b0mbays / continuously_casting_dashboards

HACS Integration for continuously casting a Home Assistant dashboard to your Google Chromecast Displays
MIT License
208 stars 9 forks source link

Not working after Updating HA #53

Closed maxakash closed 6 months ago

maxakash commented 6 months ago

Hi @b0mbays I have 7 nest hubs on which casting was working fine. But since I have updated, casting only works on 5-6 nest hubs at a time. Please look into it.

Here is the error from logs image

b0mbays commented 6 months ago

Hey @maxakash I unfortunately don't have more than 5 hubs to test this out on but I'll try and flook into this. I occasionally get timeout errors for a couple of my devices, and a simple restart of HA fixes the casting. I've found i'm doing this maybe one a week. Does your issue get fixed if you do a restart?

maxakash commented 6 months ago

Hi @b0mbays restarting HA fixes the issue but I have to restart couple of times daily. Also I have warning or debus as log, my CPU usage rises to around 90%. Thanks

b0mbays commented 6 months ago

Could you try increasing the cast_delay? What do you have that set to currently?

maxakash commented 6 months ago

Could you try increasing the cast_delay? What do you have that set to currently?

My cast delay is set at 45. I will increase it to 60. I also have one doubt. One day my HA went offline for few hours but HA dashboard stayed casted on the nest hubs. I thought Nest hubs removes casting after 9 mins or so. Can you please tell me why that happened? Thanks

b0mbays commented 6 months ago

Sounds good. This could also just be a network issue.

Why would the hubs remove casting after 9 mins? If there are no interuptions, it will remain. That is what ha-catt-fix does 👍

maxakash commented 6 months ago

But I have noticed that all my nest hubs goes to main screen(showing wallpaper) from HA dashboard and then HA dashboard is recasted within seconds.

b0mbays commented 6 months ago

Closing issue as it's most likely a networking issue. If anyone has is experiencing the same issue, please comment below with your logs and I'll re-open to investigate 👍

maxakash commented 6 months ago

Hi @b0mbays Can I play a sound when doorbell rings while HA is casted on Nest Hubs without interrupting casting? Thanks