search

babroval / ford-eec-iv-diagnostic

FORD EEC-IV diagnostic scanner
MIT License
16 stars 7 forks source link

Compatibility #3

Closed JTC1234567 closed 3 years ago

JTC1234567 commented 3 years ago

Hello, this is a great project and in hoping to make it. Any links for getting hold of a 'crumb-128'? As it's difficult to find anyone selling one.

Also i was wondering if there software is compatible with a bit of software someone else made called forddiag? This is an eec-iv diagnostic software but needs a cable with a similar looking PCB (crumb-128).

I'm also having issues with getting the Java software to work. It keeps throwing up various error messages.

Thanks

babroval commented 3 years ago

Hello JTC1234567

Crumb128 can be found at www.chip45.com. This is their product. But could you first tell me your ECU number, engine type and car name, please? And the most important question: Are the two twisted wires coming from pins 18 and 19 of your EEC-IV? Because many EEC-IV non-EU engines do not have DCL diagnostics.

Best wishes

On Fri, 29 Jan 2021, 16:18 JTC1234567, notifications@github.com wrote:

Hello, this is a great project and in hoping to make it. Any links for getting hold of a 'crumb-128'? As it's difficult to find anyone selling one.

Also i was wondering if there software is compatible with a bit of software someone else made called forddiag? This is an eec-iv diagnostic software but needs a cable with a similar looking PCB (crumb-128).

I'm also having issues with getting the Java software to work. It keeps throwing up various error messages.

Thanks

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/babroval/ford-eec-iv-diagnostic/issues/3, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIGTGEJCFK74U44DN25YIL3S4LNWTANCNFSM4WZDR4BQ .

JTC1234567 commented 3 years ago

My model is Mk6 2001 finesse 1.6ltr. I'm not sure on ECU code, would have to pull out and check. It's the latter one with digital display on spedo. I'm pretty sure the pins 18&19 are the dcl connectors as I've looked into diagnostics before (it doesn't have the led flash codes connector on engine bay) but not had much success.

Can I not use the crumb-124 as it's only $15?

babroval commented 3 years ago

Yes, it looks like you have got one of the latest Escorts with DCL. The project was written specifically for Atmega and I don't know other devices, sorry.

On Sun, Jan 31, 2021 at 9:39 AM JTC1234567 notifications@github.com wrote:

My model is Mk6 2001 finesse 1.6ltr. I'm not sure on ECU code, would have to pull out and check. It's the latter one with digital display on spedo. I'm pretty sure the pins 18&19 are the dcl connectors as I've looked into diagnostics before (it doesn't have the led flash codes connector on engine bay) but not had much success.

Can I not use the crumb-124 as it's only $15?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770354252, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIGTGENFJRE6GLRWD4TZLC3S4UQL5ANCNFSM4WZDR4BQ .

JTC1234567 commented 3 years ago

Ah no I mean if you have a look on the link you sent me and search crumb - the cheapest is listed as 'Crumb124 V4 USB RS485 Modul' however when you click on it the description says 'crumb128-4.0'. is that one for 15 euros? Just want to make sure it's the correct one?

I've had issues getting the Java project to work, another chap wrote some software called 'forddiag' which is free but you have to pay for a cable with hardware built in. Would you project be compatible with this as it's just acting as a buffer?

Get Outlook for Androidhttps://aka.ms/ghei36

From: babroval notifications@github.com Sent: Sunday, January 31, 2021 10:12:46 AM To: babroval/ford-eec-iv-diagnostic ford-eec-iv-diagnostic@noreply.github.com Cc: JTC1234567 joeclarke_54@hotmail.com; Author author@noreply.github.com Subject: Re: [babroval/ford-eec-iv-diagnostic] Compatibility (#3)

Yes, it looks like you have got one of the latest Escorts with DCL. The project was written specifically for Atmega and I don't know other devices, sorry.

On Sun, Jan 31, 2021 at 9:39 AM JTC1234567 notifications@github.com wrote:

My model is Mk6 2001 finesse 1.6ltr. I'm not sure on ECU code, would have to pull out and check. It's the latter one with digital display on spedo. I'm pretty sure the pins 18&19 are the dcl connectors as I've looked into diagnostics before (it doesn't have the led flash codes connector on engine bay) but not had much success.

Can I not use the crumb-124 as it's only $15?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770354252, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIGTGENFJRE6GLRWD4TZLC3S4UQL5ANCNFSM4WZDR4BQ .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770358227, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ASUZSBPWANTYYYDOBHANMILS4UUJ5ANCNFSM4WZDR4BQ.

babroval commented 3 years ago

Yes, Crumb124 V4 is correct one. I have removed Crumb128. Take with bootloader and 160,000 MHz quartz. This project is not compatible with other devices. If you wait a couple of weeks, I will make a video on how to program and connect to an ECU.

