Closed function3d closed 4 months ago
If you go to the main panel with the graph, then click on the extruder/bed temperature, a numpad will popup. Does change it this way work during prints?
The screen while printing is not the same as the main screen when idle, no temperature field or popup during printing
On Wed, Jan 17, 2024, 00:21 ballaswag @.***> wrote:
If you go to the main panel with the graph, then click on the extruder/bed temperature, a numpad will popup. Does change it this way work during prints?
— Reply to this email directly, view it on GitHub https://github.com/ballaswag/guppyscreen/issues/26#issuecomment-1894677345, or unsubscribe https://github.com/notifications/unsubscribe-auth/A2GTVH7WRCILJHXZQE7VVCLYO4DRDAVCNFSM6AAAAABB5QU54WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJUGY3TOMZUGU . You are receiving this because you authored the thread.Message ID: @.***>
Ok, now I have seen that you can go back to the print window and then further back to the main window
I miss the possibility to change the temperatures (hotend and bed) while printing that was in the creality ui.
Thanks