search

b3nn0 / stratux

Fork of the original cyoung/stratux with multiple patches for flying in europe
BSD 3-Clause "New" or "Revised" License
139 stars 61 forks source link

No WLAN when setting a secure (password protected) WLAN network in AP+Client mode #285

Open TheMZ2 opened 1 month ago

TheMZ2 commented 1 month ago

  1. Stratux version:

  2. Stratux config:

    SDR

    • [ ] single
    • [ ] dual

    GPS

    • [X] yes
    • [ ] no type:

    AHRS

    • [X] yes
    • [ ] no

    power source: 12V to USB converter

  3. EFB app and version: (e.g., WingX Pro7 8.6.2) Skydemon EFB platform: (e.g., iOS 9.2) IOS 15.8.2 EFB hardware: (e.g., iPad Mini 2) ipad mini 4

  4. Description of your issue: With the new release v1.6r1-eu030 of 7th of April Stratux started showing an abnormal behaviour. The problem starts when in AP+Client mode i add a hotspot with a password and then set a password to the Stratux own WLAN. As long as I don't set a password on Stratux WLAN network everything works as expected. As soon as this password is set the Stratux stops providing the WLAN. Apparently it keeps on working as it stays connected to the hotspot but I can't access the Stratux WLAN and I can't see what the thing is doing or even get a hold on the Logs. I've tried rebooting the system but the only solution i've found is to reflash it. Hope this gives you some hints on what went wrong. Looking forward to a new release. Thank you for providing the software for this mighty little system. Cheers

b3nn0 commented 1 month ago

Unfortunately, I can't seem to reproduce that. Just tried to set it up, set a simple password (12345678) and enabled AP+Client mode. It is now connected to my home network and offers an AP with the given password just fine. Not sure what's going wrong for you.. any other info that might be helpful?

TheMZ2 commented 1 month ago

Unfortunately no further infos. :( Without the ability to get the logs I can only describe the problem like I did. I just saw you released a new version of the SW. I'm going to flash it and see if the problem goes away like it came. version eu029 (original, pre-hotfix1) was working like a dream. The hotfix1 i haven't updated. Then I flashed the eu030 and the problem was there all of a sudden. I'll keep you posted as soon as I flash the eu031. Thanks for the help!! :) Cheers