Remove small overhangs having issues with angled overhang

[tonyalpskog]

Bambu Studio Version

1.8.4.51

Where is the application from?

Bambu Lab Official website

OS version

Windows 11

Additional system information

No response

Printer

P1S

How to reproduce

Here is a part with a dovetail cut out. Support looks good. But the part might have has some small overhangs that I want to skip support for and therefore choose to tick "Remove small overhangs".

Actual results

Now even the most obvious need for support on the free hanging dovetail cut out is also removed. No need to say that this print will fail when the top of the cut out is printed in open air with just one side bridge support. And the lower dovetail edge is about 3 cm long so there is no practically useable logic for that slicing result in this case. Plastic just printed and collapsing in the open air.

Expected results

When there is no bridge (support on each side of an overhang) the slicer should not remove the support needed. There is not a real bridge in this case no matter in which direction the part is printed. There is only a bridge if the lowest part of the overhang has any support.

Project file & Debug log uploads

Missing dovetail support.zip

Checklist of files to include

• [ ] Log file
• [X] Project file

[tangketan]

Thanks for reporting the bug. We'll fix it soon.

[BambulabRobot]

This issue has been marked as inactive due to no response for 90 days.