joydev input_leds videodev usbserial hci_uart mc snd_pcm eeepc_wmi asus_wmi sparse_keymap btbcm snd_timer wmi_bmof snd btqca parport_pc soundcore btintel parport bluetooth mei_txe pwm_lpss_platform mei pwm_lpss shpchp lpc_ich intel_int0002_vgpio ecdh_generic rfkill_gpio mac_hid sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid [ 7.939394] i915 i2c_algo_bit crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel pcbc syscopyarea sysfillrect aesni_intel sysimgblt aes_x86_64 fb_sys_fops r8169 crypto_simd glue_helper cryptd drm mii ahci libahci wmi video i2c_hid hid [ 7.939423] CPU: 1 PID: 514 Comm: systemd-udevd Not tainted 4.15.0-70201911261949-generic #1+mediatree+hauppauge [ 7.939424] Hardware name: ASUS All Series/N3150M-E, BIOS 0304 06/09/2015 [ 7.939428] RIP: 0010:__free_irq+0xab/0x2d0 [ 7.939430] RSP: 0018:ffff9e6701283900 EFLAGS: 00010086 [ 7.939432] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 [ 7.939434] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff8c6cffc96490 [ 7.939435] RBP: ffff9e6701283938 R08: 00000000000002d9 R09: 0000000000000004 [ 7.939437] R10: 0000000000000040 R11: 0000000000000001 R12: ffff8c6cf75384a4 [ 7.939438] R13: 0000000000000000 R14: ffff8c6cf7538400 R15: ffff8c6cf46bd878 [ 7.939441] FS: 00007fe40760e680(0000) GS:ffff8c6cffc80000(0000) knlGS:0000000000000000 [ 7.939442] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.939444] CR2: 00007ffeaaea1ea8 CR3: 000000026ea06000 CR4: 00000000001006e0 [ 7.939445] Call Trace: [ 7.939455] free_irq+0x3c/0x90 [ 7.939465] snd_cx88_dev_free+0x20/0x40 [cx88_alsa] [ 7.939476] release_card_device+0x4c/0xa0 [snd] [ 7.939481] device_release+0x35/0x90 [ 7.939485] kobject_release+0x6a/0x180 [ 7.939488] kobject_put+0x28/0x50 [ 7.939491] put_device+0x17/0x20 [ 7.939496] snd_card_free+0x67/0x90 [snd] [ 7.939501] cx88_audio_initdev+0x1b3/0x4e0 [cx88_alsa] [ 7.939506] local_pci_probe+0x47/0xa0 [ 7.939509] pci_device_probe+0x10e/0x1c0 [ 7.939513] driver_probe_device+0x30c/0x490 [ 7.939516] driver_attach+0xcc/0xf0 [ 7.939519] ? driver_probe_device+0x490/0x490 [ 7.939521] bus_for_each_dev+0x70/0xc0 [ 7.939524] driver_attach+0x1e/0x20 [ 7.939526] bus_add_driver+0x1c7/0x270 [ 7.939529] ? 0xffffffffc07c5000 [ 7.939532] driver_register+0x60/0xe0 [ 7.939534] ? 0xffffffffc07c5000 [ 7.939537] pci_register_driver+0x5a/0x60 [ 7.939540] cx88_audio_pci_driver_init+0x23/0x1000 [cx88_alsa] [ 7.939545] do_one_initcall+0x52/0x19f [ 7.939549] ? __vunmap+0x8e/0xc0 [ 7.939552] ? _cond_resched+0x19/0x40 [ 7.939556] ? kmem_cache_alloc_trace+0x14e/0x1b0 [ 7.939560] ? do_init_module+0x27/0x213 [ 7.939563] do_init_module+0x5f/0x213 [ 7.939567] load_module+0x16bc/0x1f10 [ 7.939572] ? ima_post_read_file+0x96/0xa0 [ 7.939577] SYSC_finit_module+0xfc/0x120 [ 7.939579] ? SYSC_finit_module+0xfc/0x120 [ 7.939583] SyS_finit_module+0xe/0x10 [ 7.939586] do_syscall_64+0x73/0x130 [ 7.939589] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 7.939591] RIP: 0033:0x7fe407128839 [ 7.939593] RSP: 002b:00007fff8c777968 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 7.939595] RAX: ffffffffffffffda RBX: 0000556417462410 RCX: 00007fe407128839 [ 7.939597] RDX: 0000000000000000 RSI: 000055641746be60 RDI: 0000000000000015 [ 7.939598] RBP: 000055641746be60 R08: 0000000000000000 R09: 0000556417462410 [ 7.939599] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000000000 [ 7.939601] R13: 0000556417467b60 R14: 0000000000020000 R15: 0000000000000000 [ 7.939603] Code: 39 7a 08 75 0e e9 ed 01 00 00 4c 39 7b 08 74 5a 48 89 da 48 8b 5a 18 48 85 db 75 ee 44 89 ee 48 c7 c7 10 4a ad a6 e8 55 a9 f9 ff <0f> 0b 48 8b 75 c8 4c 89 e7 e8 b7 84 8c 00 49 8b 46 40 48 8b 80 [ 7.939654] ---[ end trace cf405ee9b7cad093 ]--- [ 7.940577] BUG: unable to handle kernel NULL pointer dereference at 0000000000000380 [ 7.943965] IP: cx88_core_put+0xa/0x100 [cx88xx] [ 7.947320] PGD 0 P4D 0 [ 7.950679] Oops: 0000 [#1] SMP PTI [ 7.954021] Modules linked in: dvb_usb_v2 cx8800(+) cx88_alsa(+) kvm cx88xx dvb_core tveeprom irqbypass videobuf2_dma_sg rc_core videobuf2_vmalloc punit_atom_debug videobuf2_v4l2 videobuf2_memops intel_cstate videobuf2_common ch341 snd_hdmi_lpe_audio joydev input_leds videodev usbserial hci_uart mc snd_pcm eeepc_wmi