Atari STE link - Githubissues

baldengineer / bit-preserve

Project for capturing vintage, classic, aka old computer schematics in KiCad.

Other

368 stars 46 forks source link

Atari STE link #97

Open mrand opened 2 years ago

mrand commented 2 years ago

Don't know if you'd want to clone some or all, or just put a link to it (at the risk that the repo goes away someday): https://github.com/sporniket/retro-computer-clean-schematics/issues/52#issuecomment-983492590

sporniket commented 2 years ago

Hi, you should use this one : https://github.com/sporniket/kicad-conversions--atari-ste-motherboard--c300780-001

I see 2 ways :

Either git submodule add https://github.com/sporniket/kicad-conversions--atari-ste-motherboard--c300780-001 in the Atari folder, because my repo is huge : there is a set of high-res pictures of the motherboard (component side and bottom side)
Or get the standalone Kicad project archive from v1.0.0 release and unzip it in the Atari folder.

On a side note, I have several project referenced as submodules, that may be of interest :

https://github.com/sporniket/kicad-scripts the set of script that I used to generate my symbols from a normalized markdown datasheet
https://github.com/sporniket/kicad-symbols-generated the generated symboles sources, that use the previous project
https://github.com/sporniket/kicad-footprints-handmade the footprint I used
https://github.com/sporniket/kicad-symbols-handmade maybe for the reset button and the variable coil