Cheers

On Sun, Jan 31, 2021 at 10:19 AM JTC1234567 notifications@github.com wrote:

Ah no I mean if you have a look on the link you sent me and search crumb - the cheapest is listed as 'Crumb124 V4 USB RS485 Modul' however when you click on it the description says 'crumb128-4.0'. is that one for 15 euros? Just want to make sure it's the correct one?

I've had issues getting the Java project to work, another chap wrote some software called 'forddiag' which is free but you have to pay for a cable with hardware built in. Would you project be compatible with this as it's just acting as a buffer?

Get Outlook for Androidhttps://aka.ms/ghei36

From: babroval notifications@github.com Sent: Sunday, January 31, 2021 10:12:46 AM To: babroval/ford-eec-iv-diagnostic < ford-eec-iv-diagnostic@noreply.github.com> Cc: JTC1234567 joeclarke_54@hotmail.com; Author < author@noreply.github.com> Subject: Re: [babroval/ford-eec-iv-diagnostic] Compatibility (#3)

Yes, it looks like you have got one of the latest Escorts with DCL. The project was written specifically for Atmega and I don't know other devices, sorry.

On Sun, Jan 31, 2021 at 9:39 AM JTC1234567 notifications@github.com wrote:

My model is Mk6 2001 finesse 1.6ltr. I'm not sure on ECU code, would have to pull out and check. It's the latter one with digital display on spedo. I'm pretty sure the pins 18&19 are the dcl connectors as I've looked into diagnostics before (it doesn't have the led flash codes connector on engine bay) but not had much success.

Can I not use the crumb-124 as it's only $15?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770354252 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AIGTGENFJRE6GLRWD4TZLC3S4UQL5ANCNFSM4WZDR4BQ

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770358227>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ASUZSBPWANTYYYDOBHANMILS4UUJ5ANCNFSM4WZDR4BQ

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770359015, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIGTGEJ7ARWU6RJF2S75EGLS4UVD5ANCNFSM4WZDR4BQ .

JTC1234567 commented 3 years ago

That would be fantastic thank you! I'd really appreciate that as I'm having trouble getting the Java software to run on my pc, it keeps throwing up various errors off I try to run it. Is that not a stand alone exe I can run rather than loading up source code?

Thanks, Joe

Get Outlook for Androidhttps://aka.ms/ghei36

From: babroval notifications@github.com Sent: Sunday, January 31, 2021 11:04:18 AM To: babroval/ford-eec-iv-diagnostic ford-eec-iv-diagnostic@noreply.github.com Cc: JTC1234567 joeclarke_54@hotmail.com; Author author@noreply.github.com Subject: Re: [babroval/ford-eec-iv-diagnostic] Compatibility (#3)

Yes, Crumb124 V4 is correct one. I have removed Crumb128. Take with bootloader and 160,000 MHz quartz. This project is not compatible with other devices. If you wait a couple of weeks, I will make a video on how to program and connect to an ECU.

Cheers

On Sun, Jan 31, 2021 at 10:19 AM JTC1234567 notifications@github.com wrote:

Ah no I mean if you have a look on the link you sent me and search crumb - the cheapest is listed as 'Crumb124 V4 USB RS485 Modul' however when you click on it the description says 'crumb128-4.0'. is that one for 15 euros? Just want to make sure it's the correct one?

I've had issues getting the Java project to work, another chap wrote some software called 'forddiag' which is free but you have to pay for a cable with hardware built in. Would you project be compatible with this as it's just acting as a buffer?

Get Outlook for Androidhttps://aka.ms/ghei36

From: babroval notifications@github.com Sent: Sunday, January 31, 2021 10:12:46 AM To: babroval/ford-eec-iv-diagnostic < ford-eec-iv-diagnostic@noreply.github.com> Cc: JTC1234567 joeclarke_54@hotmail.com; Author < author@noreply.github.com> Subject: Re: [babroval/ford-eec-iv-diagnostic] Compatibility (#3)

Yes, it looks like you have got one of the latest Escorts with DCL. The project was written specifically for Atmega and I don't know other devices, sorry.

On Sun, Jan 31, 2021 at 9:39 AM JTC1234567 notifications@github.com wrote:

My model is Mk6 2001 finesse 1.6ltr. I'm not sure on ECU code, would have to pull out and check. It's the latter one with digital display on spedo. I'm pretty sure the pins 18&19 are the dcl connectors as I've looked into diagnostics before (it doesn't have the led flash codes connector on engine bay) but not had much success.