asus_wmi sparse_keymap btbcm snd_timer wmi_bmof snd btqca parport_pc soundcore btintel parport bluetooth mei_txe pwm_lpss_platform mei pwm_lpss shpchp lpc_ich intel_int0002_vgpio ecdh_generic rfkill_gpio mac_hid sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic [ 7.969223] usbhid i915 i2c_algo_bit crct10dif_pclmul crc32_pclmul drm_kms_helper ghash_clmulni_intel pcbc syscopyarea sysfillrect aesni_intel sysimgblt aes_x86_64 fb_sys_fops r8169 crypto_simd glue_helper cryptd drm mii ahci libahci wmi video i2c_hid hid [ 7.977555] CPU: 1 PID: 514 Comm: systemd-udevd Tainted: G W 4.15.0-70201911261949-generic #1+mediatree+hauppauge [ 7.981847] Hardware name: ASUS All Series/N3150M-E, BIOS 0304 06/09/2015 [ 7.986060] RIP: 0010:cx88_core_put+0xa/0x100 [cx88xx] [ 7.990290] RSP: 0018:ffff9e6701283958 EFLAGS: 00010246 [ 7.994525] RAX: 0000000000000000 RBX: ffff8c6cf46bd878 RCX: 0000000000000000 [ 7.998789] RDX: ffff8c6ceea0ab00 RSI: 0000000000000000 RDI: 0000000000000000 [ 8.003082] RBP: ffff9e6701283960 R08: 00000000000002d9 R09: 0000000000000004 [ 8.007409] R10: 0000000000000040 R11: 0000000000000001 R12: ffff8c6cf46bd530 [ 8.011727] R13: 0000000000000000 R14: ffff8c6cea8b2c10 R15: 0000000000000000 [ 8.016062] FS: 00007fe40760e680(0000) GS:ffff8c6cffc80000(0000) knlGS:0000000000000000 [ 8.020415] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.024762] CR2: 00007feb72b04398 CR3: 000000026ea06000 CR4: 00000000001006e0 [ 8.029142] Call Trace: [ 8.033558] snd_cx88_dev_free+0x2c/0x40 [cx88_alsa] [ 8.037997] release_card_device+0x4c/0xa0 [snd] [ 8.042401] device_release+0x35/0x90 [ 8.046797] kobject_release+0x6a/0x180 [ 8.051205] kobject_put+0x28/0x50 [ 8.055582] put_device+0x17/0x20 [ 8.059914] snd_card_free+0x67/0x90 [snd] [ 8.064222] cx88_audio_initdev+0x1b3/0x4e0 [cx88_alsa] [ 8.068534] local_pci_probe+0x47/0xa0 [ 8.072861] pci_device_probe+0x10e/0x1c0 [ 8.077164] driver_probe_device+0x30c/0x490 [ 8.081456] driver_attach+0xcc/0xf0 [ 8.085728] ? driver_probe_device+0x490/0x490 [ 8.090015] bus_for_each_dev+0x70/0xc0 [ 8.094301] driver_attach+0x1e/0x20 [ 8.098564] bus_add_driver+0x1c7/0x270 [ 8.098569] ? 0xffffffffc07c5000 [ 8.098571] driver_register+0x60/0xe0 [ 8.098573] ? 0xffffffffc07c5000 [ 8.098577] __pci_register_driver+0x5a/0x60 [ 8.098584] cx88_audio_pci_driver_init+0x23/0x1000 [cx88_alsa] [ 8.098589] do_one_initcall+0x52/0x19f [ 8.098593] ? __vunmap+0x8e/0xc0 [ 8.098597] ? _cond_resched+0x19/0x40 [ 8.098600] ? kmem_cache_alloc_trace+0x14e/0x1b0 [ 8.098604] ? do_init_module+0x27/0x213 [ 8.098607] do_init_module+0x5f/0x213 [ 8.098610] load_module+0x16bc/0x1f10 [ 8.098616] ? ima_post_read_file+0x96/0xa0 [ 8.098624] SYSC_finit_module+0xfc/0x120 [ 8.159244] ? SYSC_finit_module+0xfc/0x120 [ 8.163025] SyS_finit_module+0xe/0x10 [ 8.166754] do_syscall_64+0x73/0x130 [ 8.170441] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 8.174128] RIP: 0033:0x7fe407128839 [ 8.177760] RSP: 002b:00007fff8c777968 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 8.181316] RAX: ffffffffffffffda RBX: 0000556417462410 RCX: 00007fe407128839 [ 8.184887] RDX: 0000000000000000 RSI: 000055641746be60 RDI: 0000000000000015 [ 8.188457] RBP: 000055641746be60 R08: 0000000000000000 R09: 0000556417462410 [ 8.191992] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000000000 [ 8.195481] R13: 0000556417467b60 R14: 0000000000020000 R15: 0000000000000000 [ 8.198926] Code: 5c 5d c3 48 c7 c7 c0 21 85 c0 31 db e8 b0 7c b7 e5 eb e8 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 53 <48> 8b 86 80 03 00 00 48 89 fb 48 8b 96 88 03 00 00 48 85 c0 75 [ 8.202597] RIP: cx88_core_put+0xa/0x100 [cx88xx] RSP: ffff9e6701283958 [ 8.206245] CR2: 0000000000000380 [ 8.206413] ---[ end trace cf405ee9b7cad094 ]--- [ 8.214875] usb 1-5.2: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state [ 8.303664] intel_rapl: Found RAPL domain package [ 8.307428] intel_rapl: Found RAPL domain core [ 8.371317] usb 1-5.