Closed IvanRibakov closed 9 months ago
Hi @IvanRibakov .
In principle I don't see any problem with your implementation. By the way, I would check your configurations in config/config.exs
. In special, double check if you connected your Core to the solution. You should have the following on your configuration file:
# Configures the sippet core
config :sippet, Sippet.Core, ZCore
As an alternative, you can check https://github.com/balena/elixir-sippet-proxy . It is another library that uses elixir-sippet
to build a SIP proxy. It contains a Sippet.Core
implementation and that could be a good start point for your implementation.
(...)
Ah, I just checked. The https://github.com/balena/elixir-sippet-proxy code lacks a working config/config.exs
configuration. Basically you need a
# Configures the sippet core
config :sippet, Sippet.Core, Sippet.Proxy.Core
To make it start working.
Closing this issue due to inactivity. Please open a new issue if the problem persists.
Could you please provide a sample MyCore implementation? Reason I'm asking is that I've done all other configuration/setup (as explained in the readme) and I'm able to see
started plug 127.0.0.1:5060/udp
logged message when I start the application, however none of the log messages from my custom core implementation appear when I send a sample INVITE request.For the reference - my custom core implementation:
As you might have guessed - an Elixir beginner here so any other relevant comments/suggestions are welcome.