search

bambulab / BambuStudio

PC Software for BambuLab and other 3D printers
GNU Affero General Public License v3.0
2.18k stars 292 forks source link

Inconsistency, gaps on top layer #347

Open CptHungarian opened 2 years ago

CptHungarian commented 2 years ago

If there are small details on the top layer, typically numbers or letters Bambu Studio can't seem to handle them properly. Instead of filling out the top layer consistently, it creates internal walls and gap fills around and under the letters and numbers. This is a good example (screw gauge by Bambu Lab): image image The same STL sliced with PrusaSlicer 2.5.0: image image

SaltWei commented 2 years ago

This is same behaviour with superslicer which caused by "only one wall on top surface". Disable this option can be a workaround.

Should be improved in the future.

CptHungarian commented 2 years ago

This is same behaviour with superslicer which caused by "only one wall on top surface". Disable this option can be a workaround.

Should be improved in the future.

Yep, that fixes it. Thank you!

SaltWei commented 2 years ago

You are welcome!

Disable this option is just workaround. Should be root fixed to be normal even when enable this option. We will keep on it further.

AbeFM commented 2 years ago

Came to report the same issue, and the same work around. This used to slice fine on PrusaSlicer - but that was without the one wall option even available. One Wall off: image One Wall On: image

image Unsure if it's due to the stuff on top, but I did it twice, once it had gap-fill in the middle, now it don't.. Just sharing in the hopes it helps.

djngnear commented 1 year ago

I thought maybe your issue was similar to mine.

https://github.com/bambulab/BambuStudio/issues/708