Supports with PLA_SUPPORT interface are very difficult to remove

[Gerard26260]

Bambu Studio Version

1.9.1.66

Where is the application from?

Bambu Lab Official website

OS version

Windows 11

Additional system information

No response

Printer

Bambulab X1C

How to reproduce

Print a file with Bambula PLA basic filament and support using PLA_SUPPORT at the interface

Actual results

The main support is easy to remove but at the interface with the printed object it is impossible to remove the pla-support without scraping. It was easier with version 1.8.

Expected results

The interface support must go directly with the main support

Project file & Debug log uploads

Beagle.zip

Checklist of files to include

• [ ] Log file
• [X] Project file

[Gerard26260]

This issue is also reported by other users on the reddit server

[Gerard26260]

Issue has been closed by error

[zhimin-zeng-bambulab]

https://github.com/bambulab/BambuStudio/issues/4116 Duplicate BUG, ​​only keep one

[doncaruana]

@zhimin-zeng-bambulab - This bug is not fixed. I tested the exact same model with 1.9.03.50 and 1.8.04.51 with the same model and the supports are relatively easy to remove with 1.8 and almost impossible with 1.9.