search

bambulab / BambuStudio

PC Software for BambuLab and other 3D printers
GNU Affero General Public License v3.0
2.02k stars 274 forks source link

Auto Flow rate calibration not working #2599

Open Obicom opened 1 year ago

Obicom commented 1 year ago

Bambu Studio Version

1.7.6.92

Where is the application from?

Bambu Lab github releases

OS version

Windows 11

Additional system information

No response

Printer

Bambu X1C

How to reproduce

  1. Go to Calibration
  2. Choose Flow rate - Auto-Calibration
  3. Lets the calibration run and wait for finish the job

Actual results

Always failed -> No value tried it in German and English language ... both failed

Expected results

valed value after run

Project file & Debug log uploads

floe_rate_cali

Checklist of files to include

dragon-eyes-bbl commented 1 year ago

Hi, may I know what filament did you use, and have you updated the printer firmware to OTA version 01.06.05.01 (20230921) or later?

Obicom commented 1 year ago

@dragon-eyes-bbl I tried it with Giantarm PLA HS red and Eryone PLA+ green on the high temperature plate. The used firmware is the latest one (version 01.06.05.01). Tried it several times with no success.

dragon-eyes-bbl commented 1 year ago

@Obicom Could you export the machine log and upload it to our ticket system. Once done please provide the ticket number, I can check it for you. thanks. https://bambulab.com/en/my/support/tickets

Obicom commented 1 year ago

@dragon-eyes-bbl here the ticket number: TECH_Bug report_EU_US230925371001

dragon-eyes-bbl commented 1 year ago

@dragon-eyes-bbl here the ticket number: TECH_Bug report_EU_US230925371001

Hi @Obicom Thanks for the log. It looks like the filament you used is incompatible with the auto flow rate calibration.

dragon-eyes-bbl commented 1 year ago

@dragon-eyes-bbl here the ticket number: TECH_Bug report_EU_US230925371001

Hi @Obicom Thanks for the log. It looks like the filament you used is incompatible with the auto flow rate calibration. Could be the quite reflective surface finished destroying the lights. Auto flow rate requires an even surface reflection. It is possible that the filament works well with flow dynamic but fails with flow rate. Please try another filament with a matte finish. Thanks.

BambulabRobot commented 2 months ago

This issue has been marked as inactive due to no response for 90 days.