Rotation bug when rotating a Z or Y mirrored part

[PanamonCreel]

Bambu Studio Version

1.9.1.66

Where is the application from?

Bambu Lab Official website

OS version

WIN10

Additional system information

No response

Printer

P1S

How to reproduce

1. Mirror a part on the plate on Z or Y axis
2. Rotate the Mirrored part on any axis, observe part flipping along the axis it was mirrored on initially
3. Rotate the Mirrored part again on any axis, observe part flipping again along the axis it was mirrored on initially

Actual results

Part will flip along the initial mirrored axis with each rotation increment no matter which rotation axis was used. So if mirrored along Z it will flip the part along the Z axis when rotated. If mirrored along Y the part will flip along Y when rotated. When mirrored along X the part will not flip when rotated (as it should be)

Expected results

a mirrored part should not flip around with each rotation operation.

Project file & Debug log uploads

RotationBugExample.zip

Checklist of files to include

• [ ] Log file
• [X] Project file

[Haidiye00]

Can you record a gif to describe your problem? Thank you

[PanamonCreel]

Certainly can do that

[PanamonCreel]

Rotation bug still exists with version 1.9.2.57

[Haidiye00]

Thank you for your GIF. We will investigate the cause as soon as possible

[jedthe3rd]

Just got my X1C today and I ran into this issue. I am on 1.9.3.50

[Haidiye00]

The problem has been identified and is currently being tested