search

balena-io / etcher

Flash OS images to SD cards & USB drives, safely and easily.
https://etcher.io/
Apache License 2.0
29.64k stars 2.1k forks source link

balea Etcher 1.7.9 - stucks on "Finishing" #3812

Closed JOLOalpha closed 1 year ago

JOLOalpha commented 2 years ago

Hi, I started flashing an image file to a USB stick, solidly works, then stucks in state "Finishing" since allready 1 hour. Could you kindly help me?

mcraa commented 2 years ago

Did you check the contents of the USB stick? It could be done already. Can you open the devtools (Ctrl + Shift + I) and check what logs are there?

JOLOalpha commented 2 years ago

Hi,

thanks a lot for your feedback. I canceled the action „Finishing“, took a shot oft the files (attached), formated the USB stick and started the flashing meanwhile again.

The iso files name contains 3 dots. Could this be an issue? -> SIMATIC_IPC_Image_PartitionCreator_V3.6.2.img

@.***

Freundliche Grüße / Best regards Tobias Rademacher

@.***

TOBIAS RADEMACHER AUTOMATION ENGINEER An der Garnbleiche 4 52349 Düren T +49 2421 307 570 M +49 173 5478 032 @.**@.> www.tunnelservicegroup.dehttp://www.tunnelservicegroup.de/

Von: mcraa @.> Gesendet: Donnerstag, 15. September 2022 11:36 An: balena-io/etcher @.> Cc: Tobias Rademacher @.>; Author @.> Betreff: Re: [balena-io/etcher] balea Etcher 1.7.9 - stucks on "Finishing" (Issue #3812)

Did you check the contents of the USB stick? It could be done already. Can you open the devtools (Ctrl + Shift + I) and check what logs are there?

— Reply to this email directly, view it on GitHubhttps://github.com/balena-io/etcher/issues/3812#issuecomment-1247845059, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3CUQGLXCFR22CDRE5A3XODV6LUXPANCNFSM6AAAAAAQNGITIE. You are receiving this because you authored the thread.Message ID: @.***>

JOLOalpha commented 2 years ago

Hi,

stucking in „Finishing“ again. Here we have the part of the logg with errors:

@.***

The logg ends with:

@.***

Should this image be okay?

Thanks before!

Freundliche Grüße / Best regards Tobias Rademacher

@.***

TOBIAS RADEMACHER AUTOMATION ENGINEER An der Garnbleiche 4 52349 Düren T +49 2421 307 570 M +49 173 5478 032 @.**@.> www.tunnelservicegroup.dehttp://www.tunnelservicegroup.de/

Von: mcraa @.> Gesendet: Donnerstag, 15. September 2022 11:36 An: balena-io/etcher @.> Cc: Tobias Rademacher @.>; Author @.> Betreff: Re: [balena-io/etcher] balea Etcher 1.7.9 - stucks on "Finishing" (Issue #3812)

Did you check the contents of the USB stick? It could be done already. Can you open the devtools (Ctrl + Shift + I) and check what logs are there?

— Reply to this email directly, view it on GitHubhttps://github.com/balena-io/etcher/issues/3812#issuecomment-1247845059, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3CUQGLXCFR22CDRE5A3XODV6LUXPANCNFSM6AAAAAAQNGITIE. You are receiving this because you authored the thread.Message ID: @.***>

mcraa commented 2 years ago

I think not all is visible in the github issue of what you send in email.

lurch commented 2 years ago

Yeah, replying to a GitHub issue via email ignores any attachments / images / etc. AFAIK you can only add attachments to a Github issue by visiting the GH website (so in this case https://github.com/balena-io/etcher/issues/3812 ).

JOLOalpha commented 2 years ago

Hi,

yeah, this is not the complete logg.

I only sent you two shots - the parts marked as warning and the finish.

Freundliche Grüße / Best regards Tobias Rademacher

@.***

TOBIAS RADEMACHER AUTOMATION ENGINEER An der Garnbleiche 4 52349 Düren T +49 2421 307 570 M +49 173 5478 032 @.**@.> www.tunnelservicegroup.dehttp://www.tunnelservicegroup.de/

Von: mcraa @.> Gesendet: Donnerstag, 15. September 2022 13:13 An: balena-io/etcher @.> Cc: Tobias Rademacher @.>; Author @.> Betreff: Re: [balena-io/etcher] balea Etcher 1.7.9 - stucks on "Finishing" (Issue #3812)

I think not all is visible in the github issue of what you send in email.

— Reply to this email directly, view it on GitHubhttps://github.com/balena-io/etcher/issues/3812#issuecomment-1247955046, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A3CUQGIRPPUYTL4WLDXTINLV6MACDANCNFSM6AAAAAAQNGITIE. You are receiving this because you authored the thread.Message ID: @.***>

lurch commented 2 years ago

@JOLOalpha Please look at the actual GitHub website, and you'll see that your images haven't appeared there.