Closed Canadian-Gamer closed 3 months ago
can you slice it successfully on PC?
Yes I can. I sliced it and printed it. I can send you a picture of the printed copy.
From: Shikieiki @.> Sent: Tuesday, May 14, 2024 9:02:56 PM To: bambulab/BambuStudio @.> Cc: Canadian-Gamer @.>; Author @.> Subject: Re: [bambulab/BambuStudio] Bambu Studio Very Slow (Issue #4070)
can you slice it successfully on PC?
— Reply to this email directly, view it on GitHubhttps://github.com/bambulab/BambuStudio/issues/4070#issuecomment-2111491818, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BIP4WL5FNX2AES4T3GUUDF3ZCLF6BAVCNFSM6AAAAABHXBVGVSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJRGQ4TCOBRHA. You are receiving this because you authored the thread.Message ID: @.***>
so just upload to MW failed or very slow?
Does it cost hours to slice it on PC?
I don’t know what you mean by cost hours.
It takes longer than it did before the update to Bambu studio yesterday. It seems like all my Hueforges take longer to slice since the update, and I had been uploading one a day at least to Makerworld for about 3 months now
From: Corey Foy @.> Sent: Tuesday, May 14, 2024 9:08:39 PM To: bambulab/BambuStudio @.>; bambulab/BambuStudio @.> Cc: Author @.> Subject: Re: [bambulab/BambuStudio] Bambu Studio Very Slow (Issue #4070)
Yes I can. I sliced it and printed it. I can send you a picture of the printed copy.
From: Shikieiki @.> Sent: Tuesday, May 14, 2024 9:02:56 PM To: bambulab/BambuStudio @.> Cc: Canadian-Gamer @.>; Author @.> Subject: Re: [bambulab/BambuStudio] Bambu Studio Very Slow (Issue #4070)
can you slice it successfully on PC?
— Reply to this email directly, view it on GitHubhttps://github.com/bambulab/BambuStudio/issues/4070#issuecomment-2111491818, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BIP4WL5FNX2AES4T3GUUDF3ZCLF6BAVCNFSM6AAAAABHXBVGVSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJRGQ4TCOBRHA. You are receiving this because you authored the thread.Message ID: @.***>
Yes in this instance just the upload to makerworld is failing. It is saying the slicing time exceeds the limit
From: Corey Foy @.> Sent: Tuesday, May 14, 2024 9:35:07 PM To: bambulab/BambuStudio @.>; bambulab/BambuStudio @.> Cc: Author @.> Subject: Re: [bambulab/BambuStudio] Bambu Studio Very Slow (Issue #4070)
I don’t know what you mean by cost hours.
It takes longer than it did before the update to Bambu studio yesterday. It seems like all my Hueforges take longer to slice since the update, and I had been uploading one a day at least to Makerworld for about 3 months now
From: Corey Foy @.> Sent: Tuesday, May 14, 2024 9:08:39 PM To: bambulab/BambuStudio @.>; bambulab/BambuStudio @.> Cc: Author @.> Subject: Re: [bambulab/BambuStudio] Bambu Studio Very Slow (Issue #4070)
Yes I can. I sliced it and printed it. I can send you a picture of the printed copy.
From: Shikieiki @.> Sent: Tuesday, May 14, 2024 9:02:56 PM To: bambulab/BambuStudio @.> Cc: Canadian-Gamer @.>; Author @.> Subject: Re: [bambulab/BambuStudio] Bambu Studio Very Slow (Issue #4070)
can you slice it successfully on PC?
— Reply to this email directly, view it on GitHubhttps://github.com/bambulab/BambuStudio/issues/4070#issuecomment-2111491818, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BIP4WL5FNX2AES4T3GUUDF3ZCLF6BAVCNFSM6AAAAABHXBVGVSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJRGQ4TCOBRHA. You are receiving this because you authored the thread.Message ID: @.***>
OK, I will talk to the concerned staff about that.
they said that it did have problems last night, but already fixed it now. Could you try it again?
Yah it still won't upload, it is timing out, this isn't my longest or most detailed design, as a matter of fact my printing history shows that it only took 7.3 hours so I'm surprised this one is giving me the issue
@Canadian-Gamer Hi, it can upload to MW now, the bug had been fixed. I've confirmed that.
Bambu Studio Version
1.9.1.66
Where is the application from?
Bambu Lab Official website
OS version
Windows 10
Additional system information
I dont have that info at hand. where do i find it
Printer
P1S
How to reproduce
Slice a hueforge file.
Actual results
Very slow, errors about floating regions, this all started last night after the update
Expected results
Faster slicing. upload to makerworld successfull
Project file & Debug log uploads
Dallas Cowboys NFL 3MF.zip
Checklist of files to include