Can't go back to status screen

ballaswag / guppyscreen

A native Touch UI for 3D Printers running Klipper/Moonraker.

GNU General Public License v3.0

166 stars 14 forks source link

Can't go back to status screen #50

Closed Unwrapped3 closed 2 months ago

Unwrapped3 commented 2 months ago

Whenever I leave the print status screen there is no way to come back, leaving me with Jo way to control the print from the touch screen. Sometimes I get a small icon up top on the home screen that a print is ongoing, sometimes this icon is also missing. However, when I do have it and press it, the input menu for extruder temperature pops up instead of opening the print status screen.

Mainsail version: 0.8.0-319gf0ae5179 Guppy version: 0.0.21-beta

Would appreciate any help!

ballaswag commented 2 months ago

You can click print again and there should be a status button to get back to the print process.

Unwrapped3 commented 2 months ago

You can click print again and there should be a status button to get back to the print process.

There is the "view job" button when I press Print but it does not work: nothing happens when pressed.

ballaswag commented 2 months ago

Get out of that prompt and click the status button. The mini status in the main panel is probably bugged.

Unwrapped3 commented 2 months ago

Get out of that prompt and click the status button. The mini status in the main panel is probably bugged.

Aha, yes, it works. Thanks a lot!

Btw I'm not sure if I should open an another issue but the Z-Offset status is shown incorrectly in the print status menu if you've adjusted it and saved the config.

At the same, in the Fine Tune menu it is correct though, leading to two different values being shown.