Can I not use the crumb-124 as it's only $15?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770354252 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AIGTGENFJRE6GLRWD4TZLC3S4UQL5ANCNFSM4WZDR4BQ

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770358227>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ASUZSBPWANTYYYDOBHANMILS4UUJ5ANCNFSM4WZDR4BQ

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770359015, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIGTGEJ7ARWU6RJF2S75EGLS4UVD5ANCNFSM4WZDR4BQ .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770364140, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ASUZSBO4UQYCLUO3SEFCKQ3S4U2LFANCNFSM4WZDR4BQ.

babroval commented 3 years ago

Hello JTC1234567 Thanks for your attention to EEC-IV project.. I have uploaded connection video as you requested: https://youtu.be/0mJQrj8HoHk/ Sorry for not very good video quality, but if you have got any questions, please do not hesitate to ask.

Many thanks Max

On Sun, Jan 31, 2021 at 11:14 AM JTC1234567 notifications@github.com wrote:

That would be fantastic thank you! I'd really appreciate that as I'm having trouble getting the Java software to run on my pc, it keeps throwing up various errors off I try to run it. Is that not a stand alone exe I can run rather than loading up source code?

Thanks, Joe

Get Outlook for Androidhttps://aka.ms/ghei36

From: babroval notifications@github.com Sent: Sunday, January 31, 2021 11:04:18 AM To: babroval/ford-eec-iv-diagnostic < ford-eec-iv-diagnostic@noreply.github.com> Cc: JTC1234567 joeclarke_54@hotmail.com; Author < author@noreply.github.com> Subject: Re: [babroval/ford-eec-iv-diagnostic] Compatibility (#3)

Yes, Crumb124 V4 is correct one. I have removed Crumb128. Take with bootloader and 160,000 MHz quartz. This project is not compatible with other devices. If you wait a couple of weeks, I will make a video on how to program and connect to an ECU.

Cheers

On Sun, Jan 31, 2021 at 10:19 AM JTC1234567 notifications@github.com wrote:

Ah no I mean if you have a look on the link you sent me and search crumb

the cheapest is listed as 'Crumb124 V4 USB RS485 Modul' however when you click on it the description says 'crumb128-4.0'. is that one for 15 euros? Just want to make sure it's the correct one?

I've had issues getting the Java project to work, another chap wrote some software called 'forddiag' which is free but you have to pay for a cable with hardware built in. Would you project be compatible with this as it's just acting as a buffer?

Get Outlook for Androidhttps://aka.ms/ghei36

From: babroval notifications@github.com Sent: Sunday, January 31, 2021 10:12:46 AM To: babroval/ford-eec-iv-diagnostic < ford-eec-iv-diagnostic@noreply.github.com> Cc: JTC1234567 joeclarke_54@hotmail.com; Author < author@noreply.github.com> Subject: Re: [babroval/ford-eec-iv-diagnostic] Compatibility (#3)

Yes, it looks like you have got one of the latest Escorts with DCL. The project was written specifically for Atmega and I don't know other devices, sorry.

On Sun, Jan 31, 2021 at 9:39 AM JTC1234567 notifications@github.com wrote:

My model is Mk6 2001 finesse 1.6ltr. I'm not sure on ECU code, would have to pull out and check. It's the latter one with digital display on spedo. I'm pretty sure the pins 18&19 are the dcl connectors as I've looked into diagnostics before (it doesn't have the led flash codes connector on engine bay) but not had much success.

Can I not use the crumb-124 as it's only $15?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub <

https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770354252

, or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AIGTGENFJRE6GLRWD4TZLC3S4UQL5ANCNFSM4WZDR4BQ

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<

https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770358227 , or unsubscribe<

https://github.com/notifications/unsubscribe-auth/ASUZSBPWANTYYYDOBHANMILS4UUJ5ANCNFSM4WZDR4BQ

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770359015 , or unsubscribe < https://github.com/notifications/unsubscribe-auth/AIGTGEJ7ARWU6RJF2S75EGLS4UVD5ANCNFSM4WZDR4BQ

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub< https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770364140>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/ASUZSBO4UQYCLUO3SEFCKQ3S4U2LFANCNFSM4WZDR4BQ

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/babroval/ford-eec-iv-diagnostic/issues/3#issuecomment-770365428, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIGTGENN7FSHCSX2KPYWCWLS4U3RZANCNFSM4WZDR4BQ .

JTC1234567 commented 3 years ago

Thank you for the tutorial, I will give it a go. I was wondering, if I was to swap the cluster/speedo to a different one the odometer reading will be different. I have the digital dails, so the odometer reading is stored in the eeprom inside the cluster. Can the odometer reading be changed through your program via the ECU?

babroval commented 3 years ago

Sorry, it is only for engines