SMAtool 0.15+ gives error "not all codes set"

[GoogleCodeExporter]

What steps will reproduce the problem?
1. compile and use any version above 0.14 
2. Run smatool
3.

What is the expected output? What do you see instead?
SMAtool reports:
root@debian:~/sma-bluetooth-0.16# dir
invcode.in  sma.in.new  smatool.c     smatool.conf.new
mysql.c     smatool     smatool.conf
root@debian:~/sma-bluetooth-0.16# ./smatool

 Error ! not all codes set
*** glibc detected *** ./smatool: double free or corruption (top): 0x00022038 
**                                                                              
                   *
Aborted 

What version of the product are you using? On what operating system?
all above 0.14 give the same error. or I get the error invcode.in missing

Please provide any additional information below.
this is my config file:

# Configuration for smatoool bluetooth inverter logger
#
# Copy this to smatool.conf this is to avoid damaging your
# config on every update
#
# Not all fields are compulsory
#
# Inverter (compulsory) type 1700TL, 2100TL, 3000TL, 3000TLHF, 4000TL, 5000TL, 
10000TL  others not tested
Inverter        5000TL
# Inverter (compulsory bluetooth address) use "hcitool scan" to find
BTAddress       00:80:25:1F:ED:0B
# Inverter Bluetooth timeout (optional) defaults to 5 seconds
BTTimeout
# Inverter User password (compulsory)
Password        0000
# Config file (optional) defaults to ./smatool.conf
Config
# String file (compulsory) data strings to drive the system
File            sma.in.new
# Location (optional) required to avoid waking up system in the dark.
# Requires  mysql below.
Latitude 51.3
Longitude 5.13
# Mysql (optional) required for storing data
MySqlHost       localhost
MySqlDatabase   smatool
MySqlUser       XXXXXX
MySqlPwd        XXXXXX
# PVOutput.org specific data if you are outputting to PVOutput.org.
PVOutputURL     http://pvoutput.org/service/r1/addstatus.jsp
PVOutputKey     Here i put my key.
PVOutputSid     Systemnumber 

Original issue reported on code.google.com by jurgensc...@gmail.com on 16 Jan 2012 at 8:23

[GoogleCodeExporter]

Maybe its worth reporting that i run this on à sheevaplug with latest debian 
distro.

Jurgen

Original comment by jurgensc...@gmail.com on 18 Jan 2012 at 5:36

[GoogleCodeExporter]

I have the exact same error when running the "smatool -v" command on an ARM 
system running Debian Squeeze.

I compiled version 0.17 
I have configured converter type 5000TL, the actual device type I have is SMA 
5000TL21

Original comment by jo.kl...@gmail.com on 13 Mar 2012 at 7:18

[GoogleCodeExporter]

On ARM this seems to be caused by an alignment problem.
echo 3 > /proc/cpu/alignment solves the segfault.

See http://lecs.cs.ucla.edu/wiki/index.php/XScale_alignment

(on a Synology ds207+ nas)

Original comment by m...@peter-vos.net on 22 Apr 2012 at 7:48

[GoogleCodeExporter]

Is there a trick like this for a mips processor?

# cat /proc/cpuinfo 
system type     : Atheros AR7161 rev 2
machine         : NETGEAR WNDR3700/WNDR3800/WNDRMAC
processor       : 0
cpu model       : MIPS 24Kc V7.4
BogoMIPS        : 452.19
wait instruction    : yes
microsecond timers  : yes
tlb_entries     : 16
extra interrupt vector  : yes
hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0e90, 0x0f18, 
0x06e0]
ASEs implemented    : mips16
shadow register sets    : 1
kscratch registers  : 0
core            : 0
VCED exceptions     : not available
VCEI exceptions     : not available

I'm getting the same error on my netgear wndr3700 / OpenWRT.

Original comment by stefan.v...@gmail.com on 28 May 2012 at 7:59

[GoogleCodeExporter]

Could this issue be caused by the compile errors seen in 
https://code.google.com/p/sma-bluetooth/issues/detail?id=75 ?

Is this one similar to it too? https://code.google.com/p/lz4/issues/detail?id=4

Original comment by stefan.v...@gmail.com on 8 Jul 2012 at 8:46

[GoogleCodeExporter]

This patch fixes it on my wndr3700. Thanks to janus44444!

Original comment by stefan.v...@gmail.com on 22 Jul 2012 at 12:06

Attachments:

• smatool.c.diff

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Hello,

On my sheevaplug (with Debian), I have the same problem.

Compilation is OK, but can't launch the program file

root@debian:/home/temp# gcc -lbluetooth -lcurl -lmysqlclient -g -o smatool018 
smatool.c
root@debian:/home/temp# ./smatool018

 Error ! not all codes set
*** glibc detected *** ./smatool018: double free or corruption (top): 
0x00023038 ***
Aborted
root@debian:/home/temp# 

Solved after typing

echo 3 > /proc/cpu/alignment

Thank you!

Original comment by dje...@gmail.com on 1 Sep 2012 at 12:45

[GoogleCodeExporter]

Hi, 

I get the exact same error when using debian on my raspberry pi (B-model) 
trying to communicate with my Sunny Boy 2500HF.

I have made all the changes in invcode.in but I still get "Error ! not all 
codes set"

And I cannot solve anything running echo 3 > /proc/cpu/alignment. Here I get 
the error: "bash: /proc/cpu/alignment: permission denied" (translated).

Can any one tell me how I can align my Raspberry cpu or why I cannot run the 
command?

Br. P. Borg

Original comment by prebenb...@gmail.com on 2 Mar 2013 at 7:01

[GoogleCodeExporter]

Hi 

Now I have solved this part. I had miss spelled the inverter model in my 
smatool.conf file. 25000HF in stead of 2500HF.

But now I have major problems with two different date formats read from the 
inverter. 

2001-02-03 and 3/2/2001. Have anyone seen and solved this issue before?

Br. P.

Original comment by prebenb...@gmail.com on 9 Mar 2013 at 11:33