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 8.371333] dvbdev: DVB: registering new adapter (Astrometa DVB-T2) [ 8.371338] usb 1-5.2: media controller created [ 8.371840] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ 8.396791] i2c i2c-9: Added multiplexed i2c bus 10 [ 8.396794] rtl2832 9-0010: Realtek RTL2832 successfully attached [ 8.412358] ppdev: user-space parallel port driver [ 8.415333] i2c i2c-9: cxd2841er_attach(): I2C adapter (ptrval) SLVX addr 6e SLVT addr 6c [ 8.428076] i2c i2c-9: cxd2841er_attach(): attaching CXD2837ER DVB-C/T/T2 frontend [ 8.431098] i2c i2c-9: cxd2841er_attach(): chip ID 0xb1 OK. [ 8.438060] usb 1-5.2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ 8.449323] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ 8.454923] usb 1-5.2: DVB: registering adapter 0 frontend 1 (Sony CXD2837ER DVB-T/T2/C demodulator)... [ 8.464339] dvbdev: dvb_create_media_entity: media entity 'Sony CXD2837ER DVB-T/T2/C demodulator' registered. [ 8.507915] r820t 10-003a: creating new instance [ 8.514826] r820t 10-003a: Rafael Micro r820t successfully identified [ 8.514842] r820t 10-003a: attaching existing instance [ 8.533068] r820t 10-003a: Rafael Micro r820t successfully identified [ 8.559278] Adding 8167420k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-2 extents:1 across:8167420k SSFS [ 8.569513] rtl2832_sdr rtl2832_sdr.1.auto: Registered as swradio0 [ 8.572956] rtl2832_sdr rtl2832_sdr.1.auto: Realtek RTL2832 SDR attached [ 8.576277] rtl2832_sdr rtl2832_sdr.1.auto: SDR API is still slightly experimental and functionality changes may follow [ 8.632064] Registered IR keymap rc-astrometa-t2hybrid [ 8.641679] IR NEC protocol handler initialized [ 8.668271] rc rc0: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/rc/rc0 [ 8.673159] input: Astrometa DVB-T2 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/rc/rc0/input10 [ 8.677350] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ 8.684167] usb 1-5.2: dvb_usb_v2: schedule remote query interval to 200 msecs [ 8.702532] usb 1-5.2: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected [ 8.702680] usbcore: registered new interface driver dvb_usb_rtl28xxu [ 8.706617] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 8.713332] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 9.742883] audit: type=1400 audit(1574823104.048:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=860 comm="apparmor_parser" [ 9.850459] audit: type=1400 audit(1574823104.156:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=864 comm="apparmor_parser" [ 9.864702] random: crng init done [ 9.868186] random: 7 urandom warning(s) missed due to ratelimiting [ 9.986038] audit: type=1400 audit(1574823104.292:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=861 comm="apparmor_parser" [ 9.989879] audit: type=1400 audit(1574823104.292:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=861 comm="apparmor_parser" [ 9.993693] audit: type=1400 audit(1574823104.296:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=861 comm="apparmor_parser" [ 10.387169] audit: type=1400 audit(1574823104.692:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=858 comm="apparmor_parser" [ 10.390877] audit: type=1400 audit(1574823104.696:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=858 comm="apparmor_parser" [ 10.394559] audit: type=1400 audit(1574823104.696:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=858 comm="apparmor_parser" [ 10.399835] audit: type=1400 audit(1574823104.696:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=858 comm="apparmor_parser" [ 10.404096] audit: type=1400 audit(1574823104.700:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=868 comm="apparmor_parser" [ 11.734339] new mount options do not match the existing superblock, will be ignored [ 11.758638] r8169 0000:02:00.0 enp2s0: link down [ 11.758642] r8169 0000:02:00.0 enp2s0: link down [ 11.765076] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 15.561852] r8169 0000:02:00.0 enp2s0: link up [ 15.564755] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 131.479883] kauditd_printk_skb: 8 callbacks suppressed [ 131.479888] audit: type=1400 audit(1574823225.820:20): apparmor="DENIED" operation="capable" profile="/sbin/dhclient" pid=1254 comm="dhclient" capability=16 capname="sys_module" [ 258.002119] usb 1-5.2: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000) [ 258.801767] usb 1-5.2: DVB: adapter 0 frontend 1 frequency 0 out of range (42000000..1002000000)

