pepsoon
commented
5 years ago Hi, Connect your TV stick to PC and type in terminal: lsusb Find out if You will see something like that: Bus 003 Device 005: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T.
To add Your TV stick to blacklist you just simply modify blacklist.conf: /etc/modprobe.d/blacklist.conf and on the end paste and write: blacklist dvb_usb_rtl28xxu blacklist rtl2832 blacklist rtl2830
It works in my case.
BR! Piotr
Good afternoon everyone.
I write here to see if any of you know that installation errors I may have had to use the r820t2 in gnu radio companion.
I'm trying to make an FM receiver and other analog TV receiver but when running the program does not receive any type of signal and the view errors, I have: devices not supported. I believe that this is some driver to be installed but I don't know where or how.
The steps that I have followed for installation (Ubuntu 16.04 LTS) have been:
The Stick comes with a CD but i do not know how to install it since, according to the specifications only works for WXP, 2000, Vista, 7 and 8; and it is something that it seems strange to me since I have seen videos where they use this same model of stick to carry out projects in Gnuradio on Ubuntu.
I tried with this:
sudo apt-get update sudo apt-get install git sudo apt-get install cmake sudo apt-get install build-essential sudo apt-get install libusb-1.0-0-dev
git clone git://git.osmocom.org/rtl-sdr.git cd rtl-sdr/ mkdir build cd build cmake ../ -DINSTALL_UDEV_RULES=ON make sudo make install sudo ldconfig sudo cp ../rtl-sdr.rules /etc/udev/rules.d/
Opening /etc/modprobe.d folder Creating a new file 'blacklist-rtl.conf' and add this one line: blacklist dvb_usb_rtl28xxu
rtl_test -t
I tried those commands but I do not know if I need to install something else because GNRC still says: "FATAL: No supported devices found to pick from"...
Please, if any of you know that i need to install It would serve as much help as I am a novice programmer and i need to resolve this problem for my project.