Tree Support/Filament Spaghetti

[jvlight14]

Bambu Studio Version

1.8.4.51

Where is the application from?

Bambu Lab Official website

OS version

Mac Sonoma Version 14.0

Additional system information

Model Name: MacBook Pro Model Identifier: MacBookPro18,3 Model Number: Z15G0021LLL/A Chip: Apple M1 Pro Total Number of Cores: 8 (6 performance and 2 efficiency) Memory: 32 GB System Firmware Version: 10151.1.1 OS Loader Version: 10151.1.1 Serial Number (system): J9DY2HLX7W Hardware UUID: C4B1F5B7-D478-55A7-81C4-BE55F72AF028 Provisioning UDID: 00006000-000219D926D8801E Activation Lock Status: Disabled

Chipset Model: Apple M1 Pro Type: GPU Bus: Built-In Total Number of Cores: 14 Vendor: Apple (0x106b) Metal Support: Metal 3

Memory: 32 GB Type: LPDDR5 Manufacturer: Hynix

Printer

Bambu Lab P1S

How to reproduce

1. Enable Supports
2. Select Tree (auto)
3. Presets are left at default
4. Slice STL
5. Send to printer

Actual results

I have had two helmet prints produce spaghettification of tree supports on the inner part of the helmet dome.

Expected results

The print should print with no support failures. Others have reported this issue.

Project file & Debug log uploads

debug_Mon_Feb_05_08_31_31_2173.log.4.zip debug_network_Mon_Feb_05_08_33_25.log.enc.zip

Checklist of files to include

• [X] Log file
• [ ] Project file

[tangketan]

The log file is not helpful for this issue. Would you please share the 3mf or the video of printing?

[jvlight14]

Hello,

I have attached the video (red Deadpooll helmet). I did turn the light on and off at times during printing.

I have also attached the other helmet that had a similar problem occur.

Thank you in advance for your feedback and assistance.

Justin video_2024-02-0413-36-23.avi.zip <https://drive.google.com/file/d/1h74lrqHocxMKs3UTaMC2n3A6IUhOiP7/view?usp=drive_web> video_2024-02-06_12-13-54.avi.zip https://drive.google.com/file/d/1k3QL_ld9JzupH9skr2n1EmIl4NrZgnS7/view?usp=drive_web

On Sat, Feb 17, 2024 at 11:11 PM tangketan @.***> wrote:

The log file is not helpful for this issue. Would you please share the 3mf or the video of printing?

— Reply to this email directly, view it on GitHub https://github.com/bambulab/BambuStudio/issues/3551#issuecomment-1950956469, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF6PWBOWBSUJVJ6TFF2WWRLYUF5QPAVCNFSM6AAAAABC4S3XMGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJQHE2TMNBWHE . You are receiving this because you authored the thread.Message ID: @.***>

-- Justin Light

(423) 470-2177

@.***

[tangketan]

Hi, please grant me the read permission of the videos.

[jvlight14]

Done.

On Thu, Mar 7, 2024 at 4:34 AM tangketan @.***> wrote:

Hi, please grant me the read permission of the videos.

— Reply to this email directly, view it on GitHub https://github.com/bambulab/BambuStudio/issues/3551#issuecomment-1983097133, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF6PWBO6LT75BEXXOBO24NDYXAYCJAVCNFSM6AAAAABC4S3XMGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBTGA4TOMJTGM . You are receiving this because you authored the thread.Message ID: @.***>

[tangketan]

The tree supports were too high and fell just before reaching the top. I'll try to improve the strength and stability.

[BambulabRobot]

This issue has been marked as inactive due to no response for 90 days.