LordTricky commented 4 years ago

lspci -v 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Flags: medium devsel, IRQ 19 Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel modules: cx8800

04:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Flags: bus master, medium devsel, latency 32, IRQ 19 Capabilities: [4c] Power Management version 2 Kernel driver in use: cx88_audio Kernel modules: cx88_alsa

04:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Flags: medium devsel, IRQ 10 Capabilities: [4c] Power Management version 2 Kernel modules: cx8802

04:00.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Flags: medium devsel, IRQ 10 Capabilities: [4c] Power Management version 2

surely i'm missing something simple?

LordTricky commented 4 years ago

i'm really having no joy with this, is there any way i can still get the pre deprecated files that did work for me? please?

LordTricky commented 4 years ago

Sorry to pester but i'm still having no joy even after a fresh install of ubuntu 18.04 on a spare ssd. I'm starting to think the problem could be around the pci to pcie adapter i have the hdr4000 in. I'm also thinking i need to do something with "setpci" but i can't get my head around it. Can you make any suggestions please?

lspci -vv 02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=02, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities:

03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR+ INTx- Interrupt: pin A routed to IRQ 17 Capabilities: Kernel modules: cx8800

03:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR+ INTx- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Capabilities: Kernel driver in use: cx88_audio Kernel modules: cx88_alsa

03:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR+ INTx- Interrupt: pin A routed to IRQ 3 Capabilities: Kernel modules: cx8802

03:00.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) Subsystem: Hauppauge computer works Inc. WinTV HVR-4000-HD Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR+ INTx- Interrupt: pin A routed to IRQ 3 Capabilities:

b-rad-NDi commented 4 years ago

For me to further address this issue you will have to start running a mainline kernel. If you refile this issue on my media_tree repository I will assist you there with the cx88 issues.

b-rad-NDi commented 4 years ago

Also, I have no idea about pci to pcie converters or issues associated with them. I'd have to look that up

LordTricky commented 4 years ago

no worries, i have since done a fresh install on spare ssd of ubuntu 18.04, ubuntu 19.10 and ubuntu 16.04, all of which gave me no positive results. I currently have a mainline kernel running on my ubuntu 18.04 (original setup) 5.4.1-050401-generic.

I have also tested the HVR4000 in a windows machine and that is still working, i also tried it with the pci to pcie adaptor and had no success, i'm not sure if this is windows driver related or not, but i have now ordered a new pci to pcie adaptor to rule it out, new one should be here in about 3 weeks (damn china post).

I will update once the new pci to pcie adaptor arrives, its strange because both windows and linux see the adaptor, but only linux see's the HVR4000 in the adaptor. if you are interested the adaptor is ASM1083 https://linux-hardware.org/index.php?id=pci:1b21-1080-1043-8489&page=6

Thank you once more for your help.

b-rad-NDi commented 4 years ago

The fact it worked once upon a time seems to indicate a regression introduced somewhere. If that regression is not easy to determine then the only solution is to do a kernel bisect via git. Essentially you go back in the past on mainline, compile and test that (hoping it works as a baseline), then do a binary search from there to tip to determine where the regression was introduced. It's tedious, but not terribly so.

LordTricky commented 4 years ago

I owe you an apology, i'm very sorry. My new pci to pci-e adaptor has now arrived and my HVR4000 is working as expected once more. It seems it was just coincidental that the old one broke around the time of the last update. Thank you for your help in the matter. This issue can now be closed.

b-rad-NDi commented 4 years ago

d'oh! It happens, glad to hear you're back in order.

LordTricky commented 4 years ago

Hi Brad, me again. I have bought a motorised dish and i'm struggling to get some satellites 16E being the main 1 i want, but i'm running into apparent driver problems.

this is the output from w_scan for 27.5W trying 'S f = 3714 kHz L SR = 2915 7/8 0,35 QPSK (0:0:0)' (time: 00:13.223) skipped: (freq 6.04 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 3714 kHz L SR = 2915 7/8 0,35 QPSK (0:0:0) trying 'S f = 3715 kHz R SR = 12000 1/2 0,35 QPSK (0:0:0)' (time: 00:14.120) skipped: (freq 6.04 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 3715 kHz R SR = 12000 1/2 0,35 QPSK (0:0:0) trying 'S f = 3764 kHz R SR = 24450 3/4 0,35 QPSK (0:0:0)' (time: 00:15.028) skipped: (freq 5.99 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 3764 kHz R SR = 24450 3/4 0,35 QPSK (0:0:0) trying 'S f = 3829 kHz R SR = 5787 3/4 0,35 QPSK (0:0:0)' (time: 00:15.924) skipped: (freq 5.92 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 3829 kHz R SR = 5787 3/4 0,35 QPSK (0:0:0) trying 'S f = 3838 kHz R SR = 7223 3/4 0,35 QPSK (0:0:0)' (time: 00:16.832) skipped: (freq 5.91 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 3838 kHz R SR = 7223 3/4 0,35 QPSK (0:0:0) trying 'S f = 3898 kHz R SR = 2893 3/4 0,35 QPSK (0:0:0)' (time: 00:17.752) skipped: (freq 5.85 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 3898 kHz R SR = 2893 3/4 0,35 QPSK (0:0:0) trying 'S f = 3936 kHz R SR = 4550 1/2 0,35 QPSK (0:0:0)' (time: 00:18.660) skipped: (freq 5.81 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 3936 kHz R SR = 4550 1/2 0,35 QPSK (0:0:0) trying 'S f = 4048 kHz R SR = 7000 3/4 0,35 QPSK (0:0:0)' (time: 00:19.576) skipped: (freq 5.70 unsupported by driver: min=0.95, max=2.15)

initial_tune:2813: Setting frontend failed S f = 4048 kHz R SR = 7000 3/4 0,35 QPSK (0:0:0) trying 'S2 f = 11495 kHz V SR = 44100 9/10 0,AUTO QPSK (0:0:0)' (time: 00:20.525) trying 'S f = 11666 kHz V SR = 9765 5/6 0,35 QPSK (0:0:0)' (time: 00:23.433)

And 16E trying 'S f = 11070 kHz H SR = 333 1/2 0,35 QPSK (0:0:0)' (time: 00:58.434) skipped: (srate 333000 unsupported by driver)

initial_tune:2813: Setting frontend failed S f = 11070 kHz H SR = 333 1/2 0,35 QPSK (0:0:0)

Is this a hardware limitation? or is it just that the driver is not yet built to support these other satellites?

I really don't want to be replacing my HVR4000 if i can help it.

b-rad-NDi commented 4 years ago

@LordTricky : this issue slipped by past me due to this issue being closed. If you are still having issue please file a fresh ticket and I'll see if I can get to the bottom of your problem.

b-rad-NDi / Ubuntu-media-tree-kernel-builder

LTS / HWE support. #88

Add